Search NASA⌕ Search

SEARCH · Search NASA

Results for “SIZE DISTRIBUTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

How Old are Lunar Lobate Scarps? 1. Seismic Resetting of Crater Size-Frequency Distributions

Previous studies have estimated the ages of lunar lobate scarps, some of the youngest tectonic landforms on the Moon, based on the estimated life-times of their fresh morphologies and associated small graben, using crater degradation ages, or via buffered and traditional crater size-frequency distribution (CSFD) measurements. Here, we reexamine five scarps previously dated by Binder and Gunga (1985) with crater degradation ages to benchmark the evaluation of both the buffered and traditional CSFD approaches for determination of absolute model ages (AMAs) at scarps. Both CSFD methods yield similar ages for each individual scarp, indicating that fault activity not only can be measured on the scarp itself, but also in the surrounding terrain - an indication that tectonic activity causes surface renewal both adjacent to and even kilometers distant from scarps. Size-frequency variations in the regions surrounding the scarps are thus useful for studying the extent and severity of the ground motion caused by coseismic slip events during scarp formation. All age determination approaches continue to indicate that lunar lobate scarps were active in the late Copernican, with some scarps possibly experiencing activity within the last 100 Ma.

Lunar Lobate Scarps↗

How old are lunar lobate scarps? 1. Seismic resetting of crater size-frequency distributions

Previous studies have estimated the ages of lunar lobate scarps, some of the youngest tectonic landforms on the Moon, based on the estimated life-times of their fresh morphologies and associated small graben, using crater degradation ages, or via buffered and traditional crater size-frequency distribution (CSFD) measurements. Here, we reexamine five scarps previously dated by Binder and Gunga (1985) with crater degradation ages to benchmark the evaluation of both the buffered and traditional CSFD approaches for determination of absolute model ages (AMAs) at scarps. Both CSFD methods yield similar ages for each individual scarp, indicating that fault activity not only can be measured on the scarp itself, but also in the surrounding terrain –an indication that tectonic activity causes surface renewal both adjacent to and even kilometers distant from scarps. Size-frequency variations in the regions surrounding the scarps are thus useful for studying the extent and severity of the ground motion caused by coseismic slip events during scarp formation. All age determination approaches continue to indicate that lunar lobate scarps were active in the late Copernican, with some scarps possibly experiencing activity within the last 100 Ma.

Carolyn H. van der Bogert↗

Discontinuous pore fluid distribution under microgravity--KC-135 flight investigations

Designing a reliable plant growth system for crop production in space requires the understanding of pore fluid distribution in porous media under microgravity. The objective of this experimental investigation, which was conducted aboard NASA KC-135 reduced gravity flight, is to study possible particle separation and the distribution of discontinuous wetting fluid in porous media under microgravity. KC-135 aircraft provided gravity conditions of 1, 1.8, and 10(-2) g. Glass beads of a known size distribution were used as porous media; and Hexadecane, a petroleum compound immiscible with and lighter than water, was used as wetting fluid at residual saturation. Nitrogen freezer was used to solidify the discontinuous Hexadecane ganglia in glass beads to preserve the ganglia size changes during different gravity conditions, so that the blob-size distributions (BSDs) could be measured after flight. It was concluded from this study that microgravity has little effect on the size distribution of pore fluid blobs corresponding to residual saturation of wetting fluids in porous media. The blobs showed no noticeable breakup or coalescence during microgravity. However, based on the increase in bulk volume of samples due to particle separation under microgravity, groups of particles, within which pore fluid blobs were encapsulated, appeared to have rearranged themselves under microgravity.

manned↗

A Triple-Moment Representation of Ice in the Predicted Particle Properties (P3) Microphysics Scheme

In the original Predicted Particle Properties (P3) bulk microphysics scheme, all ice-phase hydrometeors are represented by one or more “free” ice categories, where the physical properties evolve smoothly through changes to the four prognostic variables (per category), and with a two-moment representation of the particle size distribution. As such, the spectral dispersion cannot evolve independently, which thus results in limitations in representation of ice—in particular, hail—due to necessary constraints in the scheme to prevent excessive gravitational size sorting. To overcome this, P3 has been modified to include a three-moment representation of the size distribution of each ice category through the addition of a fifth prognostic variable, the sixth moment of the size distribution. The details of the three-moment ice parameterization in P3 are provided. The behavior of the modified scheme, with the single-ice-category configuration, is illustrated through simulations in a simple 1D kinematic model framework as well as with near large-eddy-resolving (250-m grid spacing) 3D simulations of a hail-producing supercell. It is shown that the three-moment ice configuration controls size sorting in a physically based way and leads to an improved capacity to simulate large, heavily rimed ice (hail), including mean and maximum sizes and reflectivity, and thus an overall improvement in the representation of ice-phase particles in the P3 scheme.

54 ENVIRONMENTAL SCIENCES↗

The Unique Properties of Agricultural Aerosols Measured at a Cattle Feeding Operation

Housing roughly 10 million head of cattle in the United States alone, open air cattle feedlots represent a significant but poorly constrained source of atmospheric particles. Here we present a comprehensive characterization of physical and chemical properties of particles emitted from a large representative cattle feedlot in the Southwest United States. In the summer of 2008, measurements and samplings were conducted at the nominally upwind and downwind edges of the facility. A series of far-field measurements and samplings was also conducted 3.5 km north of the facility. Two instruments, a GRIMM Sequential Mobility Particle Sizer (SMPS) and a GRIMM Portable Aerosol Spectrometer (PAS), were used to measure particle size distributions over the range of 0.01 to 25 μm diameter. Raman microspectroscopy (RM) was used to determine the chemical composition of particles on a single particle basis. Volume size distributions of fugitive dust were dominated by coarse mode particles. Twenty-four hour averaged concentrations of PM10 (particulate matter with a diameter of 10 µm or less) were as high as 1200 μg/m3 during the campaign. The primary constituents of the particulate matter were carbonaceous materials, such as humic acid, water soluble organics, and less soluble fatty acids, including stearic acid and tristearin. A significant fraction of the organic particles was composed of internally mixed with salts. Basic characteristics such as size distribution and composition of agricultural aerosols were found to be different than the properties of those found in urban and semi-urban aerosols. Failing to account for such differences will lead to serious errors in estimates of aerosol effects on climate, visibility, and public health.

54 ENVIRONMENTAL SCIENCES↗

Packing Optimization of Sorbent Bed Containing Dissimilar and Irregular Shaped Media

The Fire Cartridge is a packed bed air filter with two different and separate layers of media designed to provide respiratory protection from combustion products after a fire event on the International Space Station (ISS). The first layer of media is a carbon monoxide catalyst and the second layer of media is universal carbon. During development of Fire Cartridge prototypes, the two media beds were noticed to have shifted inside the cartridge. The movement of media within the cartridge can cause mixing of the bed layers, air voids, and channeling, which could cause preferential air flow and allow contaminants to pass through without removal. An optimally packed bed mitigates these risks and ensures effective removal of contaminants from the air. In order to optimally pack each layer, vertical, horizontal, and orbital agitations were investigated and a packed bulk density was calculated for each method. Packed bulk density must be calculated for each media type to accommodate variations in particle size, shape, and density. Additionally, the optimal vibration parameters must be re-evaluated for each batch of media due to variations in particle size distribution between batches. For this application it was determined that orbital vibrations achieve an optimal pack density and the two media layers can be packed by the same method. Another finding was media with a larger size distribution of particles achieve an optimal bed pack easier than media with a smaller size distribution of particles.

Holland, Nathan↗

Baselining the Indirect Effect by Improving Quantification of Sea Spray and Marine Sources at Ascension Island (Final Report)

Oceans cover two-thirds of the Earth and understanding the interactions of aerosols with clouds in these large marine regions requires quantifying the man-made contributions to the budget of cloud-drop forming particles (known as cloud condensation nuclei, or CCN) relative to the non-manmade “baseline” conditions and understanding the meteorology of boundary layer clouds. Modeling studies have shown substantial uncertainties and sensitivities to natural marine CCN sources, meaning that to reduce uncertainties in indirect effects we must be able to better quantify the CCN budget in ocean regions. While models provide important constraints on these uncertainties, actually reducing uncertainties requires substantial observations in open-ocean and coastal regions in order to establish the baseline on which manmade emissions are added. The tropical South Atlantic Ocean is one of the least-sampled regions of the planet, making the comprehensive measurements of the Department of Energy Atmospheric Radiation Measurement Layered Atlantic Smoke Interactions with Clouds (LASIC) campaign provides the longest record of aerosol size distribution measurements from a differential mobility analyzer in a cloud-influenced marine location in the ARM database, with 17 months of ground-based aerosol size distribution measurements. This project addressed the research topic of Aerosol-Cloud Interactions (ACI) by supporting three publications from the LASIC measurements: 1. The ARM measurements were combined with a new value-added technique that was pioneered by the Russell group for quantifying sea salt. This quantification of sea salt uses supermicron scattering measurements for retrieving reasonable sea spray mass concentrations, providing the best-available, observationally-constrained estimate of the sea spray mode properties when supermicron size distribution measurements are not available. 2. The fitted modes of the distribution were used to investigate the signatures of cloud processing for very clean to very smoky aerosol conditions, revealing not only differences in the particles that activate in clouds but also in the mechanisms that control that droplet formation process. In clean air, the size required to form a cloud droplet is influenced by the number of particles, as well as how quickly particles take up water during growth in cloud. 3. Building on this aerosol characterization, cloud and meteorological conditions were used to evaluate aerosol-related changes in cloud albedo and optical depth. We introduced a new method of decomposing the impact of aerosols on clouds known as the Twomey effect by incorporating retrieved supersaturation from two independent sets of observations to constrain the feedback of aerosol particles on cloud properties. The method quantifies the reduction of the Twomey effect at high aerosol concentrations, which has never been explained quantitatively by observations. In addition, the results provide the first direct validation for the conditions observed in the tropical South Atlantic of a parcel-based approach that is embedded in many climate models. Together these findings illustrate how ARM extended field campaigns in stratocumulus-covered regions can be used to constrain ACI processes with direct observations, providing specific radiative effects without models. By making such process-specific constraints available to improve ACI in global climate models, ARM observations play a key role in supporting model development.

58 GEOSCIENCES↗

Evaluating the Collision‐Coalescence Process in Idealized Cloud Convection Using Large‐Eddy Simulations With Lagrangian Microphysics

Drizzle initiation through the collision and coalescence of cloud droplets plays a crucial role in warm cloud precipitation. Recent theoretical studies suggest that the influence of collisional growth on the droplet size distribution can be quantified by a non-dimensional drizzle number (Dz). Here, large-eddy simulations with Lagrangian microphysics are employed to evaluate the theory by simulating a tall convection-cloud chamber under various conditions. Results show that the smaller the Dz, the larger the impact of collisions on the right tail of the droplet size distribution, consistent with the theory. The simulations confirm that the collision rate can be estimated from the droplet size distribution interacting only with cloud droplets of the same size at the mode radius. This suggests that the idealized theory can be a useful tool to design a cloud chamber for drizzle investigation, as well as to represent drizzle formation in models of real atmospheric clouds.

54 ENVIRONMENTAL SCIENCES↗

Super‐Droplet Method to Simulate Lagrangian Microphysics of Nuclear Fallout in a Homogeneous Cloud

Abstract Nuclear detonations produce hazardous local and global particles or fallout. Predicting fallout size, chemical components, and location is necessary to inform officials and determine immediate guidance for the public. However, existing nuclear detonation fallout models prescribe the particle size distributions based on limited observations. In this work, we apply the super‐droplet method, which is a numerical modeling technique developed for cloud microphysics, to simulate size distributions of particles in a mushroom cloud formed post‐detonation of a nuclear device. We model fallout formation and evolution with homogeneous nucleation and condensation of a single species and a Monte Carlo coagulation algorithm. We verify the numerical methods representing coagulation and condensation processes against analytical test problems. Additionally, we explore several scenarios for the integral system mass and yield in equivalent kilotons (kt) of TNT (trinitrotoluene). The fallout size distribution median diameter d pg follows a scaling law based on the integral system mass m v 0 kg and yield Y kt: nm. We test the effect of cloud turbulence, enhanced nucleation and growth, and vapor volatility with a sensitivity study. The range in median diameter predictions for simulations of historical tests performed over the Pacific encompass the measurements of particles sampled from the cloud caps. Predicted median particle size ranges up to 217, 123, 86, and 35 nm for historical tests with yields of 0.2, 0.7, 2, and 10 Mt, respectively. This work can be expanded in many different directions to build a more predictive model for fallout formation.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

An Electron Backscatter Diffraction (EBSD)-Based Automated Tool for Ceramic Capacitor Grain Size Analysis

Ceramic capacitors continue to be recurring problem parts for NASA, despite best efforts to screen out potential defects and failures through environmental and electrical testing and nondestructive inspection techniques such as acoustic microscopy. The physical properties of ceramic capacitors necessitates thin dielectric layers capable of withstanding significant electric fields. Any defects in those ceramic layers can result in reduced insulation resistance failure modes including short circuit failures, so the quality and consistency of the dielectric material is critical. The size of the individual ceramic grains in the dielectric material is a critical parameter. However, judging “grain size” is not so simple—in a single capacitor there can be wide variation in grain sizes observed. It is theorized that by studying the grain size distributions of “known good” and “known bad” lots of capacitors, some conclusions could be drawn that would allow us to better predict to the reliability of future lots based on grain size distributions. The initial goal of this effort was to find or develop an automated tool that could inspect a capacitor and return grain size distribution results.

Robert Hodson↗

Evaluation of methods for characterizing the fine particulate matter emissions from aircraft and other diffusion flame combustion aerosol sources

The U. S. Environmental Protection Agency in collaboration with the U. S. Air Force Arnold Engineering Development Complex conducted the VAriable Response In Aircraft nvPM Testing (VARIAnT) 3 and 4 test campaigns to compare nvPM emissions measurements from a variety of diffusion flame combustion aerosol sources (DFCASs), including a Cummins diesel engine, a diesel powered generator, two gas turbine start carts, a J85-GE-5 turbojet engine burning multiple fuels, and a Mini-CAST soot generator. The VARIAnT research program has conducted four test campaigns to date with the VARIAnT 3 and 4 test campaigns focusing on BC mass instrument performance, use of gas turbine engine sources for BC mass instrument calibration, and the characterization of the aerosols produced from the combustion sources. Results from both campaigns revealed agreement of about 20% between the AVL Micro-Soot Sensor, the Cavity Attenuated Phase Shift (CAPS PMSSA) monitor and the thermal-optical reference method for elemental carbon (EC), independent of the calibration source used. For the Artium LII-300, the measured mass concentrations in VARIAnT3 fall within 18% and in VARIAnT4 fall within 32% of the reference EC mass concentration when calibrated on a combustor rig in VARIAnT3 and on a LGT-60 start cart in VARIAnT4, respectively. It was also found that the three mass instrument types (MSS, CAPS PMSSA, and LII-300) can exhibit different BC to reference EC ratios depending on the emission source that appear to correlate to particle geometric mean mobility diameter, morphology, or some other parameter associated with particle geometric mean diameter (GMD) with the LII-300 showing a slightly stronger apparent trend with GMD. Systematic differences in LII-300 measured mass concentrations have been reduced by calibrating with a turbine combustion source (combustor or turbine engine). With respect to the particle size measurements made, the sizing instruments (TSI SMPS, TSI EEPS, and Cambustion DMS 500) were found to be in general agreement in terms of size distributions and concentrations with some exceptions. Teflon filter measurements of the total aerosol mass produced by the various DFCASs differed from the reference EC, BC, and integrated particle sized distribution measured aerosol masses. The Teflon filter measured mass was 30 to 40% greater than the reference EC and 50 to 60% greater than the BC mass for the J85 in both test campaigns. The measurements of particle size distributions and single particle analysis by miniSPLAT indicated the presence of large particles (>100 nm) having more compact morphologies, higher effective density, and a composition dominated by OC and ash. This increased large particle fraction is also associated with higher values of single scattering albedo measured by the CAPS PMSSA instrument and higher OC/EC measurements. These measurements indicate gas turbine engine emissions can be a more heterogeneous mix of particle types beyond the original E31 assumption that it is mainly composed of black carbon.

33 ADVANCED PROPULSION SYSTEMS↗

Photocatalytic hydrogen production using visible-light-responsive Ta{sub 3}N{sub 5} photocatalyst supported on monodisperse spherical SiO{sub 2} particulates

Graphical abstract: A simple and effective sol–gel process followed by nitridation in an NH{sub 3} flow has been developed to deposit Ta{sub 3}N{sub 5} semiconductor photocatalyst layers onto monodisperse spherical SiO{sub 2} particles. The obtained Ta{sub 3}N{sub 5}/SiO{sub 2} particles maintain an original spherical morphology of SiO{sub 2} and a sub-micrometer size with a narrow size distribution and without aggregation. The presence of SiO{sub 2} support shows at least no detrimental effects on photocatalytic activity, but tunes the secondary particle size to control dispersibility of the photocatalyst in the solution. - Highlights: • Fine nanoparticles of Ta{sub 3}N{sub 5} were immobilized on the surfaces of SiO{sub 2} giving SiO{sub 2}@Ta{sub 3}N{sub 5} core–shell spheres successfully produced H{sub 2} from methanol solution under visible light. • The presence of support (SiO{sub 2}) ensures the dispersion of the particulate in solution maintaining high photocatalytic activity of Ta{sub 3}N{sub 5}. • The obtained supported photocatalyst gives uniform size distribution and control the degree of dispersibility in the solution, which may control nature of light absorption and reflection of the photoreactor. - Abstract: Fine nanoparticles of Ta{sub 3}N{sub 5} (10–20 nm) were synthesized on the surfaces of SiO{sub 2} spheres with a diameter of ∼550 nm. A sol–gel method was used to modify the surface of SiO{sub 2} with Ta{sub 2}O{sub 5} from TaCl{sub 5} dissolved in ethanol in the presence of citric acid and polyethylene glycol. The resulting oxide composites were treated in an NH{sub 3} flow at 1123 K to form core–shell structured Ta{sub 3}N{sub 5}/SiO{sub 2} sub-microspheres. The obtained samples were characterized using powder X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectra (EDX), transmission electron microscopy (TEM), and photocatalytic activity measurements for H{sub 2} evolution from an aqueous methanol solution. The XRD results demonstrate the expected sequential formation of Ta{sub 2}O{sub 5} layers, followed by Ta{sub 3}N{sub 5} after nitridation on the Ta{sub 2}O{sub 5}/SiO{sub 2} composite. SEM and TEM observations indicate that the obtained Ta{sub 3}N{sub 5}/SiO{sub 2} sub-microspheres have a uniform size distribution with high crystallinity and an obvious core–shell structure. The presence of support maintained the intrinsic photocatalytic activity of Ta{sub 3}N{sub 5} nanoparticles, but it did drastically improve the dispersion of the photocatalysts in the solution. This study proposes the use of an inert support in photocatalytic reactors to improve ease of handling the powder photocatalyst for gas-phase photocatalysis and the suspension of the solution, controlling nature of light harvesting and degree of scattering of the photoreactor.

36 MATERIALS SCIENCE↗

Modeling the long-term evolution of the primary damage in ferritic alloys using coarse-grained methods

Atomic displacement cascades in solids are complex phenomena, the outcome of which can be statistically characterised by properties such as their spatial extent, morphology and the spatial correlation of defects. Some properties scale in a simple way with parameters such as the cascade energy, others have limited variability with energy, for example point defect cluster size distributions. Taking advantage of the latter invariance, we use Object Kinetic Monte Carlo simulations to demonstrate that most properties of displacement cascade play no significant role in the evolution of point defect cluster size distributions after long enough time. It is suggested that reliable long-term predictions are possible, when using only the self-interstitial and vacancy cluster size distributions from low energy displacement cascades as building blocks to represent the complete spectrum of cascade energies obtained under neutron irradiation conditions. This is shown on the basis of recursive properties of displacement cascades evidenced for the first time and taking only approximately into account the average volumes in which vacancies and self-interstitial atoms are confined. The model has been successfully used to simulate the evolution of point defect clusters in iron for displacement rates in the range of 10-6 dpa/s and doses of the order of 0.1 dpa. The applicability beyond this range and to more complex materials is discussed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Effects of Sea Spray on Microphysics and Intensity of Deep Convective Clouds Under Strong Winds

Deep convective clouds similar to those arising in the tropical cyclone eyewall are simulated using a parcel model and 2–D slab symmetric cloud model with spectral bin microphysics (the Hebrew University Cloud Model). The size distribution of sea spray particles (SSPs) at cloud base is calculated using the Lagrangian–Eulerian bin microphysics model. The model describes the SSP production, advection, and formation of the size distribution of SSP in the hurricane atmospheric boundary layer at different strong wind speeds. The SSP distributions calculated by the Lagrangian–Eulerian bin microphysics model are used in the parcel model and the Hebrew University Cloud Model to investigate the microphysical and dynamical effects of SSP on clouds. The SSPs ascending in cloud updrafts dramatically increase the number concentration of cloud drops within a wide range of drop sizes. As a result, sea spray creates clouds with unique property combinations of both maritime and continental types. These clouds have droplet size distributions characterized by a high drop concentration and a low effective radius, as in continental clouds. At the same time, the presence of SSP of a few hundred microns in radii triggers intense rain just above the cloud base, which is typical of extreme maritime clouds. In the presence of large sea spray drops, the smallest cloud condensational nuclei, including the smallest SSP, are activated, giving rise to the permanent in–cloud nucleation of small droplets, which produce a high concentration of small ice crystals above the level of homogeneous freezing. We showed that the SSP substantially increased the maximum vertical velocity, cloud water content, and mass contents of ice particles. Here, the results are compared with available observed data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparison of in situ aerosol measurements with SAGE 2 and SAM 2 aerosol measurements during the airborne Antarctic ozone experiment

Models indicate that stratospheric aerosols play a major role in the destruction of ozone during the Austral winter. Although many in situ measurements of stratospheric aerosols were made during the Airborne Antarctic Ozone Experiment, changes of aerosol concentration and size distributions across the polar vortex are important to understanding changes of chemical species taking place during this time. Therefore comparing the in situ measurements with measurements made by satellites scanning wider areas will give a clearer picture of the possible role played by aerosols during this period. The wire impactor size distributions are compared to those from the aerosol spectrometers and a best fit size distribution determined. Aerosol extinctions are calculated from the in situ measurements and compared to the extinctions measured by the satellites. Five comparisons are made with SAGE 2 and four with SAM 2. Extinctions agree as close as a factor of two.

Ferry, G. V.↗

Note: Evaluation of slurry particle size analyzers for chemical mechanical planarization process

In the chemical mechanical planarization (CMP) process, slurry particle size is important because large particles can cause defects. Hence, selection of an appropriate particle measuring system is necessary in the CMP process. In this study, a scanning mobility particle sizer (SMPS) and dynamic light scattering (DLS) were compared for particle size distribution (PSD) measurements. In addition, the actual particle size and shape were confirmed by transmission electron microscope (TEM) results. SMPS classifies the particle size according to the electrical mobility, and measures the particle concentration (single particle measurement). On the other hand, the DLS measures the particle size distribution by analyzing scattered light from multiple particles (multiple particle measurement). For the slurry particles selected for evaluation, it is observed that SMPS shows bi-modal particle sizes 30 nm and 80 nm, which closely matches with the TEM measurements, whereas DLS shows only single mode distribution in the range of 90 nm to 100 nm and showing incapability of measuring small particles. Hence, SMPS can be a better choice for the evaluation of CMP slurry particle size and concentration measurements.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Explicit Backscattering Coefficient for Ultrasonic Wave Propagating in Hexagonal Polycrystals with Fiber Texture

Hexagonal polycrystalline materials such as titanium, zirconium and magnesium are common in engineering structures like car bodies and airplane engines. These components are usually specially designed in microstructure level to guarantee desired mechanical properties, so microstructure characterization is of great importance to the optimization of manufacturing processes. Compared with traditional destructive characterization methods like scanning electron microscopy (SEM), the ultrasonic approach is nondestructive and cost-effective. Although some progress has been made in ultrasonic microstructure characterization of polycrystal aggregates of hexagonal grains, some factors like macro texture and grain size distribution associated with realistic microstructures were not accounted for yet. Targeting one common texture component for hexagonal polycrystalline materials, {0001} basal fiber texture, this paper derived the explicit backscattering coefficient for aggregates of ellipsoidal grains through one texture parameter and obtained an analytical backscattering coefficient for microstructures with various grain size distributions. In this study, the basal fiber texture was quantified by the 1D Gaussian orientation distribution function (ODF), which merely includes one texture parameter, and its relationship with generalized spherical harmonics ODF was also addressed. Moreover, explicit expressions for effective elastic moduli and elastic constant covariances were derived. Furthermore, some computational examples were given to demonstrate the impacts of texture, frequency, grain geometry and grain size distribution on backscattering behavior. The theoretical results in this study will greatly benefit the later ultrasonic microstructure characterization of hexagonal polycrystalline materials.

42 ENGINEERING↗