Search NASA⌕ Search

SEARCH · Search NASA

Results for “ULTRAVIOLET SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Roles of oxidizing species in a nonequilibrium atmospheric-pressure pulsed remote O{sub 2}/N{sub 2} plasma glass cleaning process

Atmospheric pressure plasma treatments have attracted attention for various application processes. The effect of O{sub 2} additions below 0.2% to N{sub 2} was investigated for the efficiency of removing organic contaminants on a glass surface using nonequilibrium atmospheric-pressure pulsed plasma. A remarkably high efficiency of cleaning was obtained by a plasma treatment with ca. 0.03% O{sub 2} additions to N{sub 2}. The concentration of ozone (O{sub 3}) and the ground-state oxygen radical [O({sup 3}P{sub 2})] were measured using ultraviolet absorption spectroscopy and vacuum ultraviolet laser absorption spectroscopy, respectively. It was found that the key factors for surface cleaning were the scission of carbon bonds due to ultraviolet irradiation and subsequent oxidation due to O({sup 3}P), and that the surface cleaning proceeded in broad areas due to the photodissociation of O{sub 3}.

36 MATERIALS SCIENCE↗

Synthesis of monosized magnetic-optical AuFe alloy nanoparticles

We report the preparation and characterization of multifunctional AuFe alloy nanoparticles of three compositions, Au{sub 0.25}Fe{sub 0.75}, Au{sub 0.5}Fe{sub 0.5}, and Au{sub 0.75}Fe{sub 0.25}, by a polyol process. It is found that the fusion of the two elements into one nanostructure entity retains the optical and magnetic properties of the individual components. The x-ray diffraction and transmission electron microscopy analyses confirm the formation of the alloy nanostructure with a narrow distribution of particle sizes and provides the detailed structural arrangements. The magnetic investigation shows the superparamagnetic or soft ferromagnetic behavior of the nanoparticles at room temperature, whereas the UV-visible measurements display the variation of the absorption bands at {approx}560 nm. The AuFe nanoparticles are rendered water soluble after thiolation.

36 MATERIALS SCIENCE↗

Bandgap engineering in amorphous Be{sub x}Zn{sub y}O thin films

Reactive sputtering was used to grow thin films of Be{sub x}Zn{sub y}O on Si (100) substrates. X-ray diffraction patterns of the films revealed no structure, suggesting that the films have an amorphous nature. The optical ''bandgap'' energy of the amorphous Be{sub x}Zn{sub y}O (a-Be{sub x}Zn{sub y}O) films was derived from vacuum ultraviolet variable angle spectroscopic ellipsometry measurements. The value of the energy bandgap of the films can be efficiently engineered to vary from the amorphous ZnO bandgap of 3.35 to 7.91 eV by changing the Be doping level in the a-BeZnO. The a-BeZnO films could be used for fabricating excellent a-ZnO based electronic devices.

36 MATERIALS SCIENCE↗

Crystal and defect chemistry influences on band gap trends in alkaline earth perovskites

A number of perovskites with A-site alkaline earth chemistries being Ca, Sr, and Ba, and tetravalent cations including Ce, Zr, and Ti are measured for optical band gap and found to vary systematically with tolerance factor and lattice volume within limits defined by the chemistry of the octahedral site. This paper also focuses on the BaTiO{sub 3} system, considering equilibrated nonstoichiometries, and determines the changes in band gap with respect to Ba/Ti ratios. It was found that the optical band gap changes in the solid solution regime and is invariant in the second phase regions, as would be expected. In the cases of Ba/Ti<1.0, the variation in band gap scales with lattice volume, but in the Ba/Ti>1.0 stoichiometries, there is a distinct Urbach tail and the trend with lattice volume no longer holds. It is inferred that the V{sub Ti}{sup q}prime-2V{sub O} partial Schottky complex controls the band gap trend with Ba-rich nonstoichiometries.

36 MATERIALS SCIENCE↗

Formation of self-affine nanostructures on ZnO surfaces by swift heavy ions

The topography evolution using the high energy heavy ion irradiation revealed the fact that ion bombardment produces self-affine nanostructures, creating peculiar surface morphologies and regular structures on the surface of the ZnO thin film at certain fluences. The self-affine nanopatterns produced on the surface of ZnO thin film under swift heavy ion irradiation are different types of nanostructures such as nanodimensional grains aligned like a linear array. Scanning probe microscopy is used for investigating the ZnO surfaces and UV-visible spectroscopy for studying the effect of surface modification on optical properties. The two-dimensional power spectral density of the irradiated ZnO thin films have been evaluated for each image to extract the value of growth factor ({beta}) and roughness exponent ({alpha}). The exponent n increases from 2.2 to 4.0 up to a critical value of fluence and beyond which it decreases. These values suggest that ion assisted/induced diffusion process plays a crucial role in the evolution of self-affine nanostructures on ZnO surface.

36 MATERIALS SCIENCE↗

Defect-induced states in the electronic structure of a Cu(100)-benzenethiolate-pentacene heterostructure

We report on the influence of defects in the electronic properties of a pentacene single-layer grown on a benzenethiolate self-assembled-monolayer (Bt-SAM) adsorbed on Cu(100) at 300 K, using high-resolution ultraviolet photoelectron spectroscopy. The weak interaction between pentacene and the underlying Bt-SAM is deduced by the lineshape and evolution of the highest-occupied molecular orbital (HOMO). Closer inspection of the pentacene HOMO band reveals a skewed feature, where the contribution in the low binding energy side is found originating from states associated to structural defects that can be reduced by controlled mild-temperature annealing (355 K). Presence of such defects influences also the pentacene HOMO onset energy and hole-injection barrier that can be reduced to typical value of this organic heterostructure after the annealing.

36 MATERIALS SCIENCE↗

Shape dependence of nonlinear optical behaviors of nanostructured silver and their silica gel glass composites

Nanostructured Ag in shapes of nanoplate, nanowire, and nanoparticle, as well as their silica gel glass composites have been prepared and characterized. Nonlinear optical (NLO) properties were measured at 532 and 1064 nm using open aperture z-scan technique and studied from the view of shape effect. NLO behaviors of the nanostructured Ag are found to be shape dependent in suspensions at both the investigated wavelengths, although they originate differently. Comparing to the mother suspensions, the Ag/silica gel glass nanocomposites present rather dissimilar NLO behaviors, which is quite interesting for further studies.

36 MATERIALS SCIENCE↗

Photodiode characteristics and band alignment parameters of epitaxial Al{sub 0.5}Ga{sub 0.5}P

Wide-bandgap semiconductor Al{sub x}Ga{sub 1-x}P is a promising material candidate for low-noise photodiodes in blue/UV spectrum. Photodiodes were fabricated on Al{sub 0.5}Ga{sub 0.5}P epitaxial layer grown lattice matched on GaP substrate by molecular beam epitaxy. Although quantum efficiency is low for standard p-i-n photodiode due to inadvertent photon absorption in the top p-layer, it can be significantly improved by opening a recessed window in the top p-layer or by using a Schottky junction photodiode structure. Al{sub 0.5}Ga{sub 0.5}P band alignment parameters can be extrapolated from the current-voltage characteristics of Al{sub 0.5}Ga{sub 0.5}P Schottky junctions. The bandgap of Al{sub 0.5}Ga{sub 0.5}P was measured to be 2.38 eV.

36 MATERIALS SCIENCE↗

Enhanced growth of high quality single crystal diamond by microwave plasma assisted chemical vapor deposition at high gas pressures

Single crystals of diamond up to 18 mm in thickness have been grown by microwave plasma assisted chemical vapor deposition at gas pressures of up to 350 torr. Growth rates of up to 165 {mu}m/h at 300 torr at high power density have been achieved. The processes were evaluated by optical emission spectroscopy. The high-quality single-crystal diamond grown at optimized conditions was characterized by UV-visible absorption and photoluminescence spectroscopy. The measurements reveal a direct relationship between residual absorption and nitrogen content in the gas chemistry. Fabrication of high quality single-crystal diamond at higher growth rates should be possible with improved reactor design that allows still higher gas synthesis pressures.

36 MATERIALS SCIENCE↗

Validating optical emission spectroscopy as a diagnostic of microwave activated CH{sub 4}/Ar/H{sub 2} plasmas used for diamond chemical vapor deposition

Spatially resolved optical emission spectroscopy (OES) has been used to investigate the gas phase chemistry and composition in a microwave activated CH{sub 4}/Ar/H{sub 2} plasma operating at moderate power densities ({approx}30 W cm{sup -3}) and pressures ({<=}175 Torr) during chemical vapor deposition of polycrystalline diamond. Several tracer species are monitored in order to gain information about the plasma. Relative concentrations of ground state H (n=1) atoms have been determined by actinometry, and the validity of this method have been demonstrated for the present experimental conditions. Electronically excited H (n=3 and 4) atoms, Ar (4p) atoms, and C{sub 2} and CH radicals have been studied also, by monitoring their emissions as functions of process parameters (Ar and CH{sub 4} flow rates, input power, and pressure) and of distance above the substrate. These various species exhibit distinctive behaviors, reflecting their different formation mechanisms. Relative trends identified by OES are found to be in very good agreement with those revealed by complementary absolute absorption measurements (using cavity ring down spectroscopy) and with the results of complementary two-dimensional modeling of the plasma chemistry prevailing within this reactor.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Experimental study of impurity screening in the edge ergodic layer of the Large Helical Device using carbon emissions of CIII to CVI

Four resonance transitions of CIII (977.03 A:2s{sup 2} {sup 1}S{sub 0}-2s2p {sup 1}P{sub 1}), CIV (1550 A:2s {sup 2}S-2p {sup 2}P), CV (40.27 A:1s{sup 2} {sup 1}S{sub 0}-1s2p {sup 1}P{sub 1}), and CVI (33.73 A:1s {sup 2}S-2p {sup 2}P) have been observed in vacuum ultraviolet and extreme ultraviolet regions to study the edge carbon impurity transport in the Large Helical Device ergodic layer. Here, CIII and CIV indicate the carbon influx at the outside boundary of the ergodic layer and CV and CVI indicate the ions in higher ionization stages, which have already experienced the transport in the ergodic layer. The intensity ratio of CV+CVI to CIII+CIV, therefore, represents the degree of impurity screening, which has been analyzed with different edge plasma parameters and ergodic magnetic field structures. The ratio decreases by two orders of magnitude with an increase in electron density n{sub e} in the range of 1-8x10{sup 19} m{sup -3}. The CV and CVI emissions tend to decrease with n{sub e}, whereas the CIII and CIV emissions monotonically increase with n{sub e}. The result suggests an enhancement of the impurity screening in the higher n{sub e} range due to the increasing ion-impurity collision frequency ({nu}{sub {zeta}}{sub i}{identical_to}1/{tau}{sub s}=3.4x10{sup 4} s{sup -1} at n{sub e}=2x10{sup 19} m{sup -3} and 1.0x10{sup 5} s{sup -1} at 6x10{sup 19} m{sup -3} for CV). The friction force parallel to the magnetic fields plays an important role in the edge impurity transport within the ergodic layer. When the ergodic layer structure is thicker, the ratio systematically decreases mainly due to a reduction in CV+CVI emissions. The ratio is also studied by changing the radial position of an externally supplied m/n=1/1 island. When the island is positioned in the ergodic layer, the ratio indicates a remarkable change, i.e., reduction in CV+CVI and increase in CIII+CIV. These experiments demonstrate that the modification of the ergodic magnetic field structure makes a clear change to the edge impurity transport. When the background ion species is changed from hydrogen to helium, the ratio is clearly reduced, at least at n{sub e}{<=}4x10{sup 19} m{sup -3}, suggesting the enhancement of the impurity screening effect due to the increased collisionality. Finally, the experimental result is simulated using three-dimensional edge transport code of EMC3-EIRENE. The density dependence of the carbon ratio can be well reproduced with a simulation code suggesting that impurity screening is induced in the ergodic magnetic field layer.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Formation of ultrafine uniform gold nanoparticles by sputtering and redeposition

Uniformly distributed Au nanoparticles with controllable size were fabricated by focused ion beam bombardment of thin gold films. In situ scanning electron microscopy and ex situ transmission electron microscopy were used to characterize the nanoparticles. Results show that a dual particle size distribution was generated at low ion fluence, while highly uniform Au particles with diameters around 2 nm formed at high fluence. The balance between sputtering and redeposition is responsible for the formation and size control of the nanoparticles. Optical absorption measurement revealed strong size dependant resonances that are attributed to the surface plasmon resonance of the Au particles.

36 MATERIALS SCIENCE↗

Effect of thermal annealing on charge exchange between oxygen interstitial defects within HfO{sub 2} and oxygen-deficient silicon centers within the SiO{sub 2}/Si interface

We compare the charging response of rapid thermally annealed (800 and 1000 deg. C) 4 nm thick HfO{sub 2} to as-deposited HfO{sub 2} on Si by measuring the surface potential of the HfO{sub 2} layers after vacuum ultraviolet (VUV) irradiation with 11.6 eV photons. From VUV spectroscopy, we determined all HfO{sub 2} layers show the presence of oxygen-interstitial defects (OIDs). The electronic states of OID in HfO{sub 2} line up in energy with oxygen-deficient Si centers within the SiO{sub 2} interfacial layer. This implies charge exchange between OIDs within HfO{sub 2} and the O-deficient silicon centers within the SiO{sub 2} interfacial layer are very important for controlling the radiation-induced trapped charge in HfO{sub 2} dielectric stacks.

36 MATERIALS SCIENCE↗

Band structure design and photocatalytic activity of In{sub 2}O{sub 3}/N-InNbO{sub 4} composite

In this study, the band structure of In{sub 2}O{sub 3}/N-InNbO{sub 4} composite was considered to be advantageous for the transportation and separation of photoexcited electron/hole pairs. This composite was synthesized and characterized by powder x-ray diffraction, UV-visible diffuse reflectance spectroscopy, transmission electron microscope, and x-ray photoelectrons spectroscopy. The photocatalytic experiments indicated the H{sub 2} evolution rate of In{sub 2}O{sub 3}/N-InNbO{sub 4} composite was 27.3 {mu}mol h{sup -1} g{sup -1} under visible light irradiation ({lambda}>420 nm), which was 18.6 times the rate of In{sub 2}O{sub 3} and 2.3 times the rate of N-InNbO{sub 4}.

36 MATERIALS SCIENCE↗

Charge exchange recombination detection of low-Z and medium-Z impurities in the extreme UV using a digital lock-in technique

More sensitive detection of charge exchange recombination lines from low-Z elements, and first-time detection from the medium-Z elements nickel and copper, has been achieved in DIII-D plasmas with a digital lock-in technique. That portion of the extreme UV spectrum varying synchronously in time with the square-wave modulation of a high energy, neutral heating beam is extracted by forming a scalar product of a correlation function with the data record of each pixel in the linear array detector. The usual, dense array of collisionally excited, metallic lines from the tokamak plasma is strongly suppressed, leaving only a sparse spectrum of lines dominated by charge exchange recombination transitions from fully stripped, low-Z elements. In plasmas with high metal content, charge exchange recombination lines from the Li-like ions of nickel and copper have been positively identified.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The cathode-fall of low-pressure hydrogen discharges: Absolute spectral emission and model

Absolute excitation probabilities from very low to moderate-current hydrogen discharges in parallel-plane geometry are measured and used to test models. Relative emission data are obtained for the H{sub {alpha}} line, the H{sub 2} (a{sup 3}{Sigma}{yields}b{sup 3}{Pi}) near-UV continuum, and the H{sub 2} (G{sup 1}{Sigma}{yields}B{sup 1}{Pi}{sub u}{sup +}) band at pressures of 0.5 and 2 Torr, a 1.05 cm gap, and voltages from 300 to 900 V. Electron behavior is traced using the first negative (A{sup 2}{Sigma}{sub g}{yields} X{sup 2}{Pi}{sub u}, {nu}'' = 0 {yields}{nu}' = 0) band of N{sub 2}{sup +} by adding 2% N{sub 2}. Relative measurements of H{sub {alpha}}, H{sub 2} near-UV, and N{sub 2} 1st negative emission are placed on a absolute scale by normalization to published measurements and Boltzmann calculations of electron excitation. Emission probabilities calculated using a multi-beam kinetics model for the electrons, H{sup +}, H{sub 2}{sup +}, H{sub 3}{sup +}, H{sup -}, H, and H{sub 2} are compared with the calibrated experiments. Fast H atoms are calculated to produce H{sub {alpha}} excitation that is comparable with that of electrons. The calculated emission intensities for H{sub {alpha}} and H{sub 2} near-UV continuum are within a factor of three of the absolute measurements for a range of 5000:1 in current and 4:1 in hydrogen pressure. Calculations at 2 Torr show that most of the space charge electric field responsible for the cathode fall is produced by H{sub 3}{sup +} ions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Lyman-{alpha} radiation of a metastable hydrogen beam to measure electric fields

The interaction between a metastable H(2s) atomic hydrogen beam and an external electric field leads to the emission of the Lyman-{alpha} line. It originates in the Stark mixing of the near-degenerate 2s{sub 1/2} and 2p{sub 1/2} levels separated by the Lamb shift. The quenched radiation proportional to the square of the electric field amplitude is recovered in vacuum by using such an atomic probe beam. We observe the strong enhancement of the signal when the field is oscillating at the Lamb shift frequency. This technique is applied in a plasma, offering an alternative way to measure weak electric fields by direct and non-intrusive means.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Photoinduced variable stiffness of spiropyran-based composites

A quantitative demonstration of reversible stiffness upon appropriate light stimulus in a spiropyran-polymeric composite is presented. The polymeric films containing 3% wt. of the photochromic spiropyran were irradiated with alternating ultraviolet and visible light and the storage modulus was measured. A reversible change in modulus of about 7% was observed. The modulus change was attributed to an interaction of the polar merocyanine with the polymeric chains and/or to a variation of effective free volume induced by merocyanine aggregates formed in the polymer upon ultraviolet irradiation. The effect is fully reversed when the merocyanine isomers turn back to the spiropyran state after visible irradiation.

36 MATERIALS SCIENCE↗