Search NASA⌕ Search

SEARCH · Search NASA

Results for “Hydrogen Development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Plasma-free hydrogenation of oxygen-terminated polycrystalline diamond as determined by circular transmission line measurements (CTLM)

Here, we developed a process to fully hydrogen-terminate diamond by annealing in forming gas. The surface was characterized using circular transmission line measurements (CTLMs) to evaluate the onset and degree of hydrogen termination. No hydrogenation occurred at temperatures at or below 500 °C. Hydrogenation occurs after annealing for 5 min at temperatures between 600 and 1000 °C, with complete hydrogenation achieved at 1000 °C, which showed the same sheet resistance as diamond terminated in a hydrogen plasma. Annealing at temperatures lower than 1000 °C resulted in only partial hydrogenation but can be compensated by increasing the anneal time. At temperatures exceeding 1100 °C, the sheet resistance suddenly and drastically increases, indicating instability of a hydrogen-terminated diamond surface at elevated temperatures under forming gas. The activation energy was determined to be 1.20eV. SEM inspection showed that annealing in hydrogen produced significantly reduced surface roughness compared to diamond surfaces hydrogenated in a H 2 plasma.

36 MATERIALS SCIENCE↗

Water Gas Shift Reaction with A Single Stage Low Temperature Membrane Reactor

Palladium membrane and palladium membrane reactor were developed under this project for hydrogen separation and purification for fuel cell applications. A full-scale membrane reactor was designed, constructed and evaluated for the reformate produced from a commercial scale methanol reformer. In addition, the Pd membrane and module developed from this project was successfully evaluated in the field for hydrogen purification for commercial fuel cell applications.

08 HYDROGEN↗

Controlled Hydrogen Fleet and Infrastructure Demonstration Project

This program was undertaken in response to the US Department of Energy Solicitation DE-PS30-03GO93010, resulting in this Cooperative Agreement with the Ford Motor Company and BP to demonstrate and evaluate hydrogen fuel cell vehicles and required fueling infrastructure. Ford initially placed 18 hydrogen fuel cell vehicles (FCV) in three geographic regions of the US (Sacramento, CA; Orlando, FL; and southeast Michigan). Subsequently, 8 advanced technology vehicles were developed and evaluated by the Ford engineering team in Michigan. BP is Ford's principal partner and co-applicant on this project and provided the hydrogen infrastructure to support the fuel cell vehicles. BP ultimately provided three new fueling stations. The Ford-BP program consists of two overlapping phases. The deliverables of this project, combined with those of other industry consortia, are to be used to provide critical input to hydrogen economy commercialization decisions by 2015. The program's goal is to support industry efforts of the US President's Hydrogen Fuel Initiative in developing a path to a hydrogen economy. This program was designed to seek complete systems solutions to address hydrogen infrastructure and vehicle development, and possible synergies between hydrogen fuel electricity generation and transportation applications. This project, in support of that national goal, was designed to gain real world experience with Hydrogen powered Fuel Cell Vehicles (H2FCV) 'on the road' used in everyday activities, and further, to begin the development of the required supporting H2 infrastructure. Implementation of a new hydrogen vehicle technology is, as expected, complex because of the need for parallel introduction of a viable, available fuel delivery system and sufficient numbers of vehicles to buy fuel to justify expansion of the fueling infrastructure. Viability of the fuel structure means widespread, affordable hydrogen which can return a reasonable profit to the fuel provider, while viability of the vehicle requires an expected level of cost, comfort, safety and operation, especially driving range, that consumers require. This presents a classic 'chicken and egg' problem, which Ford believes can be solved with thoughtful implementation plans. The eighteen Ford Focus FCV vehicles that were operated for this demonstration project provided the desired real world experience. Some things worked better than expected. Most notable was the robustness and life of the fuel cell. This is thought to be the result of the full hybrid configuration of the drive system where the battery helps to overcome the performance reduction associated with time related fuel cell degradation. In addition, customer satisfaction surveys indicated that people like the cars and the concept and operated them with little hesitation. Although the demonstrated range of the cars was near 200 miles, operators felt constrained because of the lack of a number of conveniently located fueling stations. Overcoming this major concern requires overcoming a key roadblock, fuel storage, in a manner that permits sufficient quantity of fuel without sacrificing passenger or cargo capability. Fueling infrastructure, on the other hand, has been problematic. Only three of a planned seven stations were opened. The difficulty in obtaining public approval and local government support for hydrogen fuel, based largely on the fear of hydrogen that grew from past disasters and atomic weaponry, has inhibited progress and presents a major roadblock to implementation. In addition the cost of hydrogen production, in any of the methodologies used in this program, does not show a rapid reduction to commercially viable rates. On the positive side of this issue was the demonstrated safety of the fueling station, equipment and process. In the Ford program, there were no reported safety incidents.

08 HYDROGEN↗

In Situ Multinuclear NMR Spectroscopic Studies of the Thermal Decomposition of Ammonia Borane in Solution

The development of condensed phase hydrogen storage materials for fuel cell powered vehicles capable of meeting the 2015 system target goals of >82 g H2 L-1 volumetric density and >90 g H2 kg-1 gravimetric density has attracted recent interest. The details of the mechanisms for hydrogen release from AB are not completely understood; however, significant progress has been made in furthering our understanding of these mechanisms. This work was funded by the Office of Energy Efficiency and Renewable Energy, U.S. Department of Energy (DOE) as part of the Chemical Hydrogen Storage Center and carried out at the Pacific Northwest National Laboratory (operated by Battelle for DOE).

08 HYDROGEN↗

Reduction Kinetics of Perovskite Oxides for Selective Hydrogen Combustion in the Context of Olefin Production

Chemical looping represents a novel approach for generating light olefins in which thermal cracking or catalytic dehydrogenation is coupled with selective hydrogen combustion (SHC) by a metal oxide redox catalyst, which enables autothermal operation, increased per-pass conversion, and greater-than-equilibrium yields. Recent studies indicate that Na 2 WO 4 -promoted perovskite oxides are effective redox catalysts with high olefin selectivity. Herein, kinetic parameters, rates, and reaction models for the reduction of unpromoted and Na 2 WO 4 -promoted CaMnO 3 redox catalysts by H 2 , C 2 H 4 , and C 2 H 6 , is reported. Reduction rates of CaMnO 3 under ethylene and ethane are significantly lower than under H 2 . Additionally, model fitting of reduction kinetics show good agreement with reaction order–controlled models for CaMnO 3 reduction and predict greater oxygen site dependence and higher activation energy for CaMnO 3 reduction by C 2 H 4 as compared with H 2 . Avrami–Erofe'ev nucleation and growth models provide the best fit to the reduction of Na 2 WO 4 /CaMnO 3 in H 2 and in C 2 H 4 . After Na 2 WO 4 promotion, the reduction rate of CaMnO 3 is three orders of magnitude lower in ethylene in comparison to hydrogen, consistent with its superior selectivity to hydrogen combustion. The models developed can be applied toward reactor design and optimization in the context of enhanced olefin production via SHC under a cyclic redox scheme.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anisotropic storage medium development in a full-scale, sodium alanate-based, hydrogen storage system

Deuterium desorption in an automotive-scale hydrogen storage tube was studied in-situ using neutron diffraction. Gradients in the concentration of the various alanate phases were observed along the length of the tube but no significant radial anisotropy was present. In addition, neutron radiography and computed tomography showed large scale cracks and density fluctuations, confirming the presence of these structures in an undisturbed storage system. These results demonstrate that large scale storage structures are not uniform even after many absorption/desorption cycles and that movement of gaseous hydrogen cannot be properly modeled by a simple porous bed model. In addition, the evidence indicates that there is slow transformation of species at one end of the tube indicating loss of catalyst functionality. These observations explain the unusually fast movement of hydrogen in a full scale system and shows that loss of capacity is not occurring uniformly in this type of hydrogen-storage system.

08 HYDROGEN↗

Recent advances in CO 2 hydrogenation to value-added products — Current challenges and future directions

Climate change, global warming, fossil fuel depletion and rising fuel prices have created great incentives to seek alternative fuel production technologies. CO 2 transformation to value-added products using renewable H 2 has proven to be an emerging solution to enable this goal. In this regard, three different promising processes, namely methane, methanol and hydrocarbon synthesis via CO 2 hydrogenation are thoroughly discussed. In addition, the influential factors affecting process efficiencies such as catalyst design and mechanistic insight, operating conditions as well as reactor types are investigated, with key pathways that dictate catalyst activity and selectivity of the most promising materials described. Furthermore, a brief overview of the reactor configuration and its crucial role in the improving process viability is analyzed. Accordingly, fixed-bed, fluidized-bed, annular and spherical reactors along with H 2 O/H 2 perm-selective membrane reactors are disscussed for hydrocarbon production. In addition, different reactor configurations are compared to assess the best one that is adjustable depending on the reaction mechanism. In conclusion, a corrugated-wall dual-type membrane reactor is proposed as an emerging alternative for CO 2 hydrogenation to value-added products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of the Transferable Potentials for Phase Equilibria Model for Hydrogen Sulfide

The transferable potentials for phase equilibria force field is extended to hydrogen sulfide. The pure-component and binary vapor–liquid equilibria with methane and carbon dioxide and the liquid-phase relative permittivity are used for the parameterization of the Lennard-Jones (LJ) and Coulomb interactions, and models with three and four interaction sites are considered. For the three-site models, partial point charges are placed on the sites representing the three atoms, while the negative partial charge is moved to an off-atom site for the four-site models. The effect of molecular shape is probed using either only a single LJ interaction site on the sulfur atom or adding also sites on the hydrogen atoms. This procedure results in four distinct models but only those with three LJ sites can accurately reproduce all properties considered for the parameterization. These two are further assessed for predictions of the liquid-phase structure, the lattice parameters and relative permittivity for the face-centered-cubic solid, and the triple point. An effective balance between LJ interactions and the dipolar and quadrupolar terms of the first-order electrostatic interactions is struck in order to obtain a four-site model that describes the condensed-phase properties and the phase equilibria with high accuracy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A bond-order potential for the Al–Cu–H ternary system

Al-Based Al–Cu alloys have a very high strength to density ratio, and are therefore important materials for transportation systems including vehicles and aircrafts. These alloys also appear to have a high resistance to hydrogen embrittlement, and as a result, are being explored for hydrogen related applications. To enable fundamental studies of mechanical behavior of Al–Cu alloys under hydrogen environments, we have developed an Al–Cu–H bond-order potential according to the formalism implemented in the molecular dynamics code LAMMPS. Our potential not only fits well to properties of a variety of elemental and compound configurations (with coordination varying from 1 to 12) including small clusters, bulk lattices, defects, and surfaces, but also passes stringent molecular dynamics simulation tests that sample chaotic configurations. Careful studies verified that this Al–Cu–H potential predicts structural property trends close to experimental results and quantum-mechanical calculations; in addition, it properly captures Al–Cu, Al–H, and Cu–H phase diagrams and enables simulations of H 2 dissociation, chemisorption, and absorption on Al–Cu surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Note: Development of ESS Bilbao's proton ion source: Ion Source Hydrogen Positive

The Ion Source Hydrogen positive is a 2.7 GHz off-resonance microwave discharge ion source. It uses four coils to generate an axial magnetic field in the plasma chamber around 0.1 T that exceeds the ECR resonance field. A new magnetic system was designed as a combination of the four coils and soft iron in order to increase the reliability of the source. The description of the simulations of the magnetic field and the comparison with the magnetic measurements are presented. Moreover, results of the initial commissioning of the source for extraction voltage until 50 kV will be reported.

43 PARTICLE ACCELERATORS↗

Environmental risks and opportunities of orphaned oil and gas wells in the United States

Abstract Hundreds of thousands of documented and undocumented orphaned oil and gas wells exist in the United States (U.S.). These wells have the potential to contaminate water supplies, degrade ecosystems, and emit methane and other air pollutants. Thus, orphaned wells present risks to climate stability and to environmental and human health, which can be reduced by plugging. To quantify environmental risks and opportunities of well plugging at the national level, we analyze data on 81 857 documented orphaned wells across the U.S. We find that > 4.6 million people live within 1 km of a documented orphaned well. 35% of the documented orphaned wells are located within 1 km of a domestic groundwater well, yet only 8% of the wells have groundwater quality data within a 1 km radius. Methane emissions from the documented orphaned wells represent approximately 3%–6% of total U.S. methane emissions from abandoned oil and gas wells, but this estimate is based on measurements at < 0.03% of U.S. abandoned wells. 91% of the documented orphaned wells overlie formations favorable for geologic storage of carbon dioxide and hydrogen, meaning that orphaned well plugging can reduce leakage risks from future storage projects. Finally, we estimate plugging costs for documented orphaned wells to exceed the $4.7 billion federal funding by 30%–80%, emphasizing the importance of prioritizing federal spending on wells with large remediation benefits. Overall, environmental monitoring data are not extensive enough to quantify risks, especially those related to air and water quality and human health. Plugging orphaned wells can provide opportunities for geologic storage of carbon dioxide and hydrogen and geothermal energy development, thereby facilitating efforts to transition to net-zero energy systems. Our analysis on environmental risks and opportunities of orphaned wells provides a framework that can be used to manage the millions of documented and undocumented orphaned wells in the U.S. and abroad.

54 ENVIRONMENTAL SCIENCES↗

2022 roadmap on 3D printing for energy

The energy transition is one of the main challenges of our society and therefore a major driver for the scientific community. To ensure a smart transition to a sustainable future energy scenario different technologies such as energy harvesting using solar cells or windmills and chemical storage in batteries, super-capacitors or hydrogen have to be developed and ultimately deployed. New fabrication approaches based on additive manufacturing and the digitalization of the industrial processes increase the potential to achieve highly efficient and smart technologies required to increase the competitiveness of clean energy technologies against fossil fuels. In this frame, the present roadmap highlights the tremendous potential of 3D printing as a new route to fully automate the manufacturing of energy devices designed as digital files. Additionally, this article gives numerous guidelines to maximize the performance and efficiency of the next generation of 3D printed devices for the energy transition while reducing the waste of critical raw materials. In particular, the paper is focused on the current status, present challenges and the expected and required advances of 3D printing for the fabrication of the most relevant energy technologies such as fuel cells and electrolysers, batteries, solar cells, super-capacitors, thermoelectric generators, chemical reactors and turbomachinery.

36 MATERIALS SCIENCE↗

BlendPATH (Blending Pipeline Analysis Tool for Hydrogen) [SWR-24-10]

BlendPATH provides case-by-case techno-economic analysis for potential projects where hydrogen is blended into a natural gas transmission pipeline. BlendPATH estimates 1) the transmission pipeline modifications and operating conditions necessary to blend hydrogen to a user specified volume faction of hydrogen in pipeline gas and 2) the incremental capital and operating expenses to prepare said transmission pipeline for hydrogen blending. BlendPATH is developed in Python and requires SAInt, a underlying commercial natural gas pipeline network modeling software, to run. Pipeline modification and operation condition estimation is guided by ASME B31.12. The intent of this software is to target application for projects in the initial project assessment stage and provide the user with the capability of assess promising opportunities before the use proceeds with further detailed pipeline evaluation based on a probable economic outcome.

Kee, Jamie↗

Temporarily alloying titanium to facilitate friction stir welding

While historically hydrogen has been considered an impurity in titanium, when used as a temporary alloying agent it promotes beneficial changes to material properties that increase the hot-workability of the metal. This technique known as thermohydrogen processing was used to temporarily alloy hydrogen with commercially pure titanium sheet as a means of facilitating the friction stir welding process. Specific alloying parameters were developed to increase the overall hydrogen content of the titanium sheet ranging from commercially pure to 30 atomic percent. Each sheet was evaluated to determine the effect of the hydrogen content on process loads and tool deformation during the plunge phase of the friction stir welding process. Two materials, H-13 tool steel and pure tungsten, were used to fabricate friction stir welding tools that were plunged into each of the thermohydrogen processed titanium sheets. Tool wear was characterized and variations in machine loads were quantified for each tool material and weld metal combination. Thermohydrogen processing was shown to beneficially lower plunge forces and stabilize machine torques at specific hydrogen concentrations. The resulting effects of hydrogen addition to titanium metal undergoing the friction stir welding process are compared with modifications in titanium properties documented in modern literature. Such comparative analysis is used to explain the variance in resulting process loads as a function of the initial hydrogen concentration of the titanium.

08 HYDROGEN↗

USD Catalysis Group for Alternative Energy

The South Dakota Catalysis Group (SDCG) is a collaborative project with mission to develop advanced catalysts for energy conversion with two primary goals: (1) develop photocatalytic systems in which polyfunctionalized TiO2 are the basis for hydrogen/oxygen synthesis from water and sunlight (solar fuels group), (2) develop new materials for hydrogen utilization in fuel cells (fuel cell group). In tandem, these technologies complete a closed chemical cycle with zero emissions.

14 SOLAR ENERGY↗

Hydrogen-filled RF Cavities for Muon Beam Cooling

Ionization cooling requires low-Z energy absorbers immersed in a strong magnetic field and high-gradient, large-aperture RF cavities to be able to cool a muon beam as quickly as the short muon lifetime requires. RF cavities that operate in vacuum are vulnerable to dark-current- generated breakdown, which is exacerbated by strong magnetic fields, and they require extra safety windows that degrade cooling, to separate RF regions from hydrogen energy absorbers. RF cavities pressurized with dense hydrogen gas will be developed that use the same gas volume to provide the energy absorber and the RF acceleration needed for ionization cooling. The breakdown suppression by the dense gas will allow the cavities to operate in strong magnetic fields. Measurements of the operation of such a cavity will be made as functions of external magnetic field and charged particle beam intensity and compared with models to understand the characteristics of this technology and to develop mitigating strategies if necessary.

43 PARTICLE ACCELERATORS↗

Systems Analysis Sub site

Systems analysis provides direction, focus, and support for the development and introduction of hydrogen production, storage, and end-use technologies, and provides a basis for recommendations on a balanced portfolio of activities.

systems analysis risk benefit hydrogen technologie↗

Determination of the Kinematics of the Qweak Experiment and Investigation of an Atomic Hydrogen Moller Polarimeter

The Q weak experiment has tested the Standard Model through making a precise measurement of the weak charge of the proton ($Q^p_W$). This was done through measuring the parity-violating asymmetry for polarized electrons scattering off of unpolarized protons. The parity-violating asymmetry measured is directly proportional to the four-momentum transfer ($Q^2$) from the electron to the proton. The extraction of $Q^p_W$ from the measured asymmetry requires a precise $Q^2$ determination. The Q weak experiment had a $Q^2$ = 24.8 ± 0.1 m(GeV 2 ) which achieved the goal of an uncertainty of <= 0.5%. From the measured asymmetry and $Q^2$, $Q^p_W$ was determined to be 0.0719 ± 0.0045, which is in good agreement with the Standard Model prediction. This puts a 7.5 TeV lower limit on possible "new physics". This dissertation describes the analysis of Q^2 for the Q weak experiment. Future parity-violating electron scattering experiments similar to the Q weak experiment will measure asymmetries to high precision in order to test the Standard Model. These measurements will require the beam polarization to be measured to sub-0.5% precision. Presently the electron beam polarization is measured through Moller scattering off of a ferromagnetic foil or through using Compton scattering, both of which can have issues reaching this precision. A novel Atomic Hydrogen Moller Polarimeter has been proposed as a non-invasive way to measure the polarization of an electron beam via Moller scattering off of polarized monatomic hydrogen gas. This dissertation describes the development and initial analysis of a Monte Carlo simulation of an Atomic Hydrogen Moller Polarimeter.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗