Nonvolatile Electric-Field Control of Ferromagnetic Resonance and Spin Pumping in Pt/YIG at Room Temperature
Not provided.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not provided.
Solar thermal technologies such as solar hot water and concentrated solar power trough systems rely on spectrally selective solar absorbers. These solar absorbers are designed to efficiently absorb the sunlight while suppressing re-emission of infrared radiation at elevated temperatures. Efforts for the development of such solar absorbers must not only be devoted to their spectral selectivity but also to their thermal stability for high temperature applications. In this work, selective solar absorbers based on two cermet layers are fabricated on mechanically polished stainless steel substrates using a magnetron sputtering technique. The targeted operating temperature is 500–600 °C. A detrimental change in the morphology, phase, and optical properties is observed if the cermet layers are deposited on a stainless steel substrate with a thin nickel adhesion layer, which is due to the diffusion of iron atoms from the stainless steel into the cermet layer forming a FeWO 4 phase. In order to improve thermal stability and reduce the infrared emittance, tungsten is found to be a good candidate for the infrared reflector layer due to its excellent thermal stability and low infrared emittance. Lastly, a stable solar absorptance of ≈0.90 is demonstrated, with a total hemispherical emittance of 0.15 at 500 °C.
We report the activation of platinum catalyst thin films for oxygen reduction reaction in perchloric acid electrolytes when the films are subjected to mechanical stress. The catalysts films were deposited by magnetron sputtering on photosensitive chalcogenide As 20 Se 80 semiconductor glass layer. When platinum films are illuminated by red laser light the glass under semitransparent platinum film exhibits photo-induced flow. The material flow underneath platinum film induces mechanical stress resulting in film wrinkling and significant increase in its catalytic activity.
Platinum is known as the best catalyst for the hydrogen evolution reaction (HER) but the scarcity and high cost of Pt limit its widespread applicability. Herein, the role of the underlying substrate on the HER activity of dispersed Pt atoms is uncovered. A direct current magnetron sputtering technique is utilized to deposit transition metal (TM) thin films of W, Ti, and Ta as underlying substrates for extremely low loading of Pt (<1.5 at%). The electrocatalytic performance of as‐synthesized samples for the HER is examined in both alkali and acidic media. The results show that despite the low loading of Pt, the Pt/TM catalysts produce hydrogen at a rate comparable to that of pristine bulk Pt. Pt/TM catalysts also display good stability with less than 5% decay in performance after 10 h of continuous HER operation. Based on the computational study, the excellent performance is attributed to the modified electronic properties of the Pt atoms, offering ideal binding energy for HER due to interaction with the underlying substrates. This work provides a robust and industry‐friendly route toward designing efficient catalytic systems for important electrochemical reactions such as HER and others.
A soft X-ray, beam-splitting, multilayer optic has been developed for the Bragg Reflection Polarimeter (BRP) on the NASA Gravity and Extreme Magnetism Small Explorer Mission (GEMS). The optic is designed to reflect 0.5 keV X-rays through a 90° angle to the BRP detector, and transmit 2–10 keV X-rays to the primary polarimeter. The transmission requirement prevents the use of a thick substrate, so a 2 μm thick polyimide membrane was used. Atomic force microscopy has shown the membrane to possess high spatial frequency roughness less than 0.2 nm rms, permitting adequate X-ray reflectance. A multilayer thin film was especially developed and deposited via magnetron sputtering with reflectance and transmission properties that satisfy the BRP requirements and with near-zero stress. Furthermore, reflectance and transmission measurements of BRP prototype elements closely match theoretical predictions, both before and after rigorous environmental testing.
Ga–N co-doped ZnO thin films with reduced bandgaps were deposited on F-doped tin-oxide-coated glass by radio-frequency magnetron sputtering at different substrate temperatures in mixed N2 and O2 gas ambient. We found that Ga–N co-doped ZnO films exhibited enhanced crystallinity when compared to undoped ZnO films grown under the same conditions. Furthermore, Ga–N co-doping ensured enhanced N-incorporation ZnO thin films as the substrate temperature is increased. As a result, Ga–N co-doped ZnO thin films exhibited much improved photoelectrochemical (PEC) response, compared to ZnO thin films. Our results therefore suggest that the passive co-doping approach could be a means to improve PEC response for bandgap-reduced wide-bandgap oxides through impurity incorporation.
In situ and ex situ annealed nanotwinned (NT) Ag thin films have been investigated by TEM and tensile testing to reveal the thermal stability of the twin boundaries, grain boundaries, dislocation densities, and their respective influence of the macroscopic yield stress. The NT Ag films synthesized by magnetron sputtering form both coherent (CTB, Σ3{111}) and incoherent (ITB, Σ3{112}) twin boundaries that are thermally stable up to 473 K (200 Celsius), i.e., no obvious changes in grain size, twin spacing, and yield stress. In situ TEM observations show the dislocations become mobile at 453 K (180 Celsius) resulting in dislocation annihilation primarily at twin and grain boundaries. Rotation of grains with low-angle grain boundaries was observed during in situ heating, resulting in the growth of columnar grains above 453 K (180 Celsius). However, no noticeable changes in the spacings of CTBs were observed during the entire in situ and ex situ annealing [up to 873 K (600 Celsius)]. The increase in grain size and concomitant decrease in yield stress following annealing at various temperatures can be described by the Hall-Petch relationship, demonstrating that grain size rather than twin spacing is most sensitive to thermal annealing and plays a dominant role in the deformation of NT Ag films.
Hard and optically transparent nanocomposite Al-Si-N thin films were deposited using DC magnetron sputtering at different process parameters. There was a significant effect of these parameters on the film properties affecting its mechanical and optical behavior. The nitrogen content or pressure, deposition pressure and substrate temperature strongly influence the phase formation which governs the hardness and optical transparency of the coating. Hardness was measured between 18 and 30 GPa. The band gap could be varied in the range of 3.8-4.2 eV by varying nitrogen pressures in the chamber during deposition. The films showed (0-80)% transparency in UV and visible region depending on the sputtering conditions.
Multi-component CrTiAlCN coatings with different carbon contents were deposited on AISI M2 high-speed steels using unbalanced magnetron sputtering via adjusting the C{sub 2}H{sub 2} flow rates, and their microstructures and mechanical properties were characterized by using SEM, EDS, XRD, Vickers hardness tester and scratch tester, respectively. The tribological properties of CrTiAlCN coatings sliding against SUS440C high carbon martensitic balls were performed using ball-on-disk tribo-tester. The results showed that CrTiAlCN coatings were mainly comprised of (111) and (200) crystal orientation. The maximum hardness of coatings was 29.4 ± 1.5 GPa as the carbon content was 22.5 at.%. With an increase in the carbon content of coatings, the friction coefficients and wear rates of CrTiAlCN/SUS440C tribo-pairs were significantly reduced, and the wear mechanism of coatings changed from adhesive wear to abrasive wear.
The objective of the present paper is to study the influence of the substrate bias voltage on the microstructure, composition, deposition rate, tribological and corrosion properties of CrN coatings obtained by DC magnetron sputtering on 90CrMoV8 steel and Si (100) substrates. The substrate bias voltage varied from 0 to − 700 V. The deposited films were characterized by SEM, XRD and potentiodynamic polarization. The wear behavior and coefficient of friction were determined and investigated after rotative tribometer tests. The results indicated that the substrate bias voltage considerably affected the intrinsic properties of the CrN films. Indeed, it significantly influenced the grain size and the root-mean-squared roughness which varied from 20 to 29 nm, and from 9 to 19 nm, respectively, when polarization changed from 0 to − 700 V. All the CrN coatings have a dense columnar structure and are well crystallized according to the XRD analyses. Nevertheless, it has been shown that the peaks intensity decreased by increasing the substrate bias voltage. By applying a substrate bias voltage, it was obvious that the friction behavior was enhanced, and the wear volume was decreased. Finally, the CrN coating obtained under a substrate bias voltage of − 500 V presented the best corrosion resistance and wear resistance probably due to its dense microstructure.
Chromium tungsten nitride (CrWN) films were deposited onto SUS 304 stainless steel, cutter inserts and glass substrates using direct current reactive magnetron sputtering, with pure W and Cr metal targets. The deposition parameters for the interlayer (W and WN) with multiple qualities were optimized using the gray Taguchi method. The microstructure of these coatings was determined using x-ray diffraction, scanning electron microscopy, energy dispersive spectroscopy and transmission electron microscopy. The results showed that the mechanical properties of bilayer samples with an interlayer of WN nitride film are superior to those with a W metal interlayer. Moreover, increasing the N{sub 2}/(N{sub 2} + Ar) flow ratio and working pressure enhanced the microhardness and the elastic recovery for coatings with an interlayer/CrWN bilayer. Dry milling tests also showed that bilayer film coatings have better mechanical performance. This increase in multiple performance characteristics is attributed to a bilayer that is manufactured using the gray Taguchi method. Control charts, which are powerful tools and widely used, were employed to monitor and ensure high-quality fabrication of the interlayer/CrWN bilayer and to show the coating processes to be stable and well regulated.
A dense Al{sub 2}O{sub 3} interlayer was inserted into TiN to enhance the tribological and anti-corrosion properties of TiN hard coating via a hybrid process of magnetron sputtering and atomic layer deposition (ALD). The influence of the ALD-Al{sub 2}O{sub 3} layer on the microstructure, mechanical, tribological and anti-corrosion properties of TiN was examined. The TiN-Al{sub 2}O{sub 3} coating exhibits low friction coefficient and specific wear rate, due to the structure change and columnar refinement caused by the addition of amorphous ALD-Al{sub 2}O{sub 3} interlay which improves the mechanical properties of hard coating. The improved corrosion properties of TiN are attributed to the fact that the insulating ALD-Al{sub 2}O{sub 3} used as a sealing layer can prevent the corrosive chlorine ions migrating into the lower TiN layer and block the charge transport in coatings. Moreover, raising the insertion position of ALD-Al{sub 2}O{sub 3} layer away from the steel substrate results in a further increase in the anti-corrosion property of TiN-Al{sub 2}O{sub 3} composite coating.
Abstract not provided
Nanostructured crystalline/amorphous metallic multilayers have been increasingly studied due to their high strength and potential enhancement of plasticity in amorphous metals. Here we report on mechanical behaviors of Cu/amorphous CuNb multilayers that were prepared by magnetron sputtering with equal individual layer thickness (h) varying from 1 to 200 nm. A medium-range-order amorphous CuNb layer formed between Cu and amorphous CuNb layers. This intermediate layer facilitates transmission of plasticity from Cu to amorphous layers by preventing the smear of dislocation core on the interface. The maximum hardness of Cu/amorphous CuNb multilayers is achieved when h ≤ 50 nm, and is much lower than the hardness of single-layer amorphous CuNb films. Molecular dynamics simulations show that, comparing with single-layer amorphous CuNb, the pile-up of dislocations in Cu layers lowers the stress for the activation of shear transformation zones in amorphous CuNb layers in multilayers.
Al/SiC nanolaminates with equal nominal thicknesses of the Al and SiC layers (10, 25, 50 and 100 nm) were manufactured by magnetron sputtering. The mechanical properties were measured at 25 °C and 100 °C by means of nanoindentation and micropillar compression tests and the deformation mechanisms were analyzed by in situ micropillar compression tests in the transmission electron microscope. In addition, finite element simulations of both tests were carried out to ascertain the role played by the strength of the Al layers and by the elastic constraint of the ceramic layers on the plastic flow of Al in the mechanical response. It was found that the mechanical response was mainly controlled by the constraint during nanoindentation or micropillar compression tests of very thin layered (≈10 nm) laminates, while the influence of the strength of Al layers was not as critical. This behavior was reversed, however, for thick layered laminates (100 nm). Here, these mechanisms point to the different effects of layer thickness during nanoindentation and micropillar compression, at both temperatures, and showed the critical role played by constraint on the mechanical response of nanolaminates made of materials with a very large difference in the elasto-plastic properties.
Cr-coated zirconium alloys represent a modern approach to enhance cladding safety during accident scenarios. Two high-power impulse magnetron sputtered Cr-coated Zry-4 systems were subjected to simulated loss-of-coolant accident conditions to investigate cladding performance. The first Cr-coating (4.8 µm thick) was deposited onto Zry-4 cladding and exhibited through-thickness cracking while the second Cr-coating (6.8 µm thick) was deposited with improved deposition parameters onto polished Zry-4 and exhibited no cracking. During burst testing, the coating with a higher density of defects failed to consistently reduce oxidation and exhibited similar burst behavior as Zry-4. In contrast, the second Cr-coating reduced ZrO 2 formation through formation of Cr 2 O 3 and displayed enhanced burst temperatures by ~80 °C compared to Zry-4. Utilizing an empirical relation for burst behavior of zirconium alloys, the 6.8 µm Cr/Zry-4 system displayed enhanced burst temperatures equivalent to an effective 0.464 mm increase in Zry-4 wall thickness, highlighting the value of continuous Cr coatings for accident scenarios.
Structure characterization of Sb/B 4 C multilayers for soft X-ray optics with a layers thickness from 0.5 nm to 7 nm is reported for the first time. Sb/B 4 C coatings were manufactured via magnetron sputtering. Amorphous and crystalline phases of the layers and the multilayer structure parameters were characterized with the X-ray diffraction data and the TEM data. The Sb/B 4 C multilayers demonstrated long term stability of their parameters and performances. The reached value of the reflectance of the Sb/B 4 C multilayers is 19–28% measured at the near-normal incidence in the wavelength range of 6.64–8.5 nm. The influence of reduced Sb density on the reflectivity is discussed.
L1(0) FePt thin films with an island-like morphology and magnetic perpendicular anisotropy were grown at low temperature (300 < T-dep< 375 degrees C) by magnetron sputtering on Hoya glass substrates using a 30-nm thick Cr (2 0 0) underlayer. An MgO buffer layer with a thickness of 2 nm was used to inhibit the diffusion from the Cr underlayer and promote the growth of (0 0 1) oriented L1(0) FePt films by inducing an in-plane lattice distortion. By varying the substrate temperature and the Ar sputter pressure (3.5 < P-Ar< 15 mTorr) during the deposition, the degree of chemical order, the microstructure and the magnetic properties were tuned and the best properties in term of squareness ratio (M-r/M-s similar to 0.95) and coercive field (H-c similar to 14 kOe) were observed for films deposited at T-dep = 350 degrees C and P-Ar= 5 mTorr, due to the appearance of a tensile strain, which favors the perpendicular anisotropy. The analysis of the angular dependence of remanent magnetization curves on the optimized sample suggests that the magnetization reversal is highly incoherent due to the inter-island interactions. Our results provide useful information on the low temperature growth of FePt films with perpendicular anisotropy onto glass substrates, which are relevant for a variety of technological applications, such as magnetic recording and spintronic devices. (C) 2015 Elsevier B.V. All rights reserved.