Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffraction pattern”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Temperature-dependent ordering phenomena in single crystals of germanium antimony tellurides

The temperature-dependent behavior of quenched single-crystalline (GeTe){sub n}Sb{sub 2}Te{sub 3} (n~2.8, n~5 and n~11) was investigated by semiquantitative modeling of diffuse X-ray scattering. The structure at room temperature exhibits trigonal twin domains, each comprising a stacking-disordered sequence of distorted rocksalt-type slabs with variable thicknesses. Ge and Sb share the cation position and vacancies are partially ordered in defect layers (van der Waals gaps) between the slabs. The average structure determined with resonant diffraction data corresponds to a rocksalt-type structure whose cation position is split along the stacking direction. Upon heating, cation ordering leads to a metastable superstructure of the rocksalt type at ~400 °C, which transforms to a rocksalt-type high-temperature phase with randomly distributed cations and vacancies at ~500 °C; this structure was also refined using resonant diffraction. Cooling at high or intermediate rates does not yield the long-range ordered phase, but directly leads to the twinned disordered phase. - Graphical abstract: Development of the diffraction patterns of (GeTe){sub ~11}Sb{sub 2}Te{sub 3} upon heating; the insets symbolically sketch the real structure at the corresponding temperatures. - Highlights: • The structure of disordered (GeTe){sub n}Sb{sub 2}Te{sub 3} is described as a function of temperature. • Structural changes are tracked by modeling diffuse X-ray scattering. • Quenched crystals exhibit distorted NaCl-type slabs with different thicknesses. • Vacancy ordering upon heating leads to a metastable superstructure of the NaCl type. • Further heating leads to an undistorted disordered NaCl-type high-temperature phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cation distribution in Ni–Cu–Zn nanoferrites from {sup 57}Fe in-field Mössbauer spectra

Highlights: • Occupancy of copper ions at about 20% towards tetrahedral sites. • Distribution is proposed on the basis of % of Fe ions at both A and B sites. • Distribution is checked by estimating the theoretical lattice constant values. - Abstract: The nanoparticles of Ni{sub 1−x}Cu{sub x}Zn{sub 0.35}Fe{sub 2}O{sub 4} were synthesized by sol–gel method using polyvinyl alcohol as a chelating agent. X-ray diffraction patterns of all the samples confirmed the single phase spinel structure. The site occupancy of copper in the nanosized nickel–zinc ferrite spinels was investigated with the help of in-field Mössbauer spectroscopy. Cation distribution for the whole series of compositions was proposed by considering the amounts of iron ions present at both tetrahedral and octahedral interstitial sites in the spinel lattice. Confirmation of the proposed distributions was done by estimating quantitatively the lattice parameters for these compositions and comparing their values with those of the experimentally observed ones.

36 MATERIALS SCIENCE↗

Enhancement of magnetocaloric properties in (1 − x)La{sub 0.7}Ca{sub 0.2}Sr{sub 0.1}MnO{sub 3}/xLa{sub 0.7}Ca{sub 0.15}Sr{sub 0.15}MnO{sub 3} composite system (0 ≤ x ≤ 1)

Highlights: • The parent compounds were elaborated by solid-state reaction. • Continuous curves were investigated by the numerical calculations in (1 − x)La{sub 0.7}Ca{sub 0.2}Sr{sub 0.1}MnO{sub 3}/xLa{sub 0.7}Ca{sub 0.15}Sr{sub 0.15}MnO{sub 3} system. • The optimum magnetocaloric effect has been found for the composition with x = 0.45. - Abstract: The present work reveals an especial agreement between the experimental results and the continuous curves investigated by the numerical calculations in (1 − x)La{sub 0.7}Ca{sub 0.2}Sr{sub 0.1}MnO{sub 3}/xLa{sub 0.7}Ca{sub 0.15}Sr{sub 0.15}MnO{sub 3} composite system. Moreover, the ability to adjust the magnetic entropy change in a large temperature range is revealed to be possible by the mixture of both individual phases La{sub 0.7}Ca{sub 0.2}Sr{sub 0.1}MnO{sub 3} and La{sub 0.7}Ca{sub 0.15}Sr{sub 0.15}MnO{sub 3}. Our samples have been synthesised using the solid state method. Rietveld refinements of the X-ray diffraction patterns show that both samples are single phase. The Curie temperature T{sub C} is found to be 308 K and 338 K for La{sub 0.7}Ca{sub 0.2}Sr{sub 0.1}MnO{sub 3} and La{sub 0.7}Ca{sub 0.15}Sr{sub 0.15}MnO{sub 3}, respectively. Moreover, the magnetic entropy change and the Relative Cooling Power (RCP) values were estimated. We have shown that the optimum magnetocaloric effect at μ{sub 0}H = 2T has been found for the composition with x = 0.45, which exhibits a table-like ΔS curve with a peak value slightly lowered and strongly expanded when comparing with the parent compounds.

36 MATERIALS SCIENCE↗

Imaging single electrons to enable the generation of ultrashort beams for single-shot femtosecond relativistic electron diffraction

The generation and control of relativistic electron beams well suited for ultrafast electron diffraction application has rapidly advanced, greatly benefiting from the overlap in techniques and expertise with the accelerator community. However, imaging the diffracted MeV electrons with high detection efficiency has remained an under-explored area. In this paper, we report on a quantitative study of the imaging of MeV electrons using a detection system consisting of a phosphor screen, a lens-coupling optics, and a charge-coupled device camera. It is shown that every MeV electron in the beam yields a signal well above the camera noise. With this detection efficiency, only {approx}10{sup 5} electrons per pulse are needed to obtain a high quality single-shot diffraction pattern from a crystalline sample. We measured that such a low charge beam can be as short as 30 fs rms. Further, we discuss the possibility of compressing these electron beams to sub-5 fs rms bunch length by velocity bunching using a short high gradient rf accelerating structure scheduled to be installed next year at the UCLA Pegasus Laboratory. This opens the possibility of single-shot determinations of structural changes in many ultrafast physical processes like nonequilibrium phonon dynamics or relaxation pathways in systems with strong electron-phonon coupling.

43 PARTICLE ACCELERATORS↗

Preparation, crystal structure and enhanced bipolar response of 0.90BLNT-0.10BCT lead-free piezoceramics

In the present work, a solid solution of lead free 0.90[(Bi{sub 0.96}La{sub 0.04}){sub 0.5}Na{sub 0.5}TiO{sub 3}]-0.10(Ba{sub 0.90}Ca{sub 0.10}TiO{sub 3}] (abbreviated as 0.90BLNT-0.10BCT) piezoceramics has been synthesized by semi-wet technique. X-ray diffraction pattern confirms the phase formation. Rietveld refinement of XRD data demonstrates the coexistence of rhombhohedral (R3c) + tetragonal (P4mm) phase at room temperature. Raman spectrum is also support the above analysis. A large enhancement in bipolar strain of 0.12 % and calculated normalized strain, d*{sub 33} (defined as S{sub max}/E{sub max}) ~ 265 pm/V at 40kV/cm has been observed for this composition as compared to pure BLNT specimen, which make possible it as a potential lead-free candidates for piezoelectric applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Temperature evolution of structure and magnetic properties in the perovskite Sr{sub 2}MnSbO{sub 6}

The structural and magnetic properties of the perovskite Sr{sub 2}MnSbO{sub 6} have been studied. Combining neutron and X-ray powder diffraction data, the temperature evolution of the structural parameters was investigated with the Rietveld method between 2 and 1000 K. The crystal structure is tetragonal (space group I4/m) within the temperature interval of 2-750 K and cubic (space group Fm-3m) above 750 K. Both octahedral B-site positions were found to be partially occupied by Mn and Sb, but with different Mn/Sb ratios. The magnetic susceptibilities showed irreversibility between field cooled and zero-field cooled (ZFC) conditions and spin glass like magnetic dynamics including aging and memory phenomena at temperatures below 30 K; all appearing well above a broad maximum at 13 K in the ZFC susceptibility curves. This suggests that the material reaches an unconventional spin-glass state at low temperatures, possibly arising from a competitive situation between the double exchange (ferromagnetism) and the super-exchange (antiferromagnetism). Neutron diffraction patterns showed no evidence of a long-range magnetic ordering at 2 K which is consistent with spin glass behavior. The factors governing the observed structural and magnetic properties of Sr{sub 2}MnSbO{sub 6} are discussed and compared with those of other quaternary Mn- and Sb-containing perovskites. Graphs of the temperature of magnetic phase transitions as functions of the cation size were constructed and are discussed for the AB{sup 3+}{sub 1/2}B{sup 5+}{sub 1/2}O{sub 3} series with isomorphous substitution of B{sup 3+} and B{sup 5+} cations. Possible influence of the A-cation sublattice on magnetic properties is also shortly considered.

36 MATERIALS SCIENCE↗

Luminescent properties of long lasting phosphor Ca{sub 2}MgSi{sub 2}O{sub 7}:Eu{sup 2+}

Long afterglow phosphors (Ca{sub 1-x}Eu{sub x}){sub 2}MgSi{sub 2}O{sub 7} (0.002 {<=} x {<=} 0.02) were prepared by solid-state reactions under a weak reductive atmosphere. X-ray diffraction pattern, photoluminescence spectra, decay curve, afterglow spectra and thermoluminescence curves were investigated. The phosphors showed two emission peaks when they were excited by 343 nm, due to two types of Eu{sup 2+} centers existing in the Ca{sub 2}MgSi{sub 2}O{sub 7} lattice. However, only one emission peak can be found in their afterglow spectra. Energy transfer between Eu{sup 2+} ions in inequivalent sites was found. A possible mechanism was presented and discussed. The afterglow decay time of Ca{sub 1.998}MgSi{sub 2}O{sub 7}:Eu{sub 0.002} was nearly 12.5 h which means it was a good long lasting phosphor.

36 MATERIALS SCIENCE↗

Effect of composition on electrical properties of lead-free Bi{sub 0.5}(Na{sub 0.80}K{sub 0.20}){sub 0.5}TiO{sub 3}-(Ba{sub 0.98}Nd{sub 0.02})TiO{sub 3} piezoelectric ceramics

Lead-free piezoelectric ceramics with the composition of (1-x)Bi{sub 0.5}(Na{sub 0.80}K{sub 0.20}){sub 0.5}TiO{sub 3}-x(Ba{sub 0.98}Nd{sub 0.02})TiO{sub 3} or (1-x) BNKT-xBNdT (with x = 0-0.20 mol fraction) have been synthesized by a conventional mixed-oxide method. The compositional dependence of phase structure and electrical properties of the ceramics were systemically studied. The optimum sintering temperature of all BNKT-BNdT ceramics was found to be 1125 Degree-Sign C. X-ray diffraction pattern suggested that BNdT effectively diffused into BNKT lattice during sintering to form a solid solution with a perovskite structure. Scanning electron micrographs showed a slight reduction of grain size when BNdT was added. It was found that BNKT-0.10BNdT ceramic exhibited optimum electrical properties ({epsilon}{sub r} = 1716, tan{delta} = 0.0701, T{sub c} = 327 Degree-Sign C, and d{sub 33} = 211 pC/N), suggesting that this composition has a potential to be one of a promising lead-free piezoelectric candidate for dielectric and piezoelectric applications.

36 MATERIALS SCIENCE↗

Effect of oxidizer on grain size and low temperature DC electrical conductivity of tin oxide nanomaterial synthesized by gel combustion method

Nanocrystalline Tin oxide material with different grain size was synthesized using gel combustion method by varying the fuel (C{sub 6}H{sub 8}O{sub 7}) to oxidizer (HNO{sub 3}) molar ratio by keeping the amount of fuel as constant. The prepared samples were characterized by using X-Ray Diffraction (XRD), Scanning Electron Microscope (SEM) and Energy Dispersive Analysis X-ray Spectroscopy (EDAX). The effect of fuel to oxidizer molar ratio in the gel combustion method was investigated by inspecting the grain size of nano SnO{sub 2} powder. The grain size was found to be reduced with the amount of oxidizer increases from 0 to 6 moles in the step of 2. The X-ray diffraction patterns of the calcined product showed the formation of high purity tetragonal tin (IV) oxide with the grain size in the range of 12 to 31 nm which was calculated by Scherer's formula. Molar ratio and temperature dependence of DC electrical conductivity of SnO{sub 2} nanomaterial was studied using Keithley source meter. DC electrical conductivity of SnO{sub 2} nanomaterial increases with the temperature from 80K to 300K. From the study it was observed that the DC electrical conductivity of SnO{sub 2} nanomaterial decreases with the grain size at constant temperature.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

X-ray diffraction and Raman scattering study of Cr-doped ZnFe{sub 2}O{sub 4} spinel ferrites

XRD and Raman scattering measurements were made on polycrystalline ZnFe{sub 2-x}Cr{sub x}O{sub 4} (x=0.0, 0.1, 0.2) spinel ferrites as prepared by solid-state reaction route. Rietveld refined X-ray diffraction pattern confirmed the formation of single-phase and are indexed in cubic structure with Fd3m space group. Slight reduction in the lattice parameter from 8.435 to 8.410 Ǻ, with Cr{sup 3+} ion substitution has been observed. From Raman scattering spectra, the modes of ZnFe{sub 1.9}Cr{sub 0.1}O{sub 4} and ZnFe{sub 1.8}Cr{sub 0.2}O{sub 4} are shifted towards the lower frequency side as compared to ZnFe{sub 2}O{sub 4}, this red shift is attributed to higher atomic mass of Zn (65.39 amu) as compared to Fe (55.84 amu)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Three-dimensional coherent X-ray diffractive imaging of whole frozen-hydrated cells

Here, a structural understanding of whole cells in three dimensions at high spatial resolution remains a significant challenge and, in the case of X-rays, has been limited by radiation damage. By alleviating this limitation, cryogenic coherent diffractive imaging (cryo-CDI) can in principle be used to bridge the important resolution gap between optical and electron microscopy in bio-imaging. Here, the first experimental demonstration of cryo-CDI for quantitative three-dimensional imaging of whole frozen-hydrated cells using 8 Kev X-rays is reported. As a proof of principle, a tilt series of 72 diffraction patterns was collected from a frozen-hydrated Neospora caninum cell and the three-dimensional mass density of the cell was reconstructed and quantified based on its natural contrast. This three-dimensional reconstruction reveals the surface and internal morphology of the cell, including its complex polarized sub-cellular structure. Finally, it is believed that this work represents an experimental milestone towards routine quantitative three-dimensional imaging of whole cells in their natural state with spatial resolutions in the tens of nanometres.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

From Ba{sub 3}Ta{sub 5}O{sub 14}N to LaBa{sub 2}Ta{sub 5}O{sub 13}N{sub 2}: Decreasing the optical band gap of a photocatalyst

Yellow LaBa{sub 2}Ta{sub 5}O{sub 13}N{sub 2} was successfully synthesized as phase-pure material crystallizing isostructurally to previously reported Ba{sub 3}Ta{sub 5}O{sub 14}N and mixed-valence Ba{sub 3}Ta{sup V}{sub 4}Ta{sup IV}O{sub 15}. The electronic structure of LaBa{sub 2}Ta{sub 5}O{sub 13}N{sub 2} was studied theoretically with the range-separated hybrid method HSE06. The most stable structure was obtained when lanthanum was placed on 2a and nitrogen on 4h sites confirming Pauling's second rule. By incorporating nitrogen, the measured band gap decreases from ∼3.8 eV for the oxide via 2.74 eV for Ba{sub 3}Ta{sub 5}O{sub 14}N to 2.63 eV for the new oxide nitride, giving rise to an absorption band well in the visible-light region. Calculated fundamental band gaps confirm the experimental trend. The atom-projected density of states has large contributions from N2p orbitals close to the valence band edge. These are responsible for the observed band gap reduction. Photocatalytic hydrogen formation was investigated and compared with that of Ba{sub 3}Ta{sub 5}O{sub 14}N revealing significantly higher activity for LaBa{sub 2}Ta{sub 5}O{sub 13}N{sub 2} under UV-light. - Graphical abstract: X-ray powder diffraction pattern of LaBa{sub 2}Ta{sub 5}O{sub 13}N{sub 2} with the results of the Rietveld refinements. Inset: Unit cell of LaBa{sub 2}Ta{sub 5}O{sub 13}N{sub 2} and polyhedral representation of the crystal structure. - Highlights: • Synthesis of a new oxide nitride LaBa{sub 2}Ta{sub 5}O{sub 13}N{sub 2}. • Refinement of the crystal structure. • Quantum chemical calculations provided band gap close to the measured value. • New phase shows a higher photocatalytic H{sub 2} evolution rate compared to prior tested Ba{sub 3}Ta{sub 5}O{sub 14}N.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Beamline electrostatic levitator for in situ high energy x-ray diffraction studies of levitated solids and liquids

Determinations of the phase formation sequence, crystal structures and the thermo-physical properties of materials at high temperatures are hampered by contamination from the sample container and environment. Containerless processing techniques, such as electrostatic (ESL), electromagnetic, aerodynamic, and acoustic levitation, are most suitable for these studies. An adaptation of ESL for in situ structural studies of a wide range of materials using high energy (30-130 keV) x rays at a synchrotron source is described here. This beamline ESL (BESL) allows the in situ determination of the atomic structures of equilibrium solid and liquid phases, undercooled liquids and time-resolved studies of solid-solid and liquid-solid phase transformations. The use of area detectors enables the rapid acquisition of complete diffraction patterns over a wide range (0.5-14 {angstrom}{sup -1}) of reciprocal space. The wide temperature range (300-2500 K), containerless processing environment under high vacuum (10{sup -7}-10{sup -8} Torr), and fast data acquisition capability, make BESL particularly well suited for phase stability studies of high temperature solids and liquids. An additional, but important, feature of BESL is the capability for simultaneous measurements of a host of thermo-physical properties including the specific heat, enthalpy of transformation, solidus and liquidus temperatures, density, viscosity, and surface tension, all on the same sample during the structural measurements.

36 MATERIALS SCIENCE↗

Soft chemical synthesis of Ag{sub 3}SbS{sub 3} with efficient and recyclable visible light photocatalytic properties

Highlights: • Highly crystalline Ag{sub 3}SbS{sub 3} synthesized using soft chemical approach. • First time report of photocatalytic activity of Ag{sub 3}SbS{sub 3}. • Ag{sub 3}SbS{sub 3} degraded the harmful organic dyes rapidly under visible radiation. • Pseudo first order kinetics have been followed in these sets of reactions. • Up to 90% of Methylene Blue degraded even after 4th cycle of catalyst reuse. • Structure of catalyst is intact after reuse. • As the catalyst is heavy, its separation after use is quite simple. - Abstract: Application of Ag{sub 3}SbS{sub 3}, obtained by soft chemical approach involving rapid reaction of air stable metal–thiourea complexes in ethylene glycol medium, as visible light photocatalyst for the degradation of dye solutions was investigated. Ag{sub 3}SbS{sub 3} was confirmed by high resolution powder X-ray diffraction pattern and its no defined morphology was present in SEM images. From UV–vis spectroscopy measurements, optical band gap of 1.77 eV was deduced for Ag{sub 3}SbS{sub 3}. Rapid degradation kinetics and recyclability was exhibited by Ag{sub 3}SbS{sub 3} towards Methylene Blue, Methyl Orange, Malachite Green, and Rhodamine 6G dye solutions under visible radiation. All these processes followed pseudo first order kinetics. High surface area (6.39 m{sup 2}/g), with mesopores (3.81 nm), arising from solvent mediated synthesis of Ag{sub 3}SbS{sub 3} has been correlated to its catalytic activity.

36 MATERIALS SCIENCE↗

Fabrication and characterization of the gapless half-Heusler YPtSb thin films

Half-Heusler YPtSb thin films were fabricated by magnetron co-sputtering method on MgO-buffered SiO{sub 2}/Si(001) substrates. X-ray diffraction pattern and energy dispersive X-ray spectroscopy confirmed the high-quality growth and stoichiometry. The temperature dependence of the resistivity shows a semiconducting-type behavior down to low temperature. The Hall mobility was determined to be 450 cm{sup 2}/V s at 300 K, which is much higher than the bulk value ({approx}300 cm{sup 2}/V s). In-plane magnetoresistance (MR) measurements with fields applied along and perpendicular to the current direction show opposite MR signs, which suggest the possible existence of the topological surface states.

36 MATERIALS SCIENCE↗

Epitaxial Cu{sub 2}ZnSnS{sub 4} thin film on Si (111) 4° substrate

To explore the possibility of Cu{sub 2}ZnSnS{sub 4} (CZTS)/Si based tandem solar cells, the heteroepitaxy of tetragonal Cu{sub 2}ZnSnS{sub 4} thin films on single crystalline cubic Si (111) wafers with 4° miscut is obtained by molecular beam epitaxy. The X-ray θ-2θ scan and selected area diffraction patterns of the CZTS thin films and Si substrates, and the high resolution transmission electron microscopy image of the CZTS/Si interface region demonstrate that the CZTS thin films are epitaxially grown on the Si substrates. A CZTS/Si P-N junction is formed and shows photovoltaic responses, indicating the promising application of epitaxial CZTS thin films on Si.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural and morphological studies on Bi{sub 1-x}Ca{sub x}MnO{sub 3} thin films grown by RF magnetron sputtering

Bi{sub 1-x}Ca{sub x}MnO{sub 3} (0 ≤ X ≤ 0.4) thin films are deposited on n–type Si (100) substrate at 800 °C by RF magnetron sputtering. X-ray diffraction pattern shows that the films are crystallized in monoclinic structure with C2 space group. The crystallite size and induced strain in the prepared films are measured by W-H plot. The cell parameters and texture coefficient of the films are calculated. The surface morphology of the films is examined by atomic force microscope. The study confirms the optimum level of calcium doping is 20 at. % in Bi site of BiMnO{sub 3} film, these findings pave the way for further research in the Ca modified BiMnO{sub 3} films towards device fabrication.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural studies on doped MnTiO{sub 3}

We investigate here the temperature evolution of dc susceptibility and x-ray diffraction patterns of MnTi{sub 0.8}Ru{sub 0.2}O{sub 3}. With increase in doping, a broad peak and a sharp peak is observed ~ 75 and 48 K, respectively in the dc susceptibility data. The broad peak corresponds to the 2 dimensional antiferromagnetic structure and the sharp peak to T{sub N}. The sharpness of T{sub N} suggests stronger 3 dimensional character. This is well depicted in the temperature dependent lattice parameters also. These results provide playground for understanding the role of Ti ions, dimensional cross over on the exotic properties exhibited by them.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗