Search NASA⌕ Search

SEARCH · Search NASA

Results for “Trigger”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Do cloud-cloud collisions trigger high-mass star formation? I. Small cloud collisions

We performed sub-parsec (∼0.06 pc) scale simulations of two idealized molecular clouds with different masses undergoing a collision. Gas clumps with densities greater than 10{sup –20} g cm{sup –3} (0.3 × 10{sup 4} cm{sup –3}) were identified as pre-stellar cores and tracked throughout the simulation. The colliding system showed a partial gas arc morphology with core formation in the oblique shock front at the collision interface. These characteristics support NANTEN observations of objects suspected to be colliding giant molecular clouds (GMCs). We investigated the effect of turbulence and collision speed on the resulting core population and compared the cumulative mass distribution to cores in observed GMCs. Our results suggest that a faster relative velocity increases the number of cores formed but that cores grow via accretion predominately while in the shock front, leading to a slower shock being more important for core growth. The core masses obey a power-law relation with index γ = –1.6, in good agreement with observations. This suggests that core production through collisions should follow a similar mass distribution as quiescent formation, albeit at a higher mass range. If cores can be supported against collapse during their growth, then the estimated ram pressure from gas infall is of the right order to counter the radiation pressure and form a star of 100 M {sub ☉}.

79 ASTRONOMY AND ASTROPHYSICS↗

Stellar signatures of AGN-jet-triggered star formation

To investigate feedback between relativistic jets emanating from active galactic nuclei and the stellar population of the host galaxy, we analyze the long-term evolution of the orbits of the stars formed in the galaxy-scale simulations by Gaibler et al. of jets in massive, gas-rich galaxies at z ∼ 2-3. We find strong, jet-induced differences in the resulting stellar populations of galaxies that host relativistic jets and galaxies that do not, including correlations in stellar locations, velocities, and ages. Jets are found to generate distributions of increased radial and vertical velocities that persist long enough to effectively augment the stellar structure of the host. The jets cause the formation of bow shocks that move out through the disk, generating rings of star formation within the disk. The bow shock often accelerates pockets of gas in which stars form, yielding populations of stars with significant radial and vertical velocities, some of which have large enough velocities to escape the galaxy. These stellar population signatures can serve to identify past jet activity as well as jet-induced star formation.

79 ASTRONOMY AND ASTROPHYSICS↗

CLOUD–CLOUD COLLISION AS A TRIGGER OF THE HIGH-MASS STAR FORMATION: A MOLECULAR LINE STUDY IN RCW 120

RCW 120 is a Galactic H ii region that has a beautiful ring shape that is bright in the infrared. Our new CO J = 1–0 and J = 3–2 observations performed with the NANTEN2, Mopra, and ASTE telescopes have revealed that two molecular clouds with a velocity separation of 20 km s{sup −1} are both physically associated with RCW 120. The cloud at −8 km s{sup −1} apparently traces the infrared ring, while the other cloud at −28 km s{sup −1} is distributed just outside the opening of the infrared ring, interacting with the H ii region as suggested by the high kinetic temperature of the molecular gas and by the complementary distribution with the ionized gas. A spherically expanding shell driven by the H ii region is usually considered to be the origin of the observed ring structure in RCW 120. Our observations, however, indicate no evidence of the expanding motion in the velocity space, which is inconsistent with the expanding shell model. We postulate an alternative that, by applying the model introduced by Habe and Ohta, the exciting O star in RCW 120 was formed by a collision between the present two clouds at a collision velocity of ∼30 km s{sup −1}. In the model, the observed infrared ring can be interpreted as the cavity created in the larger cloud by the collision, whose inner surface is illuminated by the strong ultraviolet radiation after the birth of the O star. We discuss that the present cloud–cloud collision scenario explains the observed signatures of RCW 120, i.e., its ring morphology, coexistence of the two clouds and their large velocity separation, and absence of the expanding motion.

79 ASTRONOMY AND ASTROPHYSICS↗

GMC COLLISIONS AS TRIGGERS OF STAR FORMATION. I. PARAMETER SPACE EXPLORATION WITH 2D SIMULATIONS

We utilize magnetohydrodynamic (MHD) simulations to develop a numerical model for giant molecular cloud (GMC)–GMC collisions between nearly magnetically critical clouds. The goal is to determine if, and under what circumstances, cloud collisions can cause pre-existing magnetically subcritical clumps to become supercritical and undergo gravitational collapse. We first develop and implement new photodissociation region based heating and cooling functions that span the atomic to molecular transition, creating a multiphase ISM and allowing modeling of non-equilibrium temperature structures. Then in 2D and with ideal MHD, we explore a wide parameter space of magnetic field strength, magnetic field geometry, collision velocity, and impact parameter and compare isolated versus colliding clouds. We find factors of ∼2–3 increase in mean clump density from typical collisions, with strong dependence on collision velocity and magnetic field strength, but ultimately limited by flux-freezing in 2D geometries. For geometries enabling flow along magnetic field lines, greater degrees of collapse are seen. We discuss observational diagnostics of cloud collisions, focussing on {sup 13}CO(J = 2–1), {sup 13}CO(J = 3–2), and {sup 12}CO(J = 8–7) integrated intensity maps and spectra, which we synthesize from our simulation outputs. We find that the ratio of J = 8–7 to lower-J emission is a powerful diagnostic probe of GMC collisions.

79 ASTRONOMY AND ASTROPHYSICS↗

Viscous instability triggered by layered accretion in protoplanetary disks

Layered accretion is one of the inevitable ingredients in protoplanetary disks when disk turbulence is excited by magnetorotational instabilities (MRIs). In the accretion, disk surfaces where MRIs fully operate have a high value of disk accretion rate ( M-dot ), while the disk midplane where MRIs are generally quenched ends up with a low value of M-dot . Significant progress on understanding MRIs has recently been made by a number of dedicated MHD simulations, which requires improvement of the classical treatment of α in 1D disk models. To this end, we obtain a new expression of α by utilizing an empirical formula that is derived from recent MHD simulations of stratified disks with ohmic diffusion. It is interesting that this new formulation can be regarded as a general extension of the classical α. Armed with the new α, we perform a linear stability analysis of protoplanetary disks that undergo layered accretion, and we find that a viscous instability can occur around the outer edge of dead zones. Disks become stable in using the classical α. We identify that the difference arises from Σ-dependence of M-dot ; whereas Σ is uniquely determined for a given value of M-dot in the classical approach, the new approach leads to M-dot that is a multivalued function of Σ. We confirm our finding both by exploring a parameter space and by performing the 1D, viscous evolution of disks. We finally discuss other nonideal MHD effects that are not included in our analysis but may affect our results.

79 ASTRONOMY AND ASTROPHYSICS↗

First use of three-dimensional equilibrium, stability, and transport calculations for interpretation of ELM-triggering with magnetic perturbations in NSTX

The application of non-axisymmetric magnetic perturbations has been demonstrated to destabilize edge-localized modes (ELMs) in the National Spherical Torus Experiment. A model 3D equilibrium has been calculated for these experiments using the VMEC code, which assumes nested flux surfaces and therefore that resonant perturbations are shielded. First, a free-boundary equilibrium is calculated using the NSTX coil set, with pressure and current profiles matched to a standard 2D reconstruction, but with up-down symmetry enforced. A new equilibrium is then calculated with the n = 3 field applied at a level consistent with experiment. This equilibrium is then used as the basis of further calculations using codes developed for analysis of stellarator plasmas. The neoclassical transport due to the 3D fields is calculated to be small compared with the experimental transport rates. Initial stability analysis has been performed, and indicates a modest degradation in ballooning stability with 3D fields applied. A new 3D equilibrium is also calculated using the SIESTA code, which allows for the formation of islands and stochastic regions. A comparison of the field structure between the SIESTA calculation and the assumption of fully penetrated vacuum perturbation indicates smaller island sizes and very small stochastic transport in the SIESTA case.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Real-time observation of toroidal current redistributions induced by three-dimensional MHD phenomena triggering vertical displacement events in tokamak plasmas

Three-dimensional MHD instabilities, including edge-localized modes (ELMs) and internal reconnection events (IREs), have been observed to precipitate loss of vertical stability in tokamak plasmas, resulting in vertical displacement events (VDEs). This vertical destabilization can occur due to toroidal current redistributions and/or shape changes resulting from these phenomena. Using a recently introduced method for rapidly reconstructing the two-dimensional toroidal plasma current density profile in real-time, results are presented that demonstrate the specific current distribution changes that occur during ELMs (on KSTAR) and IREs (on MAST-U) that lead to loss of vertical control. The method most efficiently reconstructs the toroidal current density profile by doing so on a basis of principal components of historical profiles. These principal components isolate dominant current profile dynamics, improving interpretability, increasing speed, and reducing dimensionality of the profile computation. On KSTAR, this computation is executed in the real-time plasma control system at a rate of 10 kHz (limited by available CPU cycle times), allowing the current profile evolution to be assessed at several times over the course of each ELM event. Further, by incorporating the reconstructions into a novel vertical stability metric, the contribution of specific current profile dynamics to the loss of vertical stability can be assessed in real-time for VDE avoidance and improved understanding of the causal relationship between three-dimensional MHD phenomena and VDEs. The success of this method in approximating toroidal current density profiles from kinetic equilibrium reconstructions is also presented ($R^2=0.990$), along with its capability to produce other equilibrium quantities of interest in real-time at high time resolution.

edge-localized modes↗

Self-assembly of wood-based shape memory composites triggered by solar-thermal energy

Transporting and assembling large, complex structures poses significant challenges due to their size, geometry, and cost. Additionally, the installation sites are often inaccessible or hazardous for humans, necessitating self-assembling capabilities in these structures. To mitigate these challenges, we propose using 3D printing materials with shape memory effect (SME) for both transport and construction. This approach involves developing 3D modular components into flat sheets for easier transportation, and then self-assembling into 3D structures on-site using solar energy. To gain a deeper understanding of the factors influencing material memory performance, we have chosen a composite PLA/WF, which is polylactic acid (PLA) with 20 wt% wood flour (WF) for this purpose, leveraging its high tensile modulus at 0.966 GPa, low cost, and sustainability. Printed shapes with this material can maintain a recovery ratio over 90% after 3 cycles. While traditional composites fillers (e.g. glass or carbon fiber) are added to enhance mechanical and thermal properties, the addition of bio-based fillers like WF accomplish similar goals without compromising sustainability. We conducted multiple experiments to demonstrate how environmental conditions (i.e. temperature) maximize the material’s SME. Although still at an early stage, this study provides initial insights into bridging the gap between the small-scale nature of shape memory polymers (SMPs) and their potential for large-scale additive manufacturing, addressing a critical need for efficient and sustainable construction. In the long term, we hope our study contributes to the design vision of utilizing SMPs for transportation, assembly, and deployment of complex structures, providing a new pathway for sustainable construction and transportation of large-scale structures to hard-to-access locations such as disaster-affected areas and remote deserts, etc.

4D printing↗

Gravitational wave signals of electroweak phase transition triggered by dark matter

We study in this work a scenario that the universe undergoes a two step phase transition with the first step happened to the dark matter sector and the second step being the transition between the dark matter and the electroweak vacuums, where the barrier between the two vacuums, that is necessary for a strongly first order electroweak phase transition (EWPT) as required by the electroweak baryogenesis mechanism, arises at the tree-level. We illustrate this idea by working with the standard model (SM) augmented by a scalar singlet dark matter and an extra scalar singlet which mixes with the SM Higgs boson. We study the conditions for such pattern of phase transition to occur and especially for the strongly first order EWPT to take place, as well as its compatibility with the basic requirements of a successful dark matter, such as observed relic density and constraints of direct detections. We further explore the discovery possibility of this pattern EWPT by searching for the gravitational waves generated during this process in spaced based interferometer, by showing a representative benchmark point of the parameter space that the generated gravitational waves fall within the sensitivity of eLISA, DECIGO and BBO.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Do Minor Interactions Trigger Star Formation in Galaxy Pairs?

Abstract We analyze the galaxy pairs in a set of volume limited samples from the Sloan Digital Sky Survey to study the effects of minor interactions on the star formation rate (SFR) and color of galaxies. We carefully design control samples of isolated galaxies by matching the stellar mass and redshift of the minor pairs. The SFR distributions and color distributions in the minor pairs differ from their controls at >99% significance level. We also simultaneously match the control galaxies in stellar mass, redshift and local density to assess the role of the environment. The null hypothesis can be rejected at >99% confidence level even after matching the environment. Our analysis shows a quenching in the minor pairs where the degree of quenching decreases with the increasing pair separation and plateaus beyond 50 kpc. We also prepare a sample of minor pairs with H α line information. We calculate the SFR of these galaxies using the H α line and repeat our analysis. We observe a quenching in the H α sample too. We find that the majority of the minor pairs are quiescent systems that could be quenched due to minor interactions. Combining data from the Galaxy Zoo and Galaxy Zoo 2, we find that only ∼1% galaxies have a dominant bulge, 4%–7% galaxies host a bar and 5%–10% of galaxies show active galactic nucleus (AGN) activity in minor pairs. This indicates that the presence of bulge, bar or AGN activity plays an insignificant role in quenching the galaxies in minor pairs. The more massive companion satisfies the criteria for mass quenching in most of the minor pairs. We propose that the stripping and starvation likely caused the quenching in the less massive companion at a later stage of evolution.

Astronomy & Astrophysics↗

L – H transition trigger physics in ITER-similar plasmas with applied n = 3 magnetic perturbations

In this work, the L – H transition power threshold Ρ LH is observed to increase with applied n = 3 Resonant Magnetic Perturbations (RMP) in ITER-similar-shape (ISS) plasmas with balanced neutral beam torque injection in DIII-D. The increase is most pronounced with added ECH: Ρ LH increases with decreasing edge plasma collisionality as Ρ LH / Ρ LH-08 ~ ( v *) -0.5 , where Ρ LH-08 is the 2008 ITPA multi-machine power threshold scaling. This result raises concerns for H-mode access at low edge collisionality in ITER, where resonant magnetic perturbations (RMP) may have to be applied before the L – H transition to safely suppress the first ELM. Non-axisymmetric modifications with RMP include a simultaneous reduction of the radial electric field ( E r ) well depth and E × B shear. This can be attributed to increasing edge toroidal co-current rotation, and is consistent with substantially increased local long-wavelength turbulence [measured via Beam Emission Spectroscopy (BES)]. At high RMP perturbation strength the edge electric field E r reverses sign locally (becomes positive), with changes in dominant turbulence modes. Edge magnetic stochasticity provides an attractive explanation of the observed modifications, and the observed changes in toroidal rotation and E r are consistent with a simple fluid model describing radial electron current flow along stochastic fieldlines. The observed collisionality dependence of the L-mode edge electric field with applied RMP is also qualitatively consistent with this model. Reflectometry data indicate a significant reduction of the normalized L-mode radial density gradient a/L n at high RMP field with simultaneous increase in radial particle flux and electron thermal flux from power balance analysis. We conjecture that the increase of Ρ LH with RMP results from the combined effects of reduced E × B flow shear (increasing turbulent transport levels) and toroidal/poloidal flow modulation due to edge stochasticity. Initial experiments indicate that non-resonant n = 3 magnetic perturbations lead only to relatively small changes in E r , E × B shear and fluctuation characteristics, and have less impact on the L – H transition power threshold. In conclusion, this motivates further exploration of the RMP spectrum dependence of Ρ LH for possible mitigation of the observed threshold increase.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Triggering of tearing instability by impurity radiation through resistive interchange reversal in a tokamak

Abstract Recent MHD simulations find that the reversal of the local resistive interchange parameter D R from negative to positive due to impurity radiation cooling is able to linearly destabilize the resistive tearing mode (TM) growth in a tokamak above a threshold in impurity level. A layer of perturbed Pfirsch–Schlüter current density and resistivity are also induced by the impurity radiation, which further govern the TM growth and saturation in the nonlinear stage. The impurity threshold and the TM growth strongly depend on the parallel thermal conductivity, and such a dependence derives from the impact on D R of the fast parallel thermal equilibration along the helical magnetic field lines.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modifications of high-p T di-hadron correlations for identified triggers

Angular correlations with high transverse momentum hadrons have become an established tool for studying properties of the medium created in ultra-relativistic heavy ion collisions. When investigated in two dimensions, relative azimuth and relative pseudorapidity, the small-angle part of such correlations is commonly attributed to QCD jets, while long-range correlations, specifically ridge observed at low- and intermediate momentum, are often described as manifestations of hydrodynamic expansion of the system, e.g. flow. Comparative analysis of both features, presented in this work for correlations with identified leading hadrons, explores the particle type dependence of the jet structures, and challenges the flow-only hypotheses behind the ridge.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Readout and trigger for the AFP detector at ATLAS experiment

AFP, the ATLAS Forward Proton consists of silicon detectors at 205 m and 217 m on each side of ATLAS. In 2016 two detectors in one side were installed. The FEI4 chips are read at 160 Mbps over the optical fibers. The DAQ system uses a FPGA board with Artix chip and a mezzanine card with RCE data processing module based on a Zynq chip with ARM processor running ArchLinux. Finally, in this paper we give an overview of the AFP detector with the commissioning steps taken to integrate with the ATLAS TDAQ. Furthermore first performance results are presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗