Search NASA⌕ Search

SEARCH · Search NASA

Results for “Excel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

V2O5 nanowires-graphene composite as an outstanding electrode material for high electrochemical performance and long-cycle-life supercapacitor

Highlights: • V{sub 2}O{sub 5} nanowires anchored on the surface of rGO sheets using facile hydrothermal method for energy storage application. • High gravimetric capacitance of 1002 F g{sup −1} has been achieved at the current density of 1 A g{sup −1} in an aqueous electrolyte. • Exceptionally high energy density of 116 Wh kg{sup −1} has been obtained using supercapacitor coin cell. • Composite (V{sub 2}O{sub 5}-NW-G) exhibits excellent cyclic stability with 83.94 % capacitance retention after 5000 GCD cycles. - Abstract: A composite of V{sub 2}O{sub 5} nanowires with reduced graphene oxide (V{sub 2}O{sub 5}-NW-G) has been prepared using facile hydrothermal method and tested for charge storage supercapacitor application. Morphological and structural aspects of as prepared materials has been studied using material characterization techniques like transmission electron microscope (TEM), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). The nanosized wires like structure of V{sub 2}O{sub 5} anchored on the graphene (rGO) sheets possesses improved electrical conductivity and high surface area. Electrochemical properties of the synthesized materials have been studied using cyclic voltammetry (CV), galvanostatic charge-discharge (GCD) and electrochemical impedance spectroscopy (EIS). Composite (V{sub 2}O{sub 5}-NW-G) exhibits exceptional properties like high gravimetric capacitance of 1002 F g{sup −1} along with good cyclic stability of 83.94% capacitance retention after 5000 repetitive GCD cycles. Excellent energy density of 116 Wh kg{sup −1} has been obtained at the power density of 1520 W kg{sup −1}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Amino-tethering synthesis strategy toward highly accessible sub-3-nm L1 0 -PtM catalysts for high-power fuel cells

Because of the poor accessibility of embedded active sites, platinum (Pt)-based electrocatalysts suffer from insufficient Pt utilization and mass transport in membrane electrode assemblies (MEAs), limiting their performance in polymer electrolyte membrane fuel cells. Here, we report a simple and universal approach to depositing sub-3-nm L1 0 -PtM nanoparticles over external surfaces of carbon supports through pore-tailored amino (NH 2 )-modification, which enables not only excellent activity for the oxygen reduction reaction, but also enhanced Pt utilization and mass transport in MEAs. Using a low loading of 0.10 mg Pt ∙cm -2 , the MEA of PtCo/KB-NH 2 delivered an excellent mass activity of 0.691 A∙mgPt -1 , a record-high power density of 0.96 W∙cm -2 at 0.67 V, and only a 30-mV drop at 0.80 A∙cm -2 after 30,000 voltage cycles, which meets nearly all targets set by the Department of Energy. Finally, this work provides an efficient strategy for designing advanced Pt-based electrocatalysts and realizing high-power fuel cells.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Advancements in cerium/titanium metal-organic frameworks: Unparalleled stability in CO oxidation

Due to the excellent catalytic properties of Ce-based materials, the development of thermally stable metal-organic frameworks (MOFs) based on Ce-oxo clusters has attracted significant attention but remains challenging. In this work, we report the synthesis of an unreported Ce 4 Ti 2 -TMA (Ce IV 4 Ti IV 2 O 4 (OH) 4 (C(CH 3 ) 3 COO) 12 ·3H 2 O·3MeCN) cluster, which serves as an ideal source for the assembly of robust Ce/Ti-MOFs. Using this cluster, we constructed two isostructural MOFs, denoted as NU-3000 and NU-3001. Single-crystal X-ray diffraction analysis confirms these MOFs as mesoporous structures with 12-coordinated Ce 3 Ti 3 nodes. Furthermore, structural analysis reveals a plane triangular node structure that likely contributes to the excellent thermal stability of these MOFs. Finally, both MOFs show catalytic activity toward high-temperature (250°C) CO oxidation and maintain significant porosity, emphasizing the thermal stability of these materials under practical catalytic conditions. Furthermore, the straightforward synthesis of thermally robust Ce/Ti-MOFs from the Ce 4 Ti 2 -TMA cluster will pave the way for future Ce/Ti-MOF-based catalyst development.

36 MATERIALS SCIENCE↗

A reversible perovskite air electrode for active and durable oxygen reduction and evolution reactions via the A-site entropy engineering

The performance of reversible solid oxide electrochemical cells (R-SOECs) is largely hindered by the insufficient electroactivity and poor durability of the bifunctional air electrodes, where the oxygen reduction and evolution reactions (ORR and OER) occur. Here, we report our findings in boosting the electrochemical activity and durability of an air electrode with Pr 0.2 Ba 0.2 Sr 0.2 La 0.2 Ca 0.2 CoO 3-δ (PBSLCC) via an A-site entropy engineering. The PBSLCC electrode shows enhanced oxygen reaction activity and excellent durability compared to binary and ternary double perovskites (PrBaCo 2 O 5+δ and Pr 0.8 Ba 0.8 Ca 0.4 Co 2 O 5+δ , respectively). A low and nearly unchanged area-specific resistance of 0.042Ωcm 2 is achieved at 750 °C during the 225-h stability test. La 0.9 Sr 0.1 Ga 0.8 Mg 0.2 O 3-δ electrolyte-supported cells with the PBSLCC air electrode show remarkable performance at 800 °C, demonstrating a peak power density of 1.2Wcm -2 in the fuel cell mode, and a current density of -1.1 Acm -2 at 1.3 V in the electrolysis mode while maintaining the excellent cycling durability of 228 h at ±0.5 Acm -2 under humidified H 2 (10% H 2 O). A bulk oxygen p-band center model is applied to verify that tailoring of the A-site entropy strongly influences the surface exchange coefficients (k* chem ), leading to higher oxygen reaction activity of PBSLCC than the binary and ternary perovskites. Finally, this study opens a new class of high-entropy perovskites for the rational design of air electrodes for R-SOECs with high activity and durability.

30 DIRECT ENERGY CONVERSION↗

Multifunctional transition metal doped titanium dioxide reduced graphene oxide composites as highly efficient adsorbents and photocatalysts

A series of novel, mesoporous transition metal doped titanium dioxide-reduced graphene oxide composites are synthesized where the dopants were Mn, Co, Ni, Mo, and W. An in-situ synthesis method was used which involves a green, economic, hydrothermal process which can be scaled up easily. The composites show high surface areas (165–245 m 2 /g) and monomodal pore size distributions with average pore diameters in the range of 3–5 nm. The homogeneous distributions of the dopants are seen in SEM-EDX mapping data. The indirect band gaps of the composite materials are in the range of 2.20–2.48 eV. The composites show excellent dye adsorption activities where 100% adsorption of Rhodamine B occurs within 5 min when Mo–TiO 2 /rGO composite is used. Furthermore, the adsorbed dye can either be desorbed or photocatalytically degraded and the composite is reusable up to 10 cycles without losing significant activity. Mo–TiO 2 /rGO composite showed excellent adsorption of both cationic and anionic dyes at neutral pH.

36 MATERIALS SCIENCE↗

Thin-film semiconductor perspective of organometal trihalide perovskite materials for high-efficiency solar cells

Organolead trihalide perovskites (OTPs) are arising as a new generation of low-cost active materials for solar cells with efficiency rocketing from 3.5% to over 20% within only five years. From “dye” in dye sensitized solar cells to “hole conductors” and “electron conductors” in mesoscopic heterojunction solar cells, there has been a dramatic conceptual evolution on the function of OTPs in photovoltaic devices. OTPs were originally used as dyes in Gratzel cells, achieving a high efficiency above 15% which, however, did not manifest the excellent charge transport properties of OTPs. An analogy of OTPs to traditional semiconductors was drawn after the demonstration of highly efficient planar heterojunction structure OTP devices and the observation of their excellent bipolar transport properties with a large diffusion length exceeding 100 nm in CH 3 NH 3 PbI 3 (MAPbI 3 ) polycrystalline thin films. Here, this review aims to provide the most recent advances in the understanding of the origin of the high OTP device efficiency. Specifically we will focus on reviewing the progress in understanding 1) the characterization of fantastic optoelectronic property of OTPs, 2) the unusual defect physics that originate the optoelectronic property; 3) morphology control of the perovskite film from fabrication process and film post-treatment, and 4) device interface and charge transport layers that dramatically impact device efficiency in the OTP thin film devices; 5) photocurrent hysteresis; 6) tandem solar cells; 7) stability of the perovskite materials and solar cell devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

An atomistic study connecting underlying dislocation behavior with superior mechanical properties of NiCoCr medium entropy alloy

NiCoCr-based medium-entropy alloy (MEA) with a simple face-centered cubic crystal phase exhibits excellent mechanical properties, often attributed to the synergy of multiple deformation mechanisms. However, the atomistic origin of their outstanding mechanical response, including microstructural evolution and dislocation behavior under varying strain-rates and orientation, remains unclear. In this work, we employ large-scale molecular dynamics (MD) simulations to investigate the changes in deformation mechanisms along three distinct orientations ([110], [111], [100]) under varying strain rates (1 ×10 8 /sec, 1 ×10 10 /sec, 1 ×10 12 /sec) in the NiCoCr MEA. The presence of the stair-rod and the Shockley partial dislocations under uniaxial tensile strain are found to play a key role in the formation of deformation twinning and ε-martensite, which positively correlates with strain-rate dependent dislocation analysis. These findings further establish the role of the dislocations in controlling the superior mechanical response and excellent fracture toughness of the NiCoCr MEA. Systematic transmission-electron microscopy tests performed on the [111]-oriented crystals, deformed at different strain levels, at room temperature provide clear evidence of both the extended stacking-fault and the stair rods, confirming the predicted microstructural features. Finally, this study offers key insights into the complex nucleation mechanisms of deformation twinning and ε-martensite, such as twinning – and transformation–induced plasticity (TWIP-TRIP), providing valuable guidelines for studying similar material classes.

36 MATERIALS SCIENCE↗

3D printing technologies for electrochemical energy storage

Fabrication of electrodes and electrolytes play an important role in promoting the performance of electrochemical energy storage (EES) devices such as batteries and supercapacitors. Traditional fabrication techniques have limited capability in controlling the geometry and architecture of the electrode and solid-state electrolytes, which would otherwise compromise the performance. 3D printing, a disruptive manufacturing technology, has emerged as an innovative approach to fabricating EES devices from nanoscale to macroscale and from nanowatt to megawatt, providing great opportunities to accurately control device geometry (e.g., dimension, porosity, morphology) and structure with enhanced specific energy and power densities. Moreover, the additive manufacturing nature of 3D printing provides excellent controllability of the electrode thickness with much simplified process in a cost effective manner. With the unique spatial and temporal material manipulation capability, 3D printing can integrate multiple nanomaterials in the same print, and multi-functional EES devices (including functional gradient devices) can be fabricated. Herein, we review recent advances in 3D printing of EES devices. We focused on two major 3D printing technologies including direct writing and inkjet printing. The direct material deposition characteristics of these two processes enable them to print on a variety of flat substrates, even a conformal one, well suiting them to applications such as wearable devices and on-chip integrations. Other potential 3D printing techniques such as freeze nano-printing, stereolithography, fused deposition modeling, binder jetting, laminated object manufacturing, and metal 3D printing are also introduced. The advantages and limitations of each 3D printing technology are extensively discussed. More importantly, we provide a perspective on how to integrate the emerging 3D printing with existing technologies to create structures over multiple length scale from macro to nano for EES applications.

3D printing↗

Effect of Calcination Temperature on the Electrochemical Properties of Nickel-rich LiNi0.76Mn0.14Co0.10O2 Cathodes for Lithium-ion Batteries

High energy density nickel (Ni)-rich layered LiNixMnyCozO2 (NMC, x = 0.6) materials are promising cathodes for lithium-ion batteries. However, several technical challenges, such as fast capacity fading, are hampering their large scale application. Herein, we demonstrate that a Ni-rich cathode LiNi0.76Mn0.14Co0.10O2 (NMC76) calcined at an optimal temperature of 750~775oC exhibits a high discharge capacity (~215 mAh g-1 when charged to 4.5 V) and an excellent high rate capability. Even at a 10C rate, it still exhibits a capacity of more than 160 mAh g-1 and retains ca. 79% of its initial capacity after 200 cycles. The high performance of NMC76 is directly related to its optimized primary particle size (that constitute the spherical secondary particles of >10 m) and cation mixing. Higher calcination temperature (= 800 oC) leads to rapid increase of primary particle size, poor cycling stability, and inferior rate capability of NMC76 due to its severe micro strain and crack formation upon repeated lithium ion de/intercalations. Therefore, NMC76 calcined at 750~775oC is a very good candidate for the next generation of Li ion batteries.

nickel-rich cathodes, calcination temperature, cyc↗

Nitrogen and sulfur co-doped porous carbon sheets for energy storage and pH-universal oxygen reduction reaction

Developing efficient electrocatalysts for energy storage and oxygen reduction reaction (ORR) is of great sig-nificance for the utilization of renewable energy. In particular, designing catalysts with both promising activityand long stability for ORR in pH-universal electrolytes still remain as a tremendous challenge. To tackle such aproblem, metal-free nitrogen and sulfur co-doped porous carbon sheet (NSPCS) was rationally designed in thiswork in order to integrate the two reported routes of enhancing the electrocatalytic activity of graphene. The as-prepared NSPCS has an onset potential of 0.89 V vs. RHE, and half-wave potential E1/2 ≈ 0.75 V during ORR inacidic solution, making it as the most active ORR catalyst. Moreover, the resulting NSPCS also shows a 0.03 Vpositive shift of half-wave potential than commercial Pt/C for ORR and excellent charge capacitive performancein alkaline media. Electron microscopy revealed high degree of defects on NSPCS surface. This, coupled withsynergistic doping effects of nitrogen and sulfur, optimized the active sites and charge transfer, rationalized theoutstanding performance in both oxygen reduction reactions and supercapacitors.Developing efficient electrocatalysts for energy storage and oxygen reduction reaction (ORR) is of great significance for the utilization of renewable energy. In particular, designing catalysts with both promising activity and long stability for ORR in pH-universal electrolytes still remain as a tremendous challenge. To tackle such a problem, metal-free nitrogen and sulfur co-doped porous carbon sheet (NSPCS) was rationally designed in this work in order to integrate the two reported routes of enhancing the electrocatalytic activity of graphene. The as-prepared NSPCS has an onset potential of 0.89 V vs. RHE, and half-wave potential E-1/2 approximate to 0.75 V during ORR in acidic solution, making it as the most active ORR catalyst. Moreover, the resulting NSPCS also shows a 0.03 V positive shift of half-wave potential than commercial Pt/C for ORR and excellent charge capacitive performance in alkaline media. Electron microscopy revealed high degree of defects on NSPCS surface. This, coupled with synergistic doping effects of nitrogen and sulfur, optimized the active sites and charge transfer, rationalized the outstanding performance in both oxygen reduction reactions and supercapacitors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High rate and long cycle life in Li-O 2 batteries with highly efficient catalytic cathode configured with Co 3 O 4 nanoflower

The reaction mechanism of non-aqueous Li-O 2 batteries is based on the deposition and decomposition of Li 2 O 2 . The polarization of Li-O 2 batteries can be rapidly increased by operation under a high rate condition, resulting in the early capacity fade of the cells. Therefore, a well-designed catalyst with a unique structure and excellent catalytic ability is an important way to boost the round-trip performance of Li-O 2 batteries, especially under high current density. In this work, a unique nanoflower structure assembled with Co 3 O 4 nanosheets is synthesized by using 2-methylimidazole (2-MIM) as a structural directing agent. X-ray photoelectron spectroscopy (XPS) and Raman spectra reveal abundant oxygen vacancies on the surface of the Co 3 O 4 nanoflower, which are beneficial for oxygen reduction and evolution reactions and long round-trip lifetime. Density functional theory results demonstrate that Co 3 O 4 catalyst with oxygen vacancies could promote the wetting of Li 2 O 2 on substrate and formation of a Li 2 O 2 nanofilm, thereby boosting the discharge capacity of Li-O 2 batteries. On account of the synergistic effect of abundant oxygen vacancies, the unique structure, and excellent oxygen evolution reaction, Co 3 O 4 nanoflower-based cells could deliver ultralong lifetime of 276 and 248 cycles with a discharge capacity of 1000 mAh g(-1) under charge/discharge current densities of 0.5 A g -1 and 1 A g -1 , respectively. Finally, this study has shed light on a new strategy for catalyst preparation for long lifetime Li-O 2 batteries.

25 ENERGY STORAGE↗

NASICON-type Na 3 Fe 2 (PO 4 ) 3 as a low-cost and high-rate anode material for aqueous sodium-ion batteries

Aqueous sodium-ion batteries are attractive battery alternatives for stationary energy storage due to their inherently low cost and high safety. The development of advanced electrode materials with excellent performance and low cost is crucial for the success of aqueous Na-ion batteries. Albeit the high capacity and stable cycling of the leading anode of NaTi 2 (PO 4 ) 3 , the high price of titanium element and the low Na-insertion potential close to the hydrogen evolution reaction may plague its application. Here we introduced a NASICON-type Na 3 Fe 2 (PO 4 ) 3 as a promising anode alternative for aqueous Na-ion batteries. Synchrotron X-ray diffraction and spectroscopy confirm its phase and atomic structure. Electrochemical characterization and X-ray photoelectron spectroscopy reveal the reversible Na+ insertion in Na 3 Fe 2 (PO 4 ) 3 due to the Fe 3+ /Fe 2+ redox couple, which renders a specific capacity of ~60 mAh g -1 and excellent cycling of 1000 cycles at 10C rate. A Super high rate of 100C was also achieved for this anode with a capacity retention of 61% after 1000 cycles. In addition, the Na 3 Fe 2 (PO 4 ) 3 anode is paired with a Prussian white analogue of Na 2 Mn[Fe(CN) 6 ] into a full cell, exhibiting promising cell performance and material sustainability. Furthermore, our work underlines the importance of fabricating aqueous batteries on the basis of the Earth-abundant, cost-effective, and non-toxic elements.

25 ENERGY STORAGE↗

A General Strategy for Batch Development of High-Performance and Cost-Effective Sodium Layered Cathodes

High-performance and low-cost transition metal (TM) layered oxides using earth abundant elements are promising cathodes for Na-ion batteries. However, it is challenging to obtain desired materials because the large Na size, different Na occupations and various layer stacking sequences multiply the complication in determining the structure of a given composition and exacerbate uncertainty to the structure-property correlation. In this work, we use the attainment of desired NaxMnyNiZTM1-y-zO2-based cathode materials as an example to demonstrate a general roadmap for batch development of sodium layered cathodes towards practical applications. A synthesis phase diagram of NaxMnyNi1-yO2 was created for pre-screening and rational selection of the platform material of P2/O3-structured Na0.85Mn0.6Ni0.4O2. Cationic potential was leveraged in elemental substitution to further promote the material structural stability and electrochemical performance. Several cost-effective O3 and P2/O3 hybrid cathode materials have been obtained, all of which demonstrate excellent performance. In particular, the Na0.85Mn0.5Ni0.4Ti0.1O2 delivers a high specific capacity of ~130 mAh/g between 2-4 V and 91% retention after 500 cycles. The work discovers multiple materials as high-performance and cost-effective Na-ion battery cathodes and offers critical guidance to the rational design of future layered cathode materials.

Xiao, Biwei↗

Terminally fluorinated glycol ether electrolyte for lithium metal batteries

Despite being an excellent candidate for lithium metal batteries due to its stability towards lithium metal, ethereal solvent suffers from relatively low anodic stability, rendering it incompatible with high voltage cathode. Although the anodic stability of ethereal solvent can be enhanced by fluorination, the lithium solvating ability of fluorinated ethers is largely reduced. As a result, common hydrofluoroethers, such as 1,1,2,2-tetrafluoroethyl-2,2,3,3-tetrafluoropropylether (TTE) and bis(2,2,2-trifluoroethyl) ether (BTFE) are not able to dissolve any lithium salt, albeit enhanced oxidation potential. Therefore, new fluorinated glycol ethers were synthesized in this research. The diglyme analog, which was terminally fluorinated, demonstrated high anodic stability and excellent capability to facilitate lithium plating/stripping. Unlike its non-fluorinated counterpart, the fluorinated diglyme analog displayed outstanding compatibility with lithium hexafluorophosphate, which is an essential salt in lithium-ion batteries. Here it was shown that the electrolyte based on fluorinated diglyme analog with fluoroethylene carbonate as co-solvent enabled highly stable cycling of Li-metal batteries pairing with layered oxide cathode.

25 ENERGY STORAGE↗

Neutron and gamma-ray energy reconstruction for characterization of special nuclear material

Characterization of special nuclear material may be performed using energy spectroscopy of either the neutron or gamma-ray emissions from the sample. Gamma-ray spectroscopy can be performed relatively easily using high-resolution semiconductors such as high-purity germanium. Neutron spectroscopy, by contrast, is a complex inverse problem. Here, results are presented for 252 Cf and PuBe energy spectra unfolded using a single EJ309 organic scintillator; excellent agreement is observed with the reference spectra. Neutron energy spectroscopy is also possible using a two-plane detector array, whereby time-offlight kinematics can be used. With this system, energy spectra can also be obtained as a function of position. Finally, spatial-dependent energy spectra are presented for neutron and gamma-ray sources that are in excellent agreement with expectations.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Effects of Packaging SrI2(Eu) Scintillator Crystals

Recent renewed emphasis placed on gamma-ray detectors for national security purposes has motivated 13 researchers to identify and develop new scintillator materials capable of high energy resolution and 14 growable to large sizes. We have discovered that SrI2(Eu) has many desirable properties for gamma-ray 15 detection and spectroscopy, including high light yield of ~90,000 photons/MeV and excellent light yield 16 proportionality. Furthermore, we have demonstrated growth of crack-free 2 diameter boules. We 17 have measured <2.7% FWHM at 662 keV with small detectors (<1 cm3) in direct contact with a 18 photomultiplier tube, and ~3% resolution at 662 keV is obtained for 1 in3 crystals. Due to the 19 hygroscopic nature of SrI2(Eu), proper packaging is required for field use. This work describes a 20 systematic study performed to determine the key factors in the packaging process to optimize 21 performance. These factors include proper polishing of the surface, the geometry of the crystal, 22 reflector materials and windows. A technique based on use of a collimated Cs-137 source was developed 23 to examine light collection uniformity. Employing this technique, we found that when the crystal is 24 packaged properly, the variance in the pulse height at 662 keV from events near the bottom of the 25 crystal compared to those near the top of the crystal could be reduced to <1%. This paper describes the 26 design and engineering of our detector package in order to improve energy resolution of 1 in3-scale 27 SrI2(Eu) crystals.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗