Search NASA⌕ Search

SEARCH · Search NASA

Results for “Model initialization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59
All sourcesNASA NTRSDOE OSTI
NASA NTRS1996

Design of a Superconducting Magnetic Suspension System for a Liquid Helium Flow Experiment

We discuss a preliminary design for a superconducting magnetic suspension system for measurement of drag on rotationally symmetric bodies in liquid helium. Superconducting materials are a natural choice for liquid helium studies, since temperatures are well below most critical temperatures, so that the resulting heat load is negligible. Also, due to its diamagnetic properties, a superconducting model (for example made or coated with Nb) is inherently stable against disturbances. Issues which we consider include model placement during initial cool-down, maintaining placement during anticipated drag and lift forces, and force measurement. This later can be achieved by a passive technique, where the body is allowed to deflect under the influence of drag from its neutral position. The resulting shift in flux is detected via a superconducting pickup coil. The pickup coil may be connected either to a SQUID, or a secondary loop wound around a Hall probe. Both options are discussed. The objective of this work is to gain a better understanding of the nature of turbulent fields in normal and superfluid helium for potential application to problems in classical high Reynolds number turbulence.

Smith, Michael R.↗
NASA NTRS1998

Monte Carlo Simulation of Endlinking Oligomers

This report describes initial efforts to model the endlinking reaction of phenylethynyl-terminated oligomers. Several different molecular weights were simulated using the Bond Fluctuation Monte Carlo technique on a 20 x 20 x 20 unit lattice with periodic boundary conditions. After a monodisperse "melt" was equilibrated, chain ends were linked whenever they came within the allowed bond distance. Ends remained reactive throughout, so that multiple links were permitted. Even under these very liberal crosslinking assumptions, geometrical factors limited the degree of crosslinking. Average crosslink functionalities were 2.3 to 2.6; surprisingly, they did not depend strongly on the chain length. These results agreed well with the degrees of crosslinking inferred from experiment in a cured phenylethynyl-terminated polyimide oligomer.

Hinkley, Jeffrey A.↗
NASA NTRS1998

On the Nature of the High Velocity(26) Al Near the Galactic Center

Recent observations of the Galactic Center region by the GRIS balloon-borne germanium spectrometer have determined that the diffuse 1809 keV emission resulting from the decay of Al-26 has an intrinsic width of 5.4 keV FWHM. This line width indicates that the Al-26 is either at a temperature of approximately 4.5 x 10(exp 8) K or it has a nonthermal velocity of approximately 500 km/s. Previous authors have suggested that the Al-26 must be trapped within dust grains in the ISM in order for these conditions to persist over the 10(exp 6) year lifetime of the aluminum (see e.g. Naya et al. 1996, Chen et al. 1998). We discuss the results of our model for the initial acceleration of the Al-26 in dust grains as they exit their source, Type II supernovae, and their subsequent reacceleration in the ISM by ambient supernova remnant (SNR) shocks. Our results show that dust grains can be maintained at a velocity sufficient to explain the GRIS observation for ISM densities of approximately 0.2 cu cm, dust grain sizes near 10(exp -5) cm, and distances between SNR shocks in the ISM of 100 - 200 pc.

Sturner, Steven J.↗
NASA NTRS1998

AGN Populations, Evolution, and AXAF

A successful empirical description of quasar evolution - 'luminosity' vs. 'density' evolution - is at hand [see e.g. next talk by Hasinger], but the causes of this evolution are currently merely speculation. To develop a physical understanding of the cause of AGN evolution is the next challenge in AGN studies. To create this model -requires an initial mass function for quasar black holes and a the time dependence of their fuelling rate. We review some observational and theoretical paths by which these basic inputs can be constrained; and consider how AXAF and other future missions will make progress.

Elvis, Martin↗
NASA NTRS1993

Ballistic Models for Radio Jets in Colliding Galaxies: 3C 278 (NGC 4782/4783)

We present here a general numerical simulation algorithm for ballistic radio jets. The evolution of the jets is determined by their response to mechanical forces (i.e., gravity and ram pressure). Using a previously derived collision model for the interacting pair of elliptical galaxies NGC 4782/4783, we have used this algorithm to simulate the specific two-sided jet morphology seen in the radio source associated with NGC 4782 (3C 278). This is the first time such simulations have been attempted for a galaxy pair whose relative orbit was determined independently from the jet modeling. The general morphological features of the jets in 3C 278 (e.g., position angles, lengths, curvature, and deflection angles) are well matched by the simulations, indicating that our model of the mechanical forces acting on the jets can indeed reproduce most of the basic details of the jet morphology and thereby provide an opportunity to model a combination of detailed optical, radio, and X-ray data for a wide variety of interacting radio-jet galaxies. Our models constrain the initial jet parameters (i.e., the ejection speed, direction, and starting time), the properties of the gaseous medium into which the jets are ejected, and the relative importance of gravitational deflection versus ram pressure bending in influencing the jet morphology. For 3C 278, we find that the effects of ram pressure dominate the structural evolution of the jets. In our best-fit simulation the jet ejection speed is of order 10(exp 4) km/s, to within 50%, suggesting that similar low-luminosity radio jets are also significantly subluminal. We also find that the jets are ejected within approximately 5 deg of the line of sight, the ISM in the nonjet galaxy has a much larger effect on the jet deflection than does the host galaxy, and the jet activity began just over 70 million years ago, roughly 50 million years before the pericenter passage of the two galaxies. Therefore, the onset of nuclear activity appears in 3C 278 to be related to the kinematically observed tidal shock that has been induced in the core of NGC 4782 as a result of its deeply penetrating collision with NGC 4783.

Borne, Kirk D.↗
NASA NTRS1999

Structure Damage Simulations Accounting for Inertial Effects and Impact and Optimization of Grid-Stiffened Non-Circular Shells

The goal of this research project is to develop modelling and analysis strategy for the penetration of aluminium plates impacted by titanium impactors. Finite element analysis is used to study the penetration of aluminium plates impacted by titanium impactors in order to study the effect of such uncontained engine debris impacts on aircraft-like skin panels. LS-DYNA3D) is used in the simulations to model the impactor, test fixture frame and target barrier plate. The effects of mesh refinement, contact modeling, and impactor initial velocity and orientation were studied. The research project also includes development of a design tool for optimum design of grid-stiffened non-circular shells or panels subjected to buckling.

Mei, Chuh↗
NASA NTRS2000

Modeling and Design of an Electro-Rheological Fluid Based Haptic System for Tele-Operation of Space Robots

For many years, the robotic community sought to develop robots that can eventually operate autonomously and eliminate the need for human operators. However, there is an increasing realization that there are some tasks that human can perform significantly better but, due to associated hazards, distance, physical limitations and other causes, only robot can be employed to perform these tasks. Remotely performing these types of tasks requires operating robots as human surrogates. While current "hand master" haptic systems are able to reproduce the feeling of rigid objects, they present great difficulties in emulating the feeling of remote/virtual stiffness. In addition, they tend to be heavy, cumbersome and usually they only allow limited operator workspace. In this paper a novel haptic interface is presented to enable human-operators to "feel" and intuitively mirror the stiffness/forces at remote/virtual sites enabling control of robots as human-surrogates. This haptic interface is intended to provide human operators intuitive feeling of the stiffness and forces at remote or virtual sites in support of space robots performing dexterous manipulation tasks (such as operating a wrench or a drill). Remote applications are referred to the control of actual robots whereas virtual applications are referred to simulated operations. The developed haptic interface will be applicable to IVA operated robotic EVA tasks to enhance human performance, extend crew capability and assure crew safety. The electrically controlled stiffness is obtained using constrained ElectroRheological Fluids (ERF), which changes its viscosity under electrical stimulation. Forces applied at the robot end-effector due to a compliant environment will be reflected to the user using this ERF device where a change in the system viscosity will occur proportionally to the force to be transmitted. In this paper, we will present the results of our modeling, simulation, and initial testing of such an electrorheological fluid (ERF) based haptic device.

Mavroidis, Constantinos↗
NASA NTRS2001

A Geosynchronous Lidar System for Atmospheric Winds, Temperature, and Moisture Measurements

A geosynchronous Lidar would enable synoptic measurement of atmospheric winds; temperature; and moisture, which are key first-order variables of the Earth's weather equation. Simultaneous measurement of these parameters at fast revisit rates promises large advancements in our weather predictive skills. Such capabilities would: a) yield greatly improved initial conditions for models, b) make obsolete existing (discrete) measurement approaches which are both costly and cumbersome, and c) obviate the use of numerical techniques needed to correct data obtained using present methods. Additionally, simultaneous synoptic Lidar observations would lead to improvements in model parameters, and in our knowledge of small-scale weather processes. A Dial Lidar system could simultaneously measure winds, temperatures, and humidity through a combination of Doppler and Differential Absorption techniques. Also, such a system would provide basic aerosol (dry dust) measurement capabilities that could have an impact on Earth radiation budget measurements. On the technical side, a geosynchronous Lidar DAR system would require transmit optics of a few meters in diameter, a hundred meter diameter receive telescope, fineness of both optical systems scaled to the wavelength, and scanning for the transmit system. Potential technology issues include optical quality of large transmit and receive telescope optics, the large detector area needed, the transmit scanning system, signal detection (S/N ratio of detector system) for the extremely weak return signal at GEO, and power demands in the KW range.

Emmitt, Dave↗
NASA NTRS2001

A Geosynchronous Lidar System for Atmospheric Winds and Moisture Measurements

An observing system comprised of two lidars in geosynchronous orbit would enable the synoptic and meso-scale measurement of atmospheric winds and moisture, both of which are key first-order variables of the Earth's weather equation. Simultaneous measurement of these parameters at fast revisit rates promises large advancements in our weather prediction skills. Such capabilities would be unprecedented and yield greatly improved and finer resolution initial conditions for models, make existing costly and cumbersome measurement approaches obsolete, and obviate the use of numerical techniques needed to correct data obtained using present observing systems. Additionally, simultaneous synoptic wind and moisture observations would lead to improvements in model parameterizations, and in our knowledge of small-scale weather processes. Technology and science data product assessments are ongoing. Results will be presented during the conference.

Emmitt, G. D.↗
NASA NTRS2001

A Geosynchronous Lidar System for Atmospheric Winds and Moisture Measurements

An observing system comprised of two lidars in geosychronous orbit would enable the synoptic and meso-scale measurement of atmospheric winds and moisture both of which are key first-order variables of the Earth's weather equation. Simultaneous measurement of these parameters at fast revisit rates promises large advancements in our weather prediction skills. Such capabilities would be unprecedented and a) yield greatly improved and finer resolution initial conditions for models, b) make existing costly and cumbersome measurement approaches obsolete, and c) obviate the use of numerical techniques needed to correct data obtained using present observing systems. Additionally, simultaneous synoptic wind and moisture observations would lead to improvements in model parameterizations, and in our knowledge of small-scale weather processes. Technology and science data product assessments are ongoing. Results will be presented during the conference.

Emmitt, G. D.↗
NASA NTRS2002

The Solar-Sail Launched Interstellar Probe: Pre-Perihelion Trajectories and Application of Holography

Design of missions beyond our solar system presents many challenges. Here, we consider certain aspects of the solar-sail launched interstellar probe (ISP), a spacecraft slated for launch in the 2010 time period that is planned to reach the heliopause, at 200 Astronomical Units (AU) from the Sun after a flight of about 20-years duration. The baseline mission under consideration by NASA / JPL has a sail radius of 200 m, a science payload of 25 kg, a spacecraft areal mass thickness of about two grams per square meter and is accelerated out of the solar system at about 14 AU per year after performing a perihelion pass of about 0.25 AU. In current plans, the sail is to be dropped near Jupiter's orbit (5.2 AU from the Sun) on the outbound trajectory leg. One aspect of this study is application of a realistic model of sail thermo-optics to sail kinematics that includes diffuse / specular reflectance and sail roughness. The effects of solar-wind degradation of sail material, based on recent measurements at the NASA MSFC (Marshall Space Flight Center) Space Environment Facility were incorporated in the kinematical model. After setting initial and final conditions for the spacecraft, trajectory was optimized using the provision of variable sail aspect angle. The second phase of the study included consideration of rainbow holography as a medium for a message plaque that would be carried aboard the ISP in the spirit of the message plaques aboard Pioneer 10 /11 and Voyager 1 /2. A prototype holographic message plaque was designed and created by artist C. Bangs with the assistance of Ana Maria Nicholson and Dan Schweitzer of the Center for Holographic Arts in Long Island City, NY. The piece was framed by Simon Liu Inc. of Brooklyn, NY. Concurrent to the creation of the prototype message plaque, we explored the potential of this medium to transmit large amounts of visual information to any extraterrestrial civilization that might detect and intercept ISP. It was also necessary to investigate possible degradation of holograms by the space environment. We developed a new way of characterizing the optical quality of holograms.

Gregory L. Matloff↗
NASA NTRS2002

North American Observing Systems: An Interagency Group Runs Tests at the NCCS

Some 250,000 weather reports are collected by the National Weather Service (NWS) every day. Important measurements are taken by satellites, weather balloons, ground weather stations, airplanes, oceangoing ships, and tethered ocean buoys. Local or global weather models rely on these reports to provide the raw data used as initial conditions for the models to produce a weather prediction.

Source record↗
NASA NTRS2002

Micromachined Tunable Fabry-Perot Filters for Infrared Astronomy

Micromachined Fabry-Perot tunable filters with a large clear aperture (12.5 to 40 mm) are being developed as an optical component for wide-field imaging 1:1 spectroscopy. This program applies silicon micromachining fabrication techniques to miniaturize Fabry-Perot filters for astronomical science instruments. The filter assembly consists of a stationary etalon plate mated to a plate in which the etalon is free to move along the optical axis on silicon springs attached to a stiff silicon support ring. The moving etalon is actuated electrostatically by electrode pairs on the fixed and moving etalons. To reduce mass, both etalons are fabricated by applying optical coatings to a thin freestanding silicon nitride film held flat in drumhead tension rather than to a thick optical substrate. The design, electro-mechanical modeling, fabrication, and initial results will be discussed. The potential application of the miniature Fabry-Perot filters will be briefly discussed with emphasis on the detection of extra-solar planets.

Barclay, Richard↗
NASA NTRS2004

Evidence for Live Cl-36 in Ca-Al-rich Inclusions from the Ningqiang Carbonaceous Chondrite

The short-lived radionuclide Cl-36 decays to either Ar-36 (98.1%, beta(sup -)) or S-36 (1.9%, epsilon and beta(sup +)), with a half life of 3.01 x 10(exp 5) yr. Both the nucleosynthetic and spallation models suggest high initial Cl-36/Cl-35 ratios ((Cl-36/Cl-35)o up to approximately 10(exp -4)) in the early solar system. Previous observed excess Ar-36 in Efremovka matrix has been interpreted to represent a much lower (Cl-36/Cl-35)o ratio of approximately 1 x 10(exp -6). From the observed S-36 excesses in sodalite in calcium aluminum-rich inclusions (CAIs), we report in this study the first direct evidence of the presence of Cl-36 in primitive meteorites. The inferred (Cl-36/Cl-35)o ratios range from approximately 5 x 10(exp -6) to approximately 1 x 10(exp -5).

Lin, Y.↗
NASA NTRS1999

Numerical Modeling Studies of Wake Vortices: Real Case Simulations

A three-dimensional large-eddy simulation model, TASS, is used to simulate the behavior of aircraft wake vortices in a real atmosphere. The purpose for this study is to validate the use of TASS for simulating the decay and transport of wake vortices. Three simulations are performed and the results are compared with the observed data from the 1994-1995 Memphis field experiments. The selected cases have an atmospheric environment of weak turbulence and stable stratification. The model simulations are initialized with appropriate meteorological conditions and a post roll-up vortex system. The behavior of wake vortices as they descend within the atmospheric boundary layer and interact with the ground is discussed.

Shen, Shao-Hua↗
NASA NTRS2004

Impact of Variations on 1-D Flow in Gas Turbine Engines via Monte Carlo Simulations

The unsteady compressible inviscid flow is characterized by the conservations of mass, momentum, and energy; or simply the Euler equations. In this paper, a study of the subsonic one-dimensional Euler equations with local preconditioning is presented using a modal analysis approach. Specifically, this study investigates the behavior of airflow in a gas turbine engine using the specified conditions at the inflow and outflow boundaries of the compressor, combustion chamber, and turbine, to determine the impact of variations in pressure, velocity, temperature, and density at low Mach numbers. Two main questions motivate this research: 1) Is there any aerodynamic problem with the existing gas turbine engines that could impact aircraft performance? 2) If yes, what aspect of a gas turbine engine could be improved via design to alleviate that impact and to optimize aircraft performance? This paper presents an initial attempt to model the flow behavior in terms of their eigenfrequencies subject to the assumption of the uncertainty or variation (perturbation). The flow behavior is explored using simulation outputs from a customer-deck model obtained from Pratt & Whitney. Variations of the main variables (i.e., pressure, temperature, velocity, density) about their mean states at the inflow and outflow boundaries of the compressor, combustion chamber, and turbine are modeled. Flow behavior is analyzed for the high-pressure compressor and combustion chamber utilizing the conditions on their left and right boundaries. In the same fashion, similar analyses are carried out for the high-pressure and low-pressure turbines. In each case, the eigenfrequencies that are obtained for different boundary conditions are examined closely based on their probabilistic distributions, a result of a Monte Carlo 10,000 sample simulation. Furthermore, the characteristic waves and wave response are analyzed and contrasted among different cases, with and without preconditioners. The results reveal the existence of flow instabilities due to the combined effect of variations and excessive pressures in the case of the combustion chamber and high-pressure turbine. Finally, a discussion is presented on potential impacts of the instabilities and what can be improved via design to alleviate them for a better aircraft performance.

Ngo, Khiem Viet↗
NASA NTRS2004

Solar Particle Events at Mars Seen by MARIE, 2002-2003

The MARIE detector aboard the 200 1 Mars Odyssey operated continuously between March 13, 2002, and October 28, 2003. During these twenty months, approximately 12 periods of enhanced solar particle activity were observed. The last of these, on October 26-28, 2003, caused the instrument to lose communication with the spacecraft. In addition to that very large event, several other major Solar Particle Events (SPEs) were observed. Those prior to March 2003 have been discussed elsewhere [I] and will be reviewed here. Many of the solar events seen at Mars correspond well to observations by GOES and ACE satellites near Earth. Some SPEs were observed by MARIE when Mars was on, or near, the opposite side of the sun as seen from Earth; and while a few of them - most notably the large full-halo Coronal Mass Ejections of July 2002 - coincided with events seen by the near-Earth satellites, others were not seen at Earth. Conversely, in this same time period, some SPEs were seen at Earth but not at Mars. Subsequent to February 2003, three SPEs were observed by MARIE, on March 18- 20, May 28 - June 3, and Oct. 26-28. Observations of solar energetic particles at Mars can be combined with data from other points in the heliosphere from, e.g., the Solar Heliospheric Observatory, ACE/CRIS, and GOES satellites near Earth, and Ulysses. Having several different observation points is useful for testing models of CME initiation and propagation.

Cleghorn, T.↗
NASA NTRS2005

Simulation of Blast Waves with Headwind

The blast wave resulting from an explosion was simulated to provide guidance for models estimating risks for human spacecraft flight. Simulations included effects of headwind on blast propagation, Blasts were modelled as an initial value problem with a uniform high energy sphere expanding into an ambient field. Both still air and cases with headwind were calculated.

Olsen, Michael E.↗