Search NASA⌕ Search

SEARCH · Search NASA

Results for “Phased Array”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Heterojunction metal-oxide-metal Au-Fe{sub 3}O{sub 4}-Au single nanowire device for spintronics

In this report, we present the synthesis of heterojunction magnetite nanowires in alumina template and describe magnetic and electrical properties from a single nanowire device for spintronics applications. Heterojunction Au-Fe-Au nanowire arrays were electrodeposited in porous aluminum oxide templates, and an extensive and controlled heat treatment process converted Fe segment to nanocrystalline cubic magnetite phase with well-defined Au-Fe{sub 3}O{sub 4} interfaces as confirmed by the transmission electron microscopy. Magnetic measurements revealed Verwey transition shoulder around 120 K and a room temperature coercive field of 90 Oe. Current–voltage (I-V) characteristics of a single Au-Fe{sub 3}O{sub 4}-Au nanowire have exhibited Ohmic behavior. Anomalous positive magnetoresistance of about 0.5% is observed on a single nanowire, which is attributed to the high spin polarization in nanowire device with pure Fe{sub 3}O{sub 4} phase and nanocontact barrier. This work demonstrates the ability to preserve the pristine Fe{sub 3}O{sub 4} and well defined electrode contact metal (Au)–magnetite interface, which helps in attaining high spin polarized current.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Large-scale Plume in an X-class Solar Flare

Ever-increasing multi-frequency imaging of solar observations suggests that solar flares often involve more than one magnetic fluxtube. Some of the fluxtubes are closed, while others can contain open fields. The relative proportion of nonthermal electrons among those distinct loops is highly important for understanding energy release, particle acceleration, and transport. The access of nonthermal electrons to the open field is also important because the open field facilitates the solar energetic particle (SEP) escape from the flaring site, and thus controls the SEP fluxes in the solar system, both directly and as seed particles for further acceleration. The large-scale fluxtubes are often filled with a tenuous plasma, which is difficult to detect in either EUV or X-ray wavelengths; however, they can dominate at low radio frequencies, where a modest component of nonthermal electrons can render the source optically thick and, thus, bright enough to be observed. Here we report the detection of a large-scale “plume” at the impulsive phase of an X-class solar flare, SOL2001-08-25T16:23, using multi-frequency radio data from Owens Valley Solar Array. To quantify the flare’s spatial structure, we employ 3D modeling utilizing force-free-field extrapolations from the line of sight SOHO /MDI magnetograms with our modeling tool GX-Simulator. We found that a significant fraction of the nonthermal electrons that accelerated at the flare site low in the corona escapes to the plume, which contains both closed and open fields. We propose that the proportion between the closed and open fields at the plume is what determines the SEP population escaping into interplanetary space.

79 ASTRONOMY AND ASTROPHYSICS↗

Adaptive matching of the iota ring linear optics for space charge compensation

Many present and future accelerators must operate with high intensity beams when distortions induced by space charge forces are among major limiting factors. Betatron tune depression of above approximately 0.1 per cell leads to significant distortions of linear optics. Many aspects of machine operation depend on proper relations between lattice functions and phase advances, and can be i proved with proper treatment of space charge effects. We implement an adaptive algorithm for linear lattice re matching with full account of space charge in the linear approximation for the case of Fermilab’s IOTA ring. The method is based on a search for initial second moments that give closed solution and, at the same predefined set of goals for emittances, beta functions, dispersions and phase advances at and between points of interest. Iterative singular value decomposition based technique is used to search for optimum by varying wide array of model parameters

43 PARTICLE ACCELERATORS↗

SPITZER OBSERVATIONS OF SHOCK-EXCITED HYDROGEN DEUTERIDE IN IC 443C, HH 7, AND HH 54: PROBING THE GAS-PHASE DEUTERIUM ABUNDANCE IN THE DENSE INTERSTELLAR MEDIUM

We present and analyze observations-carried out using the Infrared Spectrograph (IRS) on the Spitzer Space Telescope-of the R(3) and R(4) pure rotational lines of hydrogen deuteride (HD) detected from shock-heated material associated with the supernova remnant IC 443C and with the Herbig-Haro objects HH 7 and HH 54. Assuming a continuous temperature distribution for gas observed along the sight lines, we have constrained the gas density to be in the {approx}10{sup 3}-10{sup 4} cm{sup -3} range, using both spectroscopic data for H{sub 2}, HD, and CO from IRS and from the Infrared Space Observatory (ISO), as well as photometric data from Spitzer's Infrared Array Camera. The derived HD abundance relative to H{sub 2} is quite sensitive to the assumed excitation conditions in the emitting gas. Assuming that HD accounts for all gas-phase deuterium in the emitting material, and using all the available spectroscopic data to constrain the excitation conditions, we obtained gas-phase deuterium abundances [D/H]{sub gas} of 0.95{sup +0.54}{sub -0.27} Multiplication-Sign 10{sup -5} and 0.87{sup +0.31}{sub -0.27} Multiplication-Sign 10{sup -5} (statistical errors only) for IC 443C and HH 54, respectively. The uncertainties in the HD abundance are dominated by systematic effects related to the poorly known excitation conditions, and more accurate estimates of the HD abundance in shocked molecular clouds will require measurements of the emission in additional HD rotational transitions.

79 ASTRONOMY AND ASTROPHYSICS↗

PAH/PAH(CF 3 ) n Donor/Acceptor Charge‐Transfer Complexes in Solution and in Solid‐State Co‐Crystals

Abstract A solution, solid‐state, and computational study is reported of polycyclic aromatic hydrocarbon PAH/PAH(CF 3 ) n donor/acceptor (D/A) charge‐transfer complexes that involve six PAH(CF 3 ) n acceptors with known gas‐phase electron affinities that range from 2.11(2) to 2.805(15) eV and four PAH donors, including seven CT co‐crystal X‐ray structures that exhibit hexagonal arrays of mixed π‐stacks with 1/1, 1/2, or 2/1 D/A stoichiometries (PAH=anthracene, azulene, coronene, perylene, pyrene, triphenylene; n= 5, 6). These are the first D/A CT complexes with PAH(CF 3 ) n acceptors to be studied in detail. The nine D/A combinations were chosen to allow several structural and electronic comparisons to be made, providing new insights about controlling D/A interactions and the structures of CT co‐crystals. The comparisons include, among others, CT complexes of the same PAH(CF 3 ) n acceptor with four PAH donors and CT complexes of the same donor with four PAH(CF 3 ) n acceptors. All nine CT complexes exhibit charge‐transfer bands in solution with λ max between 467 and 600 nm. A plot of E ( λ max ) versus [ IE (donor)− EA (acceptor)] for the nine CT complexes studied is linear with a slope of 0.72±0.03 eV eV −1 . This plot is the first of its kind for CT complexes with structurally related donors and acceptors for which precise experimental gas‐phase IE s and EA s are known. It demonstrates that conclusions based on the common assumption that the slope of a CT E ( λ max ) versus [ IE − EA ] plot is unity may be incorrect in at least some cases and should be reconsidered.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fabrication of Highly Ordered and Well-Aligned PbTiO 3 /TiN Core–Shell Nanotube Arrays

Highly ordered and well-aligned PbTiO 3 /TiN core–shell nanotubes are fabricated in this paper via an anodic aluminum oxide templating route followed by TiN and TiO 2 atomic layer deposition deposition and a subsequent PbO vapor reaction. Finally, PbTiO 3 /TiN nanotubes keep their original shape after the vapor phase reaction, and they display well-defined piezoresponse hysteresis curves with remnant piezoresponse of 38 pm V -1 .

36 MATERIALS SCIENCE↗

One-dimensional heterocyclic carbene–Au metal–organic frameworks bridging ultra-high vacuum models and scalable liquid-phase growth

The controlled design of molecule–metal interfaces is central to the development of functional nanomaterials for catalysis, sensing, and molecular electronics. Here we show that the adsorption of a Janus-type diimidazolium precursor on gold yields one-dimensional (1D) N-heterocyclic carbene (NHC)–Au–NHC metal organic frameworks (MOFs) featuring positively charged gold nodes. Using synchrotron X-ray photoemission spectroscopy (XPS), near edge X-ray adsorption fine structure (NEXAFS) spectroscopy and scanning tunnelling microscopy (STM), we demonstrate that thermal activation promotes counterion removal and drives the formation of extended 1D arrays, characterized by ∼1.0 nm Au–Au spacing and adatom densities up to 0.6 atom nm −2 (∼4% of surface atoms). Importantly, we translate this ultra-high vacuum (UHV) benchmark into a scalable solution-phase protocol in ethanol, enabling 1D-MOF growth under mild, base-free, open-air conditions. The resulting films retain structural and electronic signatures of UHV-grown systems, bridging model studies and practical synthesis. This approach establishes NHC–metal frameworks as accessible, tunable platforms for catalysis and materials design.

Gold adatoms↗

The triple decomposition of a fluctuating velocity field in a multiscale flow

A new method for the triple decomposition of a multiscale flow, which is based on the novel optimal mode decomposition (OMD) technique, is presented. OMD provides low order linear dynamics, which fits a given data set in an optimal way and is used to distinguish between a coherent (periodic) part of a flow and a stochastic fluctuation. The method needs no external phase indication since this information, separate for coherent structures associated with each length scale introduced into the flow, appears as the output. The proposed technique is compared against two traditional methods of the triple decomposition, i.e., bin averaging and proper orthogonal decomposition. This is done with particle image velocimetry data documenting the near wake of a multiscale bar array. It is shown that both traditional methods are unable to provide a reliable estimation for the coherent fluctuation while the proposed technique performs very well. The crucial result is that the coherence peaks are not observed within the spectral properties of the stochastic fluctuation derived with the proposed method; however, these properties remain unaltered at the residual frequencies. This proves the method’s capability of making a distinction between both types of fluctuations. The sensitivity to some prescribed parameters is checked revealing the technique’s robustness. Additionally, an example of the method application for analysis of a multiscale flow is given, i.e., the phase conditioned transverse integral length is investigated in the near wake region of the multiscale object array.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Polymer Stabilized Paraboloid Liquid Crystal Microlenses with Integrated Pancharatnam–Berry Phase

Aspheric lenses reduce aberration and provide sharper images with improved spot size compared to spherical lenses. Here this paper demonstrates that applying shear flow can produce plano-concave liquid crystal (LC) lens arrays with paraboloid aspheric profiles. The focal length of individual lenses, with a 0.2 mm aperture, decreases from 0.67 to 0.45 mm as the chiral dopant increases from 0 to 6 wt%. The focal length is also sensitive to the polarization state of the incoming light. The lenses are stabilized by photopolymerizing with 6 wt% of reactive monomer added to the LC. A qualitative explanation for the flow-induced lens formation and the optical properties of the lenses is provided. The potential tunability of the lenses in various fields and their use as paraboloid reflectors are discussed.

36 MATERIALS SCIENCE↗

THE 8 {mu}m PHASE VARIATION OF THE HOT SATURN HD 149026b

We monitor the star HD 149026 and its Saturn-mass planet at 8.0 {mu}m over slightly more than half an orbit using the Infrared Array Camera on the Spitzer Space Telescope. We find an increase of 0.0227% +- 0.0066% (3.4sigma significance) in the combined planet-star flux during this interval. The minimum flux from the planet is 45% +- 19% of the maximum planet flux, corresponding to a difference in brightness temperature of 480 +- 140 K between the two hemispheres. We derive a new secondary eclipse depth of 0.0411% +- 0.0076% in this band, corresponding to a dayside brightness temperature of 1440 +- 150 K. Our new secondary eclipse depth is half that of a previous measurement (3.0sigma difference) in this same bandpass by Harrrington et al. We re-fit the Harrrington et al. data and obtain a comparably good fit with a smaller eclipse depth that is consistent with our new value. In contrast to earlier claims, our new eclipse depth suggests that this planet's dayside emission spectrum is relatively cool, with an 8 {mu}m brightness temperature that is less than the maximum planet-wide equilibrium temperature. We measure the interval between the transit and secondary eclipse and find that that the secondary eclipse occurs 20.9{sup +7.2}{sub -6.5} minutes earlier (2.9sigma) than predicted for a circular orbit, a marginally significant result. This corresponds to ecos(omega) = -0.0079{sup +0.0027}{sub -0.0025}, where e is the planet's orbital eccentricity and omega is the argument of pericenter.

79 ASTRONOMY AND ASTROPHYSICS↗

GeoChip-based analysis of functional microbial communities in a bioreduced uranium-contaminated aquifer during reoxidation by oxygen

A pilot-scale system was established for in situ biostimulation of U(VI) reduction by ethanol addition at the US Department of Energy's (DOE's) Field Research Center (Oak Ridge, TN). After achieving U(VI) reduction, stability of the bioreduced U(IV) was evaluated under conditions of (i) resting (no ethanol injection), (ii) reoxidation by introducing dissolved oxygen (DO), and (iii) reinjection of ethanol. GeoChip, a functional gene array with probes for N, S and C cycling, metal resistance and contaminant degradation genes, was used for monitoring groundwater microbial communities. High diversity of all major functional groups was observed during all experimental phases. The microbial community was extremely responsive to ethanol, showing a substantial change in community structure with increased gene number and diversity after ethanol injections resumed. While gene numbers showed considerable variations, the relative abundance (i.e. percentage of each gene category) of most gene groups changed little. During the reoxidation period, U(VI) increased, suggesting reoxidation of reduced U(IV). However, when introduction of DO was stopped, U(VI) reduction resumed and returned to pre-reoxidation levels. These findings suggest that the community in this system can be stimulated and that the ability to reduce U(VI) can be maintained by the addition of electron donors. This biostimulation approach may potentially offer an effective means for the bioremediation of U(VI)-contaminated sites.

54 ENVIRONMENTAL SCIENCES↗

Predicting critical heat flux using localized sensing at invisible vapor-liquid interfaces

Predicting critical heat flux (CHF) in two-phase electronics cooling systems remains a significant challenge due to the sudden onset of boiling crisis and the difficulty in directly visualizing vapor-liquid interfaces. Existing sensing methods rely on lagging temperature measurements, optically accessible systems, or spatially averaged signals that cannot pinpoint CHF initiation at localized high-heat-flux regions. Here, we report a planar capacitive sensing approach that enables real-time, localized detection of vapor-liquid interface dynamics for CHF prediction in boiling heat transfer. The capacitive sensor exploits the dielectric constant difference between liquid and vapor phases to capture bubble nucleation, growth, and departure dynamics with a temporal resolution down to 2 ms. The capacitive sensing reveals distinct signals across boiling regimes: from high-frequency fluctuations during strong nucleate boiling to low-frequency fluctuations with increased amplitudes when approaching CHF. The multi-sensor array experiments demonstrate real-time localized sensing, where each sensor responds exclusively to boiling in its immediate vicinity without crosstalk from neighboring regions. This non-intrusive sensing approach provides predictive rather than lagging sensing signals of CHF occurrence, offering predictive diagnosis of two-phase liquid cooling for the thermal management of high-power-density electronics.

CHF↗

Spitzer/MIPS 24 {mu}m OBSERVATIONS OF HD 209458b: THREE ECLIPSES, TWO AND A HALF TRANSITS, AND A PHASE CURVE CORRUPTED BY INSTRUMENTAL SENSITIVITY VARIATIONS

We report the results of an analysis of all Spitzer/MIPS 24 {mu}m observations of HD 209458b, one of the touchstone objects in the study of irradiated giant planet atmospheres. Altogether, we analyze two and a half transits, three eclipses, and a 58 hr near-continuous observation designed to detect the planet's thermal phase curve. The results of our analysis are: (1) a mean transit depth of 1.484% {+-} 0.033%, consistent with previous measurements and showing no evidence of variability in transit depth at the 3% level. (2) A mean eclipse depth of 0.338% {+-} 0.026%, somewhat higher than that previously reported for this system; this new value brings observations into better agreement with models. From this eclipse depth we estimate an average dayside brightness temperature of 1320 {+-} 80 K; the dayside flux shows no evidence of variability at the 12% level. (3) Eclipses in the system occur 32 {+-} 129 s earlier than would be expected from a circular orbit, which constrains the orbital quantity ecos {omega} to be 0.00004 {+-} 0.00033. This result is fully consistent with a circular orbit and sets an upper limit of 140 m s{sup -1} (3{sigma}) on any eccentricity-induced velocity offset during transit. The phase curve observations (including one of the transits) exhibit an anomalous trend similar to the detector ramp seen in previous Spitzer/IRAC observations; by modeling this ramp we recover the system parameters for this transit. The long-duration photometry which follows the ramp and transit exhibits a gradual {approx}0.2% decrease in flux over {approx}30 hr. This effect is similar to that seen in pre-launch calibration data taken with the 24 {mu}m array and is better fit by an instrumental model than a model invoking planetary emission. The large uncertainties associated with this poorly understood, likely instrumental effect prevent us from usefully constraining the planet's thermal phase curve. Our observations highlight the need for a thorough understanding of detector-related instrumental effects on long timescales when making the high-precision mid-infrared measurements planned for future missions such as EChO, SPICA, and the James Webb Space Telescope.

79 ASTRONOMY AND ASTROPHYSICS↗

Hyperspectral X-ray Imaging with TES Detectors for Nanoscale Chemical Speciation Mapping

We are developing an imaging capability (“Hyperspectral X-ray Imaging”) for mapping chemical information (molecular formula, phase, oxidation state, hydration) that is based on ultra-high-resolution X-ray emission spectroscopy with large transition-edge sensor microcalorimeter arrays in the scanning electron microscope. By combining microcalorimeter arrays with hundreds of pixels, high-bandwidth microwave frequency-division multiplexing, and fast digital electronics for near real-time data processing, our goal is to enable measurements using laboratory-scale instrumentation rather than synchrotron beamlines. Our application focus here is on mapping the chemical form of uranium compounds on the nanoscale. Furthermore, we will present our approach to developing the Hyperspectral X-ray Imaging capability, progress toward a 128-pixel microwave multiplexed X-ray fluorescence instrument at LANL, and the path to high-throughput nanoscale chemical mapping.

47 OTHER INSTRUMENTATION↗

Enhancing nanoscale charged colloid crystallization near a metastable liquid binodal

Achieving predictive control over crystallization using non-classical nucleation while avoiding kinetic traps would be a step towards designing materials with new functionalities. We address these challenges by inducing the bottom-up assembly of nanocrystals into ordered arrays, or superlattices. Using electrostatics—rather than density—to tune the interactions between particles, we watch self-assembly proceed through a metastable liquid phase. Here, we systematically investigate the phase behaviour as a function of quench conditions in situ and in real time using small-angle X-ray scattering. By fitting to colloid, liquid and superlattice models, we extract the time evolution of each phase and the system phase diagram, which we find to be consistent with short-range attractive interactions. Using the predictive power of the phase diagram, we establish control of the self-assembly rate over three orders of magnitude, and we identify one- and two-step self-assembly regimes, with only the latter implicating the metastable liquid as an intermediate. The presence of the metastable liquid increases the superlattice formation rate relative to the equivalent one-step pathway, and the superlattice order increases with the rate, revealing a generalizable kinetic strategy for promoting and enhancing ordered assembly.

Tanner, Christian P. N. [University of California,↗

Graphene based plasmonic terahertz amplitude modulator operating above 100 MHz

The terahertz (THz) region of the electromagnetic spectrum holds great potential in many fields of study, from spectroscopy to biomedical imaging, remote gas sensing, and high speed communication. To fully exploit this potential, fast optoelectronic devices such as amplitude and phase modulators must be developed. In this work, we present a room temperature external THz amplitude modulator based on plasmonic bow-tie antenna arrays with graphene. By applying a modulating bias to a back gate electrode, the conductivity of graphene is changed, which modifies the reflection characteristics of the incoming THz radiation. The broadband response of the device was characterized by using THz time-domain spectroscopy, and the modulation characteristics such as the modulation depth and cut-off frequency were investigated with a 2.0 THz single frequency emission quantum cascade laser. An optical modulation cut-off frequency of 105 ± 15 MHz is reported. The results agree well with a lumped element circuit model developed to describe the device.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Diagnosing low-mode (ℓ < 6) and mid-mode (6 ≤ ℓ ≤ 60) asymmetries in the post-stagnation phase of laser-direct-drive deuterium–tritium cryogenic implosions on OMEGA

Low- and mid-mode perturbations are possible candidates for performance limitations in cryogenic direct-drive implosions on the OMEGA laser at the Laboratory of Laser Energetics. Simulations with a 3D hydrocode demonstrated that hotspot imagers do not show evidence of the shell breakup in the dense fuel. However, these same simulations revealed that the low- and mid-mode perturbations in the dense fuel could be diagnosed more easily in the post-stagnation phase of the implosion by analyzing the peak in the x-ray emission limb at the coronal–fuel interface than before or at the stagnation phase. In experiments, the asymmetries are inferred from gated images of the x-ray emission of the implosion by using a 16-pinhole array imager filtered to record x-ray energies >800 eV and an x-ray framing camera with 40-ps time integration and 20-μm spatial resolution. Furthermore, a modal analysis is applied to the spatial distribution of the x-ray emission from deuterium and tritium cryogenic implosions on OMEGA recorded after the bang time to diagnose the low- and mid-mode asymmetries, and to study the effect that the beam-to-target ratio (Rb/Rt) has on the shell integrity.

47 OTHER INSTRUMENTATION↗

Shallow three-dimensional structure of the San Jacinto fault zone revealed from ambient noise imaging with a dense seismic array

In this work, we use 1 month of continuous seismic waveforms from a very dense seismic network to image with unprecedented resolution the shallow damage structure of the San Jacinto fault zone across the Clark fault strand. After calculating noise correlations, high apparent velocity arrivals coming from below the array are removed using a frequency–wavenumber filter. This is followed by a double-beamforming analysis on multiple pairs of subarrays to extract phase and group velocity information across the study area. The phase and group velocity dispersion curves are regionalized into phase and group velocity maps at different frequencies, and these maps are inverted using a neighbourhood algorithm to build a 3-D shear wave velocity model around the Clark fault down to ~500 m depth. The model reveals strong lateral variations across the fault strike with pronounced low-velocity zones corresponding to a local sedimentary basin and a fault zone trapping structure. The results complement previous earthquake- and seismic noise-based imaging of the fault zone at greater depth and clarify properties of structural features near the surface.

58 GEOSCIENCES↗