Search NASA⌕ Search

SEARCH · Search NASA

Results for “PRISMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Broadly tunable high-power operation of an all-solid-state titanium-doped sapphire laser system

Broadly tunable and high-power operation of a Ti-doped sapphire laser is obtained with a diode-laser-pumped frequency-doubled Nd:YAG laser as the pump source. A maximum broadband (FWHM = 25 nm) output pulse energy of 720 microJ at 795 nm in a TEM00 mode is obtained for 1850 microJ of energy of 532-nm pump light. A minimum pulse duration of 7 nsec is obtained from a 40-mm-long cavity. With the use of an intracavity prism, the Ti:sapphire laser is tunable continuously over the 696-1000-nm spectral range (with three different mirror sets).

Steele, T. R.↗

Spectral types of stars in the SMC associations NGC456, NGC460a, b and NGC465

Spectral types of stars for an extended area (1200 sq arcmin) of the SMC, containing the associations NGC456, NGC460 a, b and NGC465 have been derived here. High-quality UJ and YJ film copies of objective prism plates taken with the 1.2-m UK Schmidt telescope were used. The medium dispersion spectral (830 A/mm) were digitized with a PDS microdensitometer and spectra types of stars were obtained down to about 16.5 mag. A computer interactive method of reduction has been developed, and the spectral types obtained are accurate to 0.3 spectral subtypes. Spectral classification for the low (2440 A/mm) dispersion spectra down to 18.5 mag was carried out visually using a binocular microscope. The frequency distributions of stars in the associations region, after subtracting the field stars, have revealed that only blue main sequence stars are their members.

Dapergolas, A.↗

Development of a Fabry-Perot interferometer for rocket engine plume monitoring

The development of a lightweight, compact, high-resolution Fabry-Perot interferometer (FPI) based spectrometer capable of detecting the spectral signatures of eroding engine components during test and/or flight operations is discussed. FPI based spectrometers will be designed to be smaller and lighter than grating or prism type devices and to provide greater wavelength resolving capability. The FPI system seeks to combine the features of high line resolution, active background discrimination, smart digital signal processing, and rocket engine flight capability. The design, fabrication, and test of a breadboard FPI spectrometer have been completed and the breadboard instrument has clearly demonstrated the viability of the approach. The breadboard instrument design and test results are also presented.

Bickford, R. L.↗

Spectral dispersion and fringe detection in IOTA

Pupil plane beam combination, spectral dispersion, detection, and fringe tracking are discussed for the IOTA interferometer. A new spectrometer design is presented in which the angular dispersion with respect to wavenumber is nearly constant. The dispersing element is a type of grism, a series combination of grating and prism, in which the constant parts of the dispersion add, but the slopes cancel. This grism is optimized for the display of channelled spectra. The dispersed fringes can be tracked by a matched-filter photon-counting correlator algorithm. This algorithm requires very few arithmetic operations per detected photon, making it well-suited for real-time fringe tracking. The algorithm is able to adapt to different stellar spectral types, intensity levels, and atmospheric time constants. The results of numerical experiments are reported.

Traub, W. A.↗

Radiation effects on various optical components for the Mars Observer spacecraft

The performance of selected optical parts of the Mars Observer Laser Altimeter (MOLA) is considered. Test results indicate that Schott RG-830, RG-850 filter glass, and the Rolyn Optics Neutral Density filters are essentially immune to levels of radiation an order of magnitude larger than that expected for the MOLA spacecraft. The Corion LG-840 filters are shown to be relatively safe for this application, but exposures to levels higher than 15 kilo-rads(Si) have a severe effect on this material. The BK-7 prism appears to be acceptable for the relatively benign environment required for MOLA. It is concluded that the optical performance of the components tested is not degraded by exposure to the whole life dose expected for the Mars Observer.

Lowry, Jay H.↗

Modeling Optics For Analyses Of Dynamics And Controls

Method of computing optical sensitivities of single- and multiple-element optical trains developed for analyses of dynamics of optoelectro-mechanical systems, including controlled optics (lenses, mirrors, prisms, and/or gratings mounted on electromechanical actuators) supported by flexible structure. Based on techniques of ray tracing and on matrix representation of each surface of each optical element.

Breckenridge, William C.↗

Hubble Space Telescope: Fine guidance sensors instrument handbook. Version 2.1

The Fine Guidance Sensors (FGS) are a system of photomultiplier tubes and white light amplitude interferometers (Koester's prism) which are used for the fine guidance of the Hubble Space Telescope (HST). The purpose of the handbook is to provide information to a potential user of the FGS so that he may explore the feasibility of performing various observations. A brief overview is given of how the FGS works, along with an explanation of the instrument in some detail. The procedure for estimating exposure times is explained. The observing modes are described. Some details needed to specify the exposures and observation requirements on the proposal forms are explained. Data reduction procedures are outlined.

Taff, Larry↗

Measurement of vortex flow fields

A 3-D laser fluorescence anemometer (LFA) was designed, built, and demonstrated for use in the Langley 16 x 24 inch Water Tunnel. Innovative optical design flexibility combined with compact and portable data acquisition and control systems were incorporated into the instrument. This will allow its use by NASA in other test facilities. A versatile fiber optic system facilities normal and off-axis laser beam alignment, removes mirror losses and improves laser safety. This added optical flexibility will also enable simple adaptation for use in the adjacent jet facility. New proprietary concepts in transmitting color separation, light collection, and novel prism separation of the scattered light was also designed and built into the system. Off-axis beam traverse and alignment complexity led to the requirement for a specialized, programmable transverse controller, and the inclusion of an additional traverse for the off-axis arm. To meet this challenge, an 'in-house' prototype unit was designed and built and traverse control software developed specifically for the water tunnel traverse applications. A specialized data acquisition interface was also required. This was designed and built for the LFA system.

Mcdevitt, T. Kevin↗

A cable detection lidar system for helicopters

Helicopters in low-level flight are endangered by power lines or telephone wires, especially when flying at night and under poor visibility conditions. In order to prevent 'wire strike', Thomson has developed a lidar system consisting of a pulsed diode laser emitting in the near infrared region (lambda = 0.9 microns). The HOWARD (Helicopter Obstacle Warning and Detection) System utilizes a high repetition rate diode laser (PRE = 20 KHz) along with counter-rotating prisms for laser beam deflection with a total field of view of 30 degrees. This system was successfully field tested in 1991. HOWARD can detect one inch wires at ranges up to 200 meters. We are presently in the process of developing a flyable compact lidar system capable of detection ranges in the order of 400 meters.

Grossmann, Benoist↗

Emission-line galaxies in the third list of the Case Low-Dispersion Northern Sky Survey

Observations of 47 galaxies in the third Case list are reported. Thirty-five of the galaxies in the sample were selected for the presence of emission lines on the objective prism plates. At the higher spectral dispersion of the data, significant line emission was found in 46 of the 47 galaxies. Twenty-six galaxies are found to be undergoing significant bursts of star formation. Ten additional galaxies may be starburst galaxies with low-excitation spectra. Two galaxies are probably type Seyfert 2. The most distant object, CG 200, at a redshift of 0.144, has a strong broad H-alpha emission line, and is probably a Seyfert 1. Seventeen of the galaxies have been detected by IRAS. Eight of the IRAS galaxies have H-II-region-type spectra and eight have low-ionization starburst spectra. The galaxies represent a mixture of types, ranging from intrinsically faint dwarf galaxies with Mb equalling -16 mag, to powerful galaxies with MB equalling -23 mag. Galaxies CG 234 and CG 235 are interacting, as are galaxies CG 269 and CG 270.

Weistrop, Donna↗

A Cassegrain echelle spectrograph

The 'LPL echelle' is a CCD spectrograph with a resolving power of 160,000 and enough sensitivity to detect the brighter airglow emissions in a few minutes. It uses an R3.2 grating in a novel out-of-plane mounting that permits any wavelength to be placed on the blaze. A single order is selected by a medium-band interference filter. Lower dispersions and broader wavelength coverage are obtained by replacing the echelle by a 600 line/mm grating or a Littrow prism.

Hunten, D. M.↗

Miniaturized optical correlator

A robust optical correlator that is a miniaturized version of the classic Vander-Lugt correlator is developed. The correlator consists of a simple diode laser for illumination and a CMOS photodetector to detect the correlation peak. A set of roof prisms is configured to fold the light path into a compact design. A holographic plate is used for storing the matched filter. This correlator is particularly applicable to docking autonomous vehicles near a predesignated landing mark. This miniature optical correlator is described in terms of its functional performance.

Scholl, M. S.↗

Growth of ice discs from the vapor and the mechanism of habit change of ice crystals

Ice crystals nucleated on a liquid nitrogen cooled glass fiber grow first as thin disks which subsequently transform to plates and columns as they thicken and extend to regions of higher supersaturation. Crystals are often found to be dislocation-free, which suggests that growth results from surface nucleation, the habit depending on preferential nucleation in an adsorbed multilayer on basal or prism face.

Keller, V. W.↗

Galileo Photopolarimeter/Radiometer experiment

The Photopolarimeter/Radiometer (PPR) is a remote sensing instrument on the Galileo Orbiter designed to measure the degree of linear polarization and the intensity of reflected sunlight in ten spectral channels between 410 and 945 nm to determine the physical properties of Jovian clouds and aerosols, and to characterize the texture and microstructure of satellite surfaces. The PPR also measures thermal radiation in five spectral bands between 15 and 100 microns to sense the upper tropospheric temperature structure. Two additional channels which measure spectrally integrated solar and solar plus thermal radiation are used to determine the planetary radiation budget components. The PPR photopolarimetric measurements utilize previously flown technology for high-precision polarimetry using a calcite Wollaston prism and two silicon photodiodes to enable simultaneous detection of the two orthogonal polarization components. The PPR radiometry measurements are made with a lithium tantalate pyroelectric detector utilizing a unique arrangement of radiometric stops and a scene/space chopper blade to enable a warm instrument to sense accurately the much colder scene temperatures.

Russell, E. E.↗

Generation of sub-100-fs pulses from a CW mode-locked chromium-doped forsterite laser

Generation of femtosecond pulses from a continuous-wave mode-locked chromium-doped forsterite laser is reported. The forsterite laser was actively mode locked by using an acoustooptic modulator operating at 78 MHz with two Brewster high-dispersion glass prisms for intracavity chirp compensation. Transform-limited sub-100-fs pulses were routinely generated in the TEM(00) mode with 85 mW of continuous power (with 1 percent output coupler), tunable over 1230-1280 nm. The shortest pulses measured had a 60-fs pulse width.

Seas, A.↗

Polarization-stabilized 1.15- and 3.39-micron He-Ne lasers

Two methods for polarization stabilization of an internal-mirror 3.39-micron He-Ne laser are reported. The first relies on a concurrently lasing 1.15-micron transition by fixing the relative amplitude of two orthogonally polarized longitudinal modes that are split by a Rochon prism and detected with separate Si photodiodes. In the second method, two spatially separated orthogonally polarized adjacent 3.39-micron modes are optically balanced, differentially chopped, and recombined on a single InSb photodiode for phase-sensitive detection. The dual-wavelength scheme has been tested by beating against a methane-stabilized 3.39-micron He-Ne laser, which yields maximum excursions of less than 0.5 MHz over several hours and comparable reproducibility. The polarization-stabilized He-Ne laser has been used as a reference for a tunable color-center laser molecular-beam optothermal spectrometer and provides a precision of better than 2 MHz.

Junttila, M.-L.↗

Compact Optical Correlator

Optical cross-correlator indicates position of target (if any) in scene matching target encoded in matched filter. Size reduced by use of prisms to fold optical path. Device designed, assembled from commercial components, and tested to verify feasibility of miniaturization for eventual incorporation into navigational and/or control systems of autonomous vehicles. For example, aircraft equipped with optical correlator recognizes prescribed target and measures its position, so that it lands on target under automatic control.

Scholl, Marija S.↗

Extraterrestrial applications of solar optics for interior illumination

Solar optics is a terrestrial technology that has potential extraterrestrial applications. Active solar optics (ASO) and passive solar optics (PSO) are two approaches to the transmission of sunlight to remote interior spaces. Active solar optics is most appropriate for task illumination, while PSO is most appropriate for general illumination. Research into solar optics, motivated by energy conservation, has produced lightweight and low-cost materials, products that have applications to NASA's Controlled Ecological Life Support System (CELSS) program and its lunar base studies. Specifically, prism light guides have great potential in these contexts. Several applications of solar optics to lunar base concepts are illustrated.

Eijadi, David A.↗