Search NASA⌕ Search

SEARCH · Search NASA

Results for “Component sizing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Study of an unrefined humate solution as a possible remediation method for groundwater contamination - 15698

Savannah River Site (SRS) was one of the major nuclear processing facilities in the U.S. where plutonium was produced during the Cold War. Approximately 1.8 billion gallons of low level acidic waste solution containing radionuclides and dissolved metals were discharged to a series of unlined seepage basins at the F/H Area. Uranium is a key contaminant of concern in the basin's groundwater. It is migrating into the groundwater creating an acidic plume with a pH between 3-5.5. Groundwater Actions: The pump-and-treat water treatment unit was designed and built in 1997 to remove metals and radionuclides. In 2004 a hybrid funnel-and-gate system was constructed to create a treatment zone in which the acidic nature of the contaminated sediments could be reversed. Huma-K is an organic fertilizer that comes from the alkaline extraction of leonardite (a low-rank coal). Huma-K has a high content of humic substances which consist of complex organic compounds formed by the decomposition of plant and animal tissue. The objective of this study is to determine if a low cost unrefined humate solution (Huma-K) can be used to facilitate uranium adsorption to control its mobility in acidic groundwater. This study can assist in evaluating whether Huma-K can be used as an in situ amendment for the remediation of groundwater contaminated with uranium. Sediments from FAW-1 70-90 ft were used in this experiment. Sediments were disaggregated and sieved to a particle size of . 2 mm. Concentrations in the range 10-500 ppm were tested. Once all the components were added, pH was adjusted to 4. Samples were vortex mixed and placed on a shaker table at 100 RPM for a period of 24 hours in order to reach the adsorption equilibrium. Once the adsorption equilibrate was reached, samples were centrifuged at 2700 RPM to separate the liquid and the solid phase. The liquid fraction was analyzed using a Thermo Scientific Genesys 10S UV-Vis spectrophotometer. The same experimental design was used as explained above. A known concentration of Huma-K was used to study the pH effect on the sorption process. pH values were measured at the beginning and at the end of the experiment. Spectra of Huma-K show a featureless character. Absorbance of light increases as the wavelength is decreased. Measurements were done at 254 nm due to the presence of aromatic rings. Apparently there are two sorption processes. The first one follows the same trend as the Langmuir isotherm up to 250 ppm. The second sorption process occurs after all the binding sites in the sediments have been occupied. Precipitation decreases as the pH is increased. Based on the sorption isotherm, humic substances apparently bind first to the binding sites of the sediments particles. Once all the binding sites have been occupied, other sorption processes may start to dominate. Sorption is affected by pH. Higher sorption is seen at low pH values. Increased precipitation at low pH values is probably due to the neutralization of surface charges of humic molecules making them agglomerate.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Compositional Control on Shale Pore Structure Characteristics across a Maturation Gradient: Insights from the Devonian New Albany Shale and Marcellus Shale in the Eastern United States

The pore structure characteristics of shales are controlled by their mineralogical and organic matter (OM) composition. However, the contributions by different components in shales at varying thermal maturities remain poorly understood. In this study, Devonian New Albany Shale and Marcellus Shale samples spanning a thermal maturity from marginally mature (vitrinite reflectance R o 0.55%) to post-mature (R o 2.41 %) were selected to study the control of composition on the pore structure properties of shales at different stages of thermal maturation. Scanning electron microscope (SEM) imaging was used to examine pore types in shales, and low-pressure N 2 and CO 2 adsorption analyses were used to quantitatively characterize the mesopore and micropore characteristics of bulk shales and major components in shales. The results show that matrix-associated pores including interparticle pores between silt-sized mineral grains, phyllosilicate framework pores, and intraparticle pores within mineral grains exist in all samples but become less common with increasing maturity, which is likely caused by elevated compaction, cementation, and occlusion with bitumen. Secondary organic pores were not observed under SEM at marginal maturity but were detected in the condensate–wet gas and dry gas windows, with more organic pores in the dry gas window. At marginal maturity, OM has large amounts of mesopores and micropores as demonstrated by low-pressure N 2 and CO 2 adsorption analyses of OM isolated from shales, even though no OM-hosted pores were observed under SEM. With increasing thermal maturity, the mesopore and micropore specific surface area of OM increase and make greater contributions to the pore structure properties of bulk shales. The mesopore and micropore properties of shales are controlled by OM content and maturity as well as by clay mineral type and content, and they can be estimated from the contribution of each component at different stages of thermal maturation. In conclusion, accurate evaluation of the pore volume and SSA of shales will have important implications for assessing gas adsorption and transport in shales.

03 NATURAL GAS↗

Fabrication, microstructure, and wear performance of WC-Fe composite/metal coating fabricated by resistance seam welding

Highlights: • WC-Fe/metal coating consisted of WC-Fe layer and metal interlayer was fabricated by resistance seam welding. • The microstructure, hardness and wear performance of coatings with different WC particles size were analyzed. • The wear mechanism of coatings showed huge difference following various sliding distance. - Abstract: WC-Fe composite/metal coatings consisting of a WC-Fe composite layer and a metal interlayer were successfully fabricated on an Al 6061 substrate by resistance seam welding. The microstructures and phase compositions of the WC-Fe composite/metal coatings with different WC particle sizes (nano, fine, and coarse) were investigated. The WC-Fe composite layer consisted of WC particles and a Fe-C-Si super hard alloy (SHA) component, whereas the metal interlayer was composed of SHA, FeAl{sub 3}, Fe{sub 2}Al{sub 5}, and Al 6061. The surface microhardness of the WC-Fe composite/metal coating increased with increasing WC particle size. The wear performance of the coatings tested with different sliding distances is discussed in detail. Coating-C (coarse) showed the best wear resistance. The wear rates of both coating-N (nano) and coating-C decreased as the sliding distance increased, while coating-F (fine) demonstrated the opposite behavior. The wear mechanisms of the coatings were drastically different owing to the significantly different WC particle behavior at various sliding distances.

36 MATERIALS SCIENCE↗

VARIABLE PARTIAL COVERING AND A RELATIVISTIC IRON LINE IN NGC 1365

We present a complete analysis of the hard X-ray (2-10 keV) properties of the Seyfert galaxy NGC 1365, based on a 60 ks XMM-Newton observation performed in 2004 January. The two main results are as follows. (1) We detect an obscuring cloud with N{sub H} {approx} 3.5 x 10{sup 23} cm{sup -2} crossing the line of sight in {approx}25 ks. This implies a dimension of the X-ray source not larger than a few 10{sup 13} cm and a distance of the obscuring cloud of the order of 10{sup 16} cm. Adopting the black hole mass M {sub BH} estimated from the M {sub BH}-velocity dispersion relation, the source size is D {sub S} < 20R{sub G} and the distance and density of the obscuring clouds are R {approx} 3000-10, 000R{sub G} and n {approx} 10{sup 10} cm{sup -3}, i.e., typical values for broad-line region clouds. (2) An iron emission line with a relativistic profile is detected with high statistical significance. A time-integrated fit of the line+continuum reflection components suggests a high iron abundance (approximately three times solar) and an origin of these components in the inner part (within {approx}10R{sub G} ) of the accretion disk, in agreement with the small source size inferred from the analysis of the absorption variability.

99 GENERAL AND MISCELLANEOUS↗

Size Effect in the Phase Separation of Cr–W Solid Solutions

Size effects in phase transformations of nanoscale systems show up as significant changes in their phase diagram. Here, using a thermodynamic approach we demonstrate how the immiscibility region of Cr–W solid solutions is influenced by their particle size. For 40- and 70-nm-diameter particles, we consider two thermodynamically stable states with a core–shell configuration, differing in the composition of the core phase. It is shown that, in the nanometer range, one of these states becomes metastable and that the phase diagrams of the stable and metastable states differ significantly. Reducing the particle size leads to a decrease in the upper critical dissolution temperature (UCDP) by 300–400 K and marked changes in the mutual solubility of the components at temperatures comparable to the UCDP.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Locally coupled open subsystems: A formalism for affordable electronic structure calculations featuring fractional charges and size consistency

This manuscript introduces a methodology (within the Born-Oppenheimer picture) to compute electronic ground-state properties of molecules and solids/surfaces with fractionally occupied components. Given a user-defined division of the molecule into subsystems, our theory uses an auxiliary global Hamiltonian that is defined as the sum of subsystem Hamiltonians, plus the spatial integral of a second-quantized local operator that allows the electrons to be transferred between subsystems. This electron transfer operator depends on a local potential that can be determined using density functional approximations and/or other techniques such as machine learning. The present framework employs superpositions of tensor-product wave functions, which can satisfy size consistency and avoid spurious fractional charges at large bond distances. The electronic population of each subsystem is in general a positive real number and is obtained from wave-function amplitudes, which are calculated by means of ground-state matrix diagonalization (or matrix propagation in the time-dependent case). Furthermore, our method can provide pathways to explore charge-transfer effects in environments where dividing the molecule into subsystems is convenient and to develop computationally affordable electronic structure algorithms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Innovative laser-based methods for monitoring fuel retention in ITER

This paper addresses the challenge of tritium inventory management in ITER and future fusion reactors, highlighting the importance of accurate tritium measurement and its spatial distribution within the vacuum vessel. Given ITER’s operational constraints, especially the limit on tritium retention, precise measurement is essential for both safety and regulatory compliance. To tackle these questions, the paper presents the T-monitor diagnostic system developed by Forschungszentrum Jülich, which uses Laser-Induced Desorption (LID) in combination with Diagnostic Residual Gas Analysis (DRGA) to measure hydrogen isotope concentrations on the surface of divertor tiles. The system integrates a high-power laser, advanced optical components, and a Fast Scanning Mirror Unit (FSMU) for accurate laser spot positioning with rapid response. Designed to measure in situ tritium retention, the diagnostic provides high-resolution spatial mapping, vital for evaluating detritiation strategies. The laser heating process increases the divertor surface temperature to 1600 K within the laser spot, promoting hydrogen isotope desorption. Accurate measurements require the precise control of laser parameters, including pulse duration and spot size, with a target relative accuracy of 20%. The optical design includes both in-vessel and ex-vessel components, such as durable high-reflectivity mirrors made of gold and copper, selected not only for their infrared performance but also for their transmission of visible wavelengths for observation purposes. To protect optical components from contamination, a pneumatic shutter is used.

Hydrogen isotopes↗

Application of an Erosion Wear Model to Predict Wear of Hammer Milling Components

A workable analytical erosion model that relates critical hammermill process parameters (hammermill geometry and rotational speed) to critical material attributes of inorganic mineral species in feedstock (density, size, and aspect ratio) and substrate (hardness, toughness, and fatigue ductility) was applied to model wear (more specifically, change in the shape of hammers) in hammer milling operations. Results of the model were compared to experimental observations of the shape of hammers used in the INL Stage 1 Vermeer hammermill. Results showed good agreement between predicted and measured shape of the hammer, and that a quality-by-design (QbD) approach can be developed to predict component reliability based on scientific engineering principles in lieu of trial-and-error approaches.

36 MATERIALS SCIENCE↗

Dark energy from dark radiation in strongly coupled cosmologies with no fine tuning

A dual component made of non-relativistic particles and a scalar field, exchanging energy, naturally falls onto an attractor solution, making them a (sub)dominant part of the cosmic energy during the radiation dominated era, provided that the constant β, measuring the coupling, is strong enough. The density parameters of both components are then constant, as they expand as a{sup −4}. If the field energy is then prevalently kinetic, as is expected, its energy is exactly half of the pressureless component; the dual component as a whole, then, has a density parameter Ω{sub cd} = 3/4β{sup 2} (e.g., for β ≅ 2.5, Ω{sub cd} ≅ 0.1, in accordance with Dark Radiation expectations). The stationary evolution can only be broken by the rising of other component(s), expanding as a{sup −3}. In a realistic scenario, this happens when z ∼ 3–5 × 10{sup 3}. When such extra component(s) become(s) dominant, the densities of the dual components also rise above radiation. The scalar field behavior can be easily tuned to fit Dark Energy data, while the coupled DM density parameter becomes O(10{sup −3}). This model however requires that, at present, two different DM components exist. The one responsible for the break of the stationary regime could be made, e.g., by thermally distributed particles with mass even >> 1–2 keV (or non-thermal particles with analogous average speed) so accounting for the size of observed galactic cores; in fact, a fair amount of small scale objects is however produced by fluctuation re-generated by the coupled DM component, in spite of its small density parameter, after the warm component has become non-relativistic.

79 ASTRONOMY AND ASTROPHYSICS↗

Analysis of a nuclear hybrid energy system using absorption chillers and stratified chilled-water storage with an mPower reactor - 187

The intermittency of renewable energy technology, such as wind and solar power, puts strain on electric grids, often forcing carbon-based and nuclear sources of energy to operate in a load follow mode. Operating nuclear reactors in a load-follow fashion is undesirable due to the associated thermal and mechanical stresses placed on the fuel and reactor components. Various methods of Thermal Energy Storage (TES) can be coupled to nuclear (or renewable) power sources to help absorb grid instabilities caused by daily load demand changes and renewable intermittency. This is known as a Nuclear Hybrid Energy System (NHES). Previous research has found that a stratified chilled-water storage tank can help displace peak cooling loads to off-peak hours. In this study, a dynamic single effect, lithium bromide absorption chiller model was developed as a callable FORTRAN subroutine. Cooling towers, a stratified chilled-water storage tank, and cooling loads characteristic of a large campus were included to form a comprehensive TES model. This TES model was coupled to a high-fidelity mPower sized Small Modular Reactor (SMR) FORTRAN code that provides the transient behavior of primary and secondary-side components. Control algorithms based on excess capacity and conditions in the stratified chilled-water storage tank were used to determine when to divert low-pressure steam from the turbines to the absorption chillers in order to keep reactor power near steady-state. Simulation results depict how the TES system and SMR interact, and demonstrate that stratified chilled-water storage is a viable TES technology for an SMR in a NHES. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Plant functional trait change across a warming tundra biome

Trait-based ecology promises to predict community assembly1–3, ecosystem function4–6, and responses to environmental change4,7 across spatial and temporal scales. At the global scale the majority of plant trait variation is explained by just two dimensions8, corresponding to resource acquisition9 and plant size10,11. However, it is unknown whether (1) globally established trait relationships are maintained across biomes, (2) species level relationships could be invalidated by trait variation within species, and (3) trait variation is independent of scale. We tested these questions at the cold extremes of life on earth using the largest tundra plant trait database ever compiled. Here we show we found that tundra plants exhibited a two-axis spectrum consistent with global findings, and demonstrated remarkable consistency in the range of resource acquisition traits, but not size traits, compared to global trait distributions. The majority of trait variation occurred at the species level, but within-species variation comprised an important component of variation at local scales (<10 km2) and at low species richness (<10 species), implying that.... Our findings indicate that the dimensions of functional trait space are maintained in the coldest ecosystems on the planet despite strong environmental filtering of plant size, but that a greater focus on within-species trait variation is required to predict trait change at the community scale.

Bjorkman, Anne D.↗

Influence of Ions on the Size Dependent Morphology of Aerosol Particles

The study of aerosol particles composed of mixtures of organic and inorganic compounds provides insights for understanding chemistry in the atmosphere as well as information about phase transitions of systems under confinement. In the submicron size regime, we have previously found that liquid-liquid phase separation can be inhibited at sufficiently small particle diameters leading to phase separated particles at larger sizes and homogeneous particles below a threshold diameter. In this paper, we have investigated the influence of cations and anions in the inorganic compound (NH 4 + , Na + , SO 4 2- , HSO 4 - , and Cl-) on the phase separation of submicron aerosol particles. Each of five salts were studied with two different organic compounds. Surprisingly, a strong dependence on the identity of the cation is evident in the size dependence of the particle morphology and no dependence on the anion was found. Sodium containing samples exhibit phase separation in particles below 20 nm in diameter whereas ammonium containing samples cease to undergo phase separation in particles between 45 and 65 nm in diameter. The separation relative humidity for supermicron droplets also depends on the identity of the cation in the inorganic component if the anion is the same across the salts compared. In addition, the correlation between the separation relative humidity and size dependence was investigated and displays a trend, but is not a dominant feature of the data. We explain the results in terms of hard and soft ions, where the harder cation (Na + ) leads to phase separation down to smaller sizes while the softer cation (NH 4 + ) prevents phase separation and causes particles up to a larger diameter to remain homogenous. This study has implications for atmospheric chemistry in regions dominated by sea spray aerosol, which contains sodium as the primary cation, when compared to continental aerosol, where ammonium is an abundant cation. Additionally, these findings can be used to understand the influence of cations on the phase transitions of confined materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of alloying elements on the formation of < c >-component loops in Zr alloy Excel under heavy ion irradiation.

We report here the microstructural changes occurring in the zirconium alloy Excel (Zr-3.5 wt% Sn-0.8Nb-0.8Mo-0.2Fe) during heavy ion irradiation. In situ irradiation experiments were conducted at reactor operating temperatures on two Zr Excel alloy microstructures with different states of alloying elements, with the states achieved by different solution heat treatments. In the first case, the alloying elements were mostly concentrated in the beta (beta) phase, whereas, in the second case, large Zr-3(Mo,Nb,Fe)(4) secondary phase precipitates (SPPs) were grown in the alpha (alpha) phase by long term aging. The heavy ion induced damage and resultant compositional changes were examined using transmission electron microscopy (TEM) in combination with scanning transmission electron microscope (STEM)-energy dispersive x-ray spectroscopy (EDS) mapping. Significant differences were seen in microstructural evolution between the two different microstructures that were irradiated under similar conditions. Nucleation and growth of < c >-component loops and their dependence on the alloying elements are a major focus of the current investigation. It was observed that the < c >-component loops nucleate readily at 100, 300, and 400 degrees C after a threshold incubation dose (TID), which varies with irradiation temperature and the state of alloying elements. It was found that the TID for the formation of < c >-component loops increases with decrease in irradiation temperature. Alloying elements that are present in the form of SPPs increase the TID compared to when they are in the beta phase solid solution. Dose and temperature dependence of loop size and density are presented. Radiation induced redistribution and clustering of alloying elements (Sn, Mo, and Fe) have been observed and related to the formation of < c >-component loops. It has been shown that at the higher temperature tests, irradiation induced dissolution of precipitates occurs whereas irradiation induced amorphization occurs at 100 degrees C. Furthermore, dose and temperature seem to be the main factors governing the dissolution of SPPs and redistribution of alloying elements, which in turn controls the nucleation and growth of < c >-component loops. The correlation between the microstructural evolution and microchemistry has been found by EDS and is discussed in detail.

Idrees, Yasir↗

Development of a Thermal Spray, Redox Stable, Ceramic Anode for Metal Supported SOFC

In this program, GE global research and GE fuel cells in Malta conducted thermal spray optimization experiments, initially focusing on a well-established ceramic anode formulation, lanthanum strontium titanate combined with gadolinium doped ceria. Powder engineering work was conducted both internally and with vendors to develop repeatable, stable, and flowable thermal spray feedstocks. Agglomerate sintering was conducted in the last phase of the project, building on earlier program work, and was used to increase run stability during the longer scaled up runs for the 410 cm 2 cells. Further powder engineering would be needed to fully design a powder ready for full scale manufacturing. During preliminary work on the LST-GDC electrodes, GE demonstrated 100 cm 2 stacks enduring multiple redox cycles with limited impact. Another key finding on the project was the identification of process conditions for two component ceramic anode thermal spray without the formation of phase impurities which were present in all early work on the program. GE global research and West Virginia University screened a large number of ceramic anode formulations, focused on identifying materials with ideal materials properties for use in SOFC anodes. In addition, synthetic scaling research was conducted to increase powder synthesis batch size several orders of magnitude during the course of project work. West Virginia University was able to show button cells using two component ceramic anodes which produced > 890 mW/cm 2 and even a single component SOFC button demonstrating > 1 W/cm 2 performance. These button cell tests show the great potential of these redox stable materials. Down-selected ceramic anode formulations were combined with the optimized thermal spray process methods to first demonstrate multiple groups of 100 cm 2 SOFC stacks able to achieve the power density goals for the project. GE research also quickly investigated the performance of a subset of these formulations on long term degradation tests and assessed their performance on simulated natural gas reformate. In the final phase of the program, scaling activities were employed to translate from the 100cm2 process up to 410 cm 2 . Two large format 10-cell stack tests were completed, and one of these stacks produced 0.987 kW which is one of the highest power demonstrations of ceramic anode, metal support, SOFC technology known to GE. These ceramic anode stacks had been produced with all other materials in the stack held constant, demonstrating the flexibility of the thermal spray process in scaling to very large electrode size.

30 DIRECT ENERGY CONVERSION↗

On the size and mass of photoionized clouds in extended spiral galaxy halos

The size and mass of two circumgalactic medium (CGM) clouds in the halo (impact parameter = 65 kpc) of a nearby late-type galaxy, MGC-01-04-005 (cz=1865 km s{sup −1}), are investigated using a close triplet of QSO sight lines (the “LBQS Triplet”). Far ultraviolet spectra obtained with the Cosmic Origins Spectrograph on board the Hubble Space Telescope find two velocity components in Lyα at ∼1830 and 1900 km s{sup −1} in two of these sight lines, requiring minimum transverse cloud sizes of ⩾10 kpc. A plausible, but not conclusive, detection of C iv 1548 Å absorption at the higher velocity in the third sight line suggests an even larger lower limit of ⩾23 kpc for that cloud. Using various combinations of constraints, including photoionization modeling for one absorber, lower limits on masses of these two clouds of ≳10{sup 6}M{sub ⊙} are obtained. Ground-based imaging and long-slit spectroscopy of MCG-01-04-005 obtained at the Apache Point Observatory 3.5 m telescope find it to be a relatively normal late-type galaxy with a current star formation rate (SFR) of ∼0.01M{sub ⊙} yr{sup −1}. GALEX photometry finds an SFR only a few times higher over the last 10{sup 8} years. We conclude that the CGM clouds probed by these spectra are typical because they are at impact parameters of 0.4–0.5 R{sub vir} from a rather typical, non-starbursting late-type galaxy; thus, these size and mass results should be generic for this class. Therefore, at least some CGM clouds are exceptionally large and massive.

79 ASTRONOMY AND ASTROPHYSICS↗

SU-G-IeP1-12: Size Selective Arterial Cerebral Blood Volume Mapping Using Multiple Inversion Time Arterial Spin Labeling

Purpose: To demonstrate the feasibility of a novel method for size specific arterial cerebral blood volume (aCBV) mapping using pseudo-continuous arterial spin labeling (PCASL), with multiple TI. Methods: Multiple PCASL images were obtained from a subject with TI of [300, 400, 500, 600, 700, 800, 900, 1000, 1500, 2000, 2500, 3000, 3500, 4000] ms. Each TI pair was averaged six times. Two scans were performed: one without a flow crusher gradient and the other with a crusher gradient (10cm/s in three directions) to remove signals from large arteries. Scan times were 5min. without a crusher gradient and 5.5 min with a crusher gradient. Non-linear fitting algorithm finds the minimum mean squared solution of per-voxel based aCBV, cerebral blood flow, and arterial transit time, and fits the data into a hemodynamic model that represents superposition of blood volume and flow components within a single voxel. Results: aCBV maps with a crusher gradient represent signals from medium and small sized arteries, while those without a crusher gradient represent signals from all sized arteries, indicating that flow crusher gradients can be effectively employed to achieve size-specific aCBV mapping. Regardless of flow crusher, the CBF and ATT maps are very similar in appearance. Conclusion: Quantitative size selective blood volume mapping controlled by a flow crusher is feasible without additional information because the ASL quantification process doesn’t require an arterial input function measured from a large artery. The size specific blood volume mapping is not interfered by sSignals from large arteries do not interfere with size specific aCBV mapping in the applications of interest in for applications in which only medium or small arteries are of interest.

60 APPLIED LIFE SCIENCES↗

Scalable Proximity-Based Methods for Large-Scale Analysis of Atom Probe Data

Powered by recent advances in data acquisition technologies, today's state-of-the-art atom probe microscopes yield data sets with sizes ranging from a few million atoms to billions of atoms. Analysis of these atomic data sets within rea-sonable turnaround times is a pressing data analysis challenge for material scientists currently equipped with software systems that do not scale to these massive data sets. Here, we present the shared memory component of a larger ongoing effort to develop a multi-feature data analysis framework capable of analyzing atom probe data of all sizes and scales from desktop multicore machines to large-scale high-performance computing platforms with hybrid (shared and distributed memory) architectures. Our focus here is on a broad class of popular atom probe data analysis methods that rely on core time-consuming k-NN queries. We present a scalable, heuristic algorithm for k-NN queries using three-dimensional range trees. To demonstrate its efficacy, the k-NN algorithm is integrated with two use cases of atom probe data analysis methods and the resulting analysis times are shown to speedup by over 20X on a 32-core Cray XC40 node using workloads up to 8 million atoms, which is already beyond the at-scale capabilities of existing atom probe software. Using this k-NN algorithm, we also introduce a novel parameter estimation method for a class of cluster finding methods, called friends-of-friends (FoF) methods, to completely bypass their expensive pre-processing steps. In each case, we validate the results on a variety of control data sets.

Lu, Hao↗

High capacity Li-ion battery anodes: Impact of crystallite size, surface chemistry and PEG-coating

Battery electrodes are complex mesoscale systems comprised of an active material, conductive agent, current collector, and polymeric binder. Previous work showed that introduction of poly [3-(potassium-4-butanoate) thiophene] (PPBT) as a binder component coupled with a polyethylene glycol (PEG) surface coating on magnetite (Fe 3 O 4 ) nanoparticles enhanced electron and ion transport in the high capacity anode system. Here, the impact of Fe 3 O 4 crystallite size (10 nm vs. 20 nm) and surface chemistry were explored to evaluate their effects on interfacial interactions within the composite PEG/PPBT based electrodes and resultant battery performance. The Fe 3 O 4 synthesis methods inevitably lead to differences in surface chemistry. For instance, the Fe 3 O 4 particles synthesized using ammonium hydroxide appeared more dispersed, and afforded improved rate capability performance. Notably, chemical interactions between the active nanoparticles and PPBT binder were only seen with particles synthesized using triethylamine. Capacity retention and cycling performance were unaffected. Thus, this study provides fundamental insights into the significant impact of active material synthesis on the design and fabrication of composite battery electrodes.

25 ENERGY STORAGE↗