Search NASA⌕ Search

SEARCH · Search NASA

Results for “SWITCHES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Laboratory Evaluation and Field Demonstration of High Rotor Switched Reluctance Motor (HRSRM) Technology

In this project, a new motor technology based on a novel design called a High Rotor Pole Switched Reluctance Motor (HRSRM) was demonstrated and evaluated. The HRSRM system combines an innovative electric motor design with a programmable variable-speed drive and a controller that provides real time monitoring and cloud-based connectivity. Unlike induction or permanent-magnet motor designs, this motor uses a switched reluctance (SR) design that purports to be simpler to manufacture and more reliable and efficient to operate. Several of the stated benefits of the HRSRM system were evaluated as part of this project. First, the technology is claimed to offer greater energy efficiency than any motor currently on the market. Second, according to the manufacturer, the motor can be dropped into an existing pump or heating, ventilation, and air-conditioning application in less than 30 minutes, and has controls that can be pre-programmed to interact with the application’s existing control structure. Third, the control system allows the HRSRM to replace a constant-speed motor with one that provides variable-speed capabilities without requiring the installation of a variable-speed drive. The evaluation of a 10 hp HRSRM system was conducted in two parts. One portion of the evaluation consisted of performance tests conducted in a tightly controlled laboratory environment in which the performance of the HRSRM system was compared with that of a premium efficiency induction motor with a variable-frequency drive. The other portion of the evaluation was conducted at a field location within a General Services Administration facility in which the HRSRM system replaced an existing motor system in a 10 hp chilled water pump. The performance of the HRSRM system was compared with that of the incumbent motor system that was supplied with the pump from the manufacturer. The overall project and performance objectives for this motor evaluation are defined in Table ES.1.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Entropy Analysis of FPGA Interconnect and Switch Matrices for Physical Unclonable Functions

Random variations in microelectronic circuit structures represent the source of entropy for physical unclonable functions (PUFs). In this paper, we investigate delay variations that occur through the routing network and switch matrices of a field-programmable gate array (FPGA). The delay variations are isolated from other components of the programmable logic, e.g., look-up tables (LUTs), flip-flops (FFs), etc., using a feature of Xilinx FPGAs called dynamic partial reconfiguration (DPR). A set of partial designs is created to fix the placement of a time-to-digital converter (TDC) and supporting infrastructure to enable the path delays through the target interconnect and switch matrices to be extracted by subtracting out common-mode delay components. Delay variations are analyzed in the different levels of routing resources available within FPGAs, i.e., local routing and across-chip routing. Data are collected from a set of Xilinx Zynq 7010 devices, and a statistical analysis of within-die variations in delay through a set of the randomly-generated and hand-crafted interconnects is presented.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Sub-Nanosecond, Room-Temperature, Mid-IR Fe:ZnSe Gain-Switched Laser: Experimental Characterization and Modeling

We present the modeling and experimental characterization of a room-temperature, sub-nanosecond, gain-switched (GS) Fe:ZnSe laser operating at 4.4–4.8 μm. As pump sources, we used a 2.79 µm Q-switched Cr:Er:YSGG laser with a pulse duration of 52 ns and the 2.98 μm idler of a Nd:YAG pumped KTA-OPO system with a pulse duration of 9 ns. The shortest pulse durations were measured to be 1.4 ns and 0.7 ns under excitation by the Cr:Er:YSGG laser and KTA-OPO system, respectively. The developed Fe:ZnSe laser model showed good agreement with the experimental results. Optimization of the laser parameters based on model simulations suggests that an Fe:ZnSe microchip laser configuration could be achieved with a pulse duration of ~250 ps and an efficiency of ~20%.

Ghimire, Saugat↗
DOE OSTI2016

A deep campaign to characterize the synchronous radio/X-ray mode switching of PSR B0943+10

Observations of PSR B0943+10 with XMM-Newton and the LOFAR, LWA, and Arecibo radio telescopes in 2014 November confirm the synchronous X-ray/radio switching between a radio-bright (B) mode and a radio-quiet (Q) mode, in which the X-ray flux is a factor ∼2.4 higher than in the B-mode. We discovered X-ray pulsations during the B-mode (0.5–2 keV pulsed fraction of (38 ± 5)%) and confirm their presence in the Q-mode, where the pulsed fraction increases with energy from ∼20% to ∼65% at 2 keV. We found marginal evidence for an increase in the X-ray pulsed fraction during the B-mode on a timescale of hours. The X-ray spectrum during the Q-mode requires a fit with either a power law plus blackbody or the sum of two blackbodies, while in the B-mode it is well fit by a single blackbody (a single power law is rejected). In the Q-mode, the pulsed emission has a blackbody spectrum with temperature ∼3.4×10{sup 6} K and the unpulsed emission is a power law with photon index ∼2.5, while during the B-mode both the pulsed and unpulsed emission can be fit by either a blackbody or a power law with similar values of temperature and index. A Chandra image does not show diffuse X-ray emission. These results support a scenario in which unpulsed non-thermal emission, likely magnetospheric, and pulsed thermal emission from a small polar cap (∼1500 m{sup 2}) with a non-dipolar field (∼10{sup 14} G) are present during both modes and vary in a correlated way. This is broadly consistent with the partially screened gap model and does not necessarily imply global magnetospheric rearrangements to explain the mode switching.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2016

Crystal structure of an HIV assembly and maturation switch

Virus assembly and maturation proceed through the programmed operation of molecular switches, which trigger both local and global structural rearrangements to produce infectious particles. HIV-1 contains an assembly and maturation switch that spans the C-terminal domain (CTD) of the capsid (CA) region and the first spacer peptide (SP1) of the precursor structural protein, Gag. The crystal structure of the CTD-SP1 Gag fragment is a goblet-shaped hexamer in which the cup comprises the CTD and an ensuing type II β-turn, and the stem comprises a 6-helix bundle. The β-turn is critical for immature virus assembly and the 6-helix bundle regulates proteolysis during maturation. This bipartite character explains why the SP1 spacer is a critical element of HIV-1 Gag but is not a universal property of retroviruses. Our results also indicate that HIV-1 maturation inhibitors suppress unfolding of the CA-SP1 junction and thereby delay access of the viral protease to its substrate.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1964

Double-throw microwave device switches two lines quickly

By combining a single-throw microwave switch with a microwave circulator in a circuit, two input lines can be switched quickly. There is only a brief transition time when both /or neither/ of the two lines are connected to an output line.

Clauss, R.↗
NASA NTRS1965

Cam-operated limit switch features safe fuse replacement

Two hermetically sealed, short travel, limit switches permit fuse replacement without danger of a spark or arcing. The switches are wired in parallel circuits and actuated by manually operated cams containing the circuit fuses.

Weber, G. J.↗
NASA NTRS1966

Flexible arms provide constant force for pressure switch calibration

In-place calibration of a pressure switch is provided by a system of radially oriented flexing arms which, when rotated at a known velocity, convert the centrifugal force of the arms to a linear force along the shaft. The linear force, when applied to a pressure switch diaphragm, can then be calculated.

Cain, D. E.↗
NASA NTRS1966

Solid state circuit switches ac load

Differential amplifier circuit switches ac signals with peak amplitudes greater than 5 volts. This solid state circuit biases a switching transistor on and off by a 0.1 to 5.0 dc control voltage.

Chapman, C. P.↗
NASA NTRS1966

Design concept for pressure switch calibrator

Calibrator and switch design enables pressure switches to operate under 150 g shock loads. The design employs a saturated liquid-to-vapor phase transition at constant pressure to produce a known force independent of displacement over a usable range.

Slingerland, M. G.↗
NASA NTRS1967

Automatic channel switching device

Automatic channel switching device operates with all three triple modular redundant channels when there are no errors. When a failure occurs, channel and module switching isolate the failure to a specific channel. Since only one must operate correctly, reliability is increased.

Ball, M.↗
NASA NTRS1967

Rugged switch responds to minute pressure differentials

Pressure responsive switching device exhibits high sensitivity but is extremely rugged and resistant to large amplitude shock and velocity loading. This snap-action, single pole-double throw switch operates over a wide temperature range.

Friend, L. C.↗
NASA NTRS1968

Bilateral, Zero-Impedance Static Semiconductor Switch

Static semiconductor switching circuit eliminates the undesirable features of electromechanical relays and conventional semiconductor switching circuits. There is a net zero voltage drop at the terminals and thus a zero impedance for bilateral currents there.

Doughman, C. L.↗
NASA NTRS1968

High conductance vapor thermal switch

High conductance vapor thermal switch was produced to maintain heat dissipating component temperatures within acceptable limits. The switch is a self-actuating, automatic device that regulates the rate of heat flow to control.

Hyman, N. L.↗