Search NASA⌕ Search

SEARCH · Search NASA

Results for “Instability waves”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

On the inviscid acoustic-mode instability of supersonic shear flows. I - Two-dimensional waves

The same previously utilized methods to study acoustic-mode instability in supersonic boundary layers are applied to free shear layers, and new calculations are derived for boundary layers with cooling and suction. The linear inviscid stability theory is employed to calculate spatial amplification rates at Mach 3 for the sinuous and varicose modes of a single wake flow and a single jet flow, each made up of the same mixing-layer profile plus a central region of uniform flow. It is shown that along with sequences of sinuous and varicose unstable modes clearly identifiable as acoustic modes, both of these flows, unlike the boundary layer, have a lowest sinuous mode that is the most unstable.

Mack, Leslie M.↗

Generation of large scale field-aligned density irregularities in ionospheric heating experiments

Threshold and growth rate for stimulated Brillouin scattering are calculated for a uniform magnetoplasma. These are then compared with the threshold and growth rate of a new thermal instability in which the nonlinear Lorentz force felt by the electrons at the beat frequency of the two electromagnetic waves is replaced by a pressure force due to differential heating in the interference pattern of the pump wave and the generated electromagnetic wave. This thermal instability, which is still essentially stimulated Brillouin scattering, has a threshold which is especially low when the propagation vector of the beat wave is almost normal to the magnetic field. The threshold is then considerably lower than the threshold for normal stimulated Brillouin scattering and therefore this new instability is probably responsible for the generation of large scale field aligned irregularities and ionospheric spread F.

Fejer, J. A.↗

On the existence of Weibel instability in a magnetized plasma. II. Perpendicular wave propagation: The ordinary mode

In a magnetized plasma with a temperature anisotropy T{sub ||}>T{sub Up-Tack} (where || and Up-Tack denote directions with respect to the uniform magnetic field B{sub 0}), the nonresonant Weibel instability can develop and destabilize purely growing, ordinary plasma modes (k=k{sub Up-Tack }). This paper presents a rigorous extended analysis of this instability on the basis of a new threshold b{sub 0}(k), which enables to determine the instability conditions as well as the upper limits of the growth rates. Accurate analytical forms of the threshold conditions are provided here for the first time and for the full physical range of the temperature anisotropy and the parallel plasma beta. The marginal and threshold conditions for the plasma parameters, which directly lead to an instability of the ordinary mode, are explicitly derived numerically and analytically. The new analytical tools developed here provide premises for a comprehensive investigation of the interplay of this instability with the firehose instability, as they both can develop in the same conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Shock tube experiments on the three-layer Richtmyer–Meshkov instability

Here, a vertical shock tube is used for experiments on the three-layer Richtmyer–Meshkov instability. Two closely spaced membrane-less interfaces are formed by the flow of two different sects of three gases: one with air above CO 2 above SF 6 and the other with helium above air above SF 6 . The lightest of the three gases enters the shock tube at the top of the driven section and flows downward. Conversely, the heaviest gas enters at the bottom of the shock tube and flows upward while the intermediate density gas enters at the middle through porous plates. All three gases are allowed to escape through holes at the layer location, leaving an approximately 30-mm layer of intermediate-density gas suspended between the lightest gas from above and the heaviest gas from below. A single-mode, two-dimensional initial perturbation is then imposed on the lower interface by oscillating the shock tube in the horizontal direction. The flow is visualized by seeding the intermediate gas with particles and illuminating it with a pulsed laser. Image sequences are then captured using high-speed video cameras. Perturbation amplitude measurements are made from the three-layer system and compared with measurements from 2, two-layer systems. It is observed that the presence of the upper, initially flat interface produces a decrease in growth of instability amplitude in the nonlinear phase over an equivalent single-interface configuration.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A new frontier in laboratory physics: magnetized electron–positron plasmas

We describe here efforts to create and study magnetized electron–positron pair plasmas, the existence of which in astrophysical environments is well-established. Laboratory incarnations of such systems are becoming ever more possible due to novel approaches and techniques in plasma, beam and laser physics. Traditional magnetized plasmas studied to date, both in nature and in the laboratory, exhibit a host of different wave types, many of which are generically unstable and evolve into turbulence or violent instabilities. This complexity and the instability of these waves stem to a large degree from the difference in mass between the positively and the negatively charged species: the ions and the electrons. The mass symmetry of pair plasmas, on the other hand, results in unique behaviour, a topic that has been intensively studied theoretically and numerically for decades, but experimental studies are still in the early stages of development. A levitated dipole device is now under construction to study magnetized low-energy, short-Debye-length electron–positron plasmas; this experiment, as well as a stellarator device that is in the planning stage, will be fuelled by a reactor-based positron source and make use of state-of-the-art positron cooling and storage techniques. Relativistic pair plasmas with very different parameters will be created using pair production resulting from intense laser–matter interactions and will be confined in a high-field mirror configuration. We highlight the differences between and similarities among these approaches, and discuss the unique physics insights that can be gained by these studies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Two-temperature-electron Zakharov equations for the dynamics of modulated collapse

Under the framework of the two-timescale method, we derived the two-temperature-electron Zakharov equations which can describe the wave-wave interaction among Langmuir wave, electromagnetic wave, and electron acoustic waves. Numerical results reveal that the modulation instability will lead the wave field collapse into a turbulent state. The spectrum obtained from the Fourier analysis shows a cascade of energy from large to small scales. In the collapse processes, the hot electrons are expelled by the ponderomotive force induced by the high frequency waves, and then density cavitons are formed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Acceleration of soliton by nonlinear Landau damping of dust-helical waves

The problem of nonlinear Landau damping of helicon waves in dusty plasma in particular emphasis to the acceleration of soliton is presented here. This in the framework of a collisionless, anisotropic homogeneous dusty plasma in one dimension, can be well described by two coupled dynamical equations of the generalized Zakharov type, with one extra nonlocal term coming from Landau damping. Nonlinear-nonlocal term gives rise to essential contributions relative to the local term. Then under different conditions, kinetic nonlinear Schroedinger equation is constructed and nonlinear decrement is obtained for two cases. It is noticed that the time dependant term in the ponderomotive force plays a significant role for this kind of damping. Additionally, it is shown that nonlinear Landau damping leads to the amplitude modulation of dust helicon waves, further modulational instability, and maximal growth rate is obtained when the group velocity of the helicon wave reaches the dust-acoustic speed. It is demonstrated that how the nonlinear Landau damping leads to the acceleration of soliton, which is eventually slowed down after transferring some of its energy to the wave. Emission of dust-acoustic wave by accelerated soliton is discussed briefly.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The Effect of Solidification Rate on Morphological Stability

At low solidification rates, the criterion for the onset of morphological instability parallels closely the criterion of constitutional supercooling. At somewhat larger rates of solidification, however, the results of the perturbation theory of morphological instability differ significantly from the predictions of constitutional supercooling. This arises because the critical wave length for instability decreases as solidification rate increases and thus the effects of capillarity (solid-liquid surface tension) play a strong stabilizing role. This gives rise to the concept of absolute stability, according to which the system will always be stable for a sufficiently large rate of solidification. This enhanced stabilization by capillarity is present only so long as local equilibrium is maintained at the solid-liquid interface. If the interfacial temperature drops below its equilibrium value by an amount dependent on growth rate, oscillatory morphological instabilities can occur. The differences among these various stability criteria are illustrated by means of some simple two-dimensional diagrams that should supplant the conventional plots of (temperature gradient)/(growth rate) vs. alloy concentration.

Sekerka, R. F.↗

Short-period atmospheric gravity waves - A study of their statistical properties and source mechanisms

Gravity waves for the one year period beginning 19 October 1976 around Palisades, New York, are investigated to determine their statistical properties and sources. The waves have typical periods of 10 min, pressure amplitudes of 3 Pa and velocities of 30 m/s. In general, the largest, amplitude waves occur during late fall and early winter when the upper tropospheric winds directly overhead are fastest and the static stability of the lower troposphere is greatest. Mean wave amplitudes correlate highly with the product of the mean maximum wind speed and the mean low level stratification directly aloft. A distinct diurnal variation of wave amplitudes with the largest waves occurring in the pre-dawn hours is also observed as a result of the increased static stability then. The majority of waves are generated by shear instability; however, a number of waves are generated by distant sources such as nuclear detonations or large thunderstorms. The waves with distant sources can be distinguished on the basis of their generally much higher coherency across the grid and velocities that depart markedly from the wind velocity at any point in the sounding.

Gedzelman, S. D.↗

Filamentation instability of current-driven dust ion-acoustic waves in a collisional dusty plasma

A theoretical investigation has been made of the dust ion-acoustic filamentation instability in an unmagnetized current-driven dusty plasma by using the Lorentz transformation formulas. The effect of collision between the charged particles with neutrals and their thermal motion on this instability is considered. Developing the filamentation instability of the current-driven dust ion-acoustic wave allows us to determine the period and the establishment time of the filamentation structure and threshold for instability development.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the Role of Surface Friction in Tropical Intraseasonal Oscillation

The Madden-Julian oscillation (MJO), or the tropical intraseasonal oscillation, has attracted much attention, ever since its discovery in the early seventies for reasons of both scientific understanding and practical forecasts. Among the theoretical interpretations of the MJO, the wave-CISK (conditional instability of the second kind) mechanism is the most popular. The basic idea of the wave-CISK interpretation is that the cooperation between the low-level convergence associated with the eastward moving Kelvin wave and the cumulus convection generates an eastward moving Kelvin-wave-like mode. Later it was recognized that the MJO has an important Rossby-wave-like component. However linear analysis and numerical simulations based on it (even when conditional heating is used) have revealed two problems with the wave-CISK interpretation; i.e., excessive speed and the most preferred scale being zero or grid scale. Chao (1995) presented a discussion of these problems and attributed these problems to the particular type of expression for the cumulus heating used in the linear analyses and numerical studies (i.e., the convective heating is proportional to low-level convergence and a fixed vertical heating profile). It should be pointed out that in the relatively successful simulation of MJO with general circulation models the problem of grid scale being the most preferred scale does not appear and die problem of excessive speed is not as severe as in the linear analysis.

Chao, Winston C.↗

Electron parametric instabilities in nonuniform plasma with a strong density gradient excited by femtosecond laser pulses of subrelativistic intensity

We consider the excitation of electron parametric instability in the oblique incidence of femtosecond laser radiation of subrelativistic intensity on a plasma with the nonuniformity scale length of the order of the radiation wavelength λ. Estimates are obtained for two-plasmon decay instability increments in this plasma, and the generation of plasma waves due to parametric instabilities is numerically simulated by the particle-in-cell technique. The spatial spectrum of these waves is shown to broaden to the level corresponding to several values of the wavenumber k{sub 0} of the component aligned with the electron density gradient and the wavenumbers of the component normal to the gradient have values ∼ k{sub 0}. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Experimental Evidence of Predominantly Transverse Electron Plasma Waves Driven by Stimulated Raman Scattering of Picosecond Laser Pulses

We report on highly time- and space-resolved measurements of the evolution of electron plasma waves driven by stimulated Raman scattering of a picosecond, single laser speckle propagating through a preformed underdense plasma. Two-dimensional Thomson scatter spectra indicate that the dominant waves have significant transverse components. These results are supported by particle-in-cell simulations which pinpoint the dominant role of the wave front bowing and of secondary nonlinear electrostatic instabilities in the evolution of the plasma waves.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Theories of radio emissions and plasma waves

The complex region of Jupiter's radio emissions at decameter wavelengths, the so-called DAM, is considered, taking into account the basic theoretical ideas which underly both the older and newer theories and models. Linear theories are examined, giving attention to direct emission mechanisms, parallel propagation, perpendicular propagation, and indirect emission mechanisms. An investigation of nonlinear theories is also conducted. Three-wave interactions are discussed along with decay instabilities, and three-wave up-conversio. Aspects of the Io and plasma torus interaction are studied, and a mechanism by which Io can accelerate electrons is reviewed.

Goldstein, M. L.↗

Review of the physics of enhancing vortex lift by unsteady excitation

A review aimed at providing a physical understanding of the crucial mechanisms for obtaining super lift by means of unsteady excitations is presented. Particular attention is given to physical problems, including rolled-up vortex layer instability and receptivity, wave-vortex interaction and resonance, nonlinear streaming, instability of vortices behind bluff bodies and their shedding, and vortex breakdown. A general theoretical framework suitable for handling the unsteady vortex flows is introduced. It is suggested that wings with swept and sharp leading edges, equipped with devices for unsteady excitations, could yield the first breakthrough of the unsteady separation barrier and provide super lift at post-stall angle of attack.

Wu, J. Z.↗

Effects of finite heat conductivity on instabilities in a rotating plasma

Analytical theory of magnetorotational and convective instabilities in a rotating cylindrical plasma with finite heat conductivity is developed and discussed. The heat conductivity is incorporated into the standardized equations of the regular magnetohydrodynamic approach to studying these instabilities. A case of high-{beta} plasma ({beta} is the ratio of plasma pressure to the magnetic field pressure) and the modes with parallel phase velocity much smaller than the sound velocity is particularly emphasized and considered in the quasi-incompressible approximation. It is shown that this approximation is more adequate than the Boussinesq approximation. Both these approximations lead to the same results for aperiodical instabilities of the axisymmetric modes which are hybrids of the magnetorotational and convective instabilities. On the other hand, the Boussinesq approximation overlooks the heat-conductivity-induced instabilities predicted by the quasi-incompressible approximation describing the dissipative excitation of the slow magnetoacoustic and Alfven waves. Non-axisymmetric aperiodical instabilities are considered. It is shown that, for such modes, the role of convective instabilities is greater than for the magnetorotational instability.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Investigation of Natural Circulation Instability and Transients in Passively Safe Small Modular Reactors

The NEUP funded project, NEUP-3496, aims to experimentally investigate two-phase natural circulation flow instability that could occur in Small Modular Reactors (SMRs), especially for natural circulation SMRs. The objective has been achieved by systematically performing tests to study the general natural circulation instability characteristics and the natural circulation behavior under start-up or design basis accident conditions. Experimental data sets highlighting the effect of void reactivity feedback as well as the effect of power ramp-up rate and system pressure have been used to develop a comprehensive stability map. The safety analysis code, RELAP5, has been used to evaluate experimental results and models. Improvements to the constitutive relations for flashing have been made in order to develop a reliable analysis tool. This research has been focusing on two generic SMR designs, i.e. a small modular Simplified Boiling Water Reactor (SBWR) like design and a small integral Pressurized Water Reactor (PWR) like design. A BWR-type natural circulation test facility was firstly built based on the three-level scaling analysis of the Purdue Novel Modular Reactor (NMR) with an electric output of 50 MWe, namely NMR-50, which represents a BWR-type SMR with a significantly reduced reactor pressure vessel (RPV) height. The experimental facility was installed with various equipment to measure thermalhydraulic parameters such as pressure, temperature, mass flow rate and void fraction. Characterization tests were performed before the startup transient tests and quasi-steady tests to determine the loop flow resistance. The control system and data acquisition system were programmed with LabVIEW to realize the realtime control and data storage. The thermal-hydraulic and nuclear coupled startup transients were performed to investigate the flow instabilities at low pressure and low power conditions for NMR-50. Two different power ramps were chosen to study the effect of startup power density on the flow instability. The experimental startup transient results showed the existence of three different flow instability mechanisms, i.e., flashing instability, condensation induced flow instability, and density wave oscillations. In addition, the void-reactivity feedback did not have significant effects on the flow instability during the startup transients for NMR-50. ii Several initial startup procedures with different power ramp rates were experimentally investigated to eliminate the flow instabilities observed from the startup transients. Particularly, the very slow startup transient and pressurized startup transient tests were performed and compared. It was found that the very slow startup transients by applying very small power density can eliminate the flashing oscillations in the single-phase natural circulation and stabilize the flow oscillations in the phase of net vapor generation. The initially pressurized startup procedure was tested to eliminate the flashing instability during the startup transients as well. The pressurized startup procedure included the initial pressurization, heat-up, and venting process. The startup transient tests showed that the pressurized startup procedure could eliminate the flow instability during the transition from single-phase flow to two-phase flow at low pressure conditions. The experimental results indicated that both startup procedures were applicable to the initial startup of NMR. However, the pressurized startup procedures might be preferred due to short operating hours required. In order to have a deeper understanding of natural circulation flow instability, the quasi-steady tests were performed using the test facility installed with preheater and subcooler. The effect of system pressure, core inlet subcooling, core power density, inlet flow resistance coefficient, and void reactivity feedback were investigated in the quasi-steady state tests. The experimental stability boundaries were determined between unstable and stable flow conditions in the dimensionless stability plane of inlet subcooling number and Zuber number. To predict the stability boundary theoretically, linear stability analysis in the frequency domain was performed at four sections of the natural circulation test loop. The flashing phenomena in the chimney section was considered as an axially uniform heat source. And the dimensionless characteristic equation of the pressure drop perturbation was obtained by considering the void fraction effect and outlet flow resistance in the core section. The theoretical flashing boundary showed some discrepancies with previous experimental data from the quasi-steady state tests. In the future, thermal non-equilibrium was recommended to improve the accuracy of flashing instability boundary. As another part of the funded research, flow instabilities of a PWR-type SMR under low pressure and low power conditions were investigated experimentally as well. The NuScale reactor design was selected as the prototype for the PWR-type SMR. In order to experimentally study the natural circulation behavior of NuScale iii reactor during accidental scenarios, detailed scaling analyses are necessary to ensure that the scaled phenomena could be obtained in a laboratory test facility. The three-level scaling method is used as well to obtain the scaling ratios derived from various non-dimensional numbers. The design of the ideally scaled facility (ISF) was initially accomplished based on these scaling ratios. Then the engineering scaled facility (ESF) was designed and constructed based on the ISF by considering engineering limitations including laboratory space, pipe size, and pipe connections etc. PWR-type SMR experiments were performed in this well-scaled test facility to investigate the potential thermal hydraulic flow instability during the blowdown events, which might occur during the loss of coolant accident (LOCA) and loss of heat sink accident (LOHS) of the prototype PWR-type SMR. Two kinds of experiments, normal blowdown event and cold blowdown event, were experimentally investigated and compared with code predictions. The normal blowdown event was experimentally simulated since an initial condition where the pressure was lower than the designed pressure of the experiment facility, while the code prediction of blowdown started from the normal operation condition. Important thermal hydraulic parameters including reactor pressure vessel (RPV) pressure, containment pressure, local void fraction and temperature, pressure drop and natural circulation flow rate were measured and analyzed during the blowdown event. The pressure and water level transients are similar to the experimental results published by NuScale [51], which proves the capability of current loop in simulating the thermal hydraulic transient of real PWR-type SMR. During the 20000s blowdown experiment, water level in the core was always above the active fuel assemble during the experiment and proved the safety of natural circulation cooling and water recycling design of PWR-type SMR. Besides, pressure, temperature, and water level transient can be accurately predicted by RELAP5 code. However, the oscillations of natural circulation flow rate, water level and pressure drops were observed during the blowdown transients. This kind of flow oscillations are related to the water level and the location upper plenum, which is a path for coolant flow from chimney to steam generator and down comer. In order to investigate the transients start from the opening of ADS valve in both experimental and numerical way, the cold blow-down experiment is conducted. For the cold blowdown event, different from setting both reactor iv pressure vessel (RPV) and containment at high temperature and pressure, only RPV was heated close to the highest designed pressure and then open the ADS valve, same process was predicted using RELAP5 code. By doing cold blowdown experiment, the entire transients from the opening of ADS can be investigated by code and benchmarked with experimental data. Similar flow instability observed in the cold blowdown experiment. The comparison between code prediction and experiment data showed that the RELAP5 code can successfully predict the pressure void fraction and temperature transient during the cold blowdown event with limited error, but numerical instability exists in predicting natural circulation flow rate. Besides, the code is lack of capability in predicting the water level related flow instability observed in experiments.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗