Search NASA⌕ Search

SEARCH · Search NASA

Results for “Numerical Method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Designing high-power, octave spanning entangled photon sources for quantum spectroscopy

Entangled photon spectroscopy is a nascent field that has important implications for measurement and imaging across chemical, biology, and materials fields. Entangled photon spectroscopy potentially offers improved spatial and temporal-frequency resolutions, increased cross sections for multiphoton and nonlinear measurements, and new abilities in inducing or measuring quantum correlations. A critical step in enabling entangled photon spectroscopies is the creation of high-flux entangled sources that can use conventional detectors as well as provide redundancy for the losses in realistic samples. Here, we report a periodically poled, chirped, lithium tantalate platform that generates entangled photon pairs with ~10 -7 efficiency. For a near watt level diode laser, this results in a near μW-level flux. The single photon per mode limit that is necessary to maintain non-classical photon behavior is still satisfied by distributing this power over up to an octave-spanning bandwidth. The spectral–temporal photon correlations are observed via a Michelson-type interferometer that measures the broadband Hong–Ou–Mandel two-photon interference. A coherence time of 245 fs for a 10 nm bandwidth in the collinear case and a coherence time of 62 fs for a 125 nm bandwidth in the non-collinear case are measured using a CW pump laser and, essentially, collecting the full photon cone. We outline in detail the numerical methods used for designing and tailoring the entangled photons source, such as changing center wavelength or bandwidth, with the ultimate aim of increasing the availability of high-flux UV–Vis entangled photon sources in the optical spectroscopy community.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Learning the structure of wind: A data-driven nonlocal turbulence model for the atmospheric boundary layer

In this work, we develop a novel data-driven approach to modeling the atmospheric boundary layer. This approach leads to a nonlocal, anisotropic synthetic turbulence model which we refer to as the deep rapid distortion (DRD) model. Our approach relies on an operator regression problem that characterizes the best fitting candidate in a general family of nonlocal covariance kernels parameterized in part by a neural network. This family of covariance kernels is expressed in Fourier space and is obtained from approximate solutions to the Navier–Stokes equations at very high Reynolds numbers. Each member of the family incorporates important physical properties such as mass conservation and a realistic energy cascade. The DRD model can be calibrated with noisy data from field experiments. After calibration, the model can be used to generate synthetic turbulent velocity fields. To this end, we provide a new numerical method based on domain decomposition which delivers scalable, memory-efficient turbulence generation with the DRD model as well as others. We demonstrate the robustness of our approach with both filtered and noisy data coming from the 1968 Air Force Cambridge Research Laboratory Kansas experiments. Using these data, we witness exceptional accuracy with the DRD model, especially when compared to the International Electrotechnical Commission standard.

17 WIND ENERGY↗

Simulating a pulsed-power-driven plasma with ideal MHD

We describe a simple practical numerical method for simulating plasma driven within a vacuum chamber by a pulsed power generator. Typically, in this type of simulation, the vacuum region adjacent to the plasma is approximated as a highly resistive, light fluid; this involves computationally expensive solvers describing the diffusion of the magnetic field through this fluid. Instead, we provide a recipe for coupling pulsed power generators to the magnetohydrodynamics (MHD) domain by approximating the perfectly insulating vacuum as a light, perfectly conducting, inviscid MHD fluid and discuss the applicability of this counter-intuitive technique. This much more affordable ideal MHD representation is particularly useful in situations where a plasma exhibits interesting three-dimensional phenomena, either due to the design of the experiment or due to developing instabilities. We verified that this coupling recipe works by modeling an exactly solvable flux compression generator as well as a self-similar Noh-like solution and demonstrated convergence to the theoretical solution. We also showed examples of simulating complex three-dimensional pulsed power devices with this technique. We release our code implementation to the public.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Anion diffusion in two-dimensional halide perovskites

Commercialization of halide perovskites in the semiconductor industry is hindered by their short-term stability. The instability of perovskites is closely interlinked with ionic diffusion. Historically, attempts to study diffusion in 2D perovskites mostly utilized electrical characterizations, but these characterizations pose a challenge in deconvoluting the impact of device architecture, interlayers, and ionic species. In this Perspective, we focus our attention on simple optical characterizations employed in the literature to investigate halide diffusion in 2D perovskites using lateral and vertical heterostructure platforms. We review the various synthesis techniques used for fabrication of halide perovskite heterostructures and discuss the qualitative and quantitative diffusion studies performed using these platforms. We discuss the numerical methods used to validate and supplement the experimental halide diffusion kinetics. Finally, we highlight the need to conduct further research on the impact of device operating conditions, lattice structure, and vacancy concentration on halide diffusion. Through this Perspective, we aim to emphasize the need of developing a comprehensive understanding of halide diffusion in perovskites for their successful deployment in optoelectronics.

36 MATERIALS SCIENCE↗

Parametric dependencies of resonant layer responses across linear, two-fluid, drift-MHD regimes

Non-axisymmetric magnetic fields arising in a tokamak either by external or internal perturbations can induce complex non-ideal MHD responses in their resonant surfaces while remaining ideally evolved elsewhere. This layer response can be characterized in a linear regime by a single parameter called the inner-layer Δ, which enables outer-layer matching and the prediction of torque balance to non-linear island regimes. In this work, we follow strictly one of the most comprehensive analytic treatments including two-fluid and drift MHD effects and keep the fidelity of the formulation by incorporating the numerical method based on the Riccati transformation when quantifying the inner-layer Δ. The proposed scheme reproduces not only the predicted responses in essentially all asymptotic regimes but also with continuous transitions as well as improved accuracies. In particular, the Δ variations across the inertial regimes with viscous or semi-collisional effects have been further resolved, in comparison with additional analytic solutions. The results imply greater shielding of the electromagnetic torque at the layer than what would be expected by earlier work when the viscous or semi-collisional effects can compete against the inertial effects, and also due to the intermediate regulation by kinetic Alfvén wave resonances as rotation slows down. These are important features that can alter the non-axisymmetric plasma responses including the field penetration by external fields or island seeding process in rotating tokamak plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Preface for the Sherwood Fusion Theory 2021–2022 special collection

The Sherwood Fusion Theory conference has a 60-year history and has been held nearly annually for at least five decades. With theoretical and computational research directed toward fusion energy as an organizing principle, the typical Sherwood program encompasses a wide range of plasma physics topics pertaining to a variety of confinement concepts along with advancements in algorithms and numerical methods for fusion plasma simulations. Additionally, the typical annual meeting comprises roughly a dozen invited talks plus a small number of plenary speakers and several poster sessions. The program committee presents several awards each year to graduate (or undergraduate) students with outstanding poster presentations. Beginning in 2021, both invited speakers and student poster award winners were asked to submit manuscripts for this special collection, which combines contributions from the 2021 and 2022 Sherwood meetings.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Topanga: A kinetic ion plasma code for large-scale ionospheric simulations on magnetohydrodynamic timescales

Topanga is a kinetic ion code developed for simulating large-scale plasma phenomena in the Earth's ionosphere on magnetohydrodynamic timescales. It is a domain-decomposed parallel code that runs on high-performance computing platforms. Features of Topanga include spherical geometry for simplified boundary conditions and computational efficiency; a hybrid plasma model with inertia-less fluid electrons, kinetic ions, and an electric field specified via an Ohm's law; a Maxwell-FDTD (finite difference time domain) plasma model which retains the displacement current in Maxwell's equations and models electron currents in the ionosphere with a tensor conductivity; sponge-layer boundary conditions for absorption of electromagnetic and plasma waves incident on the domain boundaries; and a novel mixed-implicit algorithm for evolving the EM fields inside the Maxwell-FDTD region that is stable over many orders of magnitude in the electron–ion collision frequency. We verify the numerical methods used in Topanga on a pair of test problems. The first test involves modeling a three-dimensional collisionless shock using the hybrid set of equations. The second test involves modeling a spherical TEM mode in vacuum using the Maxwell-FDTD set of equations. Finally, we demonstrate how using the combined set of hybrid and Maxwell-FDTD equations to model the Starfish Prime high-altitude nuclear test recovers a “missing” EM signal on the ground that is not present when using only the hybrid set of equations. The magnitude of this signal in the simulation containing the Maxwell-FDTD region agrees well with the E3a portion of the magnetohydrodynamic electromagnetic pulse from Starfish Prime.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Design of experiments to spectroscopically characterize radiation flow in stochastic media

Precise characterization of experimental radiation flow is required to validate the high energy density physics models, numerical methods, and codes that are used to simulate radiation-hydrodynamics phenomena such as thermal radiation transport in stochastic media. The Cassio code is used to simulate thermal radiation flow through inhomogeneous, stochastic-media-foam configurations containing optically thick clumps dispersed within an optically thin background aerogel. Cassio can model small inhomogeneous problems directly, but most problems require approximations to meet computer limitations on run-times and memory usage. Various examples of these approximations are methods that produce, in one calculation, an ensemble-averaged solution and associated standard deviation; reduced spatial dimensionality with approximate geometries; and full material homogenization with no geometric detail. Cassio simulations are used to design experiments at the OMEGA-60 Laser Facility that can measure the radiation flow using the spatially resolved COAX absorption spectroscopy diagnostic. The experimental platforms flow radiation through foam targets ranging from a background-only aerogel, to a single configuration of a specified stochastic medium, to a fully homogenized foam of the background and clump materials. Under constant total clump mass, larger clumps (here, larger than 10 μm diameter) will mix more slowly with the background such that the bulk radiation flow is faster than it would be in a fully homogenized material. The COAX platform can be used to infer temperature and density profiles in both the background material and clumps, simultaneously, and therefore to differentiate radiation flow in a range of stochastic and homogeneous media.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Accurate numerical simulations of open quantum systems using spectral tensor trains

Decoherence between qubits is a major bottleneck in quantum computations. Decoherence results from intrinsic quantum and thermal fluctuations as well as noise in the external fields that perform the measurement and preparation processes. With prescribed colored noise spectra for intrinsic and extrinsic noise, we present a numerical method, Quantum Accelerated Stochastic Propagator Evaluation (Q-ASPEN), to solve the time-dependent noise-averaged reduced density matrix in the presence of intrinsic and extrinsic noise. Q-ASPEN is arbitrarily accurate and can be applied to provide estimates for the resources needed to error-correct quantum computations. We employ spectral tensor trains, which combine the advantages of tensor networks and pseudospectral methods, as a variational ansatz to the quantum relaxation problem and optimize the ansatz using methods typically used to train neural networks. Here, the spectral tensor trains in Q-ASPEN make accurate calculations with tens of quantum levels feasible. We present benchmarks for Q-ASPEN on the spin-boson model in the presence of intrinsic noise and on a quantum chain of up to 32 sites in the presence of extrinsic noise. In our benchmark, the memory cost of Q-ASPEN scales as a low-order polynomial in the size of the system once the number of system states surpasses the number of basis functions used in the spectral expansion.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spatio-temporal dynamics of a dual-wavelength vertical-external-cavity surface-emitting semiconductor laser

A mathematical model of a dual-wavelength vertical-external-cavity surface-emitting laser (VECSEL) is formulated with the distribution of optical pumping and generated fields over the beam cross sections taken into account. Dynamic regimes are mapped using the 'pump power - cavity round-trip time' plane. The map comprises regions of cw generation, periodic oscillation, quasiperiodic and chaotic oscillations of the radiation intensity and the carrier density in the active regions of the laser. It is shown that when the reflection coefficient of the external cavity is increased, the regions of complex dynamics in the maps become narrower. Using numerical methods the spatio-temporal dynamics of a dualwavelength VECSEL is analysed in the regime of quasi-periodic oscillations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Superconductivity found in meteorites

Meteorites can contain a wide range of material phases due to the extreme environments found in space and are ideal candidates to search for natural superconductivity. However, meteorites are chemically inhomogeneous, and superconducting phases in them could potentially be minute, rendering detection of these phases difficult. To alleviate this difficulty, we have studied meteorite samples with the ultrasensitive magnetic field modulated microwave spectroscopy (MFMMS) technique [J. G. Ramírez, A. C. Basaran, J. de la Venta, J. Pereiro, I. K. Schuller, Rep. Prog. Phys. 77, 093902 (2014)]. Here, we report the identification of superconducting phases in two meteorites, Mundrabilla, a group IAB iron meteorite [R. Wilson, A. Cooney, Nature 213, 274–275 (1967)] and GRA 95205, a ureilite [J. N. Grossman, Meteorit. Planet. Sci. 33, A221–A239 (1998)]. MFMMS measurements detected superconducting transitions in samples from each, above 5 K. By subdividing and remeasuring individual samples, grains containing the largest superconducting fraction were isolated. The superconducting grains were then characterized with a series of complementary techniques, including vibrating-sample magnetometry (VSM), energy-dispersive X-ray spectroscopy (EDX), and numerical methods. Finally, these measurements and analysis identified the likely phases as alloys of lead, indium, and tin.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

SAM: A Modern System Code for Advanced Non-LWR Safety Analysis

The System Analysis Module (SAM), developed at Argonne National Laboratory and by collaborators at other organizations, is for advanced non–light water reactor safety analysis. SAM aims to provide fast-running, modest-fidelity, whole-plant transient analysis capabilities that are essential for fast-turnaround design scoping and engineering analyses of advanced reactor concepts. To facilitate code development, SAM utilizes the MOOSE object-oriented application framework, its underlying finite element library, and linear and nonlinear solvers to leverage modern advanced software environments and numerical methods. SAM aims to solve tightly coupled physical phenomena, including fission reaction, heat transfer, fluid dynamics, and thermal-mechanical responses in advanced reactor structures, systems, and components with high accuracy and efficiency. Finally, this paper gives an overview of the SAM code development, including goals and functional requirements, physical models, current capabilities, verification and validation, software quality assurance, and examples of simulations for advanced nuclear reactor applications.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Design Optimization of a Criticality Experiment for the Molten Chloride Reactor Experiment Facility

Neutronics simulations of Molten Chloride Fast Reactors have quantifiable biases that arise from nuclear data, modeling choices, or numerical methods. The multiphysics nature of molten salt reactors makes it challenging to disentangle neutronics modeling biases from biases originating from other physical phenomena. In comparison to a mock-up reactor, criticality experiments can specifically assess the neutronics modeling bias while limiting multiphysics effects. The criticality experiment must be neutronically representative of the full-scale reactor to be valuable. Here, in this paper, we describe the design of a criticality experiment to validate only the neutronics of TerraPower’s Molten Chloride Reactor Experiment (MCRE) and its criticality safety upset scenarios. The proposed experiment uses different chlorine-containing materials to maximize its similarity to the MCRE. The design process uses a constrained Bayesian optimization algorithm to investigate different objective functions that use covariance information for 35 Cl nuclear data. The experiments could reduce the nuclear data–induced uncertainty in k eff of the MCRE from 2161 to 886 pcm. They would also increase the upper subcritical limit of the MCRE criticality safety upset scenario from 0.94101 to 0.94476 when using the WHISPER analysis framework.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

RING EDGE WAVES AND THE MASSES OF NEARBY SATELLITES

Moons embedded in gaps within Saturn's main rings generate waves on the gap edges due to their gravitational disturbances. These edge waves can serve as diagnostics for the masses and, in some cases, orbital characteristics of the embedded moons. Although N-body simulations of the edges are far better in inferring masses from edge morphology, the long run-times of this technique often make it impractical. In this paper, we describe a faster approach to narrow the range of masses to explore with N-body simulations, to explore the multidimensional parameter space of edge/moon interactions, and to guide the planning of spacecraft observations. Using numerical, test-particle models and neglecting particle-particle interactions, we demonstrate that the simple analytic theory of the edge waves applies well to Pan in the Encke Gap but breaks down for smaller moons/gaps like Daphnis in the Keeler Gap. Fitting an analytic model to our simulation results allows us to suggest an improved relationship between moon-mass and edge wave amplitude. Numerical methods also grant freedom to explore a wider range of moon and ring orbits than the circular, coplanar case considered by analytic theory. We examine how pre-encounter inclinations and eccentricities affect the properties of the edge waves. In the case where the moon or ring-edge particle orbits initially have eccentric radial variations that are large compared to the gap width, there is considerable variation in edge wave amplitude depending on the orbital phase of the encounter. Inclined moons also affect the edge wave amplitude, potentially significantly, as well as generate vertical waves on the gap-edges. Recent Cassini images acquired as Saturn approaches equinox and the Sun's elevation on the ringplane is extremely low have revealed long shadows associated with the Keeler gap edge waves created by the embedded moon Daphnis. We interpret these as being cast by {approx}1 km high vertical structure in the waves created by Daphnis' out-of-plane perturbations on the ring particles.

79 ASTRONOMY AND ASTROPHYSICS↗

MAGNETIC BRAIDING AND PARALLEL ELECTRIC FIELDS

The braiding of the solar coronal magnetic field via photospheric motions-with subsequent relaxation and magnetic reconnection-is one of the most widely debated ideas of solar physics. We readdress the theory in light of developments in three-dimensional magnetic reconnection theory. It is known that the integrated parallel electric field along field lines is the key quantity determining the rate of reconnection, in contrast with the two-dimensional case where the electric field itself is the important quantity. We demonstrate that this difference becomes crucial for sufficiently complex magnetic field structures. A numerical method is used to relax a braided magnetic field toward an ideal force-free equilibrium; the field is found to remain smooth throughout the relaxation, with only large-scale current structures. However, a highly filamentary integrated parallel current structure with extremely short length-scales is found in the field, with the associated gradients intensifying during the relaxation process. An analytical model is developed to show that, in a coronal situation, the length scales associated with the integrated parallel current structures will rapidly decrease with increasing complexity, or degree of braiding, of the magnetic field. Analysis shows the decrease in these length scales will, for any finite resistivity, eventually become inconsistent with the stability of the coronal field. Thus the inevitable consequence of the magnetic braiding process is a loss of equilibrium of the magnetic field, probably via magnetic reconnection events.

79 ASTRONOMY AND ASTROPHYSICS↗

RECONSTRUCTING THE LOCAL TWIST OF CORONAL MAGNETIC FIELDS AND THE THREE-DIMENSIONAL SHAPE OF THE FIELD LINES FROM CORONAL LOOPS IN EXTREME-ULTRAVIOLET AND X-RAY IMAGES

Nonlinear force-free fields are the most general case of force-free fields, but the hardest to model as well. There are numerous methods of computing such fields by extrapolating vector magnetograms from the photosphere, but very few attempts have so far made quantitative use of coronal morphology. We present a method to make such quantitative use of X-ray and EUV images of coronal loops. Each individual loop is fit to a field line of a linear force-free field, allowing the estimation of the field line's twist, three-dimensional geometry, and the field strength along it. We assess the validity of such a reconstruction since the actual corona is probably not a linear force-free field, and that the superposition of linear force-free fields is generally not itself a force-free field. To do so, we perform a series of tests on nonlinear force-free fields, described in Low and Lou. For model loops we project field lines onto the photosphere. We compare several results of the method with the original field, in particular the three-dimensional loop shapes, local twist (coronal alpha), distribution of twist in the model photosphere, and strength of the magnetic field. We find that (1) for these trial fields, the method reconstructs twist with a mean absolute deviation of at most 15% of the range of photospheric twist, (2) heights of the loops are reconstructed with a mean absolute deviation of at most 5% of the range of trial heights, and (3) the magnitude of non-potential contribution to a photospheric field is reconstructed with a mean absolute deviation of at most 10% of the maximal value.

07 ISOTOPE AND RADIATION SOURCES↗

NUMERICAL MODELING OF THE COAGULATION AND POROSITY EVOLUTION OF DUST AGGREGATES

Porosity evolution of dust aggregates is crucial in understanding dust evolution in protoplanetary disks. In this study, we present useful tools to study the coagulation and porosity evolution of dust aggregates. First, we present a new numerical method for simulating dust coagulation and porosity evolution as an extension of the conventional Smoluchowski equation. This method follows the evolution of the mean porosity for each aggregate mass simultaneously with the evolution of the mass distribution function. This method reproduces the results of previous Monte Carlo simulations with much less computational expense. Second, we propose a new collision model for porous dust aggregates on the basis of our N-body experiments on aggregate collisions. As the first step, we focus on 'hit-and-stick' collisions, which involve neither compression nor fragmentation of aggregates. We first obtain empirical data on porosity changes between the classical limits of ballistic cluster-cluster and particle-cluster aggregation. Using the data, we construct a recipe for the porosity change due to general hit-and-stick collisions as well as formulae for the aerodynamical and collisional cross sections. Our collision model is thus more realistic than a previous model of Ormel et al. based on the classical aggregation limits only. Simple coagulation simulations using the extended Smoluchowski method show that our collision model explains the fractal dimensions of porous aggregates observed in a full N-body simulation and a laboratory experiment. By contrast, similar simulations using the collision model of Ormel et al. result in much less porous aggregates, meaning that this model underestimates the porosity increase upon unequal-sized collisions. Besides, we discover that aggregates at the high-mass end of the distribution can have a considerably small aerodynamical cross section per unit mass compared with aggregates of lower masses. This occurs when aggregates drift under uniform acceleration (e.g., gravity) and their collision is induced by the difference in their terminal velocities. We point out an important implication of this discovery for dust growth in protoplanetary disks.

79 ASTRONOMY AND ASTROPHYSICS↗

Lyalpha EMISSION FROM COSMIC STRUCTURE. I. FLUORESCENCE

We present predictions for the fluorescent Lyalpha emission signature arising from photoionized, optically thick structures in smoothed particle hydrodynamic cosmological simulations of a LAMBDACDM universe using a Monte Carlo Lyalpha radiative transfer code. We calculate the expected Lyalpha image and two-dimensional spectra for gas exposed to a uniform ultraviolet ionizing background as well as gas exposed additionally to the photoionizing radiation from a local quasar, after correcting for the self-shielding of hydrogen. As a test of our numerical methods and for application to current observations, we examine simplified analytic structures that are uniformly or anisotropically illuminated. We compare these results with recent observations. We discuss future observing campaigns on large telescopes and realistic strategies for detecting fluorescence owing to the ambient metagalactic ionization and in regions close to bright quasars. While it will take hundreds of hours on the current generation of telescopes to detect fluorescence caused by the ultraviolet background alone, our calculations suggest that on the order of 10 sources of quasar-induced fluorescent Lyalpha emission should be detectable after a 10 hr exposure in a 10 arcmin{sup 2} field around a bright quasar. These observations will help probe the physical conditions in the densest regions of the intergalactic medium as well as the temporal light curves and isotropy of quasar radiation.

79 ASTRONOMY AND ASTROPHYSICS↗