Search NASA⌕ Search

SEARCH · Search NASA

Results for “Nonlinear processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

High-harmonic generation from an epsilon-near-zero material

High-harmonic generation (HHG) is a signature optical phenomenon of strongly driven, nonlinear optical systems. Specifically, the understanding of the HHG process in rare gases has played a key role in the development of attosecond science. Recently, HHG has also been reported in solids, providing novel opportunities such as controlling strong-field and attosecond processes in dense optical media down to the nanoscale. Here, we report HHG from a low-loss, indium-doped cadmium oxide thin film by leveraging the epsilon-near-zero (ENZ) effect, whereby the real part of the material’s permittivity in certain spectral ranges vanishes, as well as the associated large resonant enhancement of the driving laser field. We find that ENZ-assisted harmonics exhibit a pronounced spectral redshift as well as linewidth broadening, resulting from the photo induced electron heating and the consequent time-dependent ENZ wavelength of the material. Furthermore, our results provide a new platform to study strong-field and ultrafast electron dynamics in ENZ materials, reveal new degrees of freedom for spectral and temporal control of HHG, and open up the possibilities of compact solid-state attosecond light sources.

36 MATERIALS SCIENCE↗

Near shot-noise limited time-resolved circular dichroism pump-probe spectrometer

We describe an optical near shot-noise limited time-resolved circular dichroism (TRCD) pump-probe spectrometer capable of reliably measuring circular dichroism signals in the order of $\mu$deg with nanosecond time resolution. Such sensitivity is achieved through a modification of existing TRCD designs and introduction of a new data processing protocol that eliminates approximations that have caused substantial nonlinearities in past measurements and allows the measurement of absorption and circular dichroism transients simultaneously with a single pump pulse. The exceptional signal-to-noise ratio of the described setup makes the TRCD technique applicable to a large range of non-biological and biological systems. Finally, the spectrometer was used to record, for the first time, weak TRCD kinetics associated with the triplet state energy transfer in the photosynthetic Fenna-Matthews-Olson antenna pigment-protein complex.

47 OTHER INSTRUMENTATION↗

Understanding plasma turbulence through exact coherent structures

Plasma turbulence is a key challenge in understanding transport phenomena in magnetically confined plasmas. This work presents a generalized framework to analyze plasma turbulence that utilizes periodic orbit theory. In periodic orbit theory, doubly periodic solutions (coherent structures) of the governing equation(s) serve as building blocks of the considered turbulent dynamics. To illustrate the concept and method, the particularly simple Kuramoto–Sivashinsky (referred to here as LMRT for the original authors: LaQuey, Mahajan, Rutherford, and Tang) trapped-ion mode toy model is used. By applying numerical optimization techniques to the LMRT equation, we extract coherent spacetime patterns that represent the library of allowable fundamental structures of the equation. These structures provide a framework to systematically describe turbulence as a composition of recurrent solutions, revealing an underlying order within chaotic plasma motion. Although illustrated here using the simplified LMRT model for clarity, this framework provides a general strategy that can be extended to more complex and realistic models of plasma turbulence, including gyrokinetic systems. This offers a new method for predicting and potentially controlling transport processes in fusion plasmas by providing a bridge between nonlinear dynamical systems theory and plasma physics in the form of a generalized framework with which to analyze and understand spatially extended nonlinear partial differential equations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Probing the low-x structure of nuclear matter with diffractive hadron production in pA collisions

We argue that hadron production in coherent diffraction of protons on a heavy nucleus provides a very sensitive probe of the low-x QCD dynamics. This process probes the BFKL dynamics in protons and the nonlinear gluon evolution in nuclei. We calculate the diffractive hadron production cross sections in the BNL Relativistic Heavy Ion Collider (RHIC) and CERN Large Hadron Collider (LHC) kinematic regions. To study the nuclear effects we introduce the diffractive nuclear modification factor. We show that, unlike the nuclear modification factor for inclusive hadron production that has very interesting dynamics at RHIC but is expected to be almost completely saturated at the LHC, the nuclear modification factor for diffractive production exhibits a nontrivial behavior at both RHIC and LHC.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Quantum simulations for strong-field QED

Quantum field theory in the presence of strong background fields contains interesting problems where quantum computers may someday provide a valuable computational resource. In the noisy intermediate-scale quantum era it is useful to consider simpler benchmark problems in order to develop feasible approaches, identify critical limitations of current hardware, and build new simulation tools. Here we perform quantum simulations of strong-field QED (SFQED) in 3 + 1 dimensions, using real-time nonlinear Breit-Wheeler pair production as a prototypical process. The strong-field QED Hamiltonian is derived and truncated in the Furry-Volkov mode expansion, and the interactions relevant for Breit-Wheeler are transformed into a quantum circuit. Quantum simulations of a “null double slit” experiment are found to agree well with classical simulations following the application of various error mitigation strategies, including an asymmetric depolarization algorithm which we develop and adapt to the case of Trotterization with a time-dependent Hamiltonian. We also discuss longer-term goals for the quantum simulation of SFQED. Published by the American Physical Society 2024

Astronomy & Astrophysics↗

How mesoscopic staircases condense to macroscopic barriers in confined plasma turbulence

This Rapid Communication sets forth the mechanism by which mesoscale staircase structures condense to form macroscopic states of enhanced confinement. Density, vorticity, and turbulent potential enstrophy are the variables for this model. Formation of the staircase structures is due to inhomogeneous mixing of (generalized) potential vorticity (PV). Such mixing results in the local sharpening of density and vorticity gradients. When PV gradients steepen, the density staircase structure develops into a lattice of mesoscale “jumps” and “steps,” which are, respectively, regions of local gradient steepening and flattening. The jumps then merge and migrate in radius, leading to the emergence of a new macroscale profile structure, so indicating that profile self-organization is a global process, which may be described by a local, but nonlinear model. This work predicts and demonstrates how mesoscale condensation of staircases leads to global states of enhanced confinement.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optimal Network Topology for Node-Breaker Representations With AC Power Flow Constraints

It has been demonstrated that network topology optimization (NTO) may change the topology of power system networks, and consequently, provide additional flexibility to reduce network congestion and violations. Most NTO problems are formulated based on the bus-branch model in which it is challenging to represent a realistic picture of all substation configurations. In this paper, we explore advantages of substation reconfiguration modeling based on node-breaker representations for NTO problem with full nonlinear alternating current power flow. It also proposes a tailored solution algorithm to solve this nonconvex mixed-integer nonlinear programming through the outer approximation method. The proposed solution approach iterates between a mixed-integer linear programming and a nonlinear subproblem. Additional enhancements to further accelerate the iteration process are illustrated. Numerical case studies demonstrate the relative economic and operational impact of optimal network topology with node-breaker representations.

42 ENGINEERING↗

Efficient GPU Implementation of Automatic Differentiation for Computational Fluid Dynamics

Many scientific and engineering applications require repeated calculations of derivatives of output functions with respect to input parameters. Automatic Differentiation (AD) is a method that automates derivative calculations and can significantly speed up code development. In Computational Fluid Dynamics (CFD), derivatives of flux functions with respect to state variables (Jacobian) are needed for efficient solutions of the nonlinear governing equations. AD of flux functions on graphics processing units (GPUs) is challenging as flux computations involve many intermediate variables that create high register pressure and require significant memory traffic because of the need to store the derivatives. This paper presents a forward-mode AD method based on multivariate dual numbers that addresses these challenges and simultaneously reduces the floating-point operation count. The dimension of the multivariate dual numbers is optimized for performance. The flux computations are restructured to minimize the number of temporary variables and reduce register pressure. For effective utilization of memory bandwidth, shared memory is used to store the local flux Jacobian. This AD implementation is compared with several other Jacobian implementations on an NVIDIA V100 GPU (V100). For three-dimensional perfect-gas compressible-flow equations implemented in a practical CFD code, the AD implementation of a flux Jacobian based on multivariate dual numbers of dimension 5 outperforms all other GPU AD implementations on V100. Its performance is comparable with the optimized hand-differentiated version. Finally, the implementation achieves 75% of the peak floating-point throughput and 61 % of the peak global device memory bandwidth usage.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Simulation of the absorption of a femtosecond laser pulse in crystalline silicon

The effect of the nonlinearity of the absorptivity and absorption coefficient on the process of the intense photoexcitation of silicon is studied on the basis of a model of the two-photon excitation of a semiconductor with consideration for external emission. Correlation between the results of simulation of the absorption of a femtosecond laser pulse in single-crystal silicon and experimental data under conditions of the femtosecond excitation of surface plasmon polaritons makes it possible to refine the mechanism of changes in the absorptivity and to make an inference regarding the necessity of considering these changes when assessing the conditions of the laser treatment of semiconductors. Avenues for further improvement of the theoretical model are discussed.

36 MATERIALS SCIENCE↗

High speed laser-induced refractive index change in ophthalmic HEMA hydrogel using a line focus

Laser-induced refractive index change (LIRIC) techniques typically focus femtosecond laser pulses to a tight spot to achieve the high intensities required to alter ophthalmic materials. A line-focus implementation using 800 nm pulses at 1 kHz repetition rate has been shown to greatly increase the effective writing speed of the process, but the high pulse energies used led to nonlinear propagation effects, presenting challenges for the fabrication of ophthalmic correctors. By taking advantage of the lower effective order of multiphoton absorption for 514 nm pulses, power levels may be reduced, allowing overlapped pulse writing. We demonstrate that this allows high-quality phase bars and devices to be made at high speeds.

Manning, Zachary A. [University of Rochester, NY (↗

Volmer-Weber Growth of Nanoscale Self-Assembled Quantum Dots

Our research has focused on the fundamental understanding of the physical mechanisms and experimental methodologies to probe various growth conditions, their effects on density, size uniformity, and spatial organization of self-assembled quantum dots (SAQDs). Theoretical models and numerical simulations have been developed to understand the nonlinear dynamics of surface pattern evolution and self assembly processes. Fabrication processes of semiconductor and metal SAQDs on high-k dielectrics have been developed, which have enabled the technology development of high-speed, low-power nonvolatile memory devices for nanoelectronics applications. Over the four years of the project, six graduate students have been trained in this research project, and four of them have graduated with PhD degrees. Our research has been reported in 11 journal articles. Both PIs and their students have given numerous presentations at national/international conferences as well as invited seminars. A list of publications and presentations is attached to the end of this report.

36 MATERIALS SCIENCE↗

Introduction to Mixed Variable Optimization (MVO) [Slides]

Mixed Variable Optimization (MVO) is an optimization method that uses discrete (categorical) and continuous variables in its optimization process. This method of optimization is applicable to highly nonlinear problems where the information used in the optimization is of poor quality of has minor inaccuracies in the data sets.

97 MATHEMATICS AND COMPUTING↗

Error minimizing algorithms for nearest eighbor classifiers

Stack Filters define a large class of discrete nonlinear filter first introd uced in image and signal processing for noise removal. In recent years we have suggested their application to classification problems, and investigated their relationship to other types of discrete classifiers such as Decision Trees. In this paper we focus on a continuous domain version of Stack Filter Classifiers which we call Ordered Hypothesis Machines (OHM), and investigate their relationship to Nearest Neighbor classifiers. We show that OHM classifiers provide a novel framework in which to train Nearest Neighbor type classifiers by minimizing empirical error based loss functions. We use the framework to investigate a new cost sensitive loss function that allows us to train a Nearest Neighbor type classifier for low false alarm rate applications. We report results on both synthetic data and real-world image data.

97 MATHEMATICS AND COMPUTING↗

Dynamical Systems in Circuit Designer's Eyes

Examples of nonlinear circuit design are given. Focus of the design process is on theory and engineering methods (as opposed to numerical analysis). Modeling is related to measurements It is seen that the phase plane is still very useful with proper models Harmonic balance/describing function offers powerful insight (via the combination of simulation with circuit and ODE theory). Measurement and simulation capabilities increased, especially harmonics measurements (since sinusoids are easy to generate)

42 ENGINEERING↗

Nonlinear phase field model for electrodeposition in electrochemical systems

A nonlinear phase-field model has been developed for describing the electrodeposition process in electrochemical systems that are highly out of equilibrium. Main thermodynamic driving forces for the electrode-electrolyte interface (EEI) evolution are limited to local variations of overpotential and ion concentration. Application of the model to Li-ion batteries describes the electrode interface motion and morphology change caused by charge mass transfer in the electrolyte, an electrochemical reaction at the EEI and cation deposition on the electrode surface during the charging operation. The Li electrodeposition rate follows the classical Butler-Volmer kinetics with exponentially and linearly depending on local overpotential and cation concentration at the electrode surface, respectively. Simulation results show that the Li deposit forms a fiber-like shape and grows parallel to the electric field direction. The longer and thicker deposits are observed both for higher current density and larger rate constant where the surface reaction rate is expected to be high. The proposed diffuse interface model well captures the metal electrodeposition phenomena in plenty of non-equilibrium electrochemical systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hot Deformation Characteristics and Processing Map of FV520B Martensitic Precipitation-Hardened Stainless Steel

Hot deformation characteristics of FV520B martensitic precipitation-hardened stainless steel were investigated in the temperature range of 850-1150 °C and strain rate range of 0.005-0.5 s{sup −1} with true strain 0.8 by using Gleeble-3500 thermo-mechanical simulator. Critical stress and corresponding critical strain for dynamic recrystallization initiation were calculated. The constitutive equation was developed by employing Arrhenius constitutive model to represent the nonlinear relationship of true stress and deformation parameters including temperature, strain rate and strain. The correlation coefficient and average absolute relative error are 0.9979 and 2.225%, which indicates the good predictive accuracy of the established constitutive equations. Processing maps were constructed at different plastic strains levels based on dynamic material model (DMM) and established constitutive equation. Combining the processing map with microstructure, the optimum region for good workability is designated as the temperature range of 1050-1125 °C and strain rate range of 0.027-0.23 s{sup −1} with peak efficiency of 0.32. Homogeneous fine and equiaxed dynamic recrystallization (DRX) grains can be found in this optimum according to the microstructure metallographic pictures.

36 MATERIALS SCIENCE↗

On random fuzzy fractional partial integro-differential equations under Caputo generalized Hukuhara differentiability

This paper is devoted to the study of the solvability of random fuzzy fractional partial integro-differential equations under Caputo generalized Hukuhara differentiability. The notions of random fuzzy variables and fuzzy stochastic processes are developed for multivariable functions. The existence and uniqueness of two types of integral solutions generated from Darboux problem for nonlinear wave equations are proved using the successive approximations method and Gronwall’s inequality for stochastic processes. The continuous dependence on the data, the boundedness, and the stability with probability one of integral solutions are established to confirm the well posedness of our model. Some computational examples are presented to illustrate the theoretical results.

97 MATHEMATICS AND COMPUTING↗