Search NASA⌕ Search

SEARCH · Search NASA

Results for “Writing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Massive celestial fermions

In an effort to further the study of amplitudes in the celestial CFT (CCFT), we construct conformal primary wavefunctions for massive fermions. Upon explicitly calculating the wavefunctions for Dirac fermions, we deduce the corresponding transformation of momentum space amplitudes to celestial amplitudes. The shadow wavefunctions are shown to have opposite spin and conformal dimension 2 - Δ. The Dirac conformal primary wave- functions are delta function normalizable with respect to the Dirac inner product provided they lie on the principal series with conformal dimension Δ = 1 + iλ for λ ∈ $\mathbb{R}$. It is shown that there are two choices of a complete basis: single spin J=$\frac{1}{2}$ or J=-$\frac{1}{2}$ and λ ∈ $\mathbb{R}$ or multiple spin J=±$\frac{1}{2}$ and λ $\mathbb{R}$ +∪0 . The massless limit of the Dirac conformal primary wavefunctions is shown to agree with previous literature. The momentum generators on the celestial sphere are derived and, along with the Lorentz generators, form a representation of the Poincaré algebra. Finally, we show that the massive spin-1 conformal primary wavefunctions can be constructed from the Dirac conformal primary wavefunctions using the standard Clebsch-Gordan coefficients. We use this procedure to write the massive spin-$\frac{3}{2}$, Rarita-Schwinger, conformal primary wavefunctions. This provides a prescription for constructing all massive fermionic and bosonic conformal primary wavefunctions starting from spin-$\frac{1}{2}$.

79 ASTRONOMY AND ASTROPHYSICS↗

Application of the AMPLATZER Vascular Plug in Endovascular Occlusion of Dialysis Accesses

The purpose of this study was to share our initial experience with the AMPLATZER Vascular Plug (AVP) in occluding dialysis accesses. Between January 2007 and October 2008, five patients with autogenous and one patient with prosthetic accesses were referred for endovascular occlusion owing to central venous obstruction (n = 4) and dialysis-associated steal syndrome (n = 2) leading to disabling complications. We used a single AVP in two patients, double AVPs in two patients, and double AVPs and n-butyl 2-cyanoacrylate in one patient with an autogenous access. Two coils were deployed between two AVPs to occlude the prosthetic graft. Immediate success was achieved in all patients, with no complications. Mean follow-up time was 13 months (range, 1-21 months) and none of the patients had experienced symptom recurrence as of the time of writing. The AVP allows simple, precise, and reliable dialysis access occlusion without significant complications when surgical ligation is not preferred. It can be used with other embolizing agents to provide occlusion in the case of failure.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

3D printing of void-free glass monoliths: rheological and geometric considerations

Direct ink writing (DIW) is a versatile additive manufacturing technique capable of printing 3D architectures from a broad range of materials. The key advantage of DIW is the ability to spatially control both the architecture and the composition of the printed part, which enables the production of components with previously unachievable combinations of functionalities. One emergent application space for DIW has been in additively manufactured glass optics, where a “green body” is patterned layer-by-layer by extruding a silica-based slurry through a microfluidic nozzle and then thermally consolidated to transparent glass. A critical aspect of the process is ensuring that the printed part is completely free of voids that can occur in the interstitial spaces between the extruded filaments. This outcome is governed by the interplay between ink rheology and strains imposed by the printing process and geometric packing of the filaments. Here, we explore the strain- and rate-dependent deformation events in the DIW process to determine conditions that enable the printing of void-free monoliths without sacrificing shape fidelity. We focus on yield stress fluids consisting of fumed silica nanoparticles dispersed in organic solvents at varied volume fractions to control the rheological properties. We investigate the printability of these ink materials as a function of print process variables and devise the appropriate dimensionless parameters that capture the geometry-dependent and rate-dependent effects on the deformation of the extruded ink. Lastly, we use these scaling arguments to construct a phase diagram for void-free monolith printability.

36 MATERIALS SCIENCE↗

Virtuality Distributions and γγ * -> π 0 Transition at Handbag Level

We outline a new approach to transverse momentum dependence in hard processes using as an example the exclusive transition ${\gamma^{*}\gamma \to \pi^{0}}$ at the handbag level. We start with the coordinate representation for a matrix element ${\langle p |{\cal O}(0,z) |0 \rangle}$ of a bilocal operator ${{\cal O} (0,z)}$ describing a hadron with momentum p. Treated as a function of (pz) and z$^{2}$, it is parametrized through virtuality distribution amplitude (VDA) Φ (x, σ), with x being Fourier-conjugate to (pz) and σ Laplace-conjugate to z$^{2}$. For intervals with z$^{+}$ = 0, we introduce the transverse momentum distribution amplitude (TMDA) ${\Ψ (x,k_{\perp})}$ , and write it in terms of VDA Φ (x, σ). The results of covariant calculations, written in terms of Φ (x, σ) are converted into expressions involving ${\Ψ (x,k_{\perp})}$ . We propose simple models for soft VDAs/TMDAs, and use them for comparison of handbag results with experimental (BaBar and BELLE) data on the pion transition form factor.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DIRAQ: scalable in situ data- and resource-aware indexing for optimized query performance

Scientific data analytics in high-performance computing environments has been evolving along with the advancement of computing capabilities. With the onset of exascale computing, the increasing gap between compute performance and I/O bandwidth has rendered the traditional post-simulation processing a tedious process. Despite the challenges due to increased data production, there exists an opportunity to benefit from "cheap" computing power to perform query-driven exploration and visualization during simulation time. To accelerate such analyses, applications traditionally augment, post-simulation, raw data with large indexes, which are then repeatedly utilized for data exploration. However, the generation of current state-of-the-art indexes involves a compute- and memory-intensive processing, thus rendering them inapplicable in an in situ context. In this paper we propose DIRAQ, a parallel in situ, in network data encoding and reorganization technique that enables the transformation of simulation output into a query-efficient form, with negligible runtime overhead to the simulation run. DIRAQ's effective core-local, precision-based encoding approach incorporates an embedded compressed index that is 3---6 $$\times $$ ? smaller than current state-of-the-art indexing schemes. Its data-aware index adjustmentation improves performance of group-level index layout creation by up to 35 % and reduces the size of the generated index by up to 27 %. Moreover, DIRAQ's in network index merging strategy enables the creation of aggregated indexes that speed up spatial-context query responses by up to $$10\times $$ 10 ? versus alternative techniques. DIRAQ's topology-, data-, and memory-aware aggregation strategy results in efficient I/O and yields overall end-to-end encoding and I/O time that is less than that required to write the raw data with MPI collective I/O.

Computer Science↗

Solving Stochastic Dynamic Programming Problems: A Mixed Complementarity Approach

We detail a mixed complementarity problem (MCP) formulation of continuous state dynamic programming problems (DP-MCP). We write the solution to projection methods in value function iteration (VFI) as a joint set of optimality conditions that characterize maximization of the Bellman equation; and approximation of the value function. The MCP approach replaces the iterative component of projection based VFI with a one-shot solution to a square system of complementary conditions. We provide three numerical examples to illustrate our approach.

97 MATHEMATICS AND COMPUTING↗

Performance analysis of data intensive cloud systems based on data management and replication: a survey

As we delve deeper into the ‘Digital Age’, we witness an explosive growth in the volume, velocity, and variety of the data available on the Internet. For example, in 2012 about 2.5 quintillion bytes of data was created on a daily basis that originated from myriad of sources and applications including mobiledevices, sensors, individual archives, social networks, Internet of Things, enterprises, cameras, software logs, etc. Such ‘Data Explosions’ has led to one of the most challenging research issues of the current Information and Communication Technology era: how to optimally manage (e.g., store, replicated, filter, and the like) such large amount of data and identify new ways to analyze large amounts of data for unlocking information. It is clear that such large data streams cannot be managed by setting up on-premises enterprise database systems as it leads to a large up-front cost in buying and administering the hardware and software systems. Therefore, next generation data management systems must be deployed on cloud. The cloud computing paradigm provides scalable and elastic resources, such as data and services accessible over the Internet Every Cloud Service Provider must assure that data is efficiently processed and distributed in a way that does not compromise end-users’ Quality of Service (QoS) in terms of data availability, data search delay, data analysis delay, and the like. In the aforementioned perspective, data replication is used in the cloud for improving the performance (e.g., read and write delay) of applications that access data. Through replication a data intensive application or system can achieve high availability, better fault tolerance, and data recovery. In this paper, we survey data management and replication approaches (from 2007 to 2011) that are developed by both industrial and research communities. The focus of the survey is to discuss and characterize the existing approaches of data replication and management that tackle the resource usage and QoS provisioning with different levels of efficiencies. Moreover, the breakdown of both influential expressions (data replication and management) to provide different QoS attributes is deliberated. Furthermore, the performance advantages and disadvantages of data replication and management approaches in the cloud computing environments are analyzed. Open issues and future challenges related to data consistency, scalability, load balancing, processing and placement are also reported.

Malik, Saif Ur Rehman↗

All-aerosol-jet-printed highly sensitive and selective polyaniline-based ammonia sensors: a route toward low-cost, low-power gas detection

In this work, we report the design and scalable fabrication of a low-cost and low-power polyaniline-based (PANI) ammonia (NH3) gas sensor on polyimide (PI) substrates using additive manufacturing techniques. The silver interdigitated electrode (IDE) arrays and conducting polymer films are printed onto PI using a direct-write technology of aerosol-jet printing. Morphological characteristics are examined by scanning electron microscopy and energy-dispersive X-ray analysis which reveal homogeneously printed PANI film on the IDE platform. The gas sensing performance is evaluated in the analytical early leak detection range of 5–1000 ppm NH3 in air as a function of both thermal (23 °C, 50 °C, 80 °C) and relative humidity (RH = 0%, 30%, 50%) exposures. The sensor exhibits sensitivity down to 5 ppm NH3 with a sub-ppm detection limit and good repeatability. We observe rapid NH3 detection at 0% RH with very extended times for equilibration and recovery. However, at both 30 and 50% RH, the room temperature response and recovery times are reduced to only about 1 min and 5 min, respectively. Experiments also reveal good sensitivity toward the analyte even at higher operating temperatures. Present results merit the practical application of aerosol-jet-printed, low-power sensors for industrial applications where low-level hazardous gas detection is essential.

36 MATERIALS SCIENCE↗

A High-Order Eulerian–Lagrangian Runge–Kutta Finite Volume (EL–RK–FV) Method for Scalar Nonlinear Conservation Laws

Abstract We present a class of high-order Eulerian–Lagrangian Runge–Kutta finite volume methods that can numerically solve Burgers’ equation with shock formations, which could be extended to general scalar conservation laws. Eulerian–Lagrangian (EL) and semi-Lagrangian (SL) methods have recently seen increased development and have become a staple for allowing large time-stepping sizes. Yet, maintaining relatively large time-stepping sizes post shock formation remains quite challenging. Our proposed scheme integrates the partial differential equation on a space-time region partitioned by linear approximations to the characteristics determined by the Rankine–Hugoniot jump condition. We trace the characteristics forward in time and present a merging procedure for the mesh cells to handle intersecting characteristics due to shocks. Following this partitioning, we write the equation in a time-differential form and evolve with Runge–Kutta methods in a method-of-lines fashion. High-resolution methods such as ENO and WENO-AO schemes are used for spatial reconstruction. Extension to higher dimensions is done via dimensional splitting. Numerical experiments demonstrate our scheme’s high-order accuracy and ability to sharply capture post-shock solutions with large time-stepping sizes.

Chen, Jiajie↗

Comparison of MCNP and Experimental Measurements for an HPGe-based Spectroscopy Portal Monitor.

The necessity to monitor international commercial transportation for illicit nuclear materials resulted in the installation of many nuclear radiation detection systems in Portal Monitors. These were mainly gross counters which alarmed at any indication of high radioactivity in the shipment, the vehicle or even the driver. The innocent alarm rate, due to legal shipments of sources and NORM, or medical isotopes in patients, caused interruptions and delays in commerce while the legality of the shipment was verified. To overcome this difficulty, Department of Homeland Security (DHS) supported the writing of the ANSI N42.38 standard (Performance Criteria for Spectroscopy-Based Portal Monitors used for Homeland Security) to define the performance of a Portal Monitor with nuclide identification capabilities, called a Spectroscopy Portal Monitor. This standard defines detection levels and response characteristics for the system for energies from 25 keV to3. MeV. To accomplish the necessary performance, several different HPGe detector configurations were modeled using MCNP for the horizontal field of view (FOV) and vertical linearity of response over the detection zone of 5 meters by 4.5 meters for 661 keV as representative of the expected nuclides of interest. The configuration with the best result was built and tested. The results for the FOV as a function of energy and the linearity show good agreement with the model and performance exceeding the requirements of N42.38.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Emergence of the polydeterminant in QCD

A generalization of the determinant appears in particle physics in effective Lagrangian interaction terms that model the chiral anomaly in quantum chromodynamics (Giacosa et al. in Phys Rev D 97(9):091901, 2018, Phys Rev D 109(7):L071502, 2024), in particular in connection to mesons. This polydeterminant function, known in the mathematical literature as a mixed discriminant, associates N distinct N x N complex matrices into a complex number and reduces to the usual determinant when all matrices are taken as equal. Here, we explore the main properties of the polydeterminant applied to (quantum) fields by using a formalism and a language close to high-energy physics approaches. We discuss its use as a tool to write down novel chiral anomalous Lagrangian terms and present an explicit illustrative model for mesons. Finally, the extension of the polydeterminant as a function of tensors is shown.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Physical similarity of the processes of laser thermochemical recording on thin metal films and modeling the recording of submicron structures

Laser thermochemical recording is a flexible method for direct writing the binary planar structures (for instance, diffractive optical elements) by a local laser-induced oxidation of thin metal films. Unfortunately, due to excess of influencing parameters, search for regimes of high-resoluted recording could be complicated. The presented article proposes the way to analyze the hard-to-reach regimes of laser recording by modeling them with more convenient regimes (with different geometric and/or thermochemical parameters) based on their physical similarity.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

CO{sub 2} laser-induced micro-plume treatment of silicon: technique and application

A method for treating the surface of crystalline silicon (α-Si) covered with a fused silica (SiO{sub 2}) plate by a laser-induced plume arising from the absorption of CO{sub 2} laser radiation in glass is presented. The mechanism of micro-plume formation and the effect of this micro-plume on α-Si sample are considered. The α-Si processing regimes were determined that relate the depth of the formed relief to the radiation power density, the temperature of the micro-plume formed during SiO{sub 2} irradiation was measured and reached 3000 K. The diffraction phase gratings were designed, manufactured on silicon, and tested, they successfully split 10.6 μm laser beam at 0 and ± 1 diffraction orders. The method belongs to the group of direct writing methods and is easily adapted to different types of diffraction elements on the surface of Si and other materials transparent to 10 μm irradiation.

36 MATERIALS SCIENCE↗

HybridPlan: A Capacity Planning Technique for Projecting Storage Requirements in Hybrid Storage Systems

Economic forces, driven by the desire to introduce flash into the high-end storage market without changing existing software-base, have resulted in the emergence of solid-state drives (SSDs), flash packaged in HDD form factors and capable of working with device drivers and I/O buses designed for HDDs. Unlike the use of DRAM for caching or buffering, however, certain idiosyncrasies of NAND Flash-based solid-state drives (SSDs) make their integration into hard disk drive (HDD)-based storage systems nontrivial. Flash memory suffers from limits on its reliability, is an order of magnitude more expensive than the magnetic hard disk drives (HDDs), and can sometimes be as slow as the HDD (due to excessive garbage collection (GC) induced by high intensity of random writes). Given the complementary properties of HDDs and SSDs in terms of cost, performance, and lifetime, the current consensus among several storage experts is to view SSDs not as a replacement for HDD, but rather as a complementary device within the high-performance storage hierarchy. Thus, we design and evaluate such a hybrid storage system with HybridPlan that is an improved capacity planning technique to administrators with the overall goal of operating within cost-budgets. HybridPlan is able to find the most cost-effective hybrid storage configuration with different types of SSDs and HDDs

Capacity Planning↗

Specificity and Engagement: Increasing ELSI s Relevance to Nano Scientists

Scholars studying the ethical, legal, and social issues (ELSI) associated with emerging technologies maintain the importance of considering these issues throughout the research and development cycle, even during the earliest stages of basic research. Embedding these considerations within the scientific process requires communication between ELSI scholars and the community of physical scientists who are conducting that basic research. We posit that this communication can be effective on a broad scale only if it links societal issues directly to characteristics of the emerging technology that are relevant to the physical and natural scientists involved in research and development. In this article, we examine nano-ELSI literature from 2003 to 2010 to discern the degree to which it makes these types of explicit connections. We find that, while the literature identifies a wide range of issues of societal concern, it generally does so in a non-specific manner. It neither links societal issues to particular forms or characteristics of widely divergent nanotechnologies nor to any of the many potential uses to which those nanotechnologies may be put. We believe that these kinds of specificity are essential to those engaged in nano-scale research. We also compare the literature-based findings to observations from interviews we conducted with nanoscientists and conclude that ELSI scholars should add technical- and application-related forms of specificity to their work and their writings to enhance effectiveness and impact in communicating with one important target audience members of the nanoscale science community.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Recent Progress on Laser Manufacturing of Microsize Energy Devices on Flexible Substrates

We report on the impact of laser processing on material and device performance characteristics for integrated energy applications. A femtosecond laser was used for development of flexible and transparent supercapacitors, while a nanosecond laser was successfully exploited for high-performance Al–air battery development. A laser direct-write process enabled integration of a three-dimensional-structured micro-supercapacitor on flexible polymer substrate, exhibiting peak specific capacitance of 42.6 mF/cm 2 at current density of 0.1 mA/cm 2 . Femtosecond laser processing was also exploited for development of a novel transparent supercapacitor on silk substrate. The MnO 2 -coated transparent supercapacitors exhibited high transmittance exceeding 59%. Laser processing in combination with printing technique was used for development of a novel Al–air battery. The nanosecond laser process was effective in sintering the anode printed using Al nanoparticle ink. The efficiency of the laser sintering process was reflected in good battery discharge performance.

25 ENERGY STORAGE↗

Guidelines in review: Comparison of ESC and AHA guidance for the diagnosis and management of infective endocarditis in adults

Over recent years, new evidence has led a rethinking of the available guidance on the diagnosis and management of infective endocarditis (IE). This review compares the most recently available guidance provided by the American Heart Association (AHA) IE Writing Committee, and the Task Force for the management of IE of the European Society of Cardiology (ESC). This represents the sixth of a new series of comparative guidelines review published in the Journal.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

ACC/AATS/AHA/ASE/ASNC/HRS/SCAI/SCCT/SCMR/STS 2019 Appropriate Use Criteria for Multimodality Imaging in the Assessment of Cardiac Structure and Function in Nonvalvular Heart Disease

This document is the second of 2 companion appropriate use criteria (AUC) documents developed by the American College of Cardiology, American Association for Thoracic Surgery, American Heart Association, American Society of Echocardiography, American Society of Nuclear Cardiology, Heart Rhythm Society, Society for Cardiovascular Angiography and Interventions, Society of Cardiovascular Computed Tomography, Society for Cardiovascular Magnetic Resonance, and Society of Thoracic Surgeons. The first document (J Am Coll Cardiol 2017;70:1647-1672) addresses the evaluation and use of multimodality imaging in the diagnosis and management of valvular heart disease, whereas this document addresses this topic with regard to structural (nonvalvular) heart disease. While dealing with different subjects, the 2 documents do share a common structure and feature some clinical overlap. The goal of the companion AUC documents is to provide a comprehensive resource for multimodality imaging in the context of structural and valvular heart disease, encompassing multiple imaging modalities. Using standardized methodology, the clinical scenarios (indications) were developed by a diverse writing group to represent patient presentations encountered in everyday practice and included common applications and anticipated uses. Where appropriate, the scenarios were developed on the basis of the most current American College of Cardiology/American Heart Association Clinical Practice Guidelines. A separate, independent rating panel scored the 102 clinical scenarios in this document on a scale of 1 to 9. Scores of 7 to 9 indicate that a modality is considered appropriate for the clinical scenario presented. Midrange scores of 4 to 6 indicate that a modality may be appropriate for the clinical scenario, and scores of 1 to 3 indicate that a modality is considered rarely appropriate for the clinical scenario. The primary objective of the AUC is to provide a framework for the assessment of these scenarios by practices that will improve and standardize physician decision making. AUC publications reflect an ongoing effort by the American College of Cardiology to critically and systematically create, review, and categorize clinical situations in which diagnostic tests and procedures are utilized by physicians caring for patients with cardiovascular diseases. The process is based on the current understanding of the technical capabilities of the imaging modalities examined.

62 RADIOLOGY AND NUCLEAR MEDICINE↗