Search NASA⌕ Search

SEARCH · Search NASA

Results for “Explanability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Ultrasonic Attenuation Due to Grain Boundary Scattering in Pure Niobium

Experimental confirmation of various grain scattering theories exist but there are still outstanding questions concerning the characterization of microstructure using ultrasound. In this study, high purity niobium serves as a model material devoid of extrinsic scattering centers (e.g., voids, precipitates, second phase particles etc.) A range of microstructures were obtained by annealing in ultrahigh vacuum at different temperatures (600–800°C) after routine cold-rolling and recrystallization heat treatment. Ultrasonic attenuation is measured as a function of a frequency for each sample. For the samples with an intermediate grain size (typically ∼50 μm), attenuation follows a power law dependence on frequency with an exponent of n∼1.6, which is close to the prediction, n=2, of classical Stochastic scattering theory. However, quantitative comparison shows that the observed attenuation is higher than predicted by the classical theory. The Stanke-Kino unified grain scattering theory may provide an explanation for the lower frequency dependence than traditional theories predict, though it still under predicts the magnitude of the attenuation. In any event, the resulting empirical relations provide a useful approach for practical grain size measurement with an acceptable level of uncertainty. The effect of a layered microstructure typical of some sheets/plates is discussed.

36 MATERIALS SCIENCE↗

Phase-Slip Phenomena in Proximitized NbN/NiCu Superconducting Nanostripes

Ultrathin superconducting/ferromagnet (S/F) nanostripes are very interesting systems to investigate both the physics involved on nanoscale size and as light sensitive elements for superconducting single photon detectors. The electrical transport properties of NbN(8 nm)/NiCu(10 nm) nanostripes are presented down to a temperature of 4.2 K. A number of voltage steps were observed on the current-voltage characteristics, and they were investigated at different temperatures. A possible explanation in terms of active phase-slip phenomena has been proposed on the basis of the time-dependent Ginzburg-Landau theory, leading to an estimation of the inelastic electron-phonon relaxation time around 0.8 ps. The latter value was found to be in good agreement with a relaxation time, independently measured by femtosecond transient optical reflectivity experiments performed on the same bilayer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Published Tunneling Results of Binnig et al Interpreted as Related to Surface Superconductivity in SrTiO{sub 3}

In 1980, Binnig et al. reported tunneling measurements on Nb-doped SrTiO{sub 3}, and interpreted their results as indicating two-band superconductivity in the bulk of SrTiO{sub 3}. However, (1) effective masses determined from tunneling results in the normal state by Sroubek in 1969 and 1970 are much smaller than those determined by most other methods. The much smaller masses were attributed to properties of a surface layer by the present author in 1971. (2) The only other reports of two-band superconductivity in bulk SrTiO{sub 3} can be used to infer much smaller values for the band separations than found by Binnig et al. In this paper, we give an alternative explanation of the results of Binnig et al. in terms of superconductivity in a surface layer. We obtain fair fits to the band gaps versus Fermi energy for the two bands in the three samples where two surface subbands are occupied and to the temperature dependence of the gaps in one crystal, using a model with three adjustable interaction parameters, an adjustable energy for the phonons which dominate the pairing, and an adjustable ratio of the mean-field T{sub c} to the actual T{sub c}. We show results for a combined fit to the low-temperature band gaps and to the T-dependence in one crystal. The phonon energy which gives the best fit is 21 meV. This is probably an appropriate average over the three longitudinal polar modes and acoustic modes in the material. A large value of about two is found for the ratio T{sub cmf}/T{sub c}, and we conjecture that this arises because a band with a small Fermi energy, not seen in the tunneling results, plays a part in increasing T{sub cmf}/T{sub c}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hysteresis Effects on a Non-uniform Transmission Line with Induced Quantum Mechanical Atomic Transitions

This study describes the effect of hysteresis on the generation of the higher harmonics in the line voltage and current in a non-uniform transmission line when we include a quadratic non-linear term having memory to account for the hysteresis effect in the inductance part of line. The simulational analysis using MATLAB is presented which works with a non-uniform line having hysteresis. These simulations are based on a theoretical spatial Fourier analysis combined with perturbation theory which is used without bothering about source and load. The line differential equations are solved approximately in the space- time-frequency domain using perturbation theory and the numerical computations have been carried out for the voltage and current amplitude characteristics. In Appendix 1, some theoretical explanations that support our non-linear memory-based hysteresis model based on Landau’s equation of precession of a magnetic moment in a magnetic field are included. This paper also includes a brief derivation of atomic transition probability produced by e-m radiation from the transmission line falling on an atom in the far field zone. This calculation enables us to derive maximum likelihood estimation(MLE) of the hysteresis parameters by measuring which atomic transitions have occurred.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Seebeck Coefficient Measurement and Its Narrow Band Model Interpretation in FeTe{sub 0.5}Se{sub 0.5} Superconductor

We have measured Seebeck coefficient (S) of FeTe{sub 0.5}Se{sub 0.5} superconducting sample from 10 to 300 K. The variation of Seebeck coefficient with temperature of this system was found to be very anomalous, and the overall experimental observation of the S(T) was studied in the outline of a narrow-band model. In high-temperature region, the Seebeck coefficient is almost independent of temperature. Further, from the study of high-temperature magnitude of S, sample undergoes a change in sign in the Seebeck coefficient, wherein, appearance of a negative peak around 22 K and subsequently, its Seebeck coefficient goes to zero in the superconducting transition temperature regime around 11 to 13 K. It is revealed that the bandwidth and a small asymmetry involved in narrow bands give a realistic explanation to the anomalous temperature dependence of Seebeck coefficient of FeTe{sub 0.5}Se{sub 0.5} system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of Oxygen Vacancy on the Magnetic Properties of Ni-Doped SnO{sub 2} Nanoparticles

We studied the ferromagnetism of Ni-doped SnO{sub 2} with and without oxygen vacancy (V{sub O}) by experiments and calculations. Sn{sub 0.96}Ni{sub 0.04}O{sub 2} nanocrystalline powder prepared by the sol-gel method exhibits room-temperature ferromagnetism, and the vacuum annealing reduces its saturation magnetizations. The density functional theory (DFT) calculations show that the doped Ni atom can introduce a local magnetic moment of about 2.0 μ{sub B} in SnO{sub 2} (110) surface, which is ascribed to the spin-polarization of Ni 3d and O 2p electrons. The type of preferential magnetic coupling of Ni-doped SnO{sub 2} (110) surface depends upon the distributions of Ni dopants, and ferromagnetic coupling is more favorable in most cases. Introduction of V{sub O} obviously weakens the ferromagnetic interaction of Ni-doped SnO{sub 2} (110) surface, which can give a reasonable explanation for our experimental observations.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Entropy-driven structure and dynamics in carbon nanocrystallites

New carbon composite materials are being developed that contain carbon nanocrystallites in the range of 5 17 A in radius dispersed within an amorphous carbon matrix. Evaluating the applicability of these materials for use in battery electrodes requires a molecular-level understanding of the thermodynamic, structural, and dynamic properties of the nanocrystallites. Herein, molecular dynamics simulations reveal the molecular-level mechanisms for such experimental observations as the increased spacing between carbon planes in nanocrystallites as a function of decreasing crystallite size. As the width of this spacing impacts Li-ion capacity, an explanation of the origin of this distance is relevant to understanding anode performance. It is thus shown that the structural configuration of these crystallites is a function of entropy. The magnitude of out-of-plane ripples, binding energy between layers, and frequency of characteristic planar modes are reported over a range of nanocrystallite sizes and temperatures. This fundamental information for layered carbon nanocrystallites may be used to explain enhanced lithium ion diffusion within the carbon composites.

Nanocrystallite Carbon↗

Unbiased Resource Evaluations with Kriging and Stochastic Models of Heterogeneous Rock Properties

This paper revisits the computation of product combinations for quantification of resources (e.g., pore volume for hydrocarbon reservoir formations). The explanations have been simplified by considering the exhaustive numerical model for properties that are multiplied first and then added or averaged for evaluation. The analysis starts without any probabilistic considerations. Abbreviated (up-scaled) computations in the sum of multiplications are proposed by substituting the individual values by averages for each rock property in the coarser cell resolution model. A result found is that averaged properties can be utilized for estimation at non-sampled locations, instead of individual values; however, covariances and cumulants must also be included in the abbreviated computations. The smoothing effect of kriging is found to be irrelevant if the kriging variance is also included in the up-scaled abbreviated pore volume computations. Thus, the equivalence between computation of resource volumes from kriging estimates and conditional stochastic simulations is established, with the condition that numerical estimation must incorporate the complete covariance and cumulant information as well. An example shows pore volume prediction from a kriging model matches the unbiased result from stochastic simulations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Offshore application of landslide susceptibility mapping using gradient-boosted decision trees: a Gulf of Mexico case study

Abstract Among natural hazards occurring offshore, submarine landslides pose a significant risk to offshore infrastructure installations attached to the seafloor. With the offshore being important for current and future energy production, there is a need to anticipate where future landslide events are likely to occur to support planning and development projects. Using the northern Gulf of Mexico (GoM) as a case study, this paper performs Landslide Susceptibility Mapping (LSM) using a gradient-boosted decision tree (GBDT) model to characterize the spatial patterns of submarine landslide probability over the United States Exclusive Economic Zone (EEZ) where water depths are greater than 120 m. With known spatial extents of historic submarine landslides and a Geographic Information System (GIS) database of known topographical, geomorphological, geological, and geochemical factors, the resulting model was capable of accurately forecasting potential locations of sediment instability. Results of a permutation modelling approach indicated that LSM accuracy is sensitive to the number of unique training locations with model accuracy becoming more stable as the number of training regions was increased. The influence that each input feature had on predicting landslide susceptibility was evaluated using the SHapely Additive exPlanations (SHAP) feature attribution method. Areas of high and very high susceptibility were associated with steep terrain including salt basins and escarpments. This case study serves as an initial assessment of the machine learning (ML) capabilities for producing accurate submarine landslide susceptibility maps given the current state of available natural hazard-related datasets and conveys both successes and limitations.

Dyer, Alec S. (ORCID:0000000219813904)↗

Effects of light polarization in photonic nanojet

Illumination plays a key role in getting high resolution imaging. Photonic nanojet is a new lighting system. Since the transverse beam width of the nanojet can reach λ/3, photonic nanojet is usually considered to be the key point for the explanation of the high-resolution microsphere assisted microscopy. However, the polarization of photonic nanojet are usually out of attention. In this work, we investigate the photonic nanojets formed by illuminating a dielectric microcylinder by two plane waves with different linear polarizations. The influences of wavelength and refractive index contrast between the microcylinder and its surrounding, and the cases illuminated by the Gaussian beam are also studied. Numerical results demonstrate that the TM polarization can generate a wider nanojet waist than the TE polarization, and this is produced by the longitudinal component of the TM-polarization illumination. When the Gaussian beam width becomes larger than diameter of the cylinder, the nanojet waists become smaller than that obtained by the cylinder under a plane wave. At last, the reason why the TE polarization has a thinner nanojet waist is given, it is related to the longitudinal component making light transmission far away from optical axis.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Role of oxygen concentrations on structural and optical properties of RF magnetron sputtered ZnO thin films

We report an investigation on the effect of oxygen flow rate on the structural and optical properties of zinc oxide thin films prepared by RF magnetron sputtering. The structural measurements were carried using grazing incidence X-ray diffraction, atomic force microscopy and Raman spectroscopy. The role of oxygen partial pressure on the crystallinity, the surface morphology and vibrational modes has been established. The optical properties of the films were investigated using FR-Basic-VIS/NIR fitted with FR-Monitor software for film thickness, refractive index and color determination. The film thickness is observed to increase when oxygen is introduced at 4 sccm but eventual decrease with increase in the flow rate an indication of initial increase in rate of deposition followed by reduction. Elaborate explanations of these trends are provided.

36 MATERIALS SCIENCE↗

Chiral guest in a chiral framework: X-ray diffraction study

The inclusion compound of zinc lactate terephthalate with R-butan-2-ol, [Zn{sub 2}(R-Bu{sup s}OH) (bdc)(S-lac)]•(R-Bu{sup s}OH) (Bu{sup s}OH is butan-2-ol, H{sub 2}bdc is terephthalic acid, S-H{sub 2}lac is lactic acid), was prepared by soaking crystals of [Zn{sub 2}(dmf)(bdc)(S-lac)]•DMF in pure R-butan-2-ol. The positions of chiral alcohol molecules in voids of the chiral framework and the host–guest contacts were determined by X-ray diffraction. These data provide an explanation for the origin of chiral discrimination of zinc lactate terephthalate toward the R-isomer of butan-2-ol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Composite Pseudoclassical Models of Quarks

Composite models of quarks are proposed, analogous to composite models of leptons. A model-based explanation of the appearance of generations of fundamental particles in the Standard Model is given. New empirical formulas are proposed for the quark masses, modifying Barut’s well-known formula.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Does the Excited Cluster {sup 14}N{sup *} Exist in the {sup 15}O Nucleus?

On the basis of the modified potential two-cluster model with forbidden state which effectively take the Pauli principle into account, calculations have been performed of the astrophysical S-factor of radiative p{sup 14}N capture to the ground state of the {sup 15}O nucleus at proton energies up to 5 MeV in the center-of-mass system (c.m.s.) with allowance for wide resonances up to 3.4 MeV in the c.m.s. For an acceptable explanation of the available experimental data it is necessary to allow the existence of the {sup 14}N cluster in the excited state {sup 14}N{sup *} at an excitation energy of 5.69 MeV and angular momentum J{sup π} = 1{sup –}. It is assumed that in such a case it is possible to use the wave function of the {sup 4}D{sub 1/2} state with respect to the relative motion of the p{sup 14}N{sup *} clusters. It is also shown that a description of the S-factor of p{sup 14}N capture in the resonance region is possible only under the assumption that all of the low-lying resonances at 260(1/2{sup +}), 987(3/2{sup +}), 1447(1/2{sup +}), 2187(3/2{sup +}), and 3211(3/2{sup +}) keV in the c.m.s. are {sup 4}D{sub 1/2} and {sup 4}D{sub 3/2} scattering waves.

74 ATOMIC AND MOLECULAR PHYSICS↗

Effect of Network Structure on Characterization and Flow Modeling Using X-ray Micro-Tomography Images of Granular and Fibrous Porous Media

Image-based network modeling has become a powerful tool for modeling transport in real materials that have been imaged using X-ray computed micro-tomography (XCT) or other three-dimensional imaging techniques. Network generation is an essential part of image-based network modeling, but little quantitative work has been done to understand the influence of different network structures on modeling. We use XCT images of three different porous materials (disordered packings of spheres, sand, and cylinders) to create a series of four networks for each material. Despite originating from the same data, the networks can be made to vary over two orders of magnitude in pore density, which in turn affects network properties such as pore-size distribution and pore connectivity. Despite the orders-of-magnitude difference in pore density, single-phase permeability predictions remain remarkably consistent for a given material, even for the simplest throat conductance formulas. Detailed explanations for this beneficial attribute are given in the article; in general, it is a consequence of using physically representative network models. The capillary pressure curve generated from quasi-static drainage is more sensitive to network structure than permeability. However, using the capillary pressure curve to extract pore-size distributions gives reasonably consistent results even though the networks vary significantly. These results provide encouraging evidence that robust network modeling algorithms are not overly sensitive to the specific structure of the underlying physically representative network, which is important given the variety image-based network-generation strategies that have been developed in recent years.

42 ENGINEERING↗

High Speed Impact Testing of UHMWPE Composite Using Orthogonal Arrays

Abstract Background Ultra high molecular weight polyethylene composites are fiber based composites used in armor applications. While some characterization has been conducted experimentally, this study varies multiple parameters simultaneously to investigate material response under a wide range of conditions. Objective This work focuses on characterizing the response of Dyneema ® HB26 hard laminate composites under high-speed impacts to examine the influence of plate diameter, clamping pressure, and plate spacing on target performance. Additionally, micro Computer Tomography scans are used to nondestructively evaluate the damage evolution in the targets. Methods These scan results are used in concert with more traditional armor performance metrics to evaluate the effect of various parameters using the method of orthogonal array analysis. This technique allows for multiple variables to be investigated in the same test series, saving time and budget while still providing quality results across a range of variables and variable values. Results We conclude that of the parameters investigated, the plate spacing parameter has the largest effect on performance, followed by the plate diameter. Bolt torque was found to not have a significant impact on results, indicating that an edge clamping pressure is not critical to material response. Additionally, by examining the high resolution scans, we can quantify the damage with an effective damage angle and that this angle is a good predictor of performance. Conclusion Finally a damage theory involving the effective bending strength of the plates is discussed as an explanation for all of the results observed in this test series.

Hannah, T. (ORCID:0000000230261362)↗