Search NASA⌕ Search

SEARCH · Search NASA

Results for “Memory device”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

High-Resolution Full-Field Structural Microscopy of the Voltage-Induced Filament Formation in VO 2 -Based Neuromorphic Devices

In order to make neuromorphic functions in memristive devices more efficient, information about the structural properties of filament formation at the micro- and mesoscopic scales is necessary. Despite extensive research on VO 2 , a key material due to its filament formation, local operando structural measurements remain challenging and often involve destructive specimen preparation and long rastering times, greatly limiting the scope of experimental studies. Utilizing dark-field X-ray microscopy (DFXM), a fullfield imaging modality, structural signatures of the filament formation process operando are revealed in VO 2 devices. DFXM experiments illustrate that rutile filaments contain isolated monoclinic clusters, indicating structural nonuniformity interior to the filament. The formation of the rutile phase beneath device electrodes was shown to precede filament development, followed by the formation of filament paths guided by nucleation sites within the device. Finally, a medium-term (<30 min) memory mechanism is observed in VO 2 , mediated by sites within the device gap that tend to switch at significantly lower voltages after electrical cycling, a tendency that persists through a brief thermal reset. High spatial resolution, large field-of-view, structure selectivity, and fast signal acquisition of DFXM provided insight into structural features of the filamentary channel and surrounding regions during voltage cycling.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

EmSense: A High-Resolution Emulated Sensor for Experiments with the Smart Grid and Distributed Ledger Technology

This work involves the development of a device - EmSense (“Emulated Sensor”) - that emulates a high-resolution sensor for a power grid. The device collects raw current and voltage sensor data which derive from ORNL's signature library. This library is a dataset that ORNL curates from many different sources that include power systems from various utilities. The EmSense packages the data from the library in the form of IEC 61850 Sampled Value (SV) packets and then broadcasts these SV packets on the network. In another mode, EmSense can generate artificial sinusoidal data that appears as waveforms for voltage and current signals. EmSense has an internal algorithm for determining the period of a signal based on the data so that the period can be specified as a variable in the IEC 61850 packets. The purpose of EmSense is to allow for experimentation with the Dark Net Infrastructure where a variety of power line sensors must be represented along with their typical communication traffic. The EmSense device was developed in coordination with the software for receiving and processing the packets in the Distributed Ledger Technology (DLT) framework of the DarkNet Project. This receiving software must have a methodology for dealing with information of high velocity, variety, and volume. Experimenting with EmSense facilitates the development of such software. The results showed that the DLT framework and the trust-anchoring approach managed to process a large flow of traffic even with up to six instances of EmSense device broadcasting data. This was achieved without overfilling packet queues in the memory of the actual hardware of the DLT devices or causing the Central Processing Unit (CPU) of the hardware to be overwhelmed. The DLTs were also able to store the data in a compact and useful form for later analysis and archival purposes.

Werth, Aaron↗

Dynamics and manipulation of ferroelectric domain walls in bismuth ferrite thin films

Abstract Ferroelectric domain walls differ from domains not only in their crystalline and discrete symmetry, but also in their electronic, magnetic, and mechanical properties. Although domain walls provide a degree of freedom to regulate the physical properties at the nanoscale, the relatively lower controllability prevents their practical applications in nano-devices. In this work, with the advantages of 3D domain configuration detection based on piezoresponse force microscopy, we find that the mobility of three types of domain walls (tail-to-tail, head-to-tail, head-to-head) in (001) BiFeO3 films varies with the applied electrical field. Under low voltages, head-to-tail domain walls are more mobile than other domain walls, while, under high voltages, tail-to-tail domain walls become rather active and possess relatively long average lengths. This is due to the high nucleation energy and relatively low growth energy for charged domain walls. Finally, we demonstrate the manipulation of domain walls through successive electric writings, resulting in well-aligned conduction paths as designed, paving the way for their application in advanced spintronic, memory and communication nano-devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Strong quantitative benchmarking of quantum optical devices

Quantum communication devices, such as quantum repeaters, quantum memories, or quantum channels, are unavoidably exposed to imperfections. However, the presence of imperfections can be tolerated, as long as we can verify that such devices retain their quantum advantages. Benchmarks based on witnessing entanglement have proven useful for verifying the true quantum nature of these devices. The next challenge is to characterize how strongly a device is within the quantum domain. We present a method, based on entanglement measures and rigorous state truncation, which allows us to characterize the degree of quantumness of optical devices. This method serves as a quantitative extension to a large class of previously known quantum benchmarks, requiring no additional information beyond what is already used for the nonquantitative benchmarks.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Wireless Infrastructure for Performing Monitoring, Diagnostics, and Control HVAC and Other Energy-Using Systems in Small Commercial Buildings

This project focused on developing a low-cost wireless infrastructure for monitoring, diagnosing, and controlling building systems and equipment. End users receive information via the Internet and need only a web browser and Internet connection. The system used wireless communications for: (1) collecting data centrally on site from many wireless sensors installed on building equipment, (2) transmitting control signals to actuators and (3) transmitting data to an offsite network operations center where it is processed and made available to clients on the Web (see Figure 1). Although this wireless infrastructure can be applied to any building system, it was tested on two representative applications: (1) monitoring and diagnostics for packaged rooftop HVAC units used widely on small commercial buildings and (2) continuous diagnosis and control of scheduling errors such as lights and equipment left on during unoccupied hours. This project developed a generic infrastructure for performance monitoring, diagnostics, and control, applicable to a broad range of building systems and equipment, but targeted specifically to small to medium commercial buildings (an underserved market segment). The proposed solution is based on two wireless technologies. The first, wireless telemetry, is used for cell phones and paging and is reliable and widely available. This risk proved to be easily managed during the project. The second technology is on-site wireless communication for acquiring data from sensors and transmitting control signals. The technology must enable communication with many nodes, overcome physical obstructions, operate in environments with other electrical equipment, support operation with on-board power (instead of line power) for some applications, operate at low transmission power in license-free radio bands, and be low cost. We proposed wireless mesh networking to meet these needs. This technology is relatively new and has been applied only in research and tests. This proved to be a major challenge for the project and was ultimately abandoned in favor of a directly wired solution for collecting sensor data at the building. The primary reason for this was the relatively short ranges at which we were able to effectively place the sensor nodes from the central receiving unit. Several different mesh technologies were attempted with similar results. Two hardware devices were created during the original performance period of the project. The first device, the WEB-MC, is a master control unit that has two radios, a CPU, memory, and serves as the central communications device for the WEB-MC System (Currently called the 'BEST Wireless HVAC Maintenance System' as a tentative commercial product name). The WEB-MC communicates with the local mesh network system via one of its antennas. Communication with the mesh network enables the WEB-MC to configure the network, send/receive data from individual motes, and serves as the primary mechanism for collecting sensor data at remote locations. The second antenna enables the WEB-MC to connect to a cellular network ('Long-Haul Communications') to transfer data to and from the NorthWrite Network Operations Center (NOC). A third 'all-in-one' hardware solution was created after the project was extended (Phase 2) and additional resources were provided. The project team leveraged a project funded by the State of Washington to develop a hardware solution that integrated the functionality of the original two devices. The primary reason for this approach was to eliminate the mesh network technical difficulties that severely limited the functionality of the original hardware approach. There were five separate software developments required to deliver the functionality needed for this project. These include the Data Server (or Network Operations Center), Web Application, Diagnostic Software, WEB-MC Embedded Software, Mote Embedded Software. Each of these developments was necessarily dependent on the others. This resulted in a challenging management task - requiring high bandwidth communications among all the team members. Fortunately, the project team performed exceptionally well together and was able to work through the various challenges that this presented - for example, when one software tool required a detailed description of the output of a second tool, before that tool had been fully designed.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Implementing a bubble memory hierarchy system

This paper reports on implementation of a magnetic bubble memory in a two-level hierarchial system. The hierarchy used a major-minor loop device and RAM under microprocessor control. Dynamic memory addressing, dual bus primary memory, and hardware data modification detection are incorporated in the system to minimize access time. It is the objective of the system to incorporate the advantages of bipolar memory with that of bubble domain memory to provide a smart, optimal memory system which is easy to interface and independent of user's system.

Segura, R.↗

Towards Architecture and OS-Independent Malware Detection via Memory Forensics

In this work, we take a fundamentally different approach to the problem of analyzing a device for compromises via malware; our approach is OS and instruction architecture independent and relies only on having the raw binary data extracted from the memory dump of a device. Our system leverages a multi-hundred TB dataset of both compromised host memory dumps extracted from the MalRec dataset [8] and the first known dataset of benign host memory dumps running normal, non-compromised software. After an average of 30 to 45 seconds of pre-processing on a single memory dump, our system leverages both traditional machine learning and deep learning algorithms to achieve an average of 98% accuracy of detecting a compromised host.

Petrik, Rachel L.↗

Gigarad-tolerant power switches and memory elements

A new class of silicon devices operating without p-n junctions has been studied for radiation hardness. The electric field in these devices is uniform over most of the device, thus causing high-voltage breakdown to increase with electrode spacing. Deep acceptor levels are created in the silicon by diffusing gold atoms into the lattice, or by electron radiation. These acceptor levels, near the center of the band gap, trap out electrons so that the low resistivity of the n-type doped wafer can be raised to intrinsic resistivity. Switching between a high-resistivity state at low currents and a low-resistivity state at high currents occurs at a definite threshold voltage, exhibiting characteristics similar to silicon-controlled rectifiers. Compensating 0.1 ohm-meter (10 ohm-cm) silicon wafers requires electron fluxes of 10 to the 23rd electrons per square meter (10 to the 19th electrons per square centimeter). Experiments demonstrating gamma tolerance to 1 Gigarad(Si) are described. Calculations for maximum tolerable neutron fluence are shown, and a phenomenological explanation for these results is presented.

Joyner, W. T.↗

Recent developments on 2D magnetic materials: challenges and opportunities

The emergence of two-dimensional (2D) magnetic materials exhibiting strong magnetization at ultrathin limits above room temperature are promising for miniaturization of devices beyond Moore’s law for future energy efficient nano-electronic devices. Here, the current status, different mechanisms for the existence of magnetism, spin current injection and other magnetic properties of monolayer to few-layers of various 2D magnetic materials are reviewed. Some of the promising applications of these materials are spintronics devices such as spin valves, spin tunnel field-effect transistors, and spin filtering magnetic tunnel junctions. Due to the tunable electronic properties of these 2D materials, it's quite interesting to inject the spin current with suitable ferromagnetic contacts. For instance,black phosphorus is a layered material with a small Schottky barrier height capable of injecting spin current. This review includes many recently explored 2D magnetic materials ranging from exfoliated 2D crystals to CVD grown materials from single to several layers, demonstrating tunable layer dependent magnetic properties. We also explore some of the promising theoretical study based on 2D magnetic compounds such as 2D alkali-based chromium chalcogenides, which shows ferromagnetic as well as semiconducting behavior. The layer-dependent magnetic ordering has been observed in layered compounds like 1T-CrTe 2 , VSe 2 , CrI 3 , and Fe 3 GeTe 2 , which have great potential for the future applications in magnetic based electronic devices. Finally, we emphasize the challenges, opportunities and future directions of the 2D magnetic materials, where new discoveries might have outstanding impact in transformational scientific breakthroughs towards memory, spintronics, optoelectronics and other multifunctional device applications.

36 MATERIALS SCIENCE↗

Defect states and charge trapping characteristics of HfO{sub 2} films for high performance nonvolatile memory applications

In this work, we present significant charge trapping memory effects of the metal-hafnium oxide-SiO{sub 2}-Si (MHOS) structure. The devices based on 800 °C annealed HfO{sub 2} film exhibit a large memory window of ∼5.1 V under ±10 V sweeping voltages and excellent charge retention properties with only small charge loss of ∼2.6% after more than 10{sup 4 }s retention. The outstanding memory characteristics are attributed to the high density of deep defect states in HfO{sub 2} films. We investigated the defect states in the HfO{sub 2} films by photoluminescence and photoluminescence excitation measurements and found that the defect states distributed in deep energy levels ranging from 1.1 eV to 2.9 eV below the conduction band. Our work provides further insights for the charge trapping mechanisms of the HfO{sub 2} based MHOS devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Variation-Resilient FeFET-Based In-Memory Computing Leveraging Probabilistic Deep Learning

Reliability issues stemming from device level nonidealities of nonvolatile emerging technologies like ferroelectric field-effect transistors (FeFETs), especially at scaled dimensions, cause substantial degradation in the accuracy of in-memory crossbar-based AI systems. Here, in this work, we present a variation-aware design technique to characterize the device level variations and to mitigate their impact on hardware accuracy employing a Bayesian neural network (BNN) approach. An effective conductance variation model is derived from the experimental measurements of cycle-to-cycle (C2C) and device-to-device (D2D) variations performed on FeFET devices fabricated using 28 nm high-k metal gate technology. The variations were found to be a function of different conductance states within the given programming range, which sharply contrasts earlier efforts where a fixed variation dispersion was considered for all conductance values. Such variation characteristics formulated for three different device sizes at different read voltages were provided as prior variation information to the BNN to yield a more exact and reliable inference. Near-ideal accuracy for shallow networks (MLP5 and LeNet models) on the MNIST dataset and limited accuracy decline by ~3.8%–16.1% for deeper AlexNet models on CIFAR10 dataset under a wide range of variations corresponding to different device sizes and read voltages, demonstrates the efficacy of our proposed device-algorithm co-design technique.

97 MATHEMATICS AND COMPUTING↗

Room-Temperature Creation and Spin–Orbit Torque Manipulation of Skyrmions in Thin Films with Engineered Asymmetry

Magnetic skyrmions, which are topologically protected spin textures, are promising candidates for ultralow-energy and ultrahigh-density magnetic data storage and computing applications. To date, most experiments on skyrmions have been carried out at low temperatures. The choice of available materials is limited, and there is a lack of electrical means to control skyrmions in devices. In this work, we demonstrate a new method for creating a stable skyrmion bubble phase in the CoFeB–MgO material system at room temperature, by engineering the interfacial perpendicular magnetic anisotropy of the ferromagnetic layer. Importantly, we also demonstrate that artificially engineered symmetry breaking gives rise to a force acting on the skyrmions, in addition to the current-induced spin–orbit torque, which can be used to drive their motion. This room-temperature creation and manipulation of skyrmions offers new possibilities to engineer skyrmionic devices. The results bring skyrmionic memory and logic concepts closer to realization in industrially relevant and manufacturable thin film material systems.

36 MATERIALS SCIENCE↗

Unconventional unidirectional magnetoresistance in heterostructures of a topological semimetal and a ferromagnet

Unidirectional magnetoresistance (UMR) in a bilayer heterostructure, consisting of a spin-source material and a magnetic layer, refers to a change in the longitudinal resistance on the reversal of magnetization and originates from the interaction of non-equilibrium spin accumulation and magnetization at the interface. Since the spin polarization of an electric-field-induced non-equilibrium spin accumulation in conventional spin-source materials is restricted to be in the film plane, the ensuing UMR can only respond to the in-plane component of magnetization. However, magnets with perpendicular magnetic anisotropy are highly desired for magnetic memory and spin-logic devices, whereas the electrical read-out of perpendicular magnetic anisotropy magnets through UMR is critically missing. Here, in this study, we report the discovery of an unconventional UMR in the heterostructures of a topological semimetal (WTe 2 ) and a perpendicular magnetic anisotropy ferromagnetic insulator (Cr 2 Ge 2 Te 6 ), which allows to electrically read the up and down magnetic states of the Cr 2 Ge 2 Te 6 layer through longitudinal resistance measurements.

Kao, I-Hsuan [Carnegie Mellon Univ., Pittsburgh, P↗

Magnetization switching of rare earth orthochromite CeCrO{sub 3}

We report the synthesis of single phase rare earth orthochromite CeCrO{sub 3} and its magnetic properties. A canted antiferromagnetic transition with thermal hysteresis at T = 260 K is observed, and a magnetic compensation (zero magnetization) near 133 K is attributed to the antiparallel coupling between Ce{sup 3+} and Cr{sup 3+} moments. At low temperature, field induced magnetization reversal starting from 43 K for H = 1.2 kOe reveals the spin flip driven by Zeeman energy between the net moments and the applied field. These findings may find potential uses in magnetic switching devices such as nonvolatile magnetic memory which facilitates two distinct states of magnetization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interface-assisted molecular spintronics

Molecular spintronics, a field that utilizes the spin state of organic molecules to develop magneto-electronic devices, has shown an enormous scientific activity for more than a decade. But, in the last couple of years, new insights in understanding the fundamental phenomena of molecular interaction on magnetic surfaces, forming a hybrid interface, are presenting a new pathway for developing the subfield of interface-assisted molecular spintronics. The recent exploration of such hybrid interfaces involving carbon based aromatic molecules shows a significant excitement and promise over the previously studied single molecular magnets. In the above new scenario, hybridization of the molecular orbitals with the spin-polarized bands of the surface creates new interface states with unique electronic and magnetic character. This study opens up a molecular-genome initiative in designing new handles to functionalize the spin dependent electronic properties of the hybrid interface to construct spin-functional tailor-made devices. Through this article, we review this subject by presenting a fundamental understanding of the interface spin-chemistry and spin-physics by taking support of advanced computational and spectroscopy tools to investigate molecular spin responses with demonstration of new interface phenomena. Spin-polarized scanning tunneling spectroscopy is favorably considered to be an important tool to investigate these hybrid interfaces with intra-molecular spatial resolution. Finally, by addressing some of the recent findings, we propose novel device schemes towards building interface tailored molecular spintronic devices for applications in sensor, memory, and quantum computing.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Field-dependent perpendicular magnetic anisotropy in CoFeB thin films

We report ferromagnetic resonance measurements of perpendicular magnetic anisotropy in thin films of Ta/Co{sub 20}Fe{sub 60}B{sub 20}/MgO as a function of the Co{sub 20}Fe{sub 60}B{sub 20} layer thickness. The first and second order anisotropy terms show unexpectedly strong dependence on the external magnetic field applied to the system during the measurements. We propose strong interfacial spin pinning as a possible origin of the field-dependent anisotropy. Our results imply that high-field anisotropy measurements cannot be directly used for quantitative evaluation of zero-field performance parameters of CoFeB-based devices such as spin torque memory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Beta (β) tungsten thin films: Structure, electron transport, and giant spin Hall effect

We use a simple magnetron sputtering process to fabricate beta (β) tungsten thin films, which are capable of generating giant spin Hall effect. As-deposited thin films are always in the metastable β-W phase from 3.0 to 26.7 nm. The β-W phase remains intact below a critical thickness of 22.1 nm even after magnetic thermal annealing at 280 °C, which is required to induce perpendicular magnetic anisotropy (PMA) in a layered structure of β-W/Co{sub 40}Fe{sub 40}B{sub 20}/MgO. Intensive annealing transforms the thicker films (>22.1 nm) into the stable α-W phase. We analyze the structure and grain size of both β- and α-W thin films. Electron transport in terms of resistivity and normal Hall effect is studied over a broad temperature range of 10 K to at least 300 K on all samples. Very low switching current densities are achieved in β-W/Co{sub 40}Fe{sub 40}B{sub 20}/MgO with PMA. These basic properties reveal useful behaviors in β-W thin films, making them technologically promising for spintronic magnetic random access memories and spin-logic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗