SEARCH · Search NASA
Results for “ReACT”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Promotional effect of surface hydroxyls on electrochemical reduction of CO2 over SnOx/Sn electrode
Tin oxide (SnOx) formation on tin-based electrode surfaces during CO2 electrochemical reduction can have a significant impact on the activity and selectivity of the reaction. In the present study, density functional theory (DFT) calculations have been performed to understand the role of SnOx in CO2 reduction using a SnO monolayer on the Sn(112) surface as a model for SnOx. Water molecules have been treated explicitly and considered actively participating in the reaction. The results showed that H2O dissociates on the perfect SnO monolayer into two hydroxyl groups symmetrically on the surface. CO2 energetically prefers to react with the hydroxyl, forming a bicarbonate (HCO3(t)*) intermediate, which can then be reduced to either formate (HCOO*) by hydrogenating the carbon atom or carboxyl (COOH*) by protonating the oxygen atom. Both steps involve a simultaneous C-O bond breaking. Further reduction of HCOO* species leads to the formation of formic acid in the acidic solution at pH < 4, while the COOH* will decompose to CO and H2O via protonation. Whereas the oxygen vacancy (VO) in the monolayer maybe formed by the reduction of the monolayer, it can be recovered by H2O dissociation, resulting in two embedded hydroxyl groups. However, the hydroxylated surface with two symmetric hydroxyls is energetically more favorable for CO2 reduction than the hydroxylated VO surface with two embedded hydroxyls. The reduction potential for the former has a limiting-potential of -0.20 V (RHE), lower than that for the latter (-0.74 V (RHE)). Compared to the pure Sn electrode, the formation of SnOx monolayer on the electrode under the operating conditions promotes CO2 reduction more effectively by forming surface hydroxyls, thereby, providing a new channel via COOH* to the CO formation, although formic acid is still the major reduction product. The work was supported in part by National Natural Sciences Foundation of China (Grant #21373148 and #21206117). The High Performance Computing Center of Tianjin University is acknowledged for providing services to the computing cluster. CC acknowledges the support of 24 China Scholarship Council (CSC). QG acknowledges the support of NSF-CBET program (Award no. CBET-1438440). DM was supported by the US Department of Energy, Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences. The computations were performed in part using the Molecular Science Computing Facility in the William R. Wiley Environmental Molecular Sciences Laboratory (EMSL), which is a U.S. Department of Energy national scientific user facility located at Pacific Northwest National Laboratory (PNNL) in Richland, Washington.
First principles, microkinetic, and experimental analysis of Lewis acid site speciation during ethanol dehydration on Sn-Beta zeolites
Density functional theory calculations are combined with kinetic measurements of ethanol dehydration to diethyl ether to identify the relative catalytic contributions of structurally distinct speciations of Sn sites in zeolite Beta frameworks. The structural complexities of the Beta framework require nonstandard techniques for entropy and energy calculations, including consideration of anharmonic effects in vibrational modes, employment of quasi-harmonic densities of states methods to evaluate entropies, and use of hybrid density functionals to evaluate binding energies. Calculated energies and entropies are used to construct a microkinetic model that is iteratively refined to identify all kinetically and thermodynamically sensitive reaction steps and intermediates which are subsequently treated with the higher-level methods. The rate and equilibrium constants obtained from this tiered approach agree well with measured reaction orders in ethanol and water. Site balances provide evidence for the interconversion of Sn sites between “closed” configurations that are tetra-coordinated to the framework, open configurations formed by hydrolysis that are tri-coordinated to the framework and contain a hydroxyl ligand and proximal silanol group (“hydroxy-open”), and open tri-coordinate configurations formed by reaction with ethanol, yielding an ethoxy ligand and proximal silanol group (“ethoxy-open”). Closed, hydroxy-open, and ethoxy-open Sn sites adsorb ethanol via distinct modes and react via distinct pathways, with the consequence that prevalent dehydration pathways depend on the speciation of Sn sites under reaction conditions. The kinetic modeling indicates that, under the conditions studied (404 K, 0.5–35 kPa ethanol, 0.1–50 kPa water), bimolecular dehydration on the closed Sn site is the sole kinetically-relevant step, and ethanol, ethanol-ethanol dimers, and ethanol-water dimers are the most abundant surface intermediates. In conclusion, these results highlight the importance of considering the distribution of heteroatom coordination modes to zeolite frameworks under reaction conditions, as well as pathways for their interconversion in the presence of reacting molecules, to obtain more robust mechanistic and kinetic interpretations of catalytic pathways in Lewis acid zeolites.
Abiotic phosphorus recycling from adsorbed ribonucleotides on a ferrihydrite-type mineral: Probing solution and surface species
Iron (Fe) (oxyhydr)oxide minerals, which are amongst most reactive minerals in soils and sediments, are known to exhibit strong adsorption of inorganic phosphate (P i ) and organophosphate (P o ) compounds. Beyond synthetic P o compounds, much still remains unknown about the reactivity of these minerals to transform naturally-occurring P o compounds to P i , particularly with respect to solution versus surface speciation of P o hydrolysis. To investigate this reactivity with a ferrihydrite-type mineral and ribonucleotides, we employed high-resolution liquid chromatography-mass spectrometry (LC-MS), X-ray absorption near-edge structure (XANES), Fourier-transform infrared (FTIR) spectroscopy, and molecular modeling. Kinetic experiments were conducted with the mineral (1 g L -1 ) reacted with adenosine monophosphate, diphosphate, or triphosphate (respectively AMP, ADP, ATP; 50 µM). Analysis of solution organic species by LC-MS implied that only adsorption occurred with AMP and ADP but both adsorption and dephosphorylation of ATP were evident. Maximum adsorption capacities per gram of mineral were 40.6 ± 0.8 µmol AMP, 35.7 ± 1.6 µmol ADP, and 10.9 ± 1.0 µmol ATP; solution dephosphorylated by-products accounted for 15% of initial ATP. Subsequent XANES analysis of the surface species revealed that 16% of adsorbed AMP and 30% of adsorbed ATP were subjected to dephosphorylation, which was not fully quantifiable from the solution measurements. Molecular simulations predicted that ADP and ATP were complexed mainly via the phosphate groups whereas AMP binding also involved multiple hydrogen bonds with the adenosine moiety; our FTIR data confirmed these binding confirmations. Lastly, our findings thus imply that specific adsorption mechanisms dictate the recycling and subsequent trapping of Pi from ribonucleotide-like biomolecules reacted with Fe (oxyhydr)oxide minerals.
Construction of low dissipative high-order well-balanced filter schemes for non-equilibrium flows
The goal of this paper is to generalize the well-balanced approach for non-equilibrium flow studied by Wang et al. (2009) to a class of low dissipative high-order shock-capturing filter schemes and to explore more advantages of well-balanced schemes in reacting flows. More general 1D and 2D reacting flow models and new examples of shock turbulence interactions are provided to demonstrate the advantage of well-balanced schemes. The class of filter schemes developed by Yee et al. (1999) , Sjoegreen and Yee (2004) and Yee and Sjoegreen (2007) consist of two steps, a full time step of spatially high-order non-dissipative base scheme and an adaptive non-linear filter containing shock-capturing dissipation. A good property of the filter scheme is that the base scheme and the filter are stand-alone modules in designing. Therefore, the idea of designing a well-balanced filter scheme is straightforward, i.e. choosing a well-balanced base scheme with a well-balanced filter (both with high-order accuracy). A typical class of these schemes shown in this paper is the high-order central difference schemes/predictor-corrector (PC) schemes with a high-order well-balanced WENO filter. The new filter scheme with the well-balanced property will gather the features of both filter methods and well-balanced properties: it can preserve certain steady-state solutions exactly; it is able to capture small perturbations, e.g. turbulence fluctuations; and it adaptively controls numerical dissipation. Thus it shows high accuracy, efficiency and stability in shock/turbulence interactions. Numerical examples containing 1D and 2D smooth problems, 1D stationary contact discontinuity problem and 1D turbulence/shock interactions are included to verify the improved accuracy, in addition to the well-balanced behavior.
Hybrid approaches for multiple-species stochastic reaction–diffusion models
Reaction–diffusion models are used to describe systems in fields as diverse as physics, chemistry, ecology and biology. The fundamental quantities in such models are individual entities such as atoms and molecules, bacteria, cells or animals, which move and/or react in a stochastic manner. If the number of entities is large, accounting for each individual is inefficient, and often partial differential equation (PDE) models are used in which the stochastic behaviour of individuals is replaced by a description of the averaged, or mean behaviour of the system. In some situations the number of individuals is large in certain regions and small in others. In such cases, a stochastic model may be inefficient in one region, and a PDE model inaccurate in another. To overcome this problem, we develop a scheme which couples a stochastic reaction–diffusion system in one part of the domain with its mean field analogue, i.e. a discretised PDE model, in the other part of the domain. The interface in between the two domains occupies exactly one lattice site and is chosen such that the mean field description is still accurate there. In this way errors due to the flux between the domains are small. Our scheme can account for multiple dynamic interfaces separating multiple stochastic and deterministic domains, and the coupling between the domains conserves the total number of particles. The method preserves stochastic features such as extinction not observable in the mean field description, and is significantly faster to simulate on a computer than the pure stochastic model. - Highlights: • A novel hybrid stochastic/deterministic reaction–diffusion simulation method is given. • Can massively speed up stochastic simulations while preserving stochastic effects. • Can handle multiple reacting species. • Can handle moving boundaries.
A weighted state redistribution algorithm for embedded boundary grids
State redistribution is an algorithm that stabilizes cut cells for embedded boundary grid methods. This work extends the earlier algorithm in several important ways. First, state redistribution is extended to three spatial dimensions. Second, we discuss several algorithmic changes and improvements motivated by the more complicated cut cell geometries that can occur in higher dimensions. In particular, we introduce a weighted version with less dissipation in an easily generalizable framework. Third, we demonstrate that state redistribution can also stabilize a solution update that includes both advective and diffusive contributions. Notably, the stabilization algorithm is shown to be effective for incompressible as well as compressible reacting flows. Finally, we discuss the implementation of the algorithm for several exascale-ready simulation codes based on AMReX, demonstrating ease of use in combination with domain decomposition, hybrid parallelism and complex physics.
Glass transition temperature studies of planetary ball milled glasses: Accessing the rapidly cooled glassy state in Na 4 P 2 S 7-x O x , 0 ≤ x ≤ 7, Oxy-thio phosphate glasses
This paper details the very first in-depth study of the glass transition temperature (T g ) for planetary balled milled (PBM) Na 4 P 2 S 7-x O x (NaPSO), where 0 ≤ x ≤ 7, glasses. For 0 ≤ x ≤ 5, fully amorphous, homogeneous, and chemically reacted compositions can be prepared. For samples with 5 < x ≤ 7, partially amorphous but fully chemically reacted glass-ceramics can be produced. The reproducible, thermally cyclable onset T g and the onset crystallization temperature, T c , were investigated as a function of the composition and of the short-range order (SRO) structures of the glasses. Additionally, we examined the extreme sub-T g exothermic relaxations present due to the high energy milling processing and correspondingly high effective quenching rate. Using a differential scanning calorimeter (DSC) and scanning from well below the onset T g , the glasses are observed to relax exothermally below T g . The integrated relaxation enthalpy, ΔH rel , is ~ 0 for the x = 2 glass, but is significantly exothermic for lower and higher values of x. Once the high fictive state of these glasses has been erased by scanning to above the T g , but below the T c of the glass, the DSC scans of the glasses recover normal behavior for a normally cooled glass without any relaxation exotherm. The T g s of these glasses remain relatively constant for 0 ≤ x ≤ 3, but for glasses with 3 < x ≤ 5, T g increases sharply following the combined effects of the phosphate chain length increasing caused by the formation of bridging oxygens and the increasing concentration of more charge dense non-bridging oxygens (NBOs). For x > 5, both T g and Tc decrease sharply, becoming nearly identical at x = 7 where glass formation essentially ceases. For smaller values of x, T c increases with both chain length and the structural complexity of the composition but decreases sharply for glass-ceramics of x > 5.
Dissolution of Uranium Metal Without Hydride Formation or Hydrogen Gas Generation
This study shows that metallic uranium will cleanly dissolve in carbonate-peroxide solution without generation of hydrogen gas or uranium hydride. Metallic uranium shot, 0.5 to 1 mm diameter, were reacted with ammonium carbonate - hydrogen peroxide solution ranging in concentration from 0.13M to 1.0M carbonate and 0.50M to 2.0M peroxide. The uranium beads were weighed before and after reacting with the etch solution, and from the weights of the beads, their diameters were calculated, before and after the etch. The etch rate on the beads was then calculated from the reduction in bead diameter, and independently by uranium analysis of the solution. The calculated etch rate ranged from about 4 x 10-4 to 8 x 10-4 cm per hour, dependent primarily on the peroxide concentration. A hydrogen analysis of the etched beads showed that no detectable hydrogen was introduced into the uranium metal by the etching process.
Diffusion Couple Investigations of Ce-Sb Compounds with Fe
Fission product lanthanides can migrate to the fuel periphery and react with cladding, causing fuel-cladding chemical interaction (FCCI). Adding a fuel additive dopant, such as Sb, can bind lanthanides, such as Ce, into metallic compounds to prevent migration. The present study focuses on the thermodynamic stability of Ce-Sb compounds when in contact with the major cladding constituent Fe by conducting diffusion couple tests. Here, Ce-Sb compounds have shown high thermodynamic stability as they did not react with Fe; when Fe-Sb compounds contacted with Ce, Sb was separated out of the Fe-Sb compounds and formed the higher stability Ce-Sb compounds.
A U-bearing composite waste form for electrochemical processing wastes
Metallic/ceramic composite waste forms are being developed to immobilize combined metallic and oxide waste streams generated during electrochemical recycling of used nuclear fuel. Composites were made for corrosion testing by reacting HT9 steel to represent fuel cladding, Zr and Mo to simulate metallic fuel waste, and a mixture of ZrO2, Nd2O3, and UO2 to represent oxide wastes. More than half of the added UO2 was reduced to metal and formed Fe-Zr-U intermetallics and most of the remaining UO2 and all of the Nd2O3 reacted to form zirconates. Fe-Cr-Mo intermetallics were also formed. Microstructure characterization of the intermetallic and ceramic phases that were generated and tests conducted to evaluate their corrosion behaviors indicate composite waste forms can accommodate both metallic and oxidized waste streams in durable host phases. (c) 2018 Elsevier B.V. All rights reserved.
Effect of Li metal addition on corrosion control of Hastelloy N and stainless steel 316H in molten LiF-NaF-KF
Molten fluoride salts are used in various energy harvesting applications such as solar collectors and molten salt nuclear reactors (MSRs). Thermodynamically driven selective dissolution of alloying elements due to impurities present within the fluoride salts have been identified to be the main corrosion mechanism for structural alloys in molten fluoride salts. Impurities in these salts, during salt preparation as well as during operation, can be difficult to control. One way to prevent the selective dissolution of active alloying elements is to make the molten salt reducing by either purifying it to remove impurities or to add some reactive metal that will react with the impurities and make the salt reducing. Here this study is focused on the corrosion behaviour of Hastelloy N and 316H stainless steel in molten LiF-NaF-KF eutectic mixture (FLiNaK) at 700°C and how this behaviour changes with the addition of Li metal as a reducing impurity. Our results indicate that the active metal addition like Li can be very effective in controlling the redox behaviour of salt, which in-turn can mitigate corrosion. Even the addition of small quantities of Li metal can mitigate the selective dissolution of active alloying elements for the tested structural materials in FLiNaK. Our results also suggest that the presence of excess amounts of Li, above the minimum concentration required to react with the impurities in FLiNaK, does not have any detrimental effect in terms of formation of new intermetallic phases at the surface of the selected alloys under tested conditions.
Interaction of beryllium with 316H stainless steel in molten Li 2 BeF 4 (FLiBe)
The increased demand in renewable energy resources has led to a renewed interest in nuclear reactors including a new generation of molten salt reactors. One of the issues encountered in handling of molten chloride or fluoride salts is the inability of metals to form and retain a protective oxide surface layer, generally chromium oxide. The low chromium content, nickel-based alloy INOR-8, later marketed as Hastelloy N, was specifically developed to contain molten fluorides. This alloy had some deficiencies, but its composition resulted in it incurring far less chromium depletion by the molten fluoride salts than alloys like 316 stainless steel. For the next generation of molten salt reactors, an alloy with pressure vessel code approval and higher temperature capability than Hastelloy N is required. Consequently, several reactor designers have reportedly chosen to build the reactor containment vessel from 316H stainless steel. In order to minimize corrosion of the stainless steel by the molten fluoride salt (2LiF-BeF 2 ), it is proposed to add beryllium metal to the salt to react with impurities and provide a means to lower the oxidation potential thus making the salt less corrosive. Even so, there is a concern whether the beryllium would react with components of the stainless steel. To address this concern, static capsule tests were conducted in which selected amounts of beryllium were added to capsules containing 2LiF-BeF 2 (FLiBe) salt and 316H stainless steel and Hastelloy N samples. Following exposure, the samples were cleaned and examined using a variety of analysis techniques including, optical microscopy, SEM-EDS, XPS, LIBS, XRD and EPMA. Tensile samples were also exposed in capsules, and those were subjected to tensile testing. Notably, It was found that for the level of beryllium additions used in this study, intermetallic compounds were formed which could be detrimental to the long-term performance of the 316H stainless steel.
Evaluation of the interaction between SiC, pre-oxidized FeCrAlMo with aluminized and pre-oxidized Fe-8Cr-2W in flowing PbLi
We report dissimilar materials interactions are a major concern when liquid metals are used as a working fluid. To simulate a dual-coolant PbLi blanket, chemical vapor deposited (CVD) SiC, pre-oxidized FeCrAlMo (APMT) and pre-oxidized aluminized coating on Fe-8Cr-2 W (F82H) specimens were exposed to flowing commercial Pb-17at.%Li with a peak temperature of 650 °C in a pre-oxidized APMT thermal convection loop (TCL) for 1000 h. Similar to prior results in static PbLi, the coated F82H showed small mass changes and limited degradation of room-temperature tensile properties. After exposure, the α-Al 2 O 3 on the surface coated F82H reacted with the PbLi to form LiAlO 2 . However, no significant Al coating loss or interdiffusion was observed. Mass transfer was observed between the APMT, TCL and the SiC specimens. Fe, Cr and Ni were dissolved into the molten flowing PbLi and transported through the TCL to react with the SiC specimens. Compared to a prior experiment with a majority of bare FeCrAl specimens that were exposed in a TCL with a peak temperature of 700 °C for 1000 h, the SiC reaction was reduced to only a few microns of carbides and silicides. Oxygen dissolved in the molten PbLi sustained the formation of an Al 2 O 3 scale on the surface of the coating and induced the formation of a thin surface SiO 2 layer on the surface of the SiC.
Dimensional reductions from 2-D Nb{sub 4}P{sub 2}S{sub 21} to 1-D ANb{sub 2}PS{sub 10} (A=Na, K, Rb, Cs, Tl) and to 0-D Tl{sub 5}[Nb{sub 2}S{sub 4}C{sub l8}]Cl using halide molten salts
We found new synthetic routes to obtain 1-D quaternary thiophosphate compounds and a 0-D molecular complex containing a Nb{sub 2}S{sub 4} core from a 2-D ternary thiophosphate, Nb{sub 4}P{sub 2}S{sub 21}. When Nb{sub 4}P{sub 2}S{sub 21} was reacted with alkali metal halides (ACl; A=Na, K, Rb, Cs) or TlCl at 500-700 deg. C, the -S-S-S- bridges in 2-D Nb{sub 2}PS{sub 10}-S-S{sub 10}PNb{sub 2} were excised to form a 1-D chain, and cations were inserted between the chains to form ANb{sub 2}PS{sub 10} (A=Na, K, Rb, Cs, Tl). We also found that thallium chloride (TlCl) is an excellent reagent for further excision, and it substitutes chloride ligands for the sulfur ligands of 2-D Nb{sub 4}P{sub 2}S{sub 21} to form the molecular complex Tl{sub 5}[Nb{sub 2}S{sub 4}Cl{sub 8}]Cl. Crystal data for TlNb{sub 2}PS{sub 10}: monoclinic, Pn, a=6.9452(11) A, b=7.3761(12) A, 12.873(2) A, {beta}=104.472(3){sup o}, and Z=2. Crystal data for Tl{sub 5}[Nb{sub 2}S{sub 4}Cl{sub 8}]Cl: orthorhombic, Immm, a=7.001(5) A, b=9.509(7) A, c=15.546(11) A, and Z=2. - Graphical abstract: We developed new synthetic routes to obtain 1-D quaternary thiophosphate compounds and a molecular complex containing a Nb{sub 2}S{sub 4} core from a 2-D ternary thiophosphate, Nb{sub 4}P{sub 2}S{sub 21}. When Nb{sub 4}P{sub 2}S{sub 21} was reacted with alkali metal halides or TlCl, the -S-S-S- bridges in 2-D Nb{sub 2}PS{sub 10}-S-S{sub 10}PNb{sub 2} were excised to form a 1-D chain, and cations were inserted between the chains.
Mechanism for the formation of tin oxide nanoparticles and nanowires inside the mesopores of SBA-15
The formation of polycrystalline tin oxide nanoparticles (NP) and nanowires was investigated using nanocasting approach included solid-liquid strategy for insertion of SnCl{sub 2} precursor and SBA-15 silica as a hard template. HR-TEM and XRD revealed that during the thermal treatment in air 5 nm tin oxide NP with well defined Cassiterite structure were formed inside the SBA-15 matrix mesopores at 250 deg. C. After air calcination at 700 deg. C the NP assembled inside the SBA-15 mesopores as polycrystalline nanorods with different orientation of atomic layers in jointed nanocrystals. It was found that the structure silanols of silica matrix play a vital role in creating the tin oxide NP at low temperature. The pure tin chloride heated in air at 250 deg. C did not react with oxygen to yield tin oxide. Tin oxide NP were also formed during the thermal treatment of the tin chloride loaded SBA-15 in helium atmosphere at 250 deg. C. Hence, it is well evident that silanols present in the silica matrix not only increase the wetting of tin chloride over the surface of SBA-15 favoring its penetration to the matrix pores, but also react with hydrated tin chloride according to the proposed scheme to give tin oxide inside the mesopores. It was confirmed by XRD, N{sub 2}-adsorption, TGA-DSC and FTIR spectra. This phenomenon was further corroborated by detecting the inhibition of SnO{sub 2} NP formation at 250 deg. C after inserting the tin precursor to SBA-15 with reduced silanols concentration partially grafted with tin chloride. - Graphical abstract: The mechanism of formation of polycrystalline tin oxide nanoparticles (NP) and nanowires was investigated using nanocasting approach included solid-liquid strategy for insertion of SnCl{sub 2} precursor and SBA-15 silica as a hard template. It was found that the structure silanols of silica matrix play a vital role in creating the tin oxide NP during thermal treatment.
Swelling, intercalation, and exfoliation behavior of layered ruthenate derived from layered potassium ruthenate
The intercalation chemistry of a layered protonic ruthenate, H{sub 0.2}RuO{sub 2.1}.nH{sub 2}O, derived from a layered potassium ruthenate was studied in detail. Three phases with different hydration states were isolated, H{sub 0.2}RuO{sub 2.1}.nH{sub 2}O (n={approx}0, 0.5, 0.9), and its reactivity with tetrabutylammonium ions (TBA{sup +}) was considered. The layered protonic ruthenate mono-hydrate readily reacted with TBA{sup +}, affording direct intercalation of bulky tetrabutylammonium ions into the interlayer gallery. Fine-tuning the reaction conditions allowed exfoliation of the layered ruthenate into elementary nanosheets and thereby a simplified one-step exfoliation was achieved. Microscopic observation by atomic force microscopy and transmission electron microscopy clearly showed the formation of unilamellar sheets with very high two-dimensional anisotropy, a thickness of only 1.3+-0.1 nm. The nanosheets were characterized by two-dimensional crystallites with the oblique cell of a=0.5610(8) nm, b=0.5121(6) nm and gamma=109.4(2){sup o} on the basis of in-plane diffraction analysis. - Graphical abstract: Layered protonic ruthenate derived from a potassium form was directly reacted with bulky tetrabutylammonium ions to trigger exfoliation into nanosheets as long as it is highly hydrated.