Search NASA⌕ Search

SEARCH · Search NASA

Results for “Performance analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Dual Fan Separator within the Universal Waste Management System

Since NASA's new spacecraft in development for both LEO and Deep Space capability have considerable crew volume reduction in comparison to the Space Shuttle, it is clear that NASA requires a smaller and less expensive commode. The UTAS Universal Waste Management System (UWMS) was designed to address these new constraints, resulting in an 80% volume reduction in the cabin while enhancing performance. Whereas all of the current space commodes use air flow to capture both urine and feces and separate air from the captured air/urine mixture, the UWMS commode and urine fans and the urine separator were combined into a single unit. This unit enables use of a single motor and motor controller, which provides considerable packaging and weight efficiency. In some of the intended platform applications for the UWMS, the urine is pumped to a water reclamation system. The ISS Urine Processor Assembly (UPA) system requires delivered urine to include less than 0.25% air inclusion. Air inclusion in centrifugal urine separators is greatly dependent on its rotational speed. To satisfy this requirement, a gear reducer was included, allowing the fans to rotate at a much higher speed than the separator. This new design, the Dual Fan Separator (DFS) has been designed, prototyped and tested. This paper will outline the studies and analysis performed to develop the design configuration for testing. The studies included a configuration trade study, dynamic stability analysis of the rotating bodies and a performance analysis of included labyrinth seals. NASA is considereing a program to fly the UWMS aboard the ISS as a flight experiment. The goal of the design activity is to elevate the Technical Readiness Level (TRL) of the Dual Fan Separator and determine if the concept is ready to be included in flight experiment deliverable.

Stapleton, Tom↗

Multi-rate OCDMA system BER performance evaluations for different ML-code sequences

This paper analyzes Bit Error Rate (BER) of Optical Code Division Multiple Access (OCDMA) networks for different class of services which are data, voice, and video; whereas Multi-Length Weighted Modified Prime Code (ML-WMPC) sequences are utilized as a spreading code in with respect to previously used ML-Optical Orthogonal codes. Due to variations in bit rates between the mentioned services, each of them assigns a different WMPC sequence length. In addition, the shot noise, thermal noise, and the Multiple Access Interference (MAI) are included and considered as sources of noise in the BER performance analysis. Furthermore, Pulse Position Modulation, Manchester encoding and MAI cancellation (MAIC) technique are utilized to improve the network performance at a higher number of active users. For analysis, the BER performance calculations are investigated for three types of OCDMA receivers such as simple receiver, receiver with MAIC technique, and receiver with MAIC and Manchester encoding. Moreover, the BER mathematical models have been introduced for different bit rates according to the type of service in the presence of the ML-WMPC and the last of three mentioned OCDMA receivers. Finally, these models and their results are compared with the other existing models, where the results show an improvement in BER performance in the proposed approach.

42 ENGINEERING↗

Tausch: A halo exchange library for large heterogeneous computing systems using MPI, OpenCL, and CUDA

Exchanging halo data is a common task in modern scientific computing applications and efficient handling of this operation is critical for the performance of the overall simulation. Tausch is a novel header-only library that provides a simple API for efficiently handling these types of data movements. Tausch supports both simple CPU-only systems, but also more complex heterogeneous systems with both CPUs and GPUs. It currently supports both OpenCL and CUDA for communicating with GPGPU devices, and allows for communication between GPGPUs and CPUs. The API allows for drop-in replacement in existing codes and can be used for the communication layer in new codes. This paper provides an overview of the approach taken in Tausch, and a performance analysis that demonstrates expected and achieved performance. Here, we highlight the ease of use and performance with three applications: First Tausch is compared to the halo exchange framework from two Mantevo applications, HPCCG and miniFE, and then it is used to replace a legacy halo exchange library in the flexible multigrid solver framework Cedar.

97 MATHEMATICS AND COMPUTING↗

EVIDENCE FOR NON-EVOLVING Fe II/Mg II RATIOS IN RAPIDLY ACCRETING z {approx} 6 QSOs

Quasars (QSOs) at the highest known redshift (z {approx} 6) are unique probes of the early growth of supermassive black holes (BHs). Until now, only the most luminous QSOs have been studied, often one object at a time. Here we present the most extensive consistent analysis to date of 4 < z < 6.5 QSOs with observed near-infrared spectra, combining three new z {approx} 6 objects from our ongoing Very Large Telescope-Infrared Spectrometer And Array Camera program with nineteen sources from the literature. The new sources extend the existing Sloan Digital Sky Survey (SDSS) sample toward the faint end of the QSO luminosity function. Using a maximum likelihood fitting routine optimized for our spectral decomposition, we estimate the BH mass (M{sub BH}), the Eddington ratio (defined as L{sub bol}/L{sub Edd}), and the Fe II/Mg II line ratio, a proxy for the chemical abundance, to characterize both the central object and the broad-line region gas. The QSOs in our sample host BHs with masses of {approx}10{sup 9} M{sub sun} that are accreting close to the Eddington luminosity, consistent with earlier results. We find that the distribution of observed Eddington ratios is significantly different than that of a luminosity-matched comparison sample of SDSS QSOs at lower redshift (0.35 < z < 2.25): the average (log (L{sub bol}/L{sub Edd})) = -0.37 (L{sub bol}/L{sub Edd} {approx} 0.43) with a scatter of 0.20 dex for the z > 4 sample and the (log (L{sub bol}/L{sub Edd})) = -0.80 (L{sub bol}/L{sub Edd} {approx} 0.16) with a scatter of 0.24 dex for the 0.35 < z < 2.25 sample. This implies that, at a given luminosity, the M{sub BH} at high-z is typically lower than the average M{sub BH} of the lower-redshift population, i.e., the z > 4 sources are accreting significantly faster than the lower-redshift ones. We show that the derived Fe II/Mg II ratios depend sensitively on the analysis performed: our self-consistent, homogeneous analysis significantly reduces the Fe II/Mg II scatter found in previous studies. The measured Fe II/Mg II line ratios show no sign of evolution with cosmic time in the redshift range 4 < z < 6.5. If the Fe II/Mg II line ratio is used as a secondary proxy of the Fe/Mg abundance ratio, this implies that the QSOs in our sample have undergone a major episode of Fe enrichment in the few 100 Myr preceding the cosmic age at which they are observed.

79 ASTRONOMY AND ASTROPHYSICS↗

Educating HPC Users in the use of advanced computing technology

We examine a multi-modal approach to educating and training users of an advanced computing technology testbed at the Institute for Advanced Computational Science at Stony Brook University. Ookami provides researchers worldwide with access to 176 Fujitsu A64FX compute nodes, this being the same processor technology powering the Japanese Fugaku supercomputer, the fastest computer in the world since June 2020. However, achieving high-performance on this Arm-based, leadership computing technology requires that users be familiar with details of computer architecture, performance analysis and modeling, and high-performance programming models that are commonly omitted in introductory programming courses. Indeed, regardless of their seniority, many of the testbed users are surprisingly unfamiliar with basic concepts such as vectorization, pipelining, latency/bandwidth, roofline models, computing energy/power, threads, and non-uniform memory access. These same concepts also pervade mainstream x86 technologies, so this is of widespread concern. Due to the national/global nature of our user community that is also very diverse in both discipline and experience, the inability to offer formal classes, and our experience that most people do not tend to read online documentation or training materials in sufficient depth, we have consciously employed multiple approaches that heavily emphasize (online) personal interactions and transfer of skills. Online documentation has been organized around best-practices and FAQs; twice-weekly hackathons and office hours via Zoom enable deep dives by both the team and the user community with multiple broad benefits; a Slack channel provides both real time and archived answers and discussions; and workshops, training and webinars target community needs as they arise. Furthermore, the perspective that these tools are being used in an educational setting rather than just for project communication makes them more effective and contributes to community success.

A64FX↗

Argonne Bubble Experiment Thermal Model Development III

This report describes the continuation of the work reported in “Argonne Bubble Experiment Thermal Model Development” and “Argonne Bubble Experiment Thermal Model Development II”. The experiment was performed at Argonne National Laboratory (ANL) in 2014. A rastered 35 MeV electron beam deposited power in a solution of uranyl sulfate, generating heat and radiolytic gas bubbles. Irradiations were performed at beam power levels between 6 and 15 kW. Solution temperatures were measured by thermocouples, and gas bubble behavior was recorded. The previous report2 described the Monte-Carlo N-Particle (MCNP) calculations and Computational Fluid Dynamics (CFD) analysis performed on the as-built solution vessel geometry. The CFD simulations in the current analysis were performed using Ansys Fluent, Ver. 17.2. The same power profiles determined from MCNP calculations in earlier work were used for the 12 and 15 kW simulations. The primary goal of the current work is to calculate the temperature profiles for the 12 and 15 kW cases using reasonable estimates for the gas generation rate, based on images of the bubbles recorded during the irradiations. Temperature profiles resulting from the CFD calculations are compared to experimental measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermal analysis research applicable to space station technology needs

Thermal analysis, optimization, and software research and development at the NASA Langley Research Center which is applicable to analytical design calculations for space station structures are summarized. Topics discussed include integrated thermal-structural software, improved thermal radiation analysis, solution techniques for transient temperatures, unified thermal-structural finite elements, thermal structural sensitivity analysis and optimization, and concept and performance analysis for heat pipes.

Adelman, H. M.↗

Analysis of rotationally symmetric arrays of apertures on conducting spherical surfaces

Rotationally symmetric arrays of circular waveguide fed apertures on conducting spherical surfaces have been analyzed. Representation of the outside electromagnetic fields in terms of spherical transmission line modes permit the array analysis to be viewed as a spherical waveguide junction discontinuity problem. The apertures, in general, carry dual polarized circular waveguide TE11 modes. Two independent formulations - the unit cell method and the eigenexcitation method that take rotational symmetry into account - are developed and are checked against each other numerically for computational accuracy. These two formulations are analytically linked as discrete Fourier series pairs. It is seen that mutual coupling along the array decays more rapidly when the polarization of excitation is perpendicular to the array plane than when it is parallel to it. This analysis has been applied in the performance analysis of the Dome Lens phased array radar antenna.

Bondyopadhyay, Probir K.↗

Measurement of taskload in the analysis of aircrew performance

The objective of the study was to perform a quantitative analysis of a high workload portion of a full mission flight simulation in order to test the hypothesis that taskload area is a valid, objective measure of workload management. This methodology provides a tool for the researcher attempting to quantify the management of workload in a complex environment. The researcher can then produce a reliable quantitative evaluation of behavior related to workload management.

Laudeman, Irene V.↗

Automated Identification of Nucleotide Sequences

STITCH is a computer program that processes raw nucleotide-sequence data to automatically remove unwanted vector information, perform reverse-complement comparison, stitch shorter sequences together to make longer ones to which the shorter ones presumably belong, and search against the user s choice of private and Internet-accessible public 16S rRNA databases. ["16S rRNA" denotes a ribosomal ribonucleic acid (rRNA) sequence that is common to all organisms.] In STITCH, a template 16S rRNA sequence is used to position forward and reverse reads. STITCH then automatically searches known 16S rRNA sequences in the user s chosen database(s) to find the sequence most similar to (the sequence that lies at the smallest edit distance from) each spliced sequence. The result of processing by STITCH is the identification of the most similar well-described bacterium. Whereas previously commercially available software for analyzing genetic sequences operates on one sequence at a time, STITCH can manipulate multiple sequences simultaneously to perform the aforementioned operations. A typical analysis of several dozen sequences (length of the order of 103 base pairs) by use of STITCH is completed in a few minutes, whereas such an analysis performed by use of prior software takes hours or days.

Osman, Shariff↗

Simple Benchmark Specifications for Space Radiation Protection

This report defines space radiation benchmark specifications. This specification starts with simple, monoenergetic, mono-directional particles on slabs and progresses to human models in spacecraft. This report specifies the models and sources needed to what the team performing the benchmark needs to produce in a report. Also included are brief descriptions of how OLTARIS, the NASA Langley website for space radiation analysis, performs its analysis.

Singleterry, Robert C. Jr.↗

PIPER: Performance Insights for Programmers and Exascale Runtimes

During the lifetime of the project, the PIPER at the University of Utah worked in collaboration with the team from the partner institutions to establish a set of software tools for analyzing and improving the performance parallel computing tools. These activities complement and complete the work performed by the other X-Stack 2 projects with the definition of a common data models and computing infrastructures, which have been a central element in the targeted performance analysis pipeline and new programming models. The University of Utah team have focused mainly on developing data analysis and visualization systems to facilitate exploration, comparison and evaluation of the behavior and performance of complex algorithms in modern HPC infrastructures. This is involved several demonstrations of the performance achieved and presentation of the results in a way that facilitates the users understand bottlenecks and ways to overcome them. One major focus of the University of Utah activities has been the analysis of the performance characteristics of Fat-Tree and Dragonfly topology networks. The work involved the development of practical visualization systems especially in collaboration with the team at LLNL, and published several papers and gave invited talks at prestigious venues such as the Salishan Conference on High-Speed Computing or the International Conference on High Performance Computing, Data, and Analytics. In addition, the university of Utah team has advanced the core activities on analyzing the performance characteristics of I/O and other data movement systems and their practical use for scaling Uintah and other simulation codes poised for use in the exascale computing environments of the future.

42 ENGINEERING↗

Implementation of a Practical Teaching Course on Protein Engineering

Protein Engineering is a highly evolved field of engineering aimed at developing proteins for specific industrial, medical, and research applications. Here, we present a practical teaching course to demonstrate fundamental techniques used to express, purify and analyze a recombinant protein produced in Escherichia coli—the enhanced green fluorescent protein (eGFP). The methodologies used for eGFP production were introduced sequentially over six laboratory sessions and included (i) bacterial growth, (ii) sonication (for cell lysis), (iii) affinity chromatography and dialysis (for eGFP purification), (iv) bicinchoninic acid (BCA) and fluorometry assays for total protein and eGFP quantification, respectively, and (v) sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) for qualitative analysis. All groups were able to isolate the eGFP from the cell lysate with purity levels up to 72%. Additionally, a mass balance analysis performed by the students showed that eGFP yields up to 46% were achieved at the end of the purification process following the adopted procedures. A sensitivity analysis was performed to pinpoint the most critical steps of the downstream processing.

Gomes, Luciana (ORCID:0000000289921097)↗

Developing a Comprehensive Software Suite for Advanced Reactor Performance and Safety Analysis

This paper provides an introduction to the reactor analysis capabilities of the nuclear power reactor simulation tools that are being developed as part of the U.S. Department of Energy s Nuclear Energy Advanced Modeling and Simulation (NEAMS) Toolkit. The NEAMS Toolkit is an integrated suite of multi-physics simulation tools that leverage high-performance computing to reduce uncertainty in the prediction of performance and safety of advanced reactor and fuel designs. The Toolkit effort is comprised of two major components, the Fuels Product Line (FPL), which provides tools for fuel performance analysis, and the Reactor Product Line (RPL), which provides tools for reactor performance and safety analysis. This paper provides an overview of the NEAMS RPL development effort.

Multi-physics↗

Orbiter Trajectory Analysis for a Two-Stage Reusable Launch Vehicle

Trajectory analysis performed on NASA's reference two-stage-to-orbit launch vehicle upper stage will be presented. The work was completed in support of the Hypersonics Multidisciplinary Analysis and Optimization effort for the NASA-Air Force Joint System Study. Three degree-of-freedom (3-DOF) untrimmed trajectory analysis was performed for the orbiter ascent, closure and re-entry. An iterative closure process resulted in a 333,000 lb initial mass for the orbiter. The re-entry trajectory satisfied heating constraints for all payload out cases and met the constraints with reduced margins for payload in cases. Abort trajectories for engine out at staging, engine out during ascent, and failure to circularize in orbit, gave insight to the robustness of the orbiter. A trimmed ascent trajectory defined an engine gimbal location and the body flap angle best suited for maximizing injected mass. A trimmed re-entry trajectory revealed a need to update the trim routine to accommodate full flap aerodynamic data.

Cowling, Adam L.↗

Minimum critical masses of heterogeneous moderated plutonium and uranium metal systems and their practical application to operation limits - 14355

In criticality safety analysis it is important to recognize the significant differences in reactivity achieved when material transitions from the solid to solution regime. However, the intermediate area of mixed heterogeneous systems (i.e. collections of small pieces) has not been well characterized. To that end, a study has been completed to determine the effect of fissile material piece size/shape on minimum critical mass of a system. The study presented represents a calculation-based investigation of moderated arrays of fissionable material to expand on established plutonium and uranium solution curves of LA-10860 to add the heterogeneous regime between pure a solid and solution of fissionable material. The analysis performed consists of parametric studies utilizing the neutron transport code MCNP6 to calculate the critical mass of systems composed of moderated arrays of varying sizes of spheres, cubes, or elongated rods (height >> diameter). The boundary of the array is increased to find the critical mass for the particular piece geometry and fissile volume density. The different shapes were then compared at points with the same fissile volume density to demonstrate that the key relationship between varying piece shape is the surface area to volume ratio. The results show that as pieces get larger (i.e. more heterogeneous) the minimum critical mass starts to increase. This effect results from the moderation of neutrons becoming less and less effective due to increased self-shielding of larger individual pieces. For plutonium pieces at a surface area to volume ratio of < 13 the reactivity increase from additional neutron moderation can no longer overcome the reactivity decrease from the reduced core density (separation of material pieces). At this point the minimum critical mass is achieved when the plutonium is in a solid metal configuration. This effect is not noticed for uranium which responds much more quickly to moderation and thus almost any sized pieces will increase in reactivity when moderation is introduced. Summarizing the results of the calculation a surface area to volume ratio vs minimum critical mass curve is generated. The curve gives analysts a practical starting minimum critical mass in analysis of heterogeneous systems with known minimum material surface area to volume ratios. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗