Search NASA⌕ Search

SEARCH · Search NASA

Results for “Data fitting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

OzDES Reverberation Mapping of Active Galactic Nuclei: Final Data Release, Black-Hole Mass Results, & Scaling Relations

Over the last decade, the Australian Dark Energy (OzDES) collaboration has used Reverberation Mapping to measure the masses of high redshift supermassive black holes. Here we present the final review and analysis of this OzDES reverberation mapping campaign. These observations use 6-7 years of photometric and spectroscopic observations of 735 Active Galactic Nuclei (AGN) in the redshift range 0.13-3.85 and bolometric luminosity range 44.3 - 47.5 erg/s. Both photometry and spectra are observed in visible wavelengths, allowing for the physical scale of the AGN broad line region to be estimated from reverberations of the H{̱e̱ṯa̱}̱, MgII and CIV emission lines. We successfully use reverberation mapping to constrain the masses of 62 super-massive black holes, and combine with existing data to fit a power law to the lag-luminosity relation for the H{̱e̱ṯa̱}̱ and MgII lines with a scatter of ~0.25 dex, the tightest yet identified, fit specifically for consistency with high redshift AGN. We fit a similarly constrained relation for CIV, resolving a tension with the low luminosity literature AGN by accounting for selection effects arising from finite survey length. We also examine the impact of emission line width and luminosity (related to accretion rate) in reducing the scatter of these scaling relationships and find no significant improvement over the lag-only approach for any of the three lines. Using these relations, we further estimate the masses and accretion rates of 246 AGN with single epoch methods. We also use these relations to estimate the relative sizes of the H{̱e̱ṯa̱}̱, MgII and CIV emitting regions. In short, we provide a comprehensive benchmark of high redshift AGN reverberation mapping at the close of this most recent generation of surveys, including light curves, time-delays, and a set of significantly improved radius-luminosity relations for use with high-redshift populations.

McDougall, Hugh [Queensland U.]↗

Benchmarking magnetised three-wave coupling for laser backscattering: analytic solutions and kinetic simulations

Understanding magnetised laser–plasma interactions is important for controlling magneto-inertial fusion experiments and developing magnetically assisted radiation and particle sources. For nanosecond pulses at non-relativistic intensities, interactions are dominated by coherent three-wave interactions, whose nonlinear coupling coefficients became known only recently when waves propagate at oblique angles with the magnetic field. In this paper, backscattering coupling coefficients predicted by warm-fluid theory are benchmarked using particle-in-cell simulations in one spatial dimension, and excellent agreements are found for a wide range of plasma temperatures, magnetic field strengths and laser propagation angles, when the interactions are mediated by electron-dominant hybrid waves. Systematic comparisons between theory and simulations are made possible by a rigorous protocol. On the theory side, the initial boundary value problem of linearised three-wave equations is solved, and the transient-time solutions allow the effects of growth and damping to be distinguished. On the simulation side, parameters are carefully chosen and calibration runs are performed to ensure that comparisons are well controlled. Fitting simulation data to analytical solutions yields numerical growth rates that match theory predictions within error bars. Although warm-fluid theory is found to be valid for a wide parameter range, genuine kinetic effects have also been observed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Conductivity Spectroscopy for Investigation and Discovery of Photovoltaic Materials

Conductivity spectroscopy is an extremely powerful set of methods for probing the properties of optoelectronic materials, especially photovoltaics, where photoconductivity is one of the best spectroscopic proxies for performance. Despite this power, they are substantially less commonly used than time-resolved photoluminescence (for instance) because they tend to be more expensive to implement (THz) and/or require specialized knowledge (GHz) to construct instruments, which are not widely available. The goal of this review is to illustrate the utility of these experiments in the discovery and study of photovoltaic absorber materials and simultaneously make them more accessible to the community by providing a central tutorial resource. We provide a comprehensive review of how conductivity spectroscopy has developed over the past decade and been applied in the discovery and development of photovoltaic materials, with a primary focus on emerging solution-processable technologies. Along the way we aim to demystify conductivity spectroscopy with focused tutorial sections that explain the physical models used to fit the data and illustrate how to think about “high-frequency conductivity”.

14 SOLAR ENERGY↗

Non-Boltzmann Effects in Chain Branching and Pathway Branching for Diethyl Ether Oxidation

Low-temperature (LT) engine applications have several potential benefits, including reduced emissions and increased efficiency. Attaining these benefits requires accurate kinetic modeling of LT chain branching, which depends heavily on ketohydroperoxide (KHP) decomposition. For diethyl ether (DEE), a promising biofuel, current estimates of the KHP decomposition rate constant are largely based on empirical fits to data. In this study, we investigate the most important KHP isomer in DEE LT oxidation by applying variable reaction coordinate transition state theory to the main pathway for KHP decomposition: OO bond fission to produce •OH and a keto-alkoxy radical, •OQ'O. We also use ab initio kinetics methods to investigate the decomposition of •OQ'O, where we find dominant branching to acetic acid, with the remaining flux going to CH 3 C(O)OCHO. Additionally, new time-resolved measurements of DEE and acetic acid concentrations during LT (450–600 K) DEE oxidation are obtained in a laser photolysis flow reactor coupled with multiplexed photoionization mass spectrometry. These new experimental data, along with jet-stirred reactor data in the literature, are compared with the predictions of a recent DEE mechanism (Tran et al. Proc. Comb. Inst. 2019, 37, 511-519) that was modified with the newly calculated ab initio rate constants for KHP and •OQ'O decomposition. The predictions of the modified mechanism are quite poor when compared to the experimental data; this is primarily due to the new KHP ⇌ •OQ'O + •OH rate constant, which is 1–2 orders of magnitude slower than empirical values employed in recent mechanisms. To reconcile the new KHP rate constant and the experimental data, we explore and quantify the possible role of non-Boltzmann (nB) reaction sequences. The nB reactions have a substantial effect on both the overall mechanism reactivity and the •OQ'O branching to acetic acid. We also provide guidance on the proper implementation of nB reactions in kinetic mechanisms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

X-ray Scattering and Coarse-Grained Simulations for Clustering and Interactions of Monoclonal Antibodies at High Concentrations

Attractive protein-protein interactions (PPI) in concentrated monoclonal antibody (mAb) solutions may lead to reversible oligomers (clusters) that impact colloidal stability and viscosity. Herein, the PPI are tuned for two mAbs via the addition of arginine (Arg), NaCl, or ZnSO 4 as characterized by the structure factor ( S eff (q)) with small angle x-ray scattering (SAXS). The SAXS data are fit with molecular dynamics simulations by placing a physically relevant short-ranged attractive interaction on selected beads in coarse-grained 12 bead models of the mAb shape. The optimized 12-bead models are then used to differentiate key microstructural properties, including center of mass radial distribution functions ( g COM (r)), coordination numbers and cluster size distributions (CSD). The addition of co-solutes results in more attractive Seff(q) relative to the no co-solute control for all systems tested, with the most attractive systems showing an upturn at low q . Only the All1 model with an attractive site in each Fab and Fc region (possessing Fab-Fab, Fab-Fc and Fc-Fc interactions) can reproduce this upturn, and the corresponding CSDs show the presence of larger clusters compared to the control. In general, for models with similar net attractions, i.e., second osmotic virial coefficients, the size of the clusters increases as the attraction is concentrated on a smaller number of evenly distributed beads. Here, the cluster size distributions from simulations are used to improve the understanding and prediction of experimental viscosities. The ability to discriminate between models with bead interactions at particular Fab and Fc bead sites from SAXS simulations, and to provide real space properties (CSD and g COM (r)), will be of interest in engineering protein sequence and formulating protein solutions for weak PPI to minimize aggregation and viscosities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reaction Kinetics of Water Molecules with Oxygen Vacancies on Rutile TiO 2 (110)

The formation of bridging hydroxyls (OHb) via reactions of water molecules with oxygen vacancies (VO) on reduced TiO 2 (110) surfaces is studied using infrared reflection-absorption spectroscopy (IRAS), electron-stimulated desorption (ESD), and photon-stimulated desorption (PSD). Narrow IRAS peaks at 2737 cm-1 and 3711 cm -1 are observed for stretching vibrations of OD b and OH b on TiO 2 (110), respectively. IRAS measurements with s- and p-polarized light demonstrate that the bridging hydroxyls are oriented normal to the (110) surface. The IR peaks disappear after the sample is exposed to O 2 or annealed in the temperature range of 400 – 600 K (correlating with the temperature at which pairs of OHb’s reform water and then desorb), which is consistent with their identification as bridging hydroxyls. We have studied the kinetics of water reacting with the vacancies by monitoring the formation of bridging hydroxyls (using IRAS) as a function of the annealing temperature for a small amount of water initially dosed on the TiO 2 (110) at low temperature. Separate experiments have also monitored the loss of water molecules (using water ESD) and vacancies (using the CO photooxidation reaction) due to the reactions of water molecules with the vacancies. All three techniques show that the reaction rate becomes appreciable for T > 150 K and that the reactions largely complete for T > 250 K. The temperature-dependent water-VO reaction kinetics are consistent with a Gaussian distribution of activation energies with E a = 0.545 eV, ΔE a (FWHM) = 0.125 eV, and a “normal” prefactor, v = 10 12 s -1 . In contrast, a single activation energy with a physically reasonable prefactor does not fit the data well. Our experimental activation energy is close to theoretical estimates for the diffusion of water molecules along the Ti 5c rows on the reduced TiO 2 (110) surface, which suggests that the diffusion of water controls the water – V O reaction rate.

74 ATOMIC AND MOLECULAR PHYSICS↗

Determining the Reaction Kinetics and Thermodynamics of a Diels–Alder Network Using Dynamic Gel Criteria

We undertook a detailed rheological investigation to evaluate the kinetic parameters of the forward and reverse Diels–Alder (DA) reactions of a model network cross-linked using a furan prepolymer and a common aromatic bismaleimide. At high temperature where the Winter–Chambon’s criterion of frequency-independence was more applicable, a multiwave technique permitted van’t Hoff analysis and calculation of the reaction thermodynamic parameters, specifically the enthalpy and entropy of the reaction: ΔH° = –38.3 ± 5.2 kJ mol –1 and ΔS° = –94.3 ± 13.4 J mol –1 . At mild temperatures where the G'–G" crossover point is experimentally convenient to measure gelation, isothermal tests were used to obtain reasonable fDA kinetic parameters from Eyring analysis such as the apparent activation enthalpy and entropy of ΔH$^{‡}_{fDA}$ = 76.8 ± 6.9 kJ mol –1 and ΔS$^{‡}_{fDA}$= –82.8 ± 22.2 J mol –1 K –1 . Comparable rheokinetic methods include cross-linking density measurements and stress relaxation tests to calculate effective kinetics, whereas the critical gel conversion was consistently applied here. As a result, rate data are fitted with the Arrhenius equation for comparison purposes and the Eyring equation to demonstrate its broader utility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bottom-Up Simulation, Reconstruction, and Quantification of Macromolecule Sequences from Experimental Polymerizations

Motivated by the canonical sequence–structure–function paradigm, tools to characterize chemical patterning in natural biomacromolecules, from proteins to nucleic acids, have grown exponentially in recent years. However, analogous strategies for synthetic macromolecules remain in nascent stages, complicated by sequence polydispersity and analytical limitations. To address this, we have developed a comprehensive and open-source Python package, PRISM (polymer rate insights and sequence modeling), an end-to-end workflow that provides a path from experimental kinetics measurements to quantitative and qualitative metrics for describing chemical patterning in stochastic polymers. First, a numerical integration strategy was constructed to simulate and fit experimental data from reversible addition–fragmentation chain transfer (RAFT) polymerization kinetics, enabling the facile estimation of relevant reactivity ratios. These ratios were then used in a mechanism-specific stochastic kinetic simulation strategy to simulate sequence ensembles corresponding to model systems spanning experimental copolymers, classes of statistical polymers (e.g., alternating, block, and gradient), and multiblock copolymers. Lastly, inspired by sequence homology metrics from bioinformatics, we introduce visualization strategies and quantitative metrics to facilitate comparisons of different sequence ensembles. As the sequence–structure–function paradigm becomes increasingly central in de novo design of synthetic macromolecules, this toolkit provides a first step toward accurate and representative sequence description and featurization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantitative Measurements of the Temperature-Dependent Microscopic and Macroscopic Dynamics of a Molecular Dopant in a Conjugated Polymer

Understanding the nature of dopant dynamics in the solid state is critical for improving the longevity and stability of organic electronic devices and for optimizing the doping-induced solubility control (DISC) patterning method. Here in this work, we use quasi-elastic neutron scattering (QENS) and fluorescence quenching techniques to develop a comprehensive picture of both the microscopic and macroscopic dynamics of the soluble p-type molecular dopant tetrafluoromethyloxycarbonyltricyanoquinodimethane (F4MCTCNQ) in the conductive polymer poly(3-hexylthiophene-2,5-diyl) (P3HT). Specifically, fast dynamics (ps–ns) of the dopant, such as the methyl and the methoxycarbonyl group rotations, are observed in QENS experiments. From confocal fluorescence microscope experiments, longer-range/slower dopant diffusion (ms–days) is captured. However, in order to fit these data, it is necessary to incorporate a Langmuir isotherm equilibrium between the neutral and ionized dopant molecules. Ionized F4MCTCNQ is strongly favored by the equilibrium, but it diffuses 3 orders of magnitude slower than neutral species. Moreover, the macroscopic diffusion is found to depend mostly on the minority concentration of neutral dopant molecules in the film. In conclusion, the global diffusion coefficient of the monoester-substituted dopant F4MCTCNQ is shown to be more than an order of magnitude smaller than that of the widely used dopant F4TCNQ.

36 MATERIALS SCIENCE↗

Investigating Fast Scanning Calorimetry and Differential Scanning Calorimetry as Screening Tools for Thermoset Polymer Material Compatibility with Laser-Based Powder Bed Fusion

As additive manufacturing (AM) technology has developed and progressed, a constant topic of research in the area is expanding the library of materials to be used with these techniques. Among AM methods that utilize polymers, laser-based powder bed fusion (PBF-LB) has preferentially used thermoplastic polymers as its starting materials, but the deposition and material joining method employed in PBF-LB may also be compatible with powdered thermoset polymer precursors as feedstocks. To assess the compatibility of candidate thermosetting polymers and PBF-LB, characterization techniques and protocols that link fundamental material behavior to material behavior in the processing environment are needed. Therefore, the objectives of this work are to compare the curing behavior measured with two different calorimetry techniques that can operate in different heating rate regimes, differential scanning calorimetry (DSC) and fast scanning calorimetry (FSC), and to assess the capabilities of these techniques to act as materials screening tools for PBF-LB. A commercial polyester powder coating is used as a model material to evaluate the potential of obtaining complimentary information for material screening through a combination of calorimetry methods, and its non-isothermal curing behavior is measured at heating rates between 5 °C/min and 7500 °C/min. Curing exotherms are observed with both calorimetry techniques, and comparing the enthalpy associated with curing shows that incomplete curing occurs at higher heating rates, with relative conversion values of approximately 30%. The curing data are fit with two isoconversional models, Friedman and Starink, which show a reduced activation energy at higher heating rates as well, signifying a lower barrier to curing at the conditions used in the FSC experiments. Overall, the results of this work indicate that using these two calorimetry techniques as tiered screening tools can provide valuable information about how curing may proceed in PBF-LB and inform materials selection and design activities for additive manufacturing.

36 MATERIALS SCIENCE↗

Size-Dependent Adsorption and Adhesion Energetics of Ag Nanoparticles on Graphene Films on Ni(111) by Calorimetry

Interest in the use of carbon supports for late transition metal nanoparticle catalysts has expanded rapidly due to the increasing importance of electrocatalysts for clean energy and environmental technologies and the use and storage of renewable electricity. Compared to oxide supports, almost nothing is known about the effect of metal nanoparticle size on the energies of the metal atoms within carbon-supported nanoparticles, yet these energies are crucial for understanding their surface reactivity and sintering kinetics. Here, the growth morphology and adsorption energetics of vapor-deposited Ag onto clean graphene/Ni(111) surfaces have been studied using a combination of single-crystal adsorption calorimetry (SCAC) and He + low-energy ion scattering (LEIS). The differential heat of Ag adsorption is 207 kJ/mol for making ~30 atom Ag particles on graphene terraces at 100 K and 16 kJ/mol higher for making ~9 atom Ag clusters at defect sites at the same temperature. The heat of adsorption increases rapidly with Ag coverage as 3D Ag nanoparticles nucleate and grow in size, asymptotically reaching within 5 kJ/mol of the bulk Ag sublimation enthalpy (285 kJ/mol) by 2 ML. The heats of adsorption and Ag nanoparticle densities from LEIS (~10 16 /m 2 ) were combined to provide the Ag/graphene adhesion energy (E adh = 1.8 J/m 2 in the large-particle limit) and the Ag chemical potential (μ) versus effective particle diameter (D). The Ag chemical potential was well-fitted by μ(D) = (3γ v /M – E adh )(1 + (1.5 nm)/D)(2V m /D), where γ v /M is the surface energy of bulk Ag and V m is its molar volume. The same equation is known to fit similar data for late transition metals on clean surfaces of metal oxide single crystals. The adhesion energy of Ag measured here on graphene falls within the wide range measured for Ag on those oxide surfaces and is almost as large as on the oxide that binds Ag particles most strongly, namely CeO 2 (111), which is well-known to be very effective at resisting catalyst deactivation by metal sintering. Furthermore, these results imply that carbon supports will be effective at resisting sintering and that Ag particles smaller than 6 nm on graphene will bind small adsorbed reaction intermediates more weakly than supports with weaker adhesion to Ag, like MgO(100).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Kinetic Stability May Determine the Interaction Dynamics of the Bifunctional Protein DCoH1, the Dimerization Cofactor of the Transcription Factor HNF-1[alpha]

The two disparate functions of DCoH1 (dimerization cofactor of HNF-1)/PCD (pterin-4a-carbinolamine dehydratase) are associated with a change in oligomeric state. DCoH dimers enhance the activity of the diabetes-associated transcription factor HNF-1{alpha} (hepatocyte nuclear factor-1{alpha}), while the PCD activity of DCoH1 homotetramers aids in aromatic amino acid metabolism. These complexes compete for the same interface of the DCoH dimer. Formation of the DCoH1/HNF-1{alpha} complex requires cofolding. The homotetramer of the DCoH1 paralogue, DCoH2, interacts with HNF-1{alpha} through simple mixing. To further investigate regulation of DCoH/HNF-1{alpha} complex formation, we measured the stability of the DCoH1 homotetramer through unfolding studies by intrinsic tryptophan fluorescence. DCoH2 unfolding is reversible. Surprisingly, the DCoH1 homotetramer is resistant to guanidine unfolding but refolds at a much lower guanidine concentration. We show that a point mutation at the DCoH1 tetramer interface, Thr 51 Ser, overcomes the dissociation barrier of the homotetramer and increases the interaction with HNF-1{alpha}. The 1.8 {angstrom} resolution crystal structure of DCoH1 T51S shows the presence of an ordered water molecule at the tetramer interface, as in DCoH2, which may destabilize the homotetramer. The equilibrium unfolding data were fit to a two-state model with no apparent intermediate. Folding intermediates were detectable by size exclusion chromatography. For wild-type DCoH1 the intermediates changed with time, suggesting a kinetic origin for the unfolding barrier of the homotetramer. We propose an unfolding pathway in which the tetramer unfolds slowly, but the dimer folds reversibly. Implications for regulation of DCoH1/HNF-1{alpha} complex formation are discussed.

36 MATERIALS SCIENCE↗

3-D Transient Hydraulic Tomography in Unconfined Aquifers with Fast Drainage Response

We investigate, through numerical experiments, the viability of three-dimensional transient hydraulic tomography (3DTHT) for identifying the spatial distribution of groundwater flow parameters (primarily, hydraulic conductivity K) in permeable, unconfined aquifers. To invert the large amount of transient data collected from 3DTHT surveys, we utilize an iterative geostatistical inversion strategy in which outer iterations progressively increase the number of data points fitted and inner iterations solve the quasilinear geostatistical formulas of Kitanidis. In order to base our numerical experiments around realistic scenarios, we utilize pumping rates, geometries, and test lengths similar to those attainable during 3DTHT field campaigns performed at the Boise Hydrogeophysical Research Site (BHRS). We also utilize hydrologic parameters that are similar to those observed at the BHRS and in other unconsolidated, unconfined fluvial aquifers. In addition to estimating K, we test the ability of 3DTHT to estimate both average storage values (specific storage Ss and specific yield Sy) as well as spatial variability in storage coefficients. The effects of model conceptualization errors during unconfined 3DTHT are investigated including: (1) assuming constant storage coefficients during inversion and (2) assuming stationary geostatistical parameter variability. Overall, our findings indicate that estimation of K is slightly degraded if storage parameters must be jointly estimated, but that this effect is quite small compared with the degradation of estimates due to violation of ‘‘structural’’ geostatistical assumptions. Practically, we find for our scenarios that assuming constant storage values during inversion does not appear to have a significant effect on K estimates or uncertainty bounds.

Environmental Molecular Sciences Laboratory↗

Relative Permeability Scaling From Pore-Scale Flow Regimes

Relative permeability measurements are commonly fitted with the Corey and Brooks-Corey correlations. Despite such correlations fit experimental data generally well, they are mostly of an empirical nature. Here, we propose a semiempirical model to determine relative permeabilities of the wetting and the nonwetting phases in real 3-D porous media that accounts for pore-scale flow regimes. The starting point is the homogenization framework proposed by Picchi and Battiato (2018, https://doi.org/10.1029/2018WR023172), where the upscaling is conducted for different spatial distributions of the flowing phases in the capillary tube setting. First, we extend the approach to realistic media by allowing pore-scale flow regimes to coexist in a complex geometry while accounting for capillary and viscous limits in the dynamics. Then, we discuss the scaling behavior of normalized relative permeabilities in terms of the phases viscosity ratio and identify three classes which govern their scaling. We also derive an analytical expression for the fractional flow. Finally, we provide a detailed validation of the proposed model for both relative permeabilities and fractional flow against data from numerical simulations and experiments available in the literature. Lastly, the data set used for validation covers a wide range of systems, ranging from brine-CO 2 to oil-water flows. The equations derived capture well the trend of both numerical and experimental data.

54 ENVIRONMENTAL SCIENCES↗

An Efficient Bayesian Approach to Learning Droplet Collision Kernels: Proof of Concept Using “Cloudy,” a New n -Moment Bulk Microphysics Scheme

The small-scale microphysical processes governing the formation of precipitation particles cannot be resolved explicitly by cloud resolving and climate models. Instead, they are represented by microphysics schemes that are based on a combination of theoretical knowledge, statistical assumptions, and fitting to data (“tuning”). Historically, tuning was done in an ad hoc fashion, leading to parameter choices that are not explainable or repeatable. Recent work has treated it as an inverse problem that can be solved by Bayesian inference. The posterior distribution of the parameters given the data—the solution of Bayesian inference—is found through computationally expensive sampling methods, which require over $\mathcal{O}$(10 5 ) evaluations of the forward model; this is prohibitive for many models. We present a proof of concept of Bayesian learning applied to a new bulk microphysics scheme named “Cloudy,” using the recently developed Calibrate-Emulate-Sample (CES) algorithm. Cloudy models collision-coalescence and collisional breakup of cloud droplets with an adjustable number of prognostic moments and with easily modifiable assumptions for the cloud droplet mass distribution and the collision kernel. The CES algorithm uses machine learning tools to accelerate Bayesian inference by reducing the number of forward evaluations needed to $\mathcal{O}$(10 2 ). It also exhibits a smoothing effect when forward evaluations are polluted by noise. In a suite of perfect-model experiments, we show that CES enables computationally efficient Bayesian inference of parameters in Cloudy from noisy observations of moments of the droplet mass distribution. In an additional imperfect-model experiment, a collision kernel parameter is successfully learned from output generated by a Lagrangian particle-based microphysics model.

54 ENVIRONMENTAL SCIENCES↗

Thermoelastic Properties of Fe 3+ ‐Rich Jeffbenite and Application to Superdeep Diamond Barometry

Abstract Jeffbenite (Mg 3 Al 2 Si 3 O 12 ) is a tetragonal phase found in so far only in superdeep diamonds, and its thermoelastic parameters are a prerequisite for determining entrapment pressures as it is regarded as a potential indicator for superdeep diamonds. In this study, the thermoelastic properties of synthetic Fe 3+ ‐jeffbenite were measured up to 33.7 GPa and 750 K. High‐temperature static compression data were fitted, giving ( ∂K T 0 / ∂ T ) P = −0.0107 (4) GPa/K and α T = 3.50 (3) × 10 −5 K −1 . The thermoelastic properties and phase stability are applied to modeling isomekes, or P‐T paths intersecting possible conditions of entrapment in diamond. We calculate that under ideal exhumation, jeffbenite entrapped at mantle transition zone conditions will exhibit a high remnant pressure at 300 K ( P inc ) of ∼5.0 GPa. Elastic geobarometry on future finds of jeffbenite inclusions can use the new equation of state to estimate entrapment pressures for this phase with still highly uncertain stability field in the mantle.

Geology↗

Direct measurement of discrete valley and orbital quantum numbers in bilayer graphene

The high magnetic field electronic structure of bilayer graphene is enhanced by the spin, valley isospin, and an accidental orbital degeneracy, leading to a complex phase diagram of broken symmetry states. Here, we present a technique for measuring the layer-resolved charge density, from which we directly determine the valley and orbital polarization within the zero energy Landau level. Layer polarization evolves in discrete steps across 32 electric field-tuned phase transitions between states of different valley, spin, and orbital order, including previously unobserved orbitally polarized states stabilized by skew interlayer hopping. We fit our data to a model that captures both single-particle and interaction-induced anisotropies, providing a complete picture of this correlated electron system. The resulting roadmap to symmetry breaking paves the way for deterministic engineering of fractional quantum Hall states, while our layer-resolved technique is readily extendable to other two-dimensional materials where layer polarization maps to the valley or spin quantum numbers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Comprehensive view of microscopic interactions between DNA-coated colloids

Abstract The self-assembly of DNA-coated colloids into highly-ordered structures offers great promise for advanced optical materials. However, control of disorder, defects, melting, and crystal growth is hindered by the lack of a microscopic understanding of DNA-mediated colloidal interactions. Here we use total internal reflection microscopy to measure in situ the interaction potential between DNA-coated colloids with nanometer resolution and the macroscopic melting behavior. The range and strength of the interaction are measured and linked to key material design parameters, including DNA sequence, polymer length, grafting density, and complementary fraction. We present a first-principles model that screens and combines existing theories into one coherent framework and quantitatively reproduces our experimental data without fitting parameters over a wide range of DNA ligand designs. Our theory identifies a subtle competition between DNA binding and steric repulsion and accurately predicts adhesion and melting at a molecular level. Combining experimental and theoretical results, our work provides a quantitative and predictive approach for guiding material design with DNA-nanotechnology and can be further extended to a diversity of colloidal and biological systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗