Search NASA⌕ Search

SEARCH · Search NASA

Results for “RADIOACTIVE MATERIALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Evaluation of Preventative Radiological/Nuclear Detector Archetypes to Validate Repurpose to the Consequence Management Mission

In the event of a radiological or nuclear emergency involving a large-scale release of radioactive material, local responders would be the primary means to perform radiation measurements to assess impacts and issue protective action recommendations for the responders and the public. Over the first 24-36 hours, Federal responders and resources will deploy to augment the local efforts, and if necessary, provide extensive radiation monitoring and assessment capabilities coordinated by the Department of Energy-led Federal Radiological Monitoring and Assessment Center and Federal Emergency Management Agency-led Multiagency Coordination Group. Unless Federal resources happen to be deployed at the moment an incident occurs, such as a preventative radiological/nuclear detection mission for a scheduled special event, the local response to an incident will commence and persist for many hours with no on-scene Federal support. For a catastrophic incident, such as a nuclear detonation or severe reactor accident, the local jurisdictions may not have a full range of adequate supplies of health physics instruments and personnel dosimetry. Therefore early in a crisis, the local responders will inevitably conduct their operations with the radiation detection and dosimetry capabilities that they have available until additional resources and support are requested and arrive. Most of the radiation detection instruments currently fielded at the local level are carried by law enforcement personnel and are designed for interdiction missions - referred to here as preventative radiological/nuclear detection (PRND) instruments. This study investigated how this PRND equipment can be repurposed in consequence management (CM) missions.

61 RADIATION PROTECTION AND DOSIMETRY↗

Process for Conducting a Cost Benefit Analysis for New Radiation Portal Monitors

The Domestic Nuclear Detection Office (DNDO) has deployed over 1,400 radiation portal monitors (RPMs) around the United States to enhance border security. DNDO is now considering deployment of a newer generation of RPMs, intended to have equal or better sensitivity but a considerably lower nuisance alarm rate due to Naturally Occurring Radioactive Material (NORM) that is common in the stream of commerce. If the nuisance alarm rate is sufficiently reduced at a site, US Customs and Border Protection (CBP) may be able to reduce the staffing necessary to respond to nuisance alarms generated by the RPMs. This document provides an overview of some possible processes for conducting a cost benefit analysis to place a reliable dollar amount on the value of these new systems. While there is no hard and fast guide for conducting a cost benefit analysis, an austere method is provided for quick estimating. Two robust methods are also provided, one taking guidance from an Office of Management and Budget circular and the other from the Government Accountability Office.

99 GENERAL AND MISCELLANEOUS↗

Establish Fuel Qualification Expectations

The objective of this white paper is to provide an overview of the state of knowledge regarding issues associated with fuel qualification for a liquid-fueled molten salt reactor. The overview consists of fuel qualification expectations for heterogeneous reactors—conventional light water reactors, plus advanced reactors such as sodium fast reactors and modular high-temperature gas-cooled reactors—which consider the mechanical behavior of the fuel itself, interaction between fuel and its cladding, behavior of the cladding, and structural behavior of fuel assemblies. Fuel qualification expectations for molten salt reactors are viewed in contrast to the fuel qualification for heterogeneous reactors in that the fuel is liquid (molten) and there is no accumulation of mechanical effects such as stress, creep, or swelling. However, the liquid fuel salts do accumulate fission products, corrosion byproducts, and buildup of actinides which impact the chemistry of the fuel salt and thermal-physical properties that may impact the ability to remove heat from the core and retain radioactive materials in the fuel salt. Finally, the role of the US Department of Energy in research on tri-structural-isotropic and metal fuel for advanced reactors for fuel qualification purposes is briefly discussed as a potential model for the Department’s research to gather quality chemical and thermal-physical property data necessary to qualify MSR fuel performance under normal and accident conditions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

RPM Deployment Requirements for State and Local Use

Radiation Portal Monitors (RPMs) are instruments that passively detect gamma and neutron radiation for screening people, objects, cargo and transports. RPMs have been deployed around the U.S. and other international borders, for the interdiction of radioactive materials that are deemed as threats. Instruments such as RPMs need to be deployed and operated in a specified manner in order to correctly execute their purpose. The deployment and operation of RPMs can be based on national and international standards and specifications. This document provides guidance on the appropriate deployment of RPMs for State and Local Government use, specifically for Ludlum Technology (Sweetwater, TX) model 4500 RPMs provided by the Department of Homeland Security.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Lab touts plutonium storage best practices for Japanese visitors

Engineers from Japan's Oarai Research and Development Center's Plutonium Fuel Research Facility visited TA-55's Plutonium Facility 4 (PF-4) recently to learn best practices from the Laboratory for safely packaging and storing plutonium and other radioactive materials.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

GALE 3.1 Verification Report

This report is documentation of the verification activities that have been performed on GALE-3.1 to ensure that the codes meet the requirements and specifications set forth by NRC and that the code meets its intended purpose. Additional benchmark tests for GALE-3.1 are documented in Appendix A of NUREG-0016, Revision 2 for GALE-BWR 3.1 and Appendix A of NUREG-0017, Revision 2 for GALE-PWR 3.1. These activities are done in accordance with the GALE Software Quality Assurance Plan (PNNL-24249) and the GALE Configuration Management & Maintenance Plan (PNNL-24250). These two plans meet the requirements set for by both PNNL software quality assurance requirements and the NRC’s Software Quality Assurance Program and Guidelines (NUREG/BR-0167). The verification activities are documented to conform to Level 2 requirements of NUREG/BR-0167. Verifications were performed for both GALE-3.1 BWR and GALE-3.1 PWR Codes. The GALE 3.1 BWR and PWR codes are computerized mathematical models for calculating the releases of radioactive material in gaseous and liquid effluents. These computer codes are tools which can be used to determine conformance with the requirements of Appendix I to Title 10, Part 50 of the Code of Federal Regulations (10 CFR 50).

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Dose Rate Evaluation for the ES-3100 Package with HEU Content Using MCNP, ADVANTG, Monaco, and MAVRIC

This paper presents a comparative study of dose rate calculations for the ES-3100 package with highly enriched uranium (HEU) content for different source configurations using computer codes: (1) MCNP; (2) Automated Variance Reduction Generator (ADVANTG)/MCNP; (3) Monaco; and (4) Monaco with Automated Variance Reduction using Importance Calculations (MAVRIC). The Model ES-3100 package was developed at the Y-12 National Security Complex for domestic and international transportation of Type B fissile radioactive material. In this study, six different source configurations (i.e., solid cylinder, cylindrical hemi-shell, cylindrical shell, rectangular plate, cylindrical rod, or cylindrical segment form) having 36 kg of HEU metal inside the package containment vessel (based on configurations in the ES-3100/HEU safety analysis report for packaging) are evaluated. Dose rates at the package surfaces and 1 m from the package surfaces are calculated for these different source configurations. MCNP and Monaco cases are run without any biasing options to accelerate the convergence. Consistent Adjoint Driven Importance Sampling (CADIS) and Forward-Weighted CADIS (FW-CADIS) methods developed at the Oak Ridge National Laboratory are implemented in ADVANTG/MCNP and MAVRIC codes to accelerate the convergence. ADVANTG generates variance reduction parameters using Denovo code, and MCNP is used with the variance reduction parameters to accelerate the convergence. MAVRIC uses Denovo code to construct an importance map and a biased source distribution that are supplied to Monaco to accelerate the Monte Carlo simulation. The FW-CADIS option in ADVANTG and MAVRIC is used to accelerate the convergence in this study. The accelerated convergence cases (ADVANTG/MCNP and MAVRIC) are about 100 times faster with 100 times less particle simulation than those cases run without biasing options (analog MCNP and analog Monaco). The MCNP, ADVANTG/MCNP, Monaco, and MAVRIC calculated dose rates at the package surfaces and at 1 m from the package surfaces for the different source configurations are compared and are found to be in general agreement.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

FUEL PERFORMANCE MODELING OF REACTIVITY-INITIATED ACCIDENTS USING THE BISON CODE

The Fukushima Daiichi nuclear accidents in 2011 sparked considerable interest in the U.S. to develop new nuclear fuel with enhanced accident tolerance. Throughout the development of these new fuel concepts they will be extensively modeled using specialized computer codes and experimentally tested for a variety of different postulated accident scenarios. One accident scenario of interest, reactivity-initiated accident, is a nuclear reactor event involving a sudden increase in fission rate that causes a rapid increase in reactor power and temperature of the fuel which can lead to the failure of the fuel rods and a release of radioactive material. The focus of this work will be on the fuel performance modeling of reactivity-initiated accidents using the BISON code being developed at Idaho National Laboratory. The overall goal of this work is to provide the best possible modeling predictions for future experimental tests. Accurate predictive capability modeling using BISON is important for safe operation of these tests and provides a cheaper alternative to the expensive experiments.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

LANL Meteorological Program Improvements to Continue Meeting Annual 90 Percent Data Recovery Requirements

Recently, the Los Alamos National Laboratory (LANL) Environmental Protection and Compliance (EPC) and Safety Basis (SB) Divisions have collaborated on the latter’s use of the meteorological data as input into dispersion analysis used to determine receptor dose consequences as a result of an accidental release of radioactive material from a LANL nuclear facility. The dose consequence calculations are part of the Department of Energy (DOE) approved Documented Safety Analysis (DSA), which describes the processes, hazards, and controls of nuclear operations within certain facilities at LANL. The DOE approved DSA is required according to Title 10 of the Code of Federal Regulations Part 830 (10CFR830), “Nuclear Safety Management” and is developed in accordance with the 10CFR830, Subpart B “Safety Basis” safe harbor methodology identified as DOE Standard 3009-94, or successor document (DOE STD 3009-94).

54 ENVIRONMENTAL SCIENCES↗

Nanodilatometry to measure length changes due to radiation damage in naturally aged Pu specimens

Radioactive materials are self-damaging, which over time, impacts many physical and mechanical properties. One well documented effect is a change in density due to swelling from the accumulated damage to the atomic structure and in the case of α-decay, helium in-growth. In some materials, void growth has been shown to develop, where after a period of incubation, the material swells at a rapid rate, with deleterious effects. A second contrasting effect occurs in Ga stabilized δ-Pu, which is thermodynamically unstable and can partially transform to α’-Pu, a phase 20% denser and thus will cause contraction. Such changes can be observed through several experimental techniques. A change in length, measured by dilatometry is perhaps the simplest to understand, and best characterization of bulk. This report describes the development and testing of a dilatometer capable of measuring length changes resulting from radiation damage in standard weapons grade plutonium over a reasonable time scale (~ 1 month) and the preliminary results of measurements on plutonium samples. The dilatometer has the ability to measure swelling in samples between 0-100°C, a temperature range of programmatic interest.

36 MATERIALS SCIENCE↗

Gamma-ray raster imaging with robotic data collection. FY18 report

This project has developed an alternative imaging capability for measuring radioactive materials in situ. This approach uses a robotic-mounted gamma-ray detector which can move around an area of interest, sampling the space at a high frequency. By rastering across the area, an image can be created with no collimation and a high efficiency. A regression model was developed to map out material distribution as the robot moves through the environment. An informative path planning algorithm was also developed to maximize the information collected throughout the movement path. The use of a robotic mount allows data collection for long periods of time unattended, and it will also eliminate uncertainties in positioning typically introduced by personnel. This approach will be particularly relevant for gloveboxes, shielded cells, or process piping which may have complex, non-uniform distributions of material.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

2017 Annual Site Environmental Report

Los Alamos National Laboratory’s (the Laboratory’s) annual site environmental reports are prepared annually by the Laboratory’s environmental organizations, as required by U.S. Department of Energy Order 231.1B, Administrative Change 1, Environment, Safety, and Health Reporting, and Order 458.1, Administrative Change 3, Radiation Protection of the Public and the Environment. The following chapters in this report discuss our success in complying with environmental laws, regulations, and orders (Chapter 2, Compliance Summary); how we manage the Laboratory’s environmental performance (Chapter 3, Environmental Programs); how we monitor for air emissions of radioactive materials and climate conditions (Chapter 4, Air Quality); how we monitor for effects of Laboratory operations on groundwater quality (Chapter 5, Groundwater Monitoring); how we monitor the movement of chemicals and radionuclides by storm water runoff and the levels of chemicals and radionuclides in deposited sediment (Chapter 6, Watershed Quality); how we monitor for the presence, levels, and effects of chemicals and radionuclides in plants, animals, soil, and vegetation (Chapter 7, Ecosystem Health); and finally, what radionuclide dose or risk from chemical exposure members of the public may experience as a result of Laboratory operations (Chapter 8, Public Dose and Risk Assessment).

54 ENVIRONMENTAL SCIENCES↗

A Micro-Thermionic Ionization Source for Chemical Detection

The major goal of this project was to develop an ionization-based detector that could be integrated into the portable gas chromatography systems currently produced by Defiant Technologies. This new detector would allow Defiant to analyze a broader range of analytes and enter new markets. There was also an interest in testing the new ionization source in an ion mobility spectrometer (IMS) that is produced by Sandia National Laboratories. Not only could this eliminate the need for a radioactive material in the IMS, it would offer Defiant the opportunity to add a whole new product line to their chemical analysis systems. Significant progress was made in the development of a thermionic ionization source (TIS) and detector. Using a MEMs heater was an attractive concept, but it proved to be an unfruitful approach because of the fragility of the devices at elevated temperatures. A rugged alternative heater was developed using nichrome wire and alumina tubes. These heaters are simple to make, and, for low quantity production, will be considerably cheaper to construct than MEMs devices. This work has provided a firm basis for follow-on projects. There is now a solid concept for constructing heater elements where, prior to this work, there was only the hope that MEMs heaters would work. In addition, the electrometer that was developed works better than the commercial rack-mounted system that was originally used in this study. Overcoming these two obstacles provides a clear technical approach for product development. There will be follow on efforts at Defiant Technologies to refine the development of the thermal ionization detector. Designs are being made to combine the TIS and electrometer electronics into a single package with a simple-to-replace TIS element. Further work will also focus on integrating this new detector into portable gas chromatography products and testing to optimize the performance.

47 OTHER INSTRUMENTATION↗

GADRAS Isotope ID User's Manual for Analysis of Gamma-Ray Measurements and API for Linux and Android

Isotope identification algorithms that are contained in the Gamma Detector Response and Analysis Software (GADRAS) can be used for real-time stationary measurement and search applications on platforms operating under Linux or Android operating systems. Since the background radiation can vary considerably due to variations in naturally-occurring radioactive materials (NORM), spectral algorithms can be substantially more sensitive to threat materials than search algorithms based strictly on count rate. Specific isotopes or interest can be designated for the search algorithm, which permits suppression of alarms for non-threatening sources, such as such as medical radionuclides. The same isotope identification algorithms that are used for search applications can also be used to process static measurements. The isotope identification algorithms follow the same protocols as those used by the Windows version of GADRAS, so files that are created under the Windows interface can be copied directly to processors on fielded sensors. The analysis algorithms contain provisions for gain adjustment and energy linearization, which enables direct processing of spectra as they are recorded by multichannel analyzers. Gain compensation is performed by utilizing photo-peaks in background spectra. Incorporation of this energy calibration tasks into the analysis algorithm also eliminates one of the more difficult challenges associated with development of radiation detection equipment.

61 RADIATION PROTECTION AND DOSIMETRY↗

GALE 3.2 Verification Report

This report is documentation of the verification activities that have been performed on GALE-3.2 to ensure that the codes meet the requirements and specifications set forth by NRC and that the code meets its intended purpose. These activities are done in accordance with the GALE Software Quality Assurance Plan (PNNL-24249) and the GALE Configuration Management & Maintenance Plan (PNNL-24250). These two plans meet the requirements set for by both PNNL software quality assurance requirements and the NRC’s Software Quality Assurance Program and Guidelines (NUREG/BR-0167). The verification activities are documented to conform to Level 2 requirements of NUREG/BR-0167. Verifications were performed for both GALE-3.2 BWR and GALE-3.2 PWR Codes. The GALE 3.2 BWR and PWR codes are computerized mathematical models for calculating the releases of radioactive material in gaseous and liquid effluents. These computer codes are tools which can be used to determine conformance with the requirements of Appendix I to Title 10, Part 50 of the Code of Federal Regulations (10 CFR 50).

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Special Bioassay: A Guide for Workers and Their Families

Los Alamos National Laboratory radiological workers are routinely monitored for both external and internal radiation doses. To detect exposure to radiation from external sources, workers wear dosimeters (for example, TLD badges). To detect intakes of radioactive materials (radionuclides), radiological workers are placed on a routine bioassay monitoring protocol: regular analysis of urine samples taken throughout the year.

61 RADIATION PROTECTION AND DOSIMETRY↗

Los Alamos Radiation Protection Internal Dosimetry (Bioassay) Pamphlet

A radionuclide intake happens when a radioactive material enters the body through inhalation or ingestion or through a wound. Because the radiation produced by some materials (such as plutonium, americium, uranium, and tritium) cannot leave the body, we look for the materials themselves in urine samples.

61 RADIATION PROTECTION AND DOSIMETRY↗

Radioisotope Power System Dose Estimation Tool (RPS-DET) User Manual

Radioisotope power systems (RPSs) convert decay heat from radioactive materials to electrical power. The National Aeronautics and Space Administration (NASA) uses RPSs for certain orbiters, landers, rovers, and probes that cannot rely on solar or chemical power. Most of the emitted charged particles in RPS fuels are locally absorbed, and the particles’ kinetic energy is converted into thermal energy as they slow down in the surrounding materials. This heat is subsequently converted into electricity through some form of energy conversion process (e.g., thermoelectric, heat engine, thermionic). While nearly all the charged particles are stopped locally, a non-trivial portion of the emitted neutral particles (neutrons and photons) escape the fuel and are free to interact with surrounding materials. This escaping radiation field can be operationally problematic for certain instruments, materials, electronics, etc., and can cause problems during terrestrial shipping, integration, testing for personnel, instrumentation, etc. Furthermore, the fuel’s emission spectrum evolves over time as the parent isotopes decay away and daughter products accumulate. This changing fuel composition alters characteristics of the ambient radiation field over time, which is further affected by RPS orientation and the surrounding environment. Tools that can rapidly estimate the radiation characteristics of RPSs with various fuel compositions, fuel ages, various RPS orientations, and in/on different spaceflight and planetary scenarios provide researchers with an opportunity to quickly estimate the radiation implications of a given RPS scenario. The RPS dose estimation tool (RPS-DET) provides engineers, scientists and analysts who are not trained in the art of particle transport software with a solution for quickly building, simulating, and analyzing the radiation impacts of various RPS designs in relevant spaceflight and terrestrial environments.

30 DIRECT ENERGY CONVERSION↗