Search NASA⌕ Search

SEARCH · Search NASA

Results for “Pointing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Torsional magnetic reconnection at three dimensional null points: A phenomenological study

Magnetic reconnection around three dimensional (3D) magnetic null points is the natural progression from X-point reconnection in two dimensions. In 3D the separator field lines of the X-point are replaced with the spine line and fan plane (the field lines which asymptotically approach or recede from the null). In this work analytical models are developed for the newly classified torsional spine and torsional fan reconnection regimes by solving the steady state, kinematic, resistive magnetohydrodynamic equations. Reconnection is localized to around the null through the use of a localized field perturbation leading to a localized current while a constant resistivity is assumed. For the torsional spine case current is found to localize around the spine leading to a spiraling slippage of the field around the spine and out along the fan. For the torsional fan case current is found to be localized to the fan plane leading again to a spiraling slippage of the field. In each case no flux is transported across either the spine or the fan. An intermediate twist is then introduced and a link is established between the two regimes. We find that for a general twist plasma flows associated with both torsional spine and fan appear in distinct regions. As such we suggest that the ''pure'' flows of each are extreme cases.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Point vortices in two dimensional-plasma hydrodynamics

An exact theory of point vortices in two dimensional (2D) electron-ion plasma hydrodynamics is presented. This theory is a logical generalization of the classical theory of point vortices in a 2D Euler equation. The existence of two types of point vortices is shown: ion and electron, and their structure is described in detail. Ion vortices interact over long distances, while electron vortices interact over short distances. A dynamic system is obtained, which describes the common motion of an arbitrary number of electron and ion vortices. The proposed theory can be used to construct finite dimensional dynamical models of plasma motion, as well as for the construction of finite dimensional statistical models of turbulence, transport processes and filaments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the Pointing Angle of Electron Beams from Laser Wakefield Accelerators

Laser wakefield accelerators offer electron beams which could be useful for many applications. However, the problem of stabilizing the electron beam parameters has not been resolved yet. Here, we propose a method to minimize the electron beam pointing and report the generation of a relativistic electron beam with a stabilized pointing angle of 2 mrad (rms). This was achieved by using asymmetric non-relativistic laser pulses interacting with low-density helium gas jet. In such a weakly-nonlinear regime, symmetric laser pulses were neither able to generate reproducible nor stable electron beams. Thus, we propose asymmetric laser pulses for generating electron beams having stable and small pointing angles from laser-plasma accelerators.

43 PARTICLE ACCELERATORS↗

QCD Critical End Point: How it started, How it grew, and Where it goes

The presence of a critical end point in the QCD phase diagram can deform the trajectories describing the evolution of the expanding fireball in the {mu}{sub B}-T phase diagram. If the average emission time of hadrons is a function of transverse velocity, as microscopic simulations of the hadronic freezeout dynamics suggest, the deformation of the hydrodynamic trajectories will change the transverse velocity ({beta}{sub T}) dependence of the antiproton-to-proton ratio when the fireball passes in the vicinity of the critical end point. An unusual {beta}{sub T}-dependence of the p-bar/p ratio in a narrow beam energy window would thus signal the presence of the critical end point.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Dielectric Function Spectra and Critical-Point Energies of Cu2ZnSnSe4 from 0.5 to 9.0 eV

We present dielectric function {var_epsilon} = {var_epsilon}{sub 1} + i{var_epsilon}{sub 2} spectra and critical-point energies of Cu{sub 2}ZnSnSe{sub 4} determined by spectroscopic ellipsometry from 0.5 to 9.0 eV. We reduce artifacts from surface overlayers to the maximum extent possible by performing chemical-mechanical polishing and wet-chemical etching of the surface of a Cu{sub 2}ZnSnSe{sub 4} thin film. Ellipsometric data are analyzed by the multilayer model and the {var_epsilon} spectra are extracted. The data exhibit numerous spectral features associated with critical points, whose energies are obtained by fitting standard lineshapes to second energy derivatives of the data. The experimental results are in good agreement with the {var_epsilon} spectra calculated within the GW quasi-particle approximation, and possible origins of the pronounced critical-point structures are identified.

14 SOLAR ENERGY↗

QCD critical point sweep during black hole formation

We discuss the possibility to probe the QCD critical point during the prompt black hole formation. In black hole formation processes, temperature and baryon chemical potential become as high as T{approx} 90MeV and {mu}{sub B}{approx} 1300MeV. This high baryon chemical potential would allow nuclear matter to experience the QCD phase transition, and the temperature may be higher than the QCD critical point temperature. We compare the phase boundary in chiral effective models and the thermal environment obtained in the {nu} radiation hydrodynamical calculation of the gravitational collapse of a 40M{sub Circled-Dot-Operator} star leading to the black hole formation. This comparison suggests that quark matter is likely to be formed, and the QCD critical point may be swept.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Assessment of tungsten/rhenium thermocouples with metal-carbon eutectic fixed points up to 1500°C

Four Type A thermocouples and two Type C thermocouples were calibrated at the Au fixed point and Co-C and Pd-C eutectic fixed points. The thermocouples were exposed to 1330 °C for a total of 100 hours. The maximum drift due to the exposure was found to be 4.8 °C. The fixed-point calibration EMF of these thermocouples deviated by less than 0.86% from the temperature specified by the standards ASTM E230-2003 for Type C and GOSTR 8.585-2001 for Type A. The length of one of Type A thermocouples A52 is longer than the others by 150mm. Making use of this provision it was possible to place annealed part of A52 to the temperature gradient part of calibration arrangement every time. Therefore observed aging effect was as low as 0.5 °C compared to the other thermocouples.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

An InGaAs detector based radiation thermometer and fixed-point blackbodies for temperature scale realization at NIM

In this paper, we describe an InGaAs detector based radiation thermometer (IRT) and new design of fixed-point blackbodies, including Sn, Zn, Al and Cu, for the establishment of a temperature scale from 200 °C to 1085 °C at the National Institute of Metrology of China. The construction and calibration of the IRT with the four fixed-point blackbodies are described. Characteristics of the IRT, such as the size-of-source effect, the amplifier performance and its stability are determined. The design of the four fixed-points, with 10 mm diameter of aperture and 0.9999 emissivity, is described. The uncertainty of the scale realization is elaborated.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Turning point temperature and competition between relativistic and ponderomotive effects in self-focusing of laser beam in plasma

The propagation characters of Gaussian laser beam in collisionless plasma are investigated by considering the ponderomotive and relativistic nonlinearities. The second-order differential equation of dimensionless beam width parameter is solved numerically, taking into account the effect of electron temperature. The results show that the ponderomotive force does not facilitate the relativistic self-focusing in all intensity ranges. In fact, there exists a certain intensity value that, if below this value, the ponderomotive nonlinearity can contribute to the relativistic self-focusing, or obstruct it, if above. It is also indicated that there is a temperature interval in which self-focusing can occur, while the beam diverges outside of this region. In addition, the results represent the existence of a “turning point temperature” in the mentioned interval that the self-focusing has the strongest power. The value of the turning point is dependent on laser intensity in which higher intensities result in higher turning point.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The effect of guide-field and boundary conditions on collisionless magnetic reconnection in a stressed X-point collapse

Works of Tsiklauri and Haruki [Phys. Plasmas 15, 102902 (2008); 14, 112905 (2007)] are extended by inclusion of the out-of-plane magnetic (guide) field. In particular, magnetic reconnection during collisionless, stressed X-point collapse for varying out-of-plane guide-fields is studied using a kinetic, 2.5D, fully electromagnetic, relativistic particle-in-cell numerical code. For zero guide-field, cases for both open and closed boundary conditions are investigated, where magnetic flux and particles are lost and conserved, respectively. It is found that reconnection rates, out-of-plane currents and density in the X-point increase more rapidly and peak sooner in the closed boundary case, but higher values are reached in the open boundary case. The normalized reconnection rate is fast: 0.10-0.25. In the open boundary case it is shown that an increase of guide-field yields later onsets in the reconnection peak rates, while in the closed boundary case initial peak rates occur sooner but are suppressed. The reconnection current changes similarly with increasing guide-field; however for low guide-fields the reconnection current increases, giving an optimal value for the guide-field between 0.1 and 0.2 times the in-plane field in both cases. Also, in the open boundary case, it is found that for guide-fields of the order of the in-plane magnetic field, the generation of electron vortices occurs. Possible causes of the vortex generation, based on the flow of decoupled particles in the diffusion region and localized plasma heating, are discussed. Before peak reconnection onset, oscillations in the out-of-plane electric field at the X-point are found, ranging in frequency from approximately 1 to 2 ω{sub pe} and coinciding with oscillatory reconnection. These oscillations are found to be part of a larger wave pattern in the simulation domain. Mapping the out-of-plane electric field along the central lines of the domain over time and applying a 2D Fourier transform reveal that the waves predominantly correspond to the ordinary and the extraordinary mode and hence may correspond to observable radio waves such as solar radio burst fine structure spikes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Direct observations of L-I-H and H-I-L transitions with the X-point reciprocating probe in ASDEX Upgrade

A reciprocating Langmuir probe was used to directly measure the behavior of turbulence and flows in the X-point region during transitions between low-(L) and high-confinement (H) mode in ASDEX Upgrade. The probe traverses the divertor horizontally in 140 ms, typically 2–5 cm below the X-point. Toroidal Mach number, density, floating potential (ϕ{sub f}), and electron temperature (T{sub e}) are measured. In the regime accessible to the probe (P{sub inj}<1.5 MW, line-integrated core density <4×10{sup 19} m{sup −2}), the L-H transition features an intermediate phase (I-phase), characterized by limit-cycle oscillations at 0.5–3 kHz [Conway et al., Phys. Rev. Lett. 106, 065001 (2011)]. The probe measurements reveal that this pulsing affects both the density and the toroidal Mach number. It is present in both the low-(LFS) and high-field sides (HFS) of the scrape-off layer, while high-amplitude broadband turbulence usually dominates the private-flux region. Profile comparisons between L-mode and I-phase show lower density in pulsing regions and small shifts in T{sub e}, directed oppositely on LFS and HFS, which are compensated by shifts in ϕ{sub f} to yield a surprisingly unchanged plasma potential profile. Directly observed L-I-phase transitions reveal that the onset of the pulsing is preceded by a fast 50% density drop in the HFS X-point region. Back transitions to L-mode occur essentially symmetrically, with the pulsing stopping first, followed by a fast recovery to L-mode density levels in the divertor.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

An inversion-relaxation approach for sampling stationary points of spin model Hamiltonians

Sampling the stationary points of a complicated potential energy landscape is a challenging problem. Here, we introduce a sampling method based on relaxation from stationary points of the highest index of the Hessian matrix. We illustrate how this approach can find all the stationary points for potentials or Hamiltonians bounded from above, which includes a large class of important spin models, and we show that it is far more efficient than previous methods. For potentials unbounded from above, the relaxation part of the method is still efficient in finding minima and transition states, which are usually the primary focus of attention for atomistic systems.

74 ATOMIC AND MOLECULAR PHYSICS↗

The features of ballistic electron transport in a suspended quantum point contact

A suspended quantum point contact and the effects of the suspension are investigated by performing identical electrical measurements on the same experimental sample before and after the suspension. In both cases, the sample demonstrates conductance quantization. However, the suspended quantum point contact shows certain features not observed before the suspension, namely, plateaus at the conductance values being non-integer multiples of the conductance quantum, including the “0.7-anomaly.” These features can be attributed to the strengthening of electron-electron interaction because of the electric field confinement within the suspended membrane. Thus, the suspended quantum point contact represents a one-dimensional system with strong electron-electron interaction.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Octupolar out-of-plane magnetic field structure generation during collisionless magnetic reconnection in a stressed X-point collapse

The out-of-plane magnetic field, generated by fast magnetic reconnection, during collisionless, stressed X-point collapse, was studied with a kinetic, 2.5D, fully electromagnetic, relativistic particle-in-cell numerical code, using both closed (flux conserving) and open boundary conditions on a square grid. It was discovered that the well known quadrupolar structure in the out-of-plane magnetic field gains four additional regions of opposite magnetic polarity, emerging near the corners of the simulation box, moving towards the X-point. The emerging, outer, magnetic field structure has opposite polarity to the inner quadrupolar structure, leading to an overall octupolar structure. Using Ampere's law and integrating electron and ion currents, defined at grid cells, over the simulation domain, contributions to the out-of-plane magnetic field from electron and ion currents were determined. The emerging regions of opposite magnetic polarity were shown to be the result of ion currents. Magnetic octupolar structure is found to be a signature of X-point collapse, rather than tearing mode, and factors relating to potential discoveries in experimental scenarios or space-craft observations are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Bowl breakout: Escaping the positive region when searching for saddle points

We present a scheme improving the minimum-mode following method for finding first order saddle points by confining the displacements of atoms to the subset of those subject to the largest force. By doing so it is ensured that the displacement remains of a local character within regions where all eigenvalues of the Hessian matrix are positive. However, as soon as a region is entered where an eigenvalue turns negative all atoms are released to maintain the ability of determining concerted moves. Applying the proposed scheme reduces the required number of force calls for the determination of connected saddle points by a factor two or more compared to a free search. Furthermore, a wider distribution of the relevant low barrier saddle points is obtained. Finally, the dependency on the initial distortion and the applied maximal step size is reduced making minimum-mode guided searches both more robust and applicable.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The flux-coordinate independent approach applied to X-point geometries

A Flux-Coordinate Independent (FCI) approach for anisotropic systems, not based on magnetic flux coordinates, has been introduced in Hariri and Ottaviani [Comput. Phys. Commun. 184, 2419 (2013)]. In this paper, we show that the approach can tackle magnetic configurations including X-points. Using the code FENICIA, an equilibrium with a magnetic island has been used to show the robustness of the FCI approach to cases in which a magnetic separatrix is present in the system, either by design or as a consequence of instabilities. Numerical results are in good agreement with the analytic solutions of the sound-wave propagation problem. Conservation properties are verified. Finally, the critical gain of the FCI approach in situations including the magnetic separatrix with an X-point is demonstrated by a fast convergence of the code with the numerical resolution in the direction of symmetry. The results highlighted in this paper show that the FCI approach can efficiently deal with X-point geometries.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Atomic-scale investigation of point defects and hydrogen-solute atmospheres on the edge dislocation mobility in alpha iron

In this study, we present atomistic mechanisms of 1/2 [111](11{sup ¯}0) edge dislocation interactions with point defects (hydrogen and vacancies) and hydrogen solute atmospheres in body centered cubic (bcc) iron. In metals such as iron, increases in hydrogen concentration can increase dislocation mobility and/or cleavage-type decohesion. Here, we first investigate the dislocation mobility in the presence of various point defects, i.e., change in the frictional stress as the edge dislocation interacts with (a) vacancy, (b) substitutional hydrogen, (c) one substitutional and one interstitial hydrogen, (d) interstitial hydrogen, (e) vacancy and interstitial hydrogen, and (f) two interstitial hydrogen. Second, we examine the role of a hydrogen-solute atmosphere on the rate of local dislocation velocity. The edge dislocation simulation with a vacancy in the compression side of the dislocation and an interstitial hydrogen atom at the tension side exhibit the strongest mechanical response, suggesting a higher potential barrier and hence, the higher frictional stress (i.e., ∼83% higher than the pure iron Peierls stress). In the case of a dislocation interacting with a vacancy on the compressive side, the vacancy binds with the edge dislocation, resulting in an increase in the friction stress of about 28% when compared with the Peierls stress of an edge dislocation in pure iron. Furthermore, as the applied strain increases, the vacancy migrates through a dislocation transportation mechanism by attaining a velocity of the same order as the dislocation velocity. For the case of the edge dislocation interacting with interstitial hydrogen on the tension side, the hydrogen atom jumps through one layer perpendicular to the glide plane during the pinning-unpinning process. Finally, our simulation of dislocation interactions with hydrogen show first an increase in the local dislocation velocity followed by a pinning of the dislocation core in the atmosphere, resulting in resistance to dislocation motion as the dislocation moves though the hydrogen-solute atmospheres. With this systematic, atomistic study of the edge dislocation with various point defects, we show significant increase in obstacle strengths in addition to an increase in the local dislocation velocity during interaction with solute atmospheres. The results have implications for constitutive development and modeling of the hydrogen effect on dislocation mobility and deformation in metals.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Insensitivity of the octahedral spherical hohlraum to power imbalance, pointing accuracy, and assemblage accuracy

The random radiation asymmetry in the octahedral spherical hohlraum [K. Lan et al., Phys. Plasmas 21, 0 10704 (2014)] arising from the power imbalance, pointing accuracy of laser quads, and the assemblage accuracy of capsule is investigated by using the 3-dimensional view factor model. From our study, for the spherical hohlraum, the random radiation asymmetry arising from the power imbalance of the laser quads is about half of that in the cylindrical hohlraum; the random asymmetry arising from the pointing error is about one order lower than that in the cylindrical hohlraum; and the random asymmetry arising from the assemblage error of capsule is about one third of that in the cylindrical hohlraum. Moreover, the random radiation asymmetry in the spherical hohlraum is also less than the amount in the elliptical hohlraum. The results indicate that the spherical hohlraum is more insensitive to the random variations than the cylindrical hohlraum and the elliptical hohlraum. Hence, the spherical hohlraum can relax the requirements to the power imbalance and pointing accuracy of laser facility and the assemblage accuracy of capsule.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗