Search NASA⌕ Search

SEARCH · Search NASA

Results for “aqueous solution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Mineral-specific heterogeneous neptunium sorption onto geological repository rocks in oxic and anoxic conditions and various temperatures

Neptunium poses challenges for radioactive wastes management due to its long half-life and ingrowth from americium decay, as well as its high mobility in water in its oxidized forms. Np(V)-bearing aqueous solutions were contacted with polished and crushed gneiss and dolerite from the Yeniseisky site, Russia, which is under consideration as a location for an underground repository, both in oxic and anoxic conditions at 20 and 90 °C. Neptunium sorption on crushed gneiss and dolerite in oxic conditions at 20 °C was quite low, but increased substantially in anoxic conditions. Autoradiography on samples treated at 20 °C revealed that sorbed Np was associated mostly with dark colored iron-bearing minerals, and solvent extraction indicated partial reduction of Np(V) to Np(IV). Sorption of Np from aqueous solutions contacted with dolerite and gneiss at 90 °C was in all cases higher than at the lower temperature. Autoradiography of polished rock samples treated in anoxic conditions at 90 °C revealed that Fe-bearing minerals had 3–4 orders of magnitude more Np sorbed on them than the quartz and feldspar grains. X-ray photoelectron spectroscopy indicated this sorbed Np was present as NpO 2 . This study supports the concept that the geologic conditions present at the planned repository site will retard Np migration.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Thermodynamically Guided Synthesis of Mixed-Linker Zr-MOFs with Enhanced Tunability

Guided by thermodynamics, we have synthesized two mixed-linker zirconium-based metal–organic frameworks (Zr-MOFs), namely, PCN-133 and PCN-134. Both of them possess a layer-pillar structure, in which the connection between Zr 6 clusters and primary BTB linkers form a (3,6)-connected kdg layer that is further extended into 3D frameworks by auxiliary DCDPS/TCPP linkers (BTB = benzene tribenzoate, DCDPS = 4,4'-dicarboxydiphenyl sulfone, TCPP = tetrakis(4-carboxyphenyl)porphyrin). PCN-134 demonstrates high porosity (N 2 uptake of 717 cm 3 ·g –1 and BET surface area of 1946 cm 2 ·g –1 ) and excellent chemical stability in aqueous solutions with pH values ranging from 0 to 13. More importantly, PCN-134 tolerates the partial absence of auxiliary linkers leading to structural defects during the assembly process while preserving its framework integrity. Furthermore, the defect density can be systematically controlled by tuning the occupancy of the auxiliary linker, which in turn affects the MOF properties. For instance, the dichromate uptake of PCN-134 is tuned by adjusting the BTB/TCPP ratios, which gives rise to an efficient dichromate absorbent when the TCPP molar ratio in linkers is set as 22%. Additionally, the photocatalytic reduction of Cr(VI) in aqueous solution was also performed by PCN-134–22%TCPP which exhibits excellent catalytic activity. This work not only opens up a new synthetic route toward mixed-linker MOFs, but also provides tunable control of MOF defects and, in turn, the properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tailoring nanoscopic confines to maximize catalytic activity of hydronium ions

Acid catalysis by hydronium ions is ubiquitous in aqueous-phase organic reactions. Here we show that hydronium ion catalysis, exemplified by intramolecular dehydration of cyclohexanol, is markedly influenced by steric constraints, yielding turnover rates that increase by up to two orders of magnitude in tight confines relative to an aqueous solution of a Brønsted acid. The higher activities in zeolites BEA and FAU than in water are caused by more positive activation entropies that more than offset higher activation enthalpies. The higher activity in zeolite MFI with pores smaller than BEA and FAU is caused by a lower activation enthalpy in the tighter confines that more than offsets a less positive activation entropy. Molecularly sized pores significantly enhance the association between hydronium ions and alcohols in a steric environment resembling the constraints in pockets of enzymes stabilizing active sites.

heterogeneous catalysis, reaction kinetics, Reacti↗

Lateral Water Structure Connects Metal Oxide Nanoparticle Faces

When a metal oxide surface is immersed in aqueous solution, it has the ability to bind, orient, and order interfacial water, affecting both chemical and physical interactions with the surface. Structured interfacial water thus possesses time-averaged, spatially varying polarization charge and potential that are comparable to those arising due to ion accumulation. It is well established that interfacial water structure propagates from the surface into bulk solution. Here, we show that interfacial water structure also propagates laterally, with important consequences. The constant pH molecular dynamics was used to impose a pH difference between opposite faces of a model goethite (a-FeOOH) nanoparticle and quantify water polarization charge on intervening faces. We find that the structure of water on one face is strongly affected by the structure on nearby surfaces, revealing the importance of long-range lateral hydrogen bonding networks with implications for particle aggregation, oriented attachment, and processes such as dissolution and growth.

Zarzycki, Piotr P.↗

Extraction of Mercury Utilizing 3D Printed Media - Mercury Extraction Coalescer (MEC)

Mercury is a persistent environmental hazard that is strictly regulated. The design of a 3D printed coalescer was proposed to facilitate segregation and/or adsorption of elemental mercury from aqueous solutions. 3D printing techniques were employed to generate designed surfaces and internal geometries that would otherwise be very difficult to near impossible through traditional manufacturing processes. The proposed coalescer was designed to take advantage of advancements in 3D printing to incorporate surface sub-structures and material compositions targeted specifically at mercury adsorption. The initial phase of research targeted the design of physical structures that could assist with adsorption or segregation of mercury from acidic condensate, rendering it isolated and preventing recirculation back into the chemical process, as well as implementation into standard environmental remediation techniques for contaminated aqueous solutions. Future work was to focus on formulating reactive coalescers to improve chemisorption along with physisorption.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Vaterite Optical Petrography in Lake Sturgeon Otoliths

Vaterite occurring in fish otoliths exhibits plumose and spherulitic habits, the latter being like those grown from aqueous solutions. Vaterite spherulites are known to have sheaf-like texture and can be up to 100 μm in size. In thin section, the spherulites typically show uniaxial positive interference figures between cross-polarizers using a polarizing light microscope but without conoscopic or Bertrand lenses because the spherulites mimic the effect of these lenses. Plumose vaterite can show both uniaxial (+) and biaxial (+) interference figures with a small 2V, which suggests that crystal structural models for vaterite should have the plane of the carbonate group parallel to the optic axis or acute bisectrix. Finally, vaterite spherulites grown from aqueous solution exhibit similar structure and growth habits.

58 GEOSCIENCES↗

The infrared optical constants of sulfuric acid at 250 K

Results are presented for measurements of the IR spectral reflectance at near-normal incidence of aqueous solutions of sulfuric acid with acid concentrations of 75% and 95.6% by weight. Kramers-Kronig analyses of the reflectance data are employed to obtain values of the optical constants n(nu) and k(nu) in the spectral range from 400 to 6000 cm to the -1 power. The optical constants of these solutions at 250 K and 300 K are compared. It is found that in spectral regions remote from strong absorption bands, the values of the n(nu) indices obtained at 250 K agree with the values given by Lorentz-Lorenz correction of the same indices at 300 K. All absorption bands observed at 300 K are found to be present at 250 K with slight shifts in frequency and with significant differences in the k(nu) indices at the band maxima. Based on these results, it is concluded that the clouds of Venus probably consist of droplets of aqueous solutions of sulfuric acid with acid concentrations of about 75% by weight.

Pinkley, L. W.↗

Enhancements of Nucleate Boiling Under Microgravity Conditions

This paper presents two means for enhancing nucleate boiling and critical heat flux under microgravity conditions: using micro-configured metal-graphite composites as the boiling surface and dilute aqueous solutions of long-chain alcohols as the working fluid. In the former, thermocapillary force induced by temperature difference between the graphite-fiber tips and the metal matrix plays an important role in bubble detachment. Thus boiling-heat transfer performance does not deteriorate in a reduced-gravity environment. In the latter cases, the surface tension-temperature gradient of the long-chain alcohol solutions turns positive as the temperature exceeds a certain value. Consequently, the Marangoni effect does not impede, but rather aids in bubble departure from the heating surface. This feature is most favorable in microgravity. As a result, the bubble size of departure is substantially reduced at higher frequencies. Based on the existing experimental data, and a two-tier theoretical model, correlation formulas are derived for nucleate boiling on the copper-graphite and aluminum-graphite composite surfaces, in both the isolated and coalesced bubble regimes. In addition, performance equations for nucleate boiling and critical heat flux in dilute aqueous solutions of long-chain alcohols are obtained.

Zhang, Nengli↗

Investigating the CO 2 pressure effect on underwater laser-induced plasma emission of Eu and Yb

Laser-induced breakdown spectroscopy (LIBS) is an emerging analytical technique for in situ determination of elements in natural resources. The technique is employed for the study of two rare earth elements (Eu and Yb) in aqueous solutions at pressures ranging from ambient to 250 bars. Underwater plasma is created at ambient and elevated pressures to record LIBS spectra from their solutions using Nd:YAG laser operated at its fundamental wavelength of 1064 nm. The effect of CO2 pressure on the characteristic spectral signatures of these two rare earth elements is presented. Variation of intensity, integrated intensity, and width of selected emission lines with CO2 pressure is explained. The technique could potentially be used for the detection of rare earth elements in oceanic, carbon sequestration, and geothermal fluids.

36 MATERIALS SCIENCE↗

Modeling and Optimization of Zeolites for Contaminant Removal from Coal Combustion Impoundment Leachates

Coal Combustion Residual (CCR) landfills in the U.S. can lead to elevated contaminant concentrations in groundwater and runoff, particularly of arsenic, boron, and selenium. Zeolites can be readily synthesized from materials contained within the coal combustion ash impoundments and can be cation-exchanged to enhance adsorption capacity, selectivity, and reactivity. However, the optimization of zeolites becomes a daunting task when accounting for the variety of Si:Al ratios, the species of extra-framework cations present, and the zeolite pore structure. Molecular simulations provide methods to study and guide the design of zeolites for the sorption of contaminants from aqueous solution. In this work, models that predict the sorption of arsenic, boron, and selenium from water using cation-exchanged zeolites. Because of the lack of experimental adsorption data for these species of contaminants, models were parametrized to reproduce the results of first-principles calculations and then used to predict sorption for zeolites for a dataset containing 6000 combinations of zeolites and sorption conditions. Machine learning was used to train a model to predict sorption for materials in this database based on the results of the molecular simulations. Next, a genetic algorithm was used to optimize zeolites for the removal of each contaminant from aqueous solution for individual impoundment sites based on contaminant concentrations reported by the Electric Power Research Institute.

Findley, John↗

Electrodeposition Process and Performance of CuIn(Se{sub x}S{sub 1−x}){sub 2} Film for Absorption Layer of Thin-Film Solar Cells

CuIn(Se{sub x}S{sub 1−x}){sub 2} thin film is prepared by the electrodeposition method for the absorption layer of the solar cell. The CuIn(Se{sub x}S{sub 1−x}){sub 2} films are characterized by cyclic voltammetry measurement for the reduction of copper, indium, selenium and sulfur in selenium and sulfur in aqueous solutions with sodium citrate and without sodium citrate. In the four cases, the defined reduction process for every single element is obtained and it is observed that sodium citrate changes the reduction potentials. A linear relationship between the current density of the reduction peak and (scan rate v){sup 1/2} for copper and indium is achieved, indicating that the process is diffusion controlled. The diffusion coefficients of copper and indium ions are calculated. The diffusional coefficient D value of copper is higher than that of indium, and this is the reason why the deposition rate of copper is higher. When four elements are co-deposited in the aqueous solution with sodium citrate, the quaternary compound of CuIn(Se{sub x}S{sub 1−x}){sub 2} is deposited together with Cu{sub 3}Se{sub 2} impure phases after annealing, as found by XRD spectra. Morphology is observed by SEM and AFM. The chemical state of the films components is analyzed by XPS. The UV-Visible spectrophotometer and electrochemistry workstation are employed to measure the photoelectric properties. The results show that the smooth, uniform and compact CuIn(Se{sub x}S{sub 1−x}){sub 2} film is a semiconductor with a band gap of 1.49 eV and a photovoltaic conversion efficiency of 0.45%.

36 MATERIALS SCIENCE↗

Proton affinity of the histidine-tryptophan cluster motif from the influenza A virus from ab initio molecular dynamics

Ab initio molecular dynamics calculations have been used to compare and contrast the deprotonation reaction of a histidine residue in aqueous solution with the situation arising in a histidine-tryptophan cluster. The latter is used as a model of the proton storage unit present in the pore of the M2 proton conducting ion channel. We compute potentials of mean force for the dissociation of a proton from the Nδ and Nϵ positions of the imidazole group to estimate the pK a s. Anticipating our results, we will see that the estimated pK a for the first protonation event of the M2 channel is in good agreement with experimental estimates. Surprisingly, despite the fact that the histidine is partially desolvated in the M2 channel, the affinity for protons is similar to that of a histidine in aqueous solution. Importantly, the electrostatic environment provided by the indoles is responsible for the stabilization of the charged imidazolium.

Chemistry↗

Structure of Hydronium (H3O+)/Chloride (Cl-) Contact Ion Pairs in Aqueous Hydrochloric Acid Solution: A Zundel-like Local Configuration

Details of the H3O+ and H2O structure in the first solvation shell about Cl- in aqueous HCl solutions are reported from x-ray absorption fine structure (XAFS) measurements. Results show increasing degrees of contact ion pairing between Cl- and H3O+ as the HCl concentration increases from 6.0 m, 10.0 m and finally 16.1 m HCl (concentrated acid). At the highest acid concentration there are on average, approximately 1.6 H3O+ ions and 4.2 H2O’s in the first shell about Cl-. The structure of the Cl-/H3O+ contact ion pair is distinctly different than that of the H2O structure about Cl-. The Cl-O bond length (2.98Å) for Cl-/H3O+ is approximately 0.16 Å shorter than the Cl-/H2O bond. The bridging proton resides at an intermediate position between Cl and O at 1.60 Å from the Cl- and approximately 1.37 Å from the O of the H3O+. The bridging-proton structure of this contact ion pair, [Cl-H-OH2], is similar to structure of the water Zundel ion, [H2O-H-OH2]+. In both cases there is a shortened Cl-O or O-O bond and the intervening proton bond distances are substantially longer than for the covalent bonds of either HCl or H2O. The results further our understanding of the interaction H3O+ with Cl- that is of interest to fundamental physical chemistry and that has consequences in biochemical, geochemical and atmospheric processes.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A combined theoretical-experimental study of interactions between vanadium ions and Nafion membrane in all-vanadium redox flow batteries

Vanadium redox flow batteries (VRFBs) are a promising solution for large-scale energy storage, but a number of problems still impede the deployment of long-lifetime VRFBs. One important aspect of efficient operation of VRFBs is understanding interactions between vanadium species and the membrane. Herein, we investigate the interactions between all four vanadium cations and Nafion membrane by a combination of infrared (IR) spectroscopy and density-functional-theory (DFT)-based static and molecular dynamics simulations. It is observed that vanadium species primarily lead to changes in the IR spectrum of Nafion in the SO 3 - spectral region which is attributed to the interaction between vanadium species and the SO 3 - exchange sites. DFT calculations of vanadium - Nafion complexes in the gas phase show that it is thermodynamically favorable for all vanadium cations to bind to SO 3 - via a contact pair mechanism. Car-Parrinello molecular dynamics-based metadynamics simulations of cation-Nafion systems in aqueous solution suggest that and species coordinate spontaneously to SO 3 - , which is not the case for VO 2+ and VO 2 + . The interaction behavior of the uncycled membrane determined in this study is used to explain the experimentally observed changes in the vibrational spectra, and is discussed in light of previous results on device-cycled membranes.

00-01↗

Nanocellular foam with solid flame retardant

Prepare nanofoam by (a) providing an aqueous solution of a flame retardant dissolved in an aqueous solvent, wherein the flame retardant is a solid at 23.degree. C. and 101 kiloPascals pressure when in neat form; (b) providing a fluid polymer composition selected from a solution of polymer dissolved in a water-miscible solvent or a latex of polymer particles in a continuous aqueous phase; (c) mixing the aqueous solution of flame retardant with the fluid polymer composition to form a mixture; (d) removing water and, if present, solvent from the mixture to produce a polymeric composition having less than 74 weight-percent flame retardant based on total polymeric composition weight; (e) compound the polymeric composition with a matrix polymer to form a matrix polymer composition; and (f) foam the matrix polymer composition into nanofoam having a porosity of at least 60 percent.

36 MATERIALS SCIENCE↗

Composition for recovery of lithium from brines, and process of using said composition

A solid particulate composition useful in extracting a lithium salt from aqueous solutions, the composition comprising lithium, metal atoms, oxygen atoms, and at least one anionic species (X) selected from halide, nitrate, sulfate, carbonate and bicarbonate, all in a framework structure, wherein said metal atoms are selected from at least one of oxophilic main group metal and oxophilic transition metal atoms, provided that, if the metal atoms comprise aluminum atoms, then at least 10 mol % of said aluminum atoms are substituted with at least one metal atom selected from said at least one oxophilic main group and oxophilic transition metal atoms, other than aluminum, and wherein said lithium is present in said composition in an amount less than a saturated amount in order to permit extraction of lithium salt. Methods for extracting and recovering a lithium salt from an aqueous solution by use of the above-described composition are also described.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Leveraging Actinide Hydrolysis Chemistry for Targeted Th and U Separations using Amidoxime-Functionalized Poly(HIPE)s

Polymerized high internal phase emulsions (poly(HIPE)s) are porous polymer monoliths whose synthesis can easily be tailored to allow incorporation of functional units. In this work, nitrile containing poly(HIPE)s have been prepared with either acrylonitrile (AN) or 4-cyanostyrene (4CS) comonomers. Post-synthetic modification of these nitrile-containing poly(HIPE)s yields their corresponding amidoximated analogues, which were studied for actinide uptake. These amidoxime-functionalized, porous polymers were shown to adsorb 95 % Th4+ species from aqueous solution within 30 minutes. In contrast to other amidoxime containing polymers the uptake of UO22+ in these poly(HIPE)s is lower under similar conditions. A critical analysis of actinide separations and high-energy X-ray scattering data provides insight into the polymers’ selectivity, enabled by the uptake of multinuclear Th clusters.

actinides↗