Search NASA⌕ Search

SEARCH · Search NASA

Results for “Comparison study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Experimental Study on the Effect of Localized Blockages on the Friction Factor of a 61-Pin Wire-Wrapped Bundle

Abstract The thermal-hydraulic behavior of the flow in rod bundles has motivated numerous experimental and computational investigations. Previous studies have identified potential for accumulation of debris within the small subchannels of typical wire-wrapped assemblies with subsequent total or partial blockage of subchannel coolant flow. A test campaign was conducted to study the effects of localized blockages on the bundle averaged friction factor of a tightly packed wire-wrapped rod bundle. Blockages were installed within the bundle, and fluid pressure drop was measured across one wire pitch for a Reynolds number range of 500–17,200. The Darcy–Weisbach friction factor of the perturbed rod bundle geometry was compared with that of the unblocked bundle, as well as with the predictions of a well-established friction factor correlation. Differing effects based on blockage size and location for various flow regimes were studied. A number of conclusions can be made about the effects of the blockages on the friction factor, such as an increasing effect of the blockage on friction factor with an increase in Reynolds number, a change in flow behavior in the turbulent transition flow regime near Reynolds number 3000, differences in effect on friction factor for different types of subchannel blockage, and a nonlinear trend in friction factor variation with flow area impeded for edge subchannels. To this end, all data and quantified uncertainty produced in this study are made available for comparison and validation of advanced computational tools.

Engineering↗

Growth and coalescence control of inclined c-axis polar and semipolar GaN multilayer structures grown on Si(111), Si(112), and Si(115) by metalorganic vapor phase epitaxy

Herein, silicon substrates in alternative orientations from the commonly used Si(111) were used to enable the growth of polar and semipolar GaN-based structures by the metalorganic vapor phase epitaxy method. Specifically, Si(112) and Si(115) substrates were used for the epitaxial growth of nitride multilayer structures, while the same layer schemes were also deposited on Si(111) for comparison purposes. Multiple approaches were studied to examine the influence of the seed layers and the growth process conditions upon the final properties of the GaN/Si(11x) templates. Scanning electron microscope images were acquired to examine the topography of the deposited samples. It was observed that the substrate orientation and the process conditions allow control to produce an isolated GaN block growth or a coalesced layer growth, resulting in inclined c-axis GaN structures under various forms. The angles of the GaN c-axis inclination were determined by x-ray diffraction measurements and compared with the results obtained from the analysis of the atomic force microscope (AFM) images. The AFM image analysis method to determine the structure tilt was found to be a viable method to estimate the c-axis inclination angles of the isolated blocks and the not-fully coalesced layers. The quality of the grown samples was characterized by the photoluminescence method conducted at a wide range of temperatures from 77 to 297 K, and was correlated with the sample degree of coalescence. Using the free-excitation peak positions plotted as a function of temperature, analytical Bose-Einstein model parameters were fitted to obtain further information about the grown structures.

42 ENGINEERING↗

Specific features of sample preparation from amorphous aluminum alloys for transmission electron microscopy

An aluminum amorphous alloy doped with transition (Fe and Ni) and rare earth (La) metals has been used as an object of systematic study of the structural transformations that are characteristic of different methods of sample preparation for transmission electron microscopy (the mechanical tearing of ribbons, electrochemical thinning, and Ar{sup +}-ion etching under different conditions). The results of X-ray diffraction analysis and a calorimetric study of the structure in comparison with electron microscopy data made it possible to determine the optimal method of sample preparation, which ensures minimum distortions in the structure of metastable amorphous alloys with a low crystallization temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Comparison of the Wavelet and Gabor Transforms in the Spectral Analysis of Nonstationary Signals

Two approaches to the analysis of nonstationary random processes (short-time Fourier transform and continuous wavelet transform) are compared. The comparison is based on the study of several model signals with known time–frequency characteristics. The application of the approaches is also analyzed in the study of spectral dynamics of fluorescence of cold atomic clouds excited by pulsed radiation. It is shown that the two approaches make it possible to reveal the main specific features of the signals under study. However, the continuous wavelet transform has several advantages, since the optimal conditions for the analysis using the short-time Fourier transform are reached if additional calculations aimed at determination of the optimal width of the window are performed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Biogeochemical Fluxes for Three Bioenergy Crops

Perennial crops have been the focus of bioenergy research and development for their sustainability benefits associated with high soil carbon (C) and reduced nitrogen (N) requirements. However, perennial crops mature over several years and their sustainability benefits can be negated through land reversion. A photoperiod‐sensitive energy sorghum (Sorghum bicolor) may provide an annual crop alternative more ecologically sustainable than maize (Zea mays) that can more easily integrate into crop rotations than perennials, such as miscanthus (Miscanthus × giganteus). This study presents an ecosystem‐scale comparison of C, N, water and energy fluxes from energy sorghum, maize and miscanthus during a typical growing season in the Midwest United States. Gross primary productivity (GPP) was highest for maize during the peak growing season at 21.83 g C m−2 day−1, followed by energy sorghum (17.04 g C m−2 day−1) and miscanthus (15.57 g C m−2 day−1). Maize also had the highest peak growing season evapotranspiration at 5.39 mm day−1, with energy sorghum and miscanthus at 3.81 and 3.61 mm day−1, respectively. Energy sorghum was the most efficient water user (WUE), while maize and miscanthus were comparatively similar (3.04, 1.75 and 1.89 g C mm−1 H2O, respectively). Maize albedo was lower than energy sorghum and miscanthus (0.19, 0.26 and 0.24, respectively), but energy sorghum had a Bowen ratio closer to maize than miscanthus (0.12, 0.13 and 0.21, respectively). Nitrous oxide (N2O) flux was higher from maize and energy sorghum (8.86 and 12.04 kg N ha−1, respectively) compared with miscanthus (0.51 kg N ha−1), indicative of their different agronomic management. These results are an important first look at how energy sorghum compares to maize and miscanthus grown in the Midwest United States. This quantitative assessment is a critical component for calibrating biogeochemical and ecological models used to forecast bioenergy crop growth, productivity and sustainability.

Field Data↗

Demonstration of MOOSE-based Griffin reactor physics, code for heterogeneous lead-cooled fast reactor analysis

The MOOSE-based reactor physics code Griffin was assessed on a heterogeneous pin-resolved model of a prototype lead-cooled fast reactor assembly. This model was developed in preparation for future use in MOOSE-based multiphysics calculations for computing hot channel factors. Heterogeneous multigroup cross sections were prepared using the fast reactor multi-group cross section processing code MC{sup 2}-3 using a two-step method. Griffin simulations were performed using the DFEM-SN solver on 576 cores on Argonne's LCRC cluster. Diffusion-based acceleration methods were applied (NDA and CMFD). Reference solutions were generated with continuous energy MCNP and the hybrid MOC/finite element solver PROTEUS-MOC for code-to-code comparison. Space-angle convergence studies were conducted to observe convergence in k-eigenvalue and axial pin power distributions. The fully resolved Griffin calculation was within 68 pcm of the MCNP eigenvalue and exhibited max 1.2% relative error in the axial pin power distribution. Griffin produced nearly identical results to PROTEUS-MOC when using the same 9-group multigroup cross-section set. Griffin demonstrated favorable scaling in wall-clock time and memory usage when using diffusion-based acceleration methods. Griffin is capable of simulating the pin-resolved heterogeneous LFR assembly with good accuracy and performance, and is suitable for future use in coupled high-fidelity hot channel factor simulations. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Idling - cruising the fuel inefficiency highway.

What is the purpose of idling? The scale of idling can be small, as when parents idle their vehicles while waiting for their children outside of school, or it can be large, as when ocean liners are in port. In many cases, the primary purpose for idling is to control the temperature of a passenger or freight compartment. Large line-haul trucks idle overnight to keep fuel and the engine warm, for the resting driver's comfort, to mask out noises and smells, and for safety. In addition, all classes of trucks idle during the workday at ports and terminals, busy delivery sites, border crossings, and other work sites. They may be idling to enable slow movement in a queue (creep idling) or to provide other services. Bus drivers also idle their vehicles while they wait for passengers and to warm up in the morning. Even locomotive engines are idled so they start, for hotel load, to keep the battery charged, to keep the toilet water from freezing, and for air brakes, or because the operator idles out of habit. Although this document focuses on long-haul trucks, much of the information applies to other vehicles as well. The impacts of idling are substantial, with as much as 6 billion gallons of fuel burned unnecessarily each year in the United States at a cost of over $20 billion. The extra hours of engine operation also cost the owners money for more frequent maintenance and overhauls. In addition, idling vehicles emit particulates (PM{sub 10}), nitrogen dioxide (NO{sub 2}), carbon monoxide (CO), and carbon dioxide (CO{sub 2}). These emissions, along with noise from idling vehicles, have led to many local and state restrictions on idling. Two main factors have combined to create a surge of interest in idling reduction (IR): (1) Increasing restrictions on idling for heavy vehicles and (2) The price of diesel fuel. Because stakeholders focus their efforts on improving different factors (air quality, fuel economy, noise level), they do not necessarily agree on the most advantageous technological alternatives to implement. In addition, although many equipment manufacturers have tried to educate customers and government agencies, they often provide conflicting claims about the comparative merits of different devices. This makes it difficult for truck owners to choose the right equipment for their needs. In this study, we present the first comparison of IR technologies with each other and with idling on the basis of both costs and full fuel-cycle emissions, for different locations, fuel prices, and idling patterns. The preferences described are for the technologies that reduce total emissions the most and cost truck owners the least. We also discuss how regulatory issues and legislation affect IR, what financial incentives help to promote IR, and how outreach and education approaches can be adopted to reduce the need to idle. Finally, we offer a prediction of how future research and development (R&D), regulations, and citizen involvement can help to improve fuel economy and clean the air.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Impact of Wind Development on County-Level Income and Employment: A Review of Methods and an Empirical Analysis (Fact Sheet)

To gain an understanding of the long-term county-level impacts from a large sample of wind power projects and to understand the potential significance of methodological criticisms, the U.S. Department of Agriculture, the Lawrence Berkeley National Laboratory, and NREL recently joined efforts to complete a first-of-its-kind study that quantifies the annual impact on county-level personal incomeresulting from wind power installations in nearly 130 counties across 12 states. The results of this study, as well as a comparison with the prior county-level estimates generated from input-output models, are summarized here.

17 WIND ENERGY↗

Effects of Gamma Irradiation on EPDM Elastomers (Revision 1)

Two formulations of EPDM elastomer, one substituting a UV stabilizer for the normal antioxidant in this polymer, and the other the normal formulation, were synthesized and samples of each were exposed to gamma irradiation in initially pure deuterium gas to compare their radiation stability. Stainless steel containers having rupture disks were designed for this task. After 130 MRad dose of cobalt-60 radiation in the SRNL Gamma Irradiation Facility, a significant amount of gas was created by radiolysis; however the composition indicated by mass spectroscopy indicated an unexpected increase in the total amount deuterium in both formulations. The irradiated samples retained their ductility in a bend test. No change of sample weight, dimensions, or density was observed. No change of the glass transition temperature as measured by dynamic mechanical analysis was observed, and most of the other dynamic mechanical properties remained unchanged. There appeared to be an increase in the storage modulus of the irradiated samples containing the UV stabilizer above the glass transition, which may indicate hardening of the material by radiation damage. Revision 1 adds a comparison with results of a study of tritium exposed EPDM. The amount of gas produced by the gamma irradiation was found to be equivalent to about 280 days exposure to initially pure tritium gas at one atmosphere. The glass transition temperature of the tritium exposed EPDM rose about 10°C. over 280 days, while no glass transition temperature change was observed for gamma irradiated EPDM. This means that gamma irradiation in deuterium cannot be used as a surrogate for tritium exposure.

36 MATERIALS SCIENCE↗

Molecular Regulation of Photosynthetic Carbon Dioxide Fixation in Nonsulfur Purple Bacteria

The overall objective of this project is to determine the mechanism by which a transcriptional activator protein affects CO 2 fixation (cbb) gene expression in nonsulfur purple photosynthetic bacteria, with special emphasis to Rhodobacter sphaeroides and with comparison to Rhodopseudomonas palustris. These studies culminated in several publications which indicated that additional regulators interact with the master regulator CbbR in both R. sphaeroides and R. palustris. In addition, the interactive control of the carbon and nitrogen assimilatory pathways was studied and unique regulatory signals were discovered.

59 BASIC BIOLOGICAL SCIENCES↗

High Speed Tribology of the Head-Disk Interface by Computer Simulation Final Report CRADA No. TC-297-92-C

The purpose of this project is to develop and validate a molecular dynamics model of nanoscale tribological processes occurring inside the head-disk interface of magnetic recording devices. Within the three years of the project the partners will: write a new molecular dynamics computer simulation code for growth, sliding and impact inside the head-disk interface; identify accurate models for chemical bonding within coatings used to protect magnetic surfaces, especially amorphous carbon thin films; simulate the growth of amorphous carbon thin films and analyse the resulting chemical bonding; simulate friction and wear processes relevant to the head-disk interface; and validate the model through comparison with AFM and nanoindenter studies of friction and wear of amorphous carbon thin films.

36 MATERIALS SCIENCE↗

Evaluating Radiation Impact on Superconducting Transmon Qubits in Above and Underground Facilities

Superconducting qubits can be sensitive to sudden energy deposits into the substrate from cosmic rays and ambient radioactivity. While previous studies have primarily focused on exploring correlated effects over time and distance due to cosmic rays, this study uniquely offers a direct comparison of a transmon qubit's response at Fermilab SQMS above-ground facilities and the deep-underground Gran Sasso Laboratory (INFN-LNGS, Italy). Despite the vastly different radiation environments, we observe a similar average qubit lifetime (T1) of approximately 80 microseconds at both sites. We then employ a fast decay detection protocol and investigate the time structure, sensitivity, and relative rates of triggered events due to radiation versus intrinsic noise. We compare the above and underground performance of several high-coherence qubits with similar designs. Our findings reveal no significant difference in events with radiation-like signatures between above-ground and underground conditions for these sapphire and niobium-based transmon qubits. This suggests that most such events are likely due to other noise sources, which predominantly contribute to single-qubit errors in contemporary transmon qubits. By exposing the qubits to gamma sources with varying activity levels, we further evaluate their response to radiation in a low-background environment. The results show that qubits can indeed detect particle impacts; however, this capability is only realized by substantially reducing other noise sources, which in turn affects detection efficiency [1].

Roy, Tanay↗

PISCES two-detector covariance matrix fit for the NOvA Experiment

NOvA is a long-baseline neutrino oscillation experiment with two functionally identical detectors: a Near Detector (ND) at Fermilab, placed 1 km from the neutrino source, and a Far Detector (FD) located 810 km away from the ND in Minnesota. NOvA's primary physics goals are the precise measurements of neutrino oscillation parameters $\theta_{23}$ and $\Delta m^2_{32}$ , determine the neutrino mass ordering, and constrain the value of $\delta_{CP}$, via the study of muon neutrino to electron neutrino oscillation. In the standard NOvA three-flavor analysis, oscillation parameters are extracted using an extrapolation technique in which the ND data constrain the FD prediction through a ratio method. While this allows for systematic uncertainties sharing the same effects in both detectors to cancel, it remains an FD-only fit and does not fully leverage the constraining power of the high-statistics ND. This analysis proposes a simultaneous ND+FD fit using the PISCES method. PISCES (Parameter Inference with Systematic Covariance and Exact Statistics) is a framework designed to support complex configurations such as a joint ND+FD fit. This allows PISCES to take full advantage of the ND data to directly constrain systematic uncertainties across all samples. In PISCES, systematic uncertainties are encoded in a fractional covariance matrix, and statistical uncertainties are handled with a Poisson likelihood, making the approach well suited for low-statistics samples. For interpretability, we further use a Newton–Raphson + PCA method to recover per-systematic pulls from the covariance formulation. This poster presents the full PISCES joint ND+FD fit for the NOvA three-flavor analysis, describes its implementation and evaluates its performance through extensive robustness tests and fake data studies. It also provides a comparison between the PISCES joint ND+FD results and the standard NOvA extrapolation method.

Rajaoalisoa, Miriama [Cincinnati U.] (ORCID:000000↗

A Hybrid Energy System Workflow for Energy Portfolio Optimization

This manuscript develops a workflow, driven by data analytics algorithms, to support the optimization of the economic performance of an Integrated Energy System. The goal is to determine the optimum mix of capacities from a set of different energy producers (e.g., nuclear, gas, wind and solar). A stochastic-based optimizer is employed, based on Gaussian Process Modeling, which requires numerous samples for its training. Each sample represents a time series describing the demand, load, or other operational and economic profiles for various types of energy producers. These samples are synthetically generated using a reduced order modeling algorithm that reads a limited set of historical data, such as demand and load data from past years. Numerous data analysis methods are employed to construct the reduced order models, including, for example, the Auto Regressive Moving Average, Fourier series decomposition, and the peak detection algorithm. All these algorithms are designed to detrend the data and extract features that can be employed to generate synthetic time histories that preserve the statistical properties of the original limited historical data. The optimization cost function is based on an economic model that assesses the effective cost of energy based on two figures of merit: the specific cash flow stream for each energy producer and the total Net Present Value. An initial guess for the optimal capacities is obtained using the screening curve method. The results of the Gaussian Process model-based optimization are assessed using an exhaustive Monte Carlo search, with the results indicating reasonable optimization results. The workflow has been implemented inside the Idaho National Laboratory’s Risk Analysis and Virtual Environment (RAVEN) framework. The main contribution of this study addresses several challenges in the current optimization methods of the energy portfolios in IES: First, the feasibility of generating the synthetic time series of the periodic peak data; Second, the computational burden of the conventional stochastic optimization of the energy portfolio, associated with the need for repeated executions of system models; Third, the inadequacies of previous studies in terms of the comparisons of the impact of the economic parameters. The proposed workflow can provide a scientifically defendable strategy to support decision-making in the electricity market and to help energy distributors develop a better understanding of the performance of integrated energy systems.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Coupled Biological and Abiotic Mechanisms Driving Carbonyl Sulfide Production in Soils

Understanding soil production of the trace gas carbonyl sulfide (OCS) is key to its use as a tracer of ecosystem function. Underlying its application is the observation that vascular plants consume atmospheric OCS via their stomatal pores in proportion with CO2 photosynthesis and that soil fluxes of OCS are negligible in comparison. Recent soil-centered studies demonstrate that soils can produce OCS and contribute as much as a quarter of the atmospheric terrestrial flux. Despite the potential widespread importance of soil OCS emissions, insufficient data exist to predict variations in OCS production across ecosystems, and the chemical and biological drivers of OCS production are virtually unknown. In this study, we address this knowledge gap by investigating variables controlling OCS soil production including soil physical and chemical properties, microbial community composition, and sulfur speciation in two independent surveys. We found that soil OCS production was nearly ubiquitous across the 58 sites, increased exponentially with temperature, and was insensitive to visible light conditioning. Soil pH, N, and C/N were predictors of OCS soil production rates in both soil surveys. Patterns in soil S speciation and predicted microbial S-cycling pathways both pointed to S-containing amino acids such as cysteine and methionine and their derivatives as potential precursors for OCS production. Elevated sulfate levels were associated with OCS production in some soils. This study provides new mechanistic insight into OCS production in soils and presents strategies to represent soil OCS fluxes that facilitate the use of OCS as a tracer for leaf-level processes related to carbon and water cycling.

Meredith, Laura K. (ORCID:0000000342444366)↗

On the Orbital Elements of the Two-body Problem with Slowly Decreasing Mass: The Gyldén–Mestchersky Cases

We study the dynamics of two-body problems with gravitational parameters μ = μ(t) decreasing with the time. In particular we focus our attention on the behavior of the orbital elements in the first two Gyldén–Mestchersky cases: in the first case (GM-I) μ(t)=μ{sub 0}(1+αt){sup −1}, where μ{sub 0} is the constant initial value of the parameter and α a small positive constant. In the second case (GM-II) μ(t)=μ{sub 0}(1+2αt){sup −1/2}. In the GM-I problem, using a suitable transformation of the radius vector and the physical time, which reduces the original problem to a pure Kepler problem, we are able to obtain explicit analytical expressions of the orbital elements that hold true for all t⩾0 and therefore derive their asymptotic behavior. Moreover using the alternative scaled time these expressions show clearly their periodic and secular terms. For the GM-II problem a similar transformation to the GM-I problem leads to a perturbed Kepler problem with a radial direction perturbation. Although exact solutions in terms of elliptic functions may be obtained, the use of some integrals leads to analytical expressions of orbital elements that allow us to study their behavior. Finally, some comparisons between the time evolution of elements in both problems are also included.

79 ASTRONOMY AND ASTROPHYSICS↗

DOES THE MILKY WAY OBEY SPIRAL GALAXY SCALING RELATIONS?

It is crucial to understand how the Milky Way (MW), the galaxy we can study in the most intimate detail, fits in among other galaxies. Key considerations include the Tully–Fisher relation (TFR)—i.e., the tight correlation between luminosity ( L ) and rotational velocity ( V {sub rot})—and the three-dimensional luminosity–velocity–radius ( LVR ) scaling relation. Several past studies have characterized the MW as a 1–1.5 σ outlier to the TFR. This study re-examines such comparisons using new estimates of MW properties that are robust to many of the systematic uncertainties that have been a problem in the past and are based on assumptions consistent with those used for other spiral galaxies. Comparing to scaling relations derived from modern extragalactic data, we find that our Galaxy’s properties are in excellent agreement with TFRs defined using any Sloan Digital Sky Survey-filter absolute magnitude, stellar mass, or baryonic mass as the L proxy. We next utilize disk scale length ( R {sub d}) measurements to extend this investigation to the LVR relation. Here we find that our Galaxy lies farther from the relation than ∼90% of other spiral galaxies, yielding ∼9.5 σ evidence that it is unusually compact for its L and V {sub rot} (based on MW errors alone), a result that holds for all of the L proxies considered. The expected R {sub d} for the MW from the LVR relation is ∼5 kpc, nearly twice as large as the observed value, with error estimates placing the two in tension at the ∼1.4 σ level. The compact scale length of the Galactic disk could be related to other ways in which the MW has been found to be anomalous.

79 ASTRONOMY AND ASTROPHYSICS↗

Properties of Turbulence in the Reconnection Exhaust: Numerical Simulations Compared with Observations

The properties of the turbulence that develops in the outflows of magnetic reconnection have been investigated using self-consistent plasma simulations, in three dimensions. As commonly observed in space plasmas, magnetic reconnection is characterized by the presence of turbulence. In this study, we provide a direct comparison of our simulations with reported observations of reconnection events in the magnetotail, investigating the properties of the electromagnetic field and the energy conversion mechanisms. In particular, simulations show the development of a turbulent cascade consistent with spacecraft observations, statistics of the dissipation mechanisms in the turbulent outflows similar to the ones observed in reconnection jets in the magnetotail, and that the properties of turbulence vary as a function of the distance from the reconnecting X-line.

79 ASTRONOMY AND ASTROPHYSICS↗