Search NASA⌕ Search

SEARCH · Search NASA

Results for “PHASE STABILITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Gain, phase and frequency stability of DSS-42 and DSS-43 vor Voyage Uranus encounter

Theoretically rigorous definitions are derived of such parameters as RF signal path length, phase delay, and phase/frequency stability in a Cassegrainian antenna applicable to a narrow bandwidth channel, as well as algorithms for evaluating these parameters. This work was performed in support of the Voyager spacecraft encounter with Uranus in January 1986. The information was needed to provide Voyager/Uranus radio science researchers with a rotational basis for deciding the best strategy to operate the three antennas involved during the crucial 5-hour occultation period of the encounter. Such recommendations are made at the end of the article.

Cha, A. G.↗
DOE OSTI2016

Mixed cation FA x PEA 1- x PbI 3 with enhanced phase and ambient stability toward high-performance perovskite solar cells

In this study, different from the commonly explored strategy of incorporating a smaller cation, MA + and Cs + into FAPbI 3 lattice to improve efficiency and stability, it is revealed that the introduction of phenylethylammonium iodide (PEAI) into FAPbI 3 perovksite to form mixed cation FA x PEA 1–x PbI 3 can effectively enhance both phase and ambient stability of FAPbI 3 as well as the resulting performance of the derived devices. From our experimental and theoretical calculation results, it is proposed that the larger PEA cation is capable of assembling on both the lattice surface and grain boundaries to form quais-3D perovskite structures. The surrounding of PEA + ions at the crystal grain boundaries not only can serve as molecular locks to tighten FAPbI 3 domains but also passivate the surface defects to improve both phase and moisture stablity. Consequently, a high-performance (PCE:17.7%) and ambient stable FAPbI 3 solar cell could be developed

14 SOLAR ENERGY↗
NASA NTRS1993

Stability of oscillatory two phase Couette flow

We investigate the stability of two phase Couette flow of different liquids bounded between plane parallel plates. One of the plates has a time dependent velocity in its own plane, which is composed of a constant steady part and a time harmonic component. In the absence of time harmonic modulations, the flow can be unstable to an interfacial instability if the viscosities are different and the more viscous fluid occupies the thinner of the two layers. Using Floquet theory, we show analytically in the limit of long waves, that time periodic modulations in the basic flow can have a significant influence on flow stability. In particular, flows which are otherwise unstable for extensive ranges of viscosity ratios, can be stabilized completely by the inclusion of background modulations, a finding that can have useful consequences in many practical applications.

Coward, Adrian V.↗
DOE OSTI2014

Analysis of double stub tuner control stability in a phased array antenna with strong cross-coupling

Active stub tuning with a fast ferrite tuner (FFT) has greatly increased the ability of fusion ion cyclotron range of frequency (ICRF) systems (50–100 MHz) by allowing for the antenna system to respond dynamically to changes in the plasma load impedance such as during the L–H transition or edge localized modes (ELMs). A high power waveguide double-stub tuner is under development for use with the Alcator C-Mod lower hybrid current drive (LHCD) system at 4.6 GHz. The amplitude and relative phase shift between adjacent columns of an LHCD antenna are critical for control of the launched n || spectrum. Adding a double-stub tuning network will perturb the phase and amplitude of the forward wave particularly if the unmatched reflection coefficient is high. This effect can be compensated by adjusting the phase of the low power microwave drive for each klystron amplifier. Cross-coupling of the reflected power between columns of the launcher must also be considered. The problem is simulated by cascading a scattering matrix for the plasma provided by a linear coupling model with the measured launcher scattering matrix and that of the FFTs. The solution is advanced in an iterative manner similar to the time-dependent behavior of the real system. System performance is presented under a range of edge density conditions from under-dense to over-dense and a range of launched n || . Simulations suggest power reflection coefficients (Γ 2 ) of less than 1% with no contamination of the n || spectrum. Instability of the FFT tuning network can be difficult for certain plasma conditions and relative phasings, but reducing the control gain of the FFT network stabilizes the system.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2015

Effect of Si additions on thermal stability and the phase transition sequence of sputtered amorphous alumina thin films

Si-alloyed amorphous alumina coatings having a silicon concentration of 0 to 2.7 at. % were deposited by combinatorial reactive pulsed DC magnetron sputtering of Al and Al-Si (90-10 at. %) split segments in Ar/O{sub 2} atmosphere. The effect of Si alloying on thermal stability of the as-deposited amorphous alumina thin films and the phase formation sequence was evaluated by using differential scanning calorimetry and X-ray diffraction. The thermal stability window of the amorphous phase containing 2.7 at. % of Si was increased by more than 100 °C compared to that of the unalloyed phase. A similar retarding effect of Si alloying was also observed for the α-Al{sub 2}O{sub 3} formation temperature, which increased by more than 120 °C. While for the latter retardation, the evidence for the presence of SiO{sub 2} at the grain boundaries was presented previously, this obviously cannot explain the stability enhancement reported here for the amorphous phase. Based on density functional theory molecular dynamics simulations and synchrotron X-ray diffraction experiments for amorphous Al{sub 2}O{sub 3} with and without Si incorporation, we suggest that the experimentally identified enhanced thermal stability of amorphous alumina with addition of Si is due to the formation of shorter and stronger Si–O bonds as compared to Al–O bonds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

On the stability of the disordered molecular alloy phase of ammonia hemihydrate

The disordered-molecular-alloy phase (DMA) of ammonia hydrates [J. S. Loveday and R. J. Nelmes, Phys. Rev. Lett. 83, 4329 (1999)] is unique in that it has substitutional disorder of ammonia and water over the molecular sites of a body centred cubic lattice. Whilst this structure has been observed in ammonia di- and mono-hydrate compositions, it has not been conclusively observed in the ammonia hemihydrate system. This work presents investigations of the structural behaviour of ammonia hemihydrate as a function of P and T. The indications of earlier studies [Ma et al. RSC Adv. 2, 4290 (2012)] that the DMA structure could be produced by compression of ammonia hemihydrate above 20 GPa at ambient temperature are confirmed. In addition, the DMA structure was found to form reversibly both from the melt, and on warming of ammonia hemihydrate phase-II, in the pressure range between 4 and 8 GPa. The route used to make the DMA structure from ammonia mono- and di-hydrates—compression at 170 K to 6 GPa followed by warming to ambient temperature—was found not to produce the DMA structure for ammonia hemihydrate. These results provide the first strong evidence that DMA is a thermodynamically stable form. A high-pressure phase diagram for ammonia hemihydrate is proposed which has importance for planetary modelling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Revealing the Nature of Binary-Phase on Structural Stability of Sodium Layered Oxide Cathodes

The emergence of layered sodium transition metal oxides featuring a multiphase structure presents a promising approach for cathode materials in sodium-ion batteries, showcasing notably improved energy storage capacity. However, the advancement of cathodes with multiphase structures faces obstacles due to the limited understanding of the integrated structural effects. Herein, the integrated structural effects by an in-depth structure-chemistry analysis in the developed layered cathode system Na x Cu 0.1 Co 0.1 Ni 0.25 Mn 0.4 Ti 0.15 O 2 with purposely designed P2/O3 phase integration, are comprehended. The results affirm that integrated phase ratio plays a pivotal role in electrochemical/structural stability, particularly at high voltage and with the incorporation of anionic redox. In contrast to previous reports advocating solely for the enhanced electrochemical performance in biphasic structures, it is demonstrated that an inappropriate composite structure is more destructive than a single-phase design. The in situ X-ray diffraction results, coupled with density functional theory computations further confirm that the biphasic structure with P2:O3 = 4:6 shows suppressed irreversible phase transition at high desodiated states and thus exhibits optimized electrochemical performance. Finally, these fundamental discoveries provide clues to the design of high-performance layered oxide cathodes for next-generation SIBs.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Strain-induced antipolar phase in hafnia stabilizes robust thin-film ferroelectricity

Hafnia (HfO 2 ) is a promising candidate for next-generation ferroelectric devices due to its robust ferroelectricity at reduced dimensions and its compatibility with silicon technology. Unfortunately, the origin of robust ferroelectricity and the underlying phase transition mechanism in HfO 2 remain elusive. Here, we show that its ferroelectricity arises from two phase transitions, where the primary phase transition to antipolar phase is activated by tensile strain. Above a threshold antipolar mode amplitude, a strong cooperative polar-antipolar coupling enables a second ferroelectric phase transition superimposed on the antipolar phase. Because the antipolar mode is not susceptible to depolarization, this polar-antipolar coupling stabilizes the polarization against depolarization effects. Our results demonstrate that tensile strain and polar-antipolar coupling are the origins of ferroelectricity in HfO 2 and provide a previously unknown mechanism against depolarization other than conventional improper ferroelectricity.

36 MATERIALS SCIENCE↗
DOE OSTI2017

High Thermoelectric Performance of New Rhombohedral Phase of GeSe stabilized through Alloying with AgSbSe 2

GeSe is a IV–VI semiconductor, like the excellent thermoelectric materials PbTe and SnSe. Orthorhombic GeSe has been predicted theoretically to have good thermoelectric performance but is difficult to dope experimentally. Like PbTe, rhombohedral GeTe has a multivalley band structure, which is ideal for thermoelectrics and also promotes the formation of Ge vacancies to provide enough carriers for electrical transport. Herein, we investigate the thermoelectric properties of GeSe alloyed with AgSbSe 2 , which stabilizes a new rhombohedral structure with higher symmetry that leads to a multivalley Fermi surface and a dramatic increase in carrier concentration. The z T of GeAg 0.2 Sb 0.2 Se 1.4 reaches 0.86 at 710 K, which is 18 times higher than that of pristine GeSe and over four times higher than doped orthorhombic GeSe. Our results open a new avenue towards developing novel thermoelectric materials through crystal phase engineering using a strategy of entropy stabilization of high-symmetry alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2018

On the structure of the drifton phase space and its relation to the Rayleigh–Kuo criterion of the zonal-flow stability

The phase space of driftons (drift-wave quanta) is studied within the generalized Hasegawa–Mima collisionless-plasma model in the presence of zonal flows. This phase space is made intricate by the corrections to the drifton ray equations that were recently proposed by Parker [J. Plasma Phys. 82, 595820602 (2016)] and Ruiz et al. [Phys. Plasmas 23, 122304 (2016)]. Contrary to the traditional geometrical-optics (GO) model of the drifton dynamics, it is found that driftons can not only be trapped or passing but also accumulate spatially while experiencing indefinite growth of their momenta. In particular, it is found that the Rayleigh–Kuo threshold known from geophysics corresponds to the regime when such “runaway” trajectories are the only ones possible. On one hand, this analysis helps to visualize the development of the zonostrophic instability, particularly its nonlinear stage, which is studied here both analytically and through wave-kinetic simulations. On the other hand, the GO theory predicts that zonal flows above the Rayleigh–Kuo threshold can only grow; hence, the deterioration of intense zonal flows cannot be captured within a GO model. In particular, this means that the so-called tertiary instability of intense zonal flows cannot be adequately described within the quasilinear wave kinetic equation, contrary to some previous studies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2015

Stability of organometal perovskites with organic overlayers

The air-stability of vapour-phase-deposited methylammonium lead triiodide (CH{sub 3}NH{sub 3}PbI{sub 3}) perovskite thin films has been studied using X-ray diffraction. It is found that the perovskite structure without organic coating decomposes completely within a short period of time (∼two days) upon exposure to ambient environment. The degradation of the perovskite structure is drastically reduced when the perovskite films are capped with thin N,N′-Di(1-naphthyl)-N,N′-diphenyl-(1,1′-biphenyl)-4,4′-diamine (NPB) films. We discovered that the amount of lead iodide (PbI{sub 2}), a product of the degradation, grows as a function of time in a sigmoidal manner. Further mathematical modeling analysis shows that the perovskite degradation follows the Avrami equation, a kinetics theory developed for quantifying phase transformations in solid-state materials.

36 MATERIALS SCIENCE↗
NASA NTRS2010

Absolute Stability Analysis of a Phase Plane Controlled Spacecraft

Many aerospace attitude control systems utilize phase plane control schemes that include nonlinear elements such as dead zone and ideal relay. To evaluate phase plane control robustness, stability margin prediction methods must be developed. Absolute stability is extended to predict stability margins and to define an abort condition. A constrained optimization approach is also used to design flex filters for roll control. The design goal is to optimize vehicle tracking performance while maintaining adequate stability margins. Absolute stability is shown to provide satisfactory stability constraints for the optimization.

Jang, Jiann-Woei↗
DOE OSTI2018

Structural-Phase Features of Low-Stability Pre-Transitional States of BCC-Alloys with Complexes of Planar Defects (Antiphase Boundaries)

Using the Monte Carlo method, the influence of the complexes of antiphase boundaries (APBs) (a pair of shear APBs and a pair of thermal APBs) on the low-stability, pre-transitional states of BCC-alloys is considered by the example of a conventional copper alloy CuZn and an intermetallic compound NiAl. It is shown that in the region of low-stability structural-phase states the energy of formation of a complex of thermal APBs is higher than that of shear APBs. The contribution of APBs into disordering is appreciable up to the structural-phase transition temperature. The most significant factor in terms of the long-range order is the formation of the defect itself; the differences in the APB type or the plane of their occurrence do not so much affect the longrange order behavior with the temperature variation. The type of APBs however appreciably affects the structural-energy characteristics of the system at the temperatures below the phase transformation temperature. Logically, a system with structural defects is less ordered than a defect-free system. The presence of a defect favors the onset of disordering at lower temperatures: it starts at lower temperatures in the case of thermal APBs (TAPBs) compared to shear APBs (TAPBs). In a BCC-system with a complex of TAPBs the first signs of disordering invariably appear near the phase boundary in the neighborhood of large atoms (Zn–Zn in the CuZn alloy or Al–Al in the NiAl intermetallide). In the alloy with a complex of shear APBs the distortion of ordering at low temperatures is observed in the regions where the boundaries cross. The presence of antiphase boundaries affects the alloy stability under heating. It is shown that disordering is accompanied by smearing of the boundaries and their faceting. It follows from a comparative analysis of the peculiarities of disordering in the BCC-system under study (classical alloy CuZn and intermetallide NiAl) under conditions of higher temperatures in the region of low-stability, pre-transitional states that the order – disorder phase transition in the CuZn alloy takes place as a result of disordering of the system, while in the intermetallide NiAl the change of long-range order results from the structural-phase transition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗