Search NASA⌕ Search

SEARCH · Search NASA

Results for “MITIGATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Mitigation of rapid capacity decay in silicon-LiNi 0.6 Mn 0.2 Co 0.2 O 2 full batteries

Silicon (Si)-based materials have been considered as the most promising anode materials for high-energy-density lithium-ion batteries because of their higher storage capacity and similar operating voltage, as compared to the commercial graphite (Gr) anode. But the use of Si anodes including silicon-graphite (Si-Gr) blended anodes often leads to rapid capacity decay in Si-Gr/LiNixMnyCo z O 2 (x+y+z=1) full cells, which has been attributed to surface instability of the Si component. In addition to stabilizing the surface, this work investigates the potential of the Si-Gr blended anodes in a full-cell configuration and its impact on the capacity contribution from active components. Using dQ/dV plots of the full cells, a powerful but simple-to-implement differential potential approach is developed to decouple the capacity contribution and degradation from the graphite and silicon components. Data collected from three-electrode cells confirm the results from the differential potential approach, which suggests a voltage slippage to a higher voltage at the blended anode side. Additionally, the voltage slippage causes a reduced utilization of the Gr component and exacerbates side reactions between the Si-Gr anode and carbonate electrolytes. Furthermore, based on these failure mechanisms, we adopted a mitigation strategy to tune the open circuit voltage of the prelithiated anode while stabilizing the surface. As a result, the full cells with the modified Si-Gr anodes (mass loading, 2.5 mAh/cm 2 ) offer a highly reversible full-cell energy density of 390 Wh/kg (based on the mass of both anode and cathode materials in a full cell) with a cycling CE of 99.9% over 200 cycles.

25 ENERGY STORAGE↗

Odor mitigation and bacterial community dynamics in on-site biocovers at a sanitary landfill in South Korea

Highlights: • On-site biocovers were evaluated to mitigate odors at a Korean sanitary landfill. • The biocover systems achieved above 80% removal of complex odor. • Removal efficiency of sulfur odor as significant contributor was greater than 90%. • The most abundant bacteria had little correlation with odor removability. • Bacteria increased in relative abundance contributed highly to odor removal. Unpleasant odors emitted from landfills have been caused environmental and societal problems. For odor abatement, two pilot-scale biocovers were installed at a sanitary landfill site in South Korea. Biocovers PBC1 and PBC2 comprised a soil mixture with different ratios of earthworm casts as an inoculum source and were operated for 240 days. Their odor removal efficiencies were evaluated, and their bacterial community structures were characterized using pyrosequencing. In addition, the correlation between odor removability and bacterial community dynamics was assessed using network analysis. The removal efficiency of complex odor intensity in the two biocovers ranged from 81.1% to 97.8%. Removal efficiencies of sulfur-containing odors (hydrogen sulfide, methanethiol, dimethyl sulfide, and dimethyl disulfide), which contributed most to complex odor intensity, were greater than 91% in both biocovers. Despite the fluctuations in ambient temperature (−8.2 to 31.3 °C) and inlet complex odor intensity (10,000–42,748 of odor dilution ratio), biocovers PBC1 and PBC2 displayed stable deodorizing performance. A high ratio of earthworm casts as an inoculum source led to high odor removability during the first 25 days of operation, but different mixing ratios of earthworm casts did not significantly affect overall odor removability. A bacterial community analysis showed that Methylobacter, Arthrobacter, Acinetobacter, Rhodanobacter, and Pedobacter were the dominant genera in both biocovers. Network analysis results indicated that Steroidobacter, Cystobacter, Methylosarcina, Solirubrobacter, and Pseudoxanthomonas increased in relative abundance with time and were major contributors to odor removal, although these bacteria had a relatively low abundance compared to the overall bacterial community. These data contribute to a more comprehensive understanding of the relationship between bacterial community dynamics and deodorizing performance in biocovers.

54 ENVIRONMENTAL SCIENCES↗

CFD modeling of non-catalytic, partial-oxidation engine reformer for flare mitigation

Flaring associated natural gas is commonly employed in the oil and gas industry to reduce methane (CH 4 ) emissions but generates carbon dioxide (CO 2 ) and harmful pollutants, significantly contributing to air pollution and posing risks to public health. To mitigate this impact, M2X Energy Inc. has developed a small-scale, modular gas-to-methanol system. This system features an engine reformer that performs fuel-rich partial oxidation of wellhead gas to produce syngas—a mixture of carbon monoxide (CO) and hydrogen (H 2 )—followed by a downstream reactor for methanol synthesis. This study focused on computational fluid dynamics (CFD) modeling of the engine reformer to simulate partial oxidation chemistry, predict the rich-burn operating limit, and assess syngas quality, ultimately aiding in design and operational optimization. The CFD model, developed within a Reynolds-Averaged Navier-Stokes (RANS) turbulence framework, incorporated sub-models for turbulent combustion, a chemical mechanism with polycyclic aromatic hydrocarbon (PAH) pathways, and soot emissions to accurately capture the fuel-rich, turbulent jet ignition and combustion processes. Model validation against experimental data showed good agreement across pre- and main-chamber pressures, apparent heat release rates, and exhaust gas concentrations of key species (H 2 , CO, CO 2 , CH 4 ) for varying intake equivalence ratios. Here, the model identified a rich-burn operating limit near a fuel-air equivalence ratio of 2.35, consistent with experimental observations. Furthermore, syngas quality analysis revealed that extending the rich-burn limit through engine reformer optimization could enhance syngas production, contributing to higher methanol synthesis efficiency.

Computational Fluid Dynamics↗

Soil temperature mitigation due to vegetation biophysical feedbacks

Understanding the interactions between temperature regimes and vegetation cover is one of the key scientific topics in global environmental change and land surface process research. Recently, the prominent global greening trend has inspired considerable interest in examining climate feedbacks to vegetation changes. However, the impacts of recent widespread vegetation cover changes on soil temperature have been less documented and have received insufficient attention. Here, a high-resolution regional climate model was used to examine the potential impact of vegetation cover changes over the past 37 years, obtained as satellite observational data, on regional air and soil temperatures across the Heilong-Amur River Basin. Our sensitivity experiments indicated that the 1.85% increase in the regional fractional vegetation cover (FVC) from 1982 to 2018 cooled the air temperature by 0.045°C and the soil temperature by 0.19°C and that this cooling effect would continue in the near future, from 2016-2018 to 2051-2053. We found that soil temperatures were more sensitive to vegetation cover changes than air temperatures, particularly in mid-high latitude forest ecosystems; this finding helps to explain the nonsignificant decrease in soil temperatures in forest ecosystems over the past 40 years detected in the ERA5-Land reanalysis. Further, our results also suggest that vegetation restoration in forest ecosystems could mitigate the effects of climate change on permafrost environments by increasing the number of soil freezing days.

54 ENVIRONMENTAL SCIENCES↗

Mitigation and characterization of crosstalk between laser-driven radiography sources

Radiography with multiple probe species offers the potential to extract additional information about a given object as compared to radiography with a single probe species. Notably, the flexibility for high-power, short-pulse lasers to accelerate a variety of particle species makes laser-driven sources an attractive option to achieve multi-probe radiography. However, crosstalk produced by each of laser-driven source may be responsible for substantial backgrounds on detectors, becoming a significant barrier to achieving simultaneous radiography. In this work, we describe measurements of and mitigation strategies against crosstalk between laser-driven radiography sources in experiments at the OMEGA EP laser.

47 OTHER INSTRUMENTATION↗

Changes in the wettability of polymer electrolyte fuel cells components during cationic contamination and mitigation

Foreign cations are shown to cause mass transport losses, in particular due to wettability changes in the micro-porous layers (MPL) and the carbon paper substrate, and have a major impact on the durability and the performance of polymer electrolyte fuel cells. Here we studied the effects of cationic impurities on fuel cell system performance, especially on the water management by employing in-situ and ex-situ contamination methods. Changes in the wettability of the carbon paper surface following the in-situ contamination injection were quantified using the Wilhelmy plate method. The CaSO 4 precipitation on the macro-pores of the carbon paper substrate after the contamination injection causes a higher wettability leading to increased flooding of the carbon paper substrate and consequent mass transport losses. An ex-situ cleaning with an acid solution is shown to be very effective in removing the salt deposits of the carbon paper substrate. During the mitigation, the highly hydrophobic MPL acts as a barrier to the transport of the recovery solution into the membrane-electrode assembly (MEA), therefore isopropanol (IPA) was added to both the contaminant solution and the recovery solution to increase the wettability of the MPL. Wetting force measurements confirm that the added IPA can alter the wettability of the MPL and can render it fully hydrophilic, enabling the transport of the recovery solution into the MEA.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Visualization, understanding, and mitigation of process-induced-membrane irregularities in gas diffusion electrode-based polymer electrolyte membrane fuel cells

Polymer electrolyte membrane fuel cells (PEMFC) show substantial promise for their application in electric vehicles. For large-scale manufacturing of PEMFCs, roll-to-roll coated gas-diffusion-electrodes (GDE) offer certain advantages over other production pathways. Procedures including hot pressing and coating an ionomer overlayer may be necessary for this manufacturing pathway to enable a suitable catalyst layer/membrane interface. The same procedures may potentially introduce membrane irregularities, especially when thin membranes are used. Limited understanding exists regarding if and to what extent such irregularities impact PEMFC performance and lifetime, and therefore be considered defects. In this study, NREL's customized fuel cell hardware that enables quasi in-situ infrared (IR) thermography studies was utilized to visualize spatial hydrogen crossover and identify membrane irregularities that originated from the GDE-based MEA fabrication process. The structure of these membrane irregularities was investigated by scanning electron microscopy (SEM) and its impact on initial H2/air performance was determined. Accelerated stress testing (AST) revealed that these irregularities develop into failure point locations. These results were validated across many MEAs with identified process-induced membrane irregularities. By selecting specific gas diffusion media properties and by fine tuning the MEA hot pressing parameters, the formation of such membrane irregularities was mitigated.

08 HYDROGEN↗

Controlled thermal pre-treatment of ZMG232G10® for corrosion mitigation under simulated SOFC interconnect exposure conditions

The IT-SOFC candidate interconnect material ZMG232G10® was thermally pre-treated in air and in H 2 – 3% H 2 O to mitigate dual atmosphere corrosion. Bare and pre-treated steel samples were exposed to a dual atmosphere exposure condition (dry air/metal/4% H 2 – N 2 (bal.) + 3% H 2 O) for 500h at 600°C. Corrosion products and oxide morphology developed on the air-exposed surfaces were analyzed. Pre-treatments of the metal in oxidizing (air) and reducing (H 2 – 3% H 2 O) gas atmospheres provide improved passivation against dual atmosphere corrosion compared to bare steel. Further, the uniform and iron-free oxide scale developed during the pre-treatment of alloy in the low pO 2 H 2 – 3% H 2 O gas atmosphere provides an effective diffusion barrier against the outward transport of cations and oxidation of iron observed under dual atmosphere conditions.

36 MATERIALS SCIENCE↗

Operational and scaling-up barriers of SOEC and mitigation strategies to boost H 2 production- a comprehensive review

Solid oxide electrolysis cells (SOECs) proffer a flexible and environmentally friendly solution to reduce CO 2 emissions and/or produce H 2 fuel for various applications. Here, the integration of this technology with renewable energy systems makes them even more promising in realizing a near-perpetual green energy infrastructure in the near future. SOEC technology has achieved stupendous improvement in recent years, and some of the limiting factors to the commercialization of this technology have been explored. It is, therefore, necessary to have a succinct outlook of the different factors that contribute to the recent developments in SOEC technology. The current work presents a comprehensive review of the state-of-the-art SOEC component materials and their degradation mechanisms, SOEC modeling essentials and efficiencies, and the scalability of SOECs. Although SOEC is considered a highly promising technology and sufficient multifaceted research has been done, yet not been widely commercialized. Despite the improvement to mitigate degradation of the SOEC materials, a large share of the degradation concerns sprang from charge transfer reaction at the triple-phase boundaries of the H 2 -electrode. Part of which can be improved by microkinetic modeling of these materials supported by their characterization to give insight into their development. Some other directions for the future in advancing this technology toward the commercialization stage are thoroughly addressed.

08 HYDROGEN↗

Phenylbutyrate Mouthwash Mitigates Oral Mucositis During Radiotherapy or Chemoradiotherapy in Patients With Head-and-Neck Cancer

Purpose: Deleterious oral mucositis (OM) develops during radiotherapy (RT) or chemoradiotherapy for head-and-neck cancer (HNC) patients. There are currently no effective cytoprotective treatments for OM without a potential risk of tumor protection. This randomized, double-blind, placebo-controlled pilot study aimed to determine the therapeutic safety and efficacy of phenylbutyrate (an antitumor histone deacetylase inhibitor and chemical chaperone) 5% mouthwash for treating OM caused by cancer therapy. Methods and Materials: Between September 2005 and June 2006, 36 HNC patients were randomized to standard oral care plus 5 mL of either phenylbutyrate 5% mouthwash (n = 17) or placebo (mouthwash vehicle, n = 19) taken four times daily (swish and spit). Treatment began when mild mucositis (Radiation Therapy Oncology Group Grade 1) occurred, and ended 4 weeks after RT completion. Safety and efficacy were based on adverse events, physical examination, laboratory determinations, vital signs, Oral Mucosa Assessment Scale (OMAS) and World Health Organization scores, the ability to eat, body weight change, local control, and survival. Results: We found no severe drug-related side effect. At RT doses of 5500-7500 cGy, phenylbutyrate significantly mitigated the severity of mucositis compared with placebo, based on both the WHO score (severity {>=} 3; p = 0.0262) and the OMAS scale (ulceration score {>=} 2; p = 0.0049). The Kaplan-Meier estimates for 2- and 3-year local control, and overall survival were 100% and 80.8%, and 78.6% and 64.3%, respectively, in the phenylbutyrate group and 74.2% and 74.2%, and 57.4% and 50.2%, respectively, in the placebo group. Conclusions: This pilot trial suggested that phenylbutyrate mouthwash significantly decreased the impact of OM in HNC patients receiving RT or chemoradiotherapy and did not confront the tumor control. Larger Phase II randomized trials are needed to confirm these results.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Mammalian Target of Rapamycin Inhibition With Rapamycin Mitigates Radiation-Induced Pulmonary Fibrosis in a Murine Model

Purpose: Radiation-induced pulmonary fibrosis (RIPF) is a late toxicity of therapeutic radiation. Signaling of the mammalian target of rapamycin drives several processes implicated in RIPF, including inflammatory cytokine production, fibroblast proliferation, and epithelial senescence. We sought to determine if mammalian target of rapamycin inhibition with rapamycin would mitigate RIPF. Methods and Materials: C57BL/6NCr mice received a diet formulated with rapamycin (14 mg/kg food) or a control diet 2 days before and continuing for 16 weeks after exposure to 5 daily fractions of 6 Gy of thoracic irradiation. Fibrosis was assessed with Masson trichrome staining and hydroxyproline assay. Cytokine expression was evaluated by quantitative real-time polymerase chain reaction. Senescence was assessed by staining for β-galactosidase activity. Results: Administration of rapamycin extended the median survival of irradiated mice compared with the control diet from 116 days to 156 days (P=.006, log-rank test). Treatment with rapamycin reduced hydroxyproline content compared with the control diet (irradiation plus vehicle, 45.9 ± 11.8 μg per lung; irradiation plus rapamycin, 21.4 ± 6.0 μg per lung; P=.001) and reduced visible fibrotic foci. Rapamycin treatment attenuated interleukin 1β and transforming growth factor β induction in irradiated lungs compared with the control diet. Type II pneumocyte senescence after irradiation was reduced with rapamycin treatment at 16 weeks (3-fold reduction at 16 weeks, P<.001). Conclusions: Rapamycin protected against RIPF in a murine model. Rapamycin treatment reduced inflammatory cytokine expression, extracellular matrix production, and senescence in type II pneumocytes.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

CBP/P300 Inhibitors Mitigate Radiation-Induced GI Syndrome by Promoting Intestinal Stem Cell-Mediated Crypt Regeneration

Radiation-induced gastrointestinal syndrome (RIGS) is currently the main cause of death for people exposed to a high dose of irradiation during nuclear incidents, and there is currently no approved effective therapy. Here, we found that CBP/P300 inhibitors, with high efficacy and low toxicity, might be promising radiation mitigators that can cure RIGS.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Holocene cold storage practices on the eastern Snake River Plain: A risk-mitigation strategy for lean times

Previous archaeological research in southern Idaho has suggested that climate change over the past 8000 years was not dramatic enough to alter long-term subsistence practices in the region. However, recent isotopic analyses of bison remains from cold storage caves on the Snake River Plain contest this hypothesis. Our results, when examined against an archaeoclimate model, suggest that cold storage episodes coincided with drier, warmer phases that likely reduced forage and water, and thus limited the availability of bison on the open steppe. Within this context we build a risk model to illustrate how environment might have motivated cold storage behaviors. Caching bison in cold lava tubes would have mitigated both intra-annual and inter-annual food shortages under these conditions. This analysis also suggests that skeletal fat, more than meat, may have influenced the selection, transport and storage of bison carcass parts. We deciphered when and how cold storage caves which was used to provide a more comprehensive understanding of foraging behaviors in a broad range of hunting-gathering economies.

54 ENVIRONMENTAL SCIENCES↗

Evaluating CO 2 mitigation strategies in SAF biorefineries: Techno-economic and life cycle analysis

The aviation sector requires scalable decarbonization strategies, and lignocellulosic sustainable aviation fuel (SAF) represents a promising pathway. This study comparatively evaluates the techno-economic analysis and life cycle assessment (LCA) of three CO 2 management strategies integrated within a U.S.-based gasification–Fischer–Tropsch SAF biorefinery: (i) catalytic hydrogenation of captured CO 2 to methanol, (ii) geological CO 2 sequestration, and (iii) mineralization to sodium bicarbonate (NaHCO 3 ). Techno-economic analysis indicates that methanol synthesis requires approximately 26% higher capital investment and 33% higher operating costs than mineralization. Although methanol co-production generates the highest gross revenue, NaHCO 3 production reduces the SAF minimum selling price by approximately 38% relative to both methanol synthesis and geological sequestration pathways, reflecting a more balanced cost allocation through mineral co-product valorization. Geological sequestration lowers operating costs by nearly 50% compared with methanol synthesis but remains highly dependent on carbon credit mechanisms. LCA reveals substantial divergence in climate performance. Relative to methanol synthesis, sequestration improves net greenhouse gas performance by approximately 163%, transitioning the system from net-positive to net-negative emissions. Mineralization further enhances carbon mitigation, achieving roughly 85% greater carbon reduction than sequestration and over sixfold improvement relative to methanol synthesis within the defined system boundary. Sensitivity analysis identified hydrogen price, co-product market value, and process emissions as dominant drivers. Under baseline assumptions, CO 2 mineralization is found to offer the most balanced pathway.

Carbon capture and storage↗

Towards extreme fast charging of 4.6V LiCoO 2 via mitigating high-voltage kinetic hindrance

High-voltage LiCoO 2 (LCO) is an attractive cathode for ultra-high energy density lithium-ion batteries (LIBs) in the 3C markets. However, the sluggish lithium-ion diffusion at high voltage significantly hampers its rate capability. Herein, combining experiments with density functional theory (DFT) calculations, we demonstrate that the kinetic limitations can be mitigated by a facial Mg 2+ +Gd 3+ co-doping method. The as-prepared LCO shows significantly enhanced Li-ion diffusion mobility at high voltage, making more homogenous Li-ion de/intercalation at a high-rate charge/discharge process. The homogeneity enables the structural stability of LCO at a high-rate current density, inhibiting stress accumulation and irreversible phase transition. When used in combination with a Li metal anode, the doped LCO shows an extreme fast charging (XFC) capability, with a superior high capacity of 193.1 mAhg -1 even at the current density of 20C and high-rate capacity retention of 91.3% after 100 cycles at 5C. In conclusion, this work provides a new insight to prepare XFC high-voltage LCO cathode materials.

25 ENERGY STORAGE↗

Historic and modern approaches for discovery of abandoned wells for methane emissions mitigation in Oil Creek State Park, Pennsylvania

Hundreds of oil wells were drilled along Oil Creek in Pennsylvania in the mid-16 1800s, birthing the modern oil industry. No longer in operation, many wells are now classified as abandoned, and, due to their age, their locations are either unknown or inaccurately recorded. These historic well sites present environmental, safety, and economic concerns in the form of possible methane leaks and physical hazards. Airborne magnetic and LiDAR surveys were conducted in the Pioneer Run watershed in Oil Creek State Park to find abandoned wells in a historically significant but physically challenging location. Wells were drilled in this area prior to modern geolocation and legal documentation. Although a large number of old wells were abandoned summarily without remediation of the site, much of the land area within Oil Creek State Park is now covered in trees and dense underbrush, which can obscure wellheads. The thick vegetation and steep terrain limited the possibility of ground-based surveys to easily find well sites for methane emissions studies. The data from remote sensing surveys were used to corroborate potential well locations from historic maps and photographs. Potential well sites were verified in a ground-based field survey and monitored for methane emissions. Two historic photographs documenting oil activity in the late 1800s were georeferenced using a combination of magnetic and LiDAR data. LiDAR data, which were more useful in georeferencing and in field verification, identified 290 field locations in the Pioneer Run watershed, 86% of which were possible well sites. Sixty-two percent of the ground-verified wells remained unplugged and comprised the majority of leaking wells. The mean methane emissions factor for unplugged wells was 0.027 ± 0.099 kg/day, lower than other Appalachian Basin methane emissions estimates. LiDAR was used for the first time, in combination with an airborne magnetic survey, to reveal underground oil industry features and inform well identification and remediation efforts in difficult-to-navigate regions. In the oldest oil fields, where well casing has been removed or wood conductor casing was installed, historic photographs provide additional lines of evidence for oil wells where ground disturbances have concealed surface features. Identification of well sites is necessary for mitigation efforts, as unplugged wells emit methane, a potent greenhouse gas.

02 PETROLEUM↗

Method for identification of redox control parameters for corrosion mitigation in molten fluoride salts

Structural material corrosion is a significant concern for the development of molten salt-cooled reactors (MSR) and redox control was proposed to mitigate the corrosion. This study presents an efficient approach to identify the partial pressure of F 2 gas for fluorine driven corrosion, the concentration ratios of UF 4 /UF 3 and ZrF 4 /ZrF 2 , and the partial pressure ratio of HF/H 2 needed to limit metal corrosion and its subsequent dissolution in molten fluoride salts. The identification procedure is made by simply using auxiliary axes in Ellingham diagrams. This approach greatly simplifies the optimization of redox control methods in studying the material corrosion in molten salts.

36 MATERIALS SCIENCE↗