Search NASA⌕ Search

SEARCH · Search NASA

Results for “Internal Flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Numerical methods for large-scale, time-dependent partial differential equations

A survey of numerical methods for time dependent partial differential equations is presented. The emphasis is on practical applications to large scale problems. A discussion of new developments in high order methods and moving grids is given. The importance of boundary conditions is stressed for both internal and external flows. A description of implicit methods is presented including generalizations to multidimensions. Shocks, aerodynamics, meteorology, plasma physics and combustion applications are also briefly described.

Turkel, E.↗

Comparative thermal analysis of alternate Cryogenic Fluid Management Experiment (CFME) configurations

The Cryogenic Fluid Management Experiment (CFME) was analyzed to assess the feasibility and advisability of deleting the vapor cooled shield (VCS) from the baseline CFME insulation and pressure control system. Two alternate concepts of CFME insulation and pressure control, neither of which incorporated the VCS, were investigated. The first concept employed a thermodynamic vent system (TVS) to throttle the flow through an internal wall mounted heat exchanger (HX) within the pressure vessel to decrease boiloff and pressure rise rate, while the second concept utilized a TVS without an internal heat exchanger. Only the first concept was viable. Its performance was assessed for a seven day mission and found to be satisfactory. It was also concluded that VCS development costs would be greater than for an internal HX installation. Based upon the above comparisons, the HX was recommended as a replacement for the VCS.

Merino, F.↗

Direct simulation Monte Carlo technique for modeling of the environment in the vicinity of the Space Shuttle Orbiter

A program for analyzing the flowfield parameters in the neighborhood of the Space Shuttle Orbiter has been developed. The program uses the direct simulation Monte Carlo method, which is a completely probabilistic Monte Carlo technique capable of analyzing 3-dimensional steady or unsteady flow with prescribed internal and external boundary conditions. The freestream flux densities incident on the external flowfield boundaries are calculated from the drifting Maxwellian gas properties of the freestream. The flux entering the flowfield from the internal boundary is calculated from the outgassing flux density distribution over the Shuttle external surface and the prescribed discrete source fluxes. This technique produces a numerical flowfield solution which is the probabilistic equivalent of a complete solution of the time-dependent, 3-dimensional Boltzmann equation. Flowfield results are presented for the following configurations: (1) Shuttle angles of attack of 0 and 90 deg, (2) freestream density 10 to the 9th - 10 to the 11th per cu cm, (3) Shuttle outgassing flux density, and (4) operation of the aft downfiring vernier Reaction Control System (RCS) engine. Results are presented for column density distribution of outgassed and engine species and for the flux density of outgassed and engine species incident on the Shuttle bay and the windshield.

Melfi, L. T., Jr.↗

A convective model for turbulent mixing in rotating convection zones

The effects of rotation are included in an analytical model for the convective motions in a plane-parallel layer of an ideal fluid. The turbulent stress tensor, formed by taking products and averages of the various velocity components, is calculated for an arbitrary eddy size and shape. Heuristic formulae presented for determining the size and shape of the dominant eddy then give a fully specified stress tensor. Applications for this stress tensor in problems of stellar internal dynamics, heat flow, scalar diffusion, and dynamo theory are suggested. The resultant stresses tend to produce differential rotation profiles with rapidly rotating equators and interiors. The dynamo activity associated with these convective motions tends to occur near the lower boundary of the convection zone.

Hathaway, D. H.↗

Interior structure of Uranus

Key measurements are discussed which are diagnostic of Uranus' interior structure and evolutionary history, and reviews their present status. Typical interior models have chondritic cores, but have the bulk of their mass in an envelope consisting of ice component, principally H2O. The total amount of free H2 in the planet cannot exceed approximately 1 to 2 earth masses. Measurements of the gravitational moments of Uranus are beginning to be accurate enough to constrain models, but are limited in utility by uncertainty in the rotation period. Discussed is evidence that the outermost planetary layers have a gravitationally significant quantity of denser material (ice component?) in addition to H2 and He. The He/H ratio and the deuterium abundance in the atmosphere may be diagnostic of the planet's previous evolutionary history. It is argued that the planet's interior is likely to now be at a temperature approximately 10(3) deg K. Uranus' interior with Neptune's in a number of ways, considering heat flow, degree of internal differentiation, and possible magnetic field.

Hubbard, W. B.↗

Finite element techniques for the Navier-Stokes equations in the primitive variable formulation and the vorticity stream-function formulation

Finite element procedures for the Navier-Stokes equations in the primitive variable formulation and the vorticity stream-function formulation have been implemented. For both formulations, streamline-upwind/Petrov-Galerkin techniques are used for the discretization of the transport equations. The main problem associated with the vorticity stream-function formulation is the lack of boundary conditions for vorticity at solid surfaces. Here an implicit treatment of the vorticity at no-slip boundaries is incorporated in a predictor-multicorrector time integration scheme. For the primitive variable formulation, mixed finite-element approximations are used. A nine-node element and a four-node + bubble element have been implemented. The latter is shown to exhibit a checkerboard pressure mode and a numerical treatment for this spurious pressure mode is proposed. The two methods are compared from the points of view of simulating internal and external flows and the possibilities of extensions to three dimensions.

Glaisner, F.↗

Status of computational fluid dynamics in the United States

CFD-related progress in U.S. aerospace industries and research institutions is evaluated with respect to methods employed, their applications, and the computer technologies employed in their implementation. Goals for subsonic CFD are primarily aimed at greater fuel efficiency; those of supersonic CFD involve the achievement of high sustained cruise efficiency. Transatmospheric/hypersonic vehicles are noted to have recently become important concerns for CFD efforts. Attention is given to aspects of discretization, Euler and Navier-Stokes general purpose codes, zonal equation methods, internal and external flows, and the impact of supercomputers and their networks in advancing the state-of-the-art.

Kutler, Paul↗

Velocity-pressure integrated versus penalty finite element methods for high Reynolds number flows

Velocity-pressure integrated and consistent penalty finite element computations of high Reynolds number, laminar flows are presented. In both of the methods, the pressure has been interpolated using linear shape functions for a triangular element. The triangular element is contained inside the bi-quadratic isoparametric element. It has been reported previously that the pressure interpolation method, when used in the velocity-pressure integrated method, yielded accurate computational results for high Reynolds number flows. It is shown that use of the same pressure interpolation method in the consistent penalty finite element method yielded accurate velocity and pressure fields which were comparable to those obtained using the velocity-pressure integrated method. Accuracy of the two finite element methods has been demonstrated by comparing the computational results with available experimental data and/or fine-grid finite difference computational results. Advantages and disadvantages of the two methods are discussed on the basis of accuracy and convergence nature. Example problems considered include a lid-driven cavity flow for Reynolds number of 10,000, a laminar backward-facing step flow, a laminar flow through a nest of cylinders, and a channel flow with an internal blockage. A finite element computer program (NSFLOW/P) for the 2-D, incompressible Navier-Stokes equations is also presented.

Kim, Sang-Wook↗

Computational fluid dynamics in aerospace

The status of computational fluid dynamics (CFD) is addressed in terms of methods, examples of CFD solutions, and computer technology. The examples are divided into aerospace applications and fluid physics applications, with the aerospace applications section being further divided into internal and external flows. The role CFD is expected to play in supporting the goals set forth by the Aeronautical Policy Review Committee established by the Office of Science and Technology Policy is noted.

Kutler, Paul↗

A flux-split solution procedure for unsteady inlet flows

The unstart and restart of an axisymmetric inlet is investigated using a flux-split procedure applied to the Euler and Reduced Navier Stokes (RNS) equations. A time consistent direct sparse matrix solver is applied to compute the transient flow field both internal and external to the inlet. Time varying oblique and normal shocks are captured. The code is quite general and is applicable for subsonic, transonic and supersonic free streams. The current analysis is concerned with supersonic flight conditions.

Pordal, H. S.↗

CFD support of NASP design

This paper presents a summary of design studies from the 'open' literature which illustrate the level of effort and the use of computational fluid dynamics (CFD) to support the National Aerospace Plane (NASP) X-30 design. CFD plays a major role in the NASP program, particularly for the very high speed regions (Mach greater than 10) where wind tunnels cannot fully simulate the flow and/or flow-field measurements are difficult to obtain. Full simulation (nose-to-tail analysis) of the NASP flow field, both internal and external, is discussed.

Mcclinton, Charles R.↗

Progress in computing nozzle/plume flow fields

The long-term goal is to develop the capability to predict chemically-reacting, multi-stream nozzle and plume flow fields. Two basic Navier-Stokes solvers, including the widely used F-3D code, are upgraded to include several upwind difference schemes and portable chemistry packages. Current computational capabilities for solving equilibrium single-stream and multi-stream, frozen gas, and finite rate chemistry problems are described. A variety of complex nozzle and plume flows were computed. Solutions presented include axisymmetric plume flow for ideal and equilibrium air, 3-D NASP nozzle/afterbody flow, and an internal nozzle calculation comparing various finite-rate chemistry packages.

Ruffin, Stephen M.↗

A multiblock multigrid three-dimensional Euler equation solver

Current aerodynamic designs are often quite complex (geometrically). Flexible computational tools are needed for the analysis of a wide range of configurations with both internal and external flows. In the past, geometrically dissimilar configurations required different analysis codes with different grid topologies in each. The duplicity of codes can be avoided with the use of a general multiblock formulation which can handle any grid topology. Rather than hard wiring the grid topology into the program, it is instead dictated by input to the program. In this work, the compressible Euler equations, written in a body-fitted finite-volume formulation, are solved using a pseudo-time-marching approach. Two upwind methods (van Leer's flux-vector-splitting and Roe's flux-differencing) were investigated. Two types of explicit solvers (a two-step predictor-corrector and a modified multistage Runge-Kutta) were used with multigrid acceleration to enhance convergence. A multiblock strategy is used to allow greater geometric flexibility. A report on simple explicit upwind schemes for solving compressible flows is included.

Cannizzaro, Frank E.↗

CFD support of NASP design

This paper presents a summary of design studies from the 'open' literature which illustrate the level of effort and the use of computational fluid dynamics (CFD) to support the National Aerospace Plane (NASP) X-30 design. CFD plays a major role in the NASP program, particularly for the very high speed regions (Mach greater than 10) where wind tunnels cannot fully simulate the flow, and flow field measurements are difficult to obtain. Full simulation (nose-to-tail analysis) of the NASP flow field, both internal and external, is discussed.

Mcclinton, Charles R.↗

Low Pressure Nuclear Thermal Rocket (LPNTR) concept

A background and a description of the low pressure nuclear thermal system are presented. Performance, mission analysis, development, critical issues, and some conclusions are discussed. The following subject areas are covered: LPNTR's inherent advantages in critical NTR requirement; reactor trade studies; reference LPNTR; internal configuration and flow of preliminary LPNTR; particle bed fuel assembly; preliminary LPNTR neutronic study results; multiple LPNTR engine concept; tank and engine configuration for mission analysis; LPNTR reliability potential; LPNTR development program; and LPNTR program costs.

Ramsthaler, J. H.↗

Theoretical models for duct acoustic propagation and radiation

The development of computational methods in acoustics has led to the introduction of analysis and design procedures which model the turbofan inlet as a coupled system, simultaneously modeling propagation and radiation in the presence of realistic internal and external flows. Such models are generally large, require substantial computer speed and capacity, and can be expected to be used in the final design stages, with the simpler models being used in the early design iterations. Emphasis is given to practical modeling methods that have been applied to the acoustical design problem in turbofan engines. The mathematical model is established and the simplest case of propagation in a duct with hard walls is solved to introduce concepts and terminologies. An extensive overview is given of methods for the calculation of attenuation in uniform ducts with uniform flow and with shear flow. Subsequent sections deal with numerical techniques which provide an integrated representation of duct propagation and near- and far-field radiation for realistic geometries and flight conditions.

Eversman, Walter↗

A two-dimensional Euler solution for an unbladed jet engine configuration

A two dimensional, nonaxisymmetric Euler solution in a geometry representative of a jet engine configuration without blades is presented. The domain, including internal and external flow, is covered with a multiblock grid. In order to construct this grid, a domain decomposition technique is used to subdivide the domain, and smooth grids are dimensioned and placed in each block. The Euler solution is verified by examining five theoretical properties. The result demonstrates techniques for performing numerical solutions in complex geometries and provides a foundation for complete engine throughflow calculations.

Stewart, Mark E. M.↗

Geometry modeling and multi-block grid generation for turbomachinery configurations

An interactive 3D grid generation code, Turbomachinery Interactive Grid genERation (TIGER), was developed for general turbomachinery configurations. TIGER features the automatic generation of multi-block structured grids around multiple blade rows for either internal, external, or internal-external turbomachinery flow fields. Utilization of the Bezier's curves achieves a smooth grid and better orthogonality. TIGER generates the algebraic grid automatically based on geometric information provided by its built-in pseudo-AI algorithm. However, due to the large variation of turbomachinery configurations, this initial grid may not always be as good as desired. TIGER therefore provides graphical user interactions during the process which allow the user to design, modify, as well as manipulate the grid, including the capability of elliptic surface grid generation.

Shih, Ming H.↗