Search NASA⌕ Search

SEARCH · Search NASA

Results for “Intact”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Structure and Bonding of Tungsten Oxide Clusters on Nanostructured Cu-O Surfaces

(WO3)3 gas-phase clusters generated via vacuum sublimation are deposited under UHV and low temperature (5 K) conditions on a Cu(110) 'stripe' phase consisting of alternating Cu-O (2x1) and clean Cu regions. STM imaging shows that the clusters adsorb as intact units on both substrates, and the suggested adsorption geometries are confirmed by density-functional (DF) simulations. On the clean surface the overall distortion is minor and we are able to image the nodal structure of an individual molecular orbital in the STM at low bias, whereas on the Cu-O surface both the clusters and the substrate are significantly distorted, due to the strong oxygen affinity of W atoms. On both surfaces cluster and Cu electronic states are appreciably mixed, and electron charge is donated by the surface to the cluster. The experimentally STS-determined DOS signature of the adsorption complex consists in two peaks across the Fermi energy and is well reproduced by the DF calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Site Energies of Active and Inactive Pheophytins in the Reaction Center of Photosystem II from Chlamydomonas Reinhardtii

It is widely accepted that the primary electron acceptor in various Photosystem II (PSII) reaction center (RC) preparations is pheophytin {alpha} (Pheo {alpha}) within the D1 protein (Pheo{sub D1}), while Pheo{sub D2} (within the D2 protein) is photochemically inactive. The Pheo site energies, however, have remained elusive, due to inherent spectral congestion. While most researchers over the past two decades placed the Q{sub y}-states of Pheo{sub D1} and Pheo{sub D2} bands near 678-684 and 668-672 nm, respectively, recent modeling [Raszewski et al. Biophys. J. 2005, 88, 986-998; Cox et al. J. Phys. Chem. B 2009, 113, 12364-12374] of the electronic structure of the PSII RC reversed the assignment of the active and inactive Pheos, suggesting that the mean site energy of Pheo{sub D1} is near 672 nm, whereas Pheo{sub D2} ({approx}677.5 nm) and Chl{sub D1} ({approx}680 nm) have the lowest energies (i.e., the Pheo{sub D2}-dominated exciton is the lowest excited state). In contrast, chemical pigment exchange experiments on isolated RCs suggested that both pheophytins have their Q{sub y} absorption maxima at 676-680 nm [Germano et al. Biochemistry 2001, 40, 11472-11482; Germano et al. Biophys. J. 2004, 86, 1664-1672]. To provide more insight into the site energies of both Pheo{sub D1} and Pheo{sub D2} (including the corresponding Q{sub x} transitions, which are often claimed to be degenerate at 543 nm) and to attest that the above two assignments are most likely incorrect, we studied a large number of isolated RC preparations from spinach and wild-type Chlamydomonas reinhardtii (at different levels of intactness) as well as the Chlamydomonas reinhardtii mutant (D2-L209H), in which the active branch Pheo{sub D1} is genetically replaced with chlorophyll {alpha} (Chl {alpha}). We show that the Q{sub x}-/Q{sub y}-region site energies of Pheo{sub D1} and Pheo{sub D2} are {approx}545/680 nm and {approx}541.5/670 nm, respectively, in good agreement with our previous assignment [Jankowiak et al. J. Phys. Chem. B 2002, 106, 8803?8814]. The latter values should be used to model excitonic structure and excitation energy transfer dynamics of the PSII RCs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Direct Probes of 4 nm Diameter Gold Nanoparticles Interacting with Supported Lipid Bylayers

Interfacial charge densities and potentials are determined for silica-supported phospholipid bilayers formed from lipids having zwitterionic, negatively charged, and positively charged headgroups. Quartz crystal microbalance with dissipation (QCM-D), fluorescence recovery after photobleaching (FRAP), and atomic force microscopy demonstrate the presence of well-formed supported lipid bilayers, which, as probed by vibrational sum frequency generation (SFG), undergo negligible structural changes along their alkyl chains when NaCl concentration is raised from 0.001 to 0.1 M. From second harmonic generation (SHG) measurements we estimate that each zwitterionic headgroup of the bilayer formed from pure DOPC is associated with an apparent charge of -0.028(+0.008/-0.007)×10-¹⁹C, corresponding to 1.8 ± 0.5 % of an elementary negative charge. Moreover, we show that a supported lipid bilayer carrying an apparent negative interfacial potential may interact with not just positively charged 4-nm diameter gold nanoparticles but also negatively charged gold nanoparticles. In this latter case, charge-charge repulsion does not appear to inhibit particle-bilayer interactions and is likely overcome by multivalent interactions that are estimated to involve 3-5 hydrogen-bond equivalents. FRAP, QCM-D, and SFG measurements indicate that the bilayers remain intact under the conditions of the experiments. SHG charge screening experiments are consistent with an apparent zero net charge density associated with the positively charged gold nanoparticles when they are attached to a supported lipid bilayer carrying an apparent negative potential. The results presented here serve to benchmark experimental and computational studies of the nano-bio interface.

Environmental Molecular Sciences Laboratory↗

Analysis of the Relationship between Reaction Energies of Electrophilic SWNT Additions and Sidewall Curvature: Chiral Nanotubes

The research described in this product was performed in part in the Environmental Molecular Sciences Laboratory, a national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory. The relationship of reaction energies for CH2/NH/O exo- and endo-[2 + 1] cycloadditions to chiral singlewalled carbon nanotube (SWNT) sidewalls with the inverse tube diameter (1/d) was investigated using density functional theory (DFT) and density functional tight binding (DFTB) methods. We considered additions to the three nonequivalent C-C bond types t (bond most parallel to tube axis), d (“diagonal” bond, slightly skewed), and p (bond most perpendicular to tube axis), using hydrogen-terminated (2n,n) SWNT model systems with n ) 2-8. Exoadditions are classified into two types, one where the original C-C bond is broken (exo(l)), and one where it remains intact (exo(s)) in the addition complex. Endoadditions are found to always belong to the latter (endo(s)) type. It is found that (a) exoadditions are more exothermic than endo additions, and (b) that exoadditions are more exothermic with larger bond-tube axis angle (p > d > t). A nearly perfect linear relationship between the total reaction energy ΔE and 1/d holds only for individual endo, exo(s) and exo(l) addition series to specific t/d/p bonds, while ΔE, as well as the SWNT deformation energy (DEF) and the interaction energy (INT) between deformed SWNT and deformed addends, are quadratically dependent on 1/d, when both negative (endo) and positive (exo(s)) bond curvatures are considered in linear regression analysis. Energy decomposition analysis shows that for endo- and exo(s)- series the curvature dependence of ΔE is dominated by INT, while for exo(l) series, this quantity is dominated by DEF.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure and Order of Phosphonic Acid-Based Self-Assembled Based Self-Assembled

Organophosphonic acid self-assembled monolayers (SAMs) on oxide surfaces have recently seen increased use in electrical and biological sensor applications. The reliability and reproducibility of these sensors require good molecular organization in these SAMs. In this regard, packing, order, and alignment in the SAMs is important, as it influences the electron transport measurements. In this study, we examine the order of hydroxyl- and methyl-terminated phosphonate films deposited onto silicon oxide surfaces by the tethering by aggregation and growth method using complementary, state-of-art surface characterization tools. Near-edge X-ray absorption fine structure (NEXAFS) spectroscopy and in situ sum frequency generation (SFG) spectroscopy are used to study the order of the phosphonate SAMs in vacuum and under aqueous conditions, respectively. X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry results show that these samples form chemically intact monolayer phosphonate films. NEXAFS and SFG spectroscopy showed that molecular order exists in the octadecylphosphonic acid and 11-hydroxyundecylphosphonic acid SAMs. The chain tilt angles in these SAMs were approximately 37{sup o} and 45{sup o}, respectively.

36 MATERIALS SCIENCE↗

A Simple Method to Produce Trivalent Colloidal Particles

Trivalent patchy colloidal particles are synthesized using a two-step μ-contact printing method. First, one pole of a particle is modified, then the other. With the center portion of the particle left intact, the final chemical makeup consists of three distinct patches of different chemical composition whose relative areas can be controlled. This method depends on preparing stamps with sufficient adhesion to lift off particles yet mild enough adhesion for their subsequent detachment. Furthermore, this method adjusts stamp stiffness, allowing the respective areas of the two printed poles to be controlled separately. Here, to check the efficacy of the method, the shapes of the chemically modified poles were examined using scanning electron microscopy (SEM) after Au nanoparticle adsorption. Fluorescence imaging further confirmed the trivalent patchy particle geometry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surface-Initiated Titanium-Mediated Coordination Polymerization from Catalyst-Functionalized Single and Multiwalled Carbon Nanotubes

Single (SWNTs) and multiwalled (MWNTs) carbon nanotubes were functionalized with a titanium alkoxide catalyst through a Diels-Alder cycloaddition reaction. The catalyst-functionalized carbon nanotubes (CNTs) were used for the surface initiated titanium-mediated coordination polymerizations of L-lactide (L-LA), -caprolactone (-CL) and n-hexyl isocyanate (HIC) employing the grafting from technique. 1H NMR, IR and Raman spectra showed that the precursor catalyst was successfully synthesized and covalently attached on the CNTs surface. Thermogravimetric analysis (TGA) revealed that the grafted poly(L-lactide) (PLLA) content could be controlled with time. The final polymer-grafted CNTs were readily dissolved in organic solvents as compared to the insoluble pristine and catalyst-functionalized CNTs. The presence of thick layers of polymers around the CNTs was observed through transmission electron microscopy (TEM). Differential scanning calorimetry (DSC) proved that the glass transition (Tg) and melting (Tm) temperatures of the PLLA are affected by the presence of the CNTs, while PLLA R-helix conformation remains intact, as revealed by the circular dichroism (CD) spectra.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Topical Delivery of Interferon Alpha by Biphasic Vesicles: Evidence for a Novel Nanopathway across the Stratum Corneum

Noninvasive delivery of macromolecules across intact skin is challenging but would allow for needle-free administration of many pharmaceuticals. Biphasic vesicles, a novel lipid-based topical delivery system, have been shown to deliver macromolecules into the skin. Investigation of the delivery mechanism of interferon alpha (IFN {alpha}), as a model protein, by biphasic vesicles could improve understanding of molecular transport through the stratum corneum and allow for the design of more effective delivery systems. The interaction of biphasic vesicles with human skin and isolated stratum corneum membrane was investigated by confocal microscopy, differential scanning calorimetry (DSC) and small- and wide-angle X-ray scattering (SAXS and WAXS). Confocal microscopy revealed that biphasic vesicles delivered IFN {alpha} intercellularly, to a depth of 70 {micro}m, well below the stratum corneum and into the viable epidermis. DSC and SAXS/WAXS data suggest that the interaction of biphasic vesicles with SC lipids resulted in the formation of a three-dimensional cubic Pn3m polymorphic phase by the molecular rearrangement of intercellular lipids. This cubic phase could be an intercellular permeation nanopathway that may explain the increased delivery of IFN {alpha} by biphasic vesicles. Liposomes and submicrometer emulsion (the individual building blocks of biphasic vesicles) separately and methylcellulose gel, an alternative topical vehicle, did not induce a cubic phase and delivered low amounts of IFN {alpha} below the stratum corneum. Molecular modeling of the cubic Pn3m phase and lamellar-to-cubic phase transitions provides a plausible mechanism for transport of IFN {alpha}. It is hypothesized that induction of a Pn3m cubic phase in stratum corneum lipids could make dermal and transdermal delivery of other macromolecules also possible.

59 BASIC BIOLOGICAL SCIENCES↗

Atomic-scale investigation of graphene grown on Cu foil and the effects of thermal annealing.

We have investigated the effects of thermal annealing on ex-situ chemically vapor deposited submonolayer graphene islands on polycrystalline Cu foil at the atomic-scale using ultrahigh vacuum scanning tunneling microscopy. Low-temperature annealed graphene islands on Cu foil (at 430 C) exhibit predominantly striped Moir patterns, indicating a relatively weak interaction between graphene and the underlying polycrystalline Cu foil. Rapid high-temperature annealing of the sample (at 700-800 C) gives rise to the removal of Cu oxide and the recovery of crystallographic features of the copper that surrounds the intact graphene. These experimental observations of continuous crystalline features between the underlying copper (beneath the graphene islands) and the surrounding exposed copper areas revealed by high-temperature annealing demonstrates the impenetrable nature of graphene and its potential application as a protective layer against corrosion.

36 MATERIALS SCIENCE↗

Nanoimprint-Induced Molecular Orientation in Semiconducting Polymer Nanostructures

The morphology and orientation of thin films of the polymer poly-3(hexylthiophene) - important parameters influencing electronic and photovoltaic device performance - have been significantly altered through nanoimprinting with 100 nm spaced grooves. Grazing-incidence small-angle X-ray scattering studies demonstrate the excellent fidelity of the pattern transfer, while wide-angle scattering convincingly shows an imprinting-induced {pi}-{pi} reorientation and polymer backbone alignment along the imprinted grooves. Surprisingly, temperature-dependent scattering measurements indicate that the imprinted induced orientation and alignment remain intact even at temperatures where the imprinted topographical features nearly vanish.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Comparative Informatics Analysis to Evaluate Site-Specific Protein Oxidation in Multidimensional LC-MS/MS Data

Redox proteomics has yielded molecular insight into diseases of protein dysfunction attributable to oxidative stress, underscoring the need for robust detection of protein oxidation products. Additionally, oxidative protein surface mapping techniques utilize hydroxyl radicals to gain structural insight about solvent exposure. Interpretation of tandem mass spectral data is a critical challenge for such investigations, because reactive oxygen species target a wide breadth of amino acids. Additionally, oxidized peptides may be generated in a wide range of abundances since the reactivity of hydroxyl radicals with different amino acids spans three orders of magnitude. Taken together, these attributes of oxidative footprinting pose both experimental and computational challenges to detecting oxidized peptides that are naturally less abundant than their unoxidized counterparts. In this study, three model proteins were oxidized electrochemically and analyzed at both the intact protein and peptide levels. A multidimensional chromatographic strategy was utilized to expand the dynamic range of oxidized peptides measurements. Peptide mass spectral data were searched by the hybrid software packages Inspect and Byonic, which incorporate de novo elements of spectral interpretation into a database search. This dynamic search capacity accommodates the challenge of searching for more than forty oxidative mass shifts that can occur in a staggering variety of possible combinatorial occurrences. A prevailing set of oxidized residues was identified with this comparative approach, and evaluation of these sites was informed by solvent accessible surface area gleaned through molecular dynamics simulations. Along with increased levels of oxidation around highly reactive hotspot sites as expected, the enhanced sensitivity of these measurements uncovered a surprising level of oxidation on less reactive residues.

McClintock, Carlee↗

Identification of Ultramodified Proteins Using Top-Down Mass Spectra

Post-translational modifications (PTMs) play an important role in various biological processes through changing protein structure and function. Some ultramodified proteins (like histones) have multiple PTMs forming PTM patterns that define the functionality of a protein. While bottom-up mass spectrometry (MS) has been successful in identifying individual PTMs within short peptides, it is unable to identify PTM patterns spread along entire proteins in a coordinated fashion. In contrast, top-down MS analyzes intact proteins and reveals PTM patterns along the entire proteins. However, while recent advances in instrumentation have made top-down MS accessible to many laboratories, most computational tools for top-down MS focus on proteins with few PTMs and are unable to identify complex PTM patterns. We propose a new algorithm, MS-Align-E, that identifies both expected and unexpected PTMs in ultramodified proteins. We demonstrate that MS-Align-E identifies many protein forms of histone H4 and benchmark it against the currently accepted software tools.

Environmental Molecular Sciences Laboratory↗

A strategy for degradomic-peptidomic analysis of the human blood plasma

Human degradome and its peptidome products are closely related with many pathologic states including cancer. Detection of the peptidome products can provide information of the protein degradation and the activity of the intercellular and intracellular proteases related to diseases. In this work, we describe the AC/SEC-HRLC-FT MS/MS-UStags strategy for top-down analysis of the human blood peptidome components and their modifications. The human blood peptidome is isolated through application of AC/SEC, which enriches its components by >300-fold. These components are separated by the long column HRLC providing a peak capacity of ~300 for the components having MW of up to 20 kDa under the condition of elongated elution. The separated species are identified by the FT MS/MS-UStags sequencing method. From the examined blood plasma sampled from a healthy person, we identified >200 peptidome peptides that originated from 29 degradome substrates from the IPI human protein database (~70,000 entries) without the identification errors. The peptidome peptide sequence mutations and modifications, including acetylation, cysteinylation, acetylhexosamine, oxidation, didehydro, amidation, and pyro-glu, were observed for the peptidome components. Intact low molecular weight proteins were observed only having modified forms. The strategy described here is now used to study the degradation activities in the early-stage breast cancer patient blood, including the selectivity for degradome substrates and functional domains, the peptide cleavage specificity, and the magnitude of degradome substrate involvements in degradation, which provides the insights and footprints for the disease-related degradations in the blood.

59 BASIC BIOLOGICAL SCIENCES↗

Scalable En Echelon Shear‐Fracture Aperture‐Roughness Mechanism: Theory, Validation, and Implications

Abstract Shear fractures can facilitate fluid conductivity through rock. Aperture and roughness are controlling characteristics for a fracture's fluid conductivity. Inspired by en echelon fractures, we develop a shear “fracturelet” model that predicts anisotropic aperture with respect to the direction of shearing, rougher (nonplanar) rather than smoother (planar) fractures, and the bounds of this roughness for a coalesced fracture. This tendency for rougher fracture creation is validated by in situ X‐ray images and fluid conductivity measurements from triaxial direct shear experiments on anhydrite and shale. These experiments were conducted at confining stresses from 4 to 30 MPa and shear displacement magnitudes from 0 to 2 mm on initially intact rock specimens. Hydraulic, dilatational, and local fracture apertures were measured in the experiments. Apertures exhibited strong anisotropy with more conductive flow paths forming perpendicular to the direction of shearing. Local and dilatational aperture were found to be positively correlated with increasing shear displacement but hydraulic aperture was found to vary significantly, always having values smaller than the other aperture measures at factors ranging from 0.6 to 0.0. An implication of these results is that shear fractures have a mechanism for simultaneously exhibiting very low fluid conductivity and high fluid storage volume.

Frash, Luke P.↗

Experimental Relationship Between Compressional Wave Attenuation and Surface Strains in Brittle Rock

Linear ultrasonic testing (LUT) has been extensively used as a tool for the evaluation of damage processes in various materials ranging from synthetic metals to natural geomaterials, such as rocks. A key limitation of LUT-based damage studies to date is the lack of explicit evidence used in associating material damage with the changes in measured LUT attributes (e.g., ultrasonic wave amplitude and velocity). In this study, the evolution of the full-field strains in brittle rock specimens (Lyons sandstone) subjected to failure are analyzed in real time and linked with the changes in the ultrasonic wave amplitude in localized areas illuminated by ultrasonic beams, termed as the ultrasonic image areas. The noncontact optical full-field displacement measurement method of 2-D digital image correlation is implemented in combination with the LUT procedure to continuously track changes in the ultrasonic wave amplitude with the evolution of strains across the surface of the uniaxially loaded intact rock specimens. The ultrasonic amplitude showed near-linear correlation with the intensity of inelastic tensile strain recorded in the rock specimens. The results from the study corroborate that the ultrasonic changes are in fact influenced by the regions of tensile cracking, which is the primary inelastic deformation mechanism in brittle rocks.

15 GEOTHERMAL ENERGY↗

Improving Representation of Deforestation Effects on Evapotranspiration in the E3SM Land Model

Abstract Evapotranspiration (ET) plays an important role in land‐atmosphere coupling of energy, water, and carbon cycles. Following deforestation, ET is typically observed to decrease substantially as a consequence of decreases in leaf area and roots and increases in runoff. Changes in ET (latent heat flux) revise the surface energy and water budgets, which further affects large‐scale atmospheric dynamics and feeds back positively or negatively to long‐term forest sustainability. In this study, we used observations from a recent synthesis of 29 pairs of adjacent intact and deforested FLUXNET sites to improve model parameterization of stomatal characteristics, photosynthesis, and soil water dynamics in version 1 of the Energy Exascale Earth System Model (E3SM) Land Model (ELMv1). We found that default ELMv1 predicts an increase in ET after deforestation, likely leading to incorrect estimates of the effects of deforestation on land‐atmosphere coupling. The calibrated model accurately represented the FLUXNET observed deforestation effects on ET. Importantly, the search for global optimal parameters converged at values consistent with recent observational syntheses, confirming the reliability of the calibrated physical parameters. Applying this improved model parameterization to the globe scale reduced the bias of annual ET simulation by up to ~600 mm/year. Analysis on the roles of parameters suggested that future model development to improve ET simulation should focus on stomatal resistance and soil water‐related parameterizations. Finally, our predicted differences in seasonal ET changes from deforestation are large enough to substantially affect land‐atmosphere coupling and should be considered in such studies.

54 ENVIRONMENTAL SCIENCES↗

Discriminating Underground Nuclear Explosions Leading To Late-Time Radionuclide Gas Seeps

Utilizing historical data from the U.S. nuclear test program and freely available barometric pressure data, we performed an analytical barometric-pumping efficiency analysis to determine factors resulting in late-time radionuclide gas seeps from underground nuclear explosions. In this work, we considered 16 underground nuclear explosions with similar geology and test setup, of which five resulted in the measurement of late-time radionuclide gas concentrations at the ground surface. Additionally, the factors we considered include barometric frequency and amplitude, depth of burial, air-filled porosity, intact-rock permeability, fracture aperture, and fracture spacing. The analysis indicates that the best discriminators of late-time radionuclide gas seeps for these explosions are barometric frequency and amplitude and air-filled porosity. While geologic information on fracture aperture and spacing is not available for these explosions, the sensitivity of barometric-pumping efficiency to fracture aperture indicates that it would likely also be a good discriminator.

58 GEOSCIENCES↗