Search NASA⌕ Search

SEARCH · Search NASA

Results for “binders”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

High-Speed Fabrication of Lithium-Ion Battery Electrodes by UV-Curing

In this study, UV-curing was investigated as an alternative method to provide fast production of composite cathodes and significantly reduce the time and energy required for solvent removal in lithium-ion battery fabrication. To serve our purpose, low-molecular-weight polysiloxane acrylate (PSA) was designed and synthesized from a polysiloxane epoxide precursor. In the presence of the acrylic acid additive LiNi1/ 3Mn1/3Co1/3O2 (NMC), electrode laminates containing 10 wt% PSA binder were successfully fabricated by UVcuring. The cured electrode exhibited good mechanical and electrochemical properties. At current rates up to C/3, the cell performance of the UV-cured NMC electrode was comparable to that of conventional polyvinylidene fluoride (PVDF)-bound NMC electrode. Our initial success in applying high-speed UV-curing in composite electrode fabrication has proved that it is a promising route to substantially reducing the capital and operation costs of lithium-ion battery electrode manufacturing and additionally bringing about important environmental benefits.

binder↗

Influence of Water, Vacuum, and Temperature on Surface Conditions of a Zeolite‐based Molecular Sieve

Molecular sieves such as zeolite-based materials are ubiquitous in industrial separation processes. However, there is a significant gap in understanding the surface properties and adsorption mechanisms for commercial zeolites, as most research focuses on pure zeolite powders rather than industrially relevant forms. Here, this work addresses this gap in understanding by employing advanced characterization techniques, including positron annihilation spectroscopy, X-ray diffraction, scanning electron microscopy, X-ray fluorescence spectroscopy, X-ray photoelectron spectroscopy, liquid nitrogen sorption, and Fourier-transform infrared spectroscopy, to investigate the adsorption and desorption behavior of water in commercial zeolite 13X. Our research reveals insights into the pore-filling mechanisms, the impact of material binders on adsorption properties, and the dynamics of hydration and drying processes for zeolites. Monitoring changes on a minute scale allowed the distinction between fast and slow processes leading to sample drying. The identification of positronium bound to Na + ions indicated that water molecules remain in the vicinity of Na + ions after air-drying zeolite 13X. These findings highlight the importance of various environmental conditions in restoring zeolite properties to baseline after hydration, with significant implications for optimizing industrial processes. This work sets the direction for further research aimed at developing more efficient and robust separation techniques.

Beads Binder↗

Flexible Pillared Graphene-Paper Electrodes for High-Performance Electrochemical Supercapacitors

Flexible graphene paper (GP) pillared by carbon black (CB) nanoparticles using a simple vacuum filtration method is developed as a high-performance electrode material for supercapacitors. Through the introduction of CB nanoparticles as spacers, the self-restacking of graphene sheets during the filtration process is mitigated to a great extent. The pillared GP-based supercapacitors exhibit excellent electrochemical performances and cyclic stabilities compared with GP without the addition of CB nanoparticles. At a scan rate of 10 mV s -1 , the specific capacitance of the pillared GP is 138 F g -1 and 83.2 F g -1 with negligible 3.85% and 4.35% capacitance degradation after 2000 cycles in aqueous and organic electrolytes, respectively. At an extremely fast scan rate of 500 mV s -1 , the specific capacitance can reach 80 F g -1 in aqueous electrolyte. No binder is needed for assembling the supercapacitor cells and the pillared GP itself may serve as a current collector due to its intrinsic high electrical conductivity. Finally, the pillared GP has great potential in the development of promising flexible and ultralight-weight supercapacitors for electrochemical energy storage.

36 MATERIALS SCIENCE↗

Dynamic simulation of powder packing structure for powder bed additive manufacturing

Here, powder packing structure is a critical parameter of powder bed-based additive manufacturing (AM). Experimental characterization of powder is typically limited to measuring bulk properties, whereas many numerical models of AM powder packing are based on geometrical consideration without accounting for particle-to-particle interactions. In the present paper, the powder packing dynamics is simulated using a discrete element method (DEM)-based model that solves the mechanical contact forces and moments between individual particles. As DEM uses explicit time integration, a main challenge in modeling dynamics of metallic powder packing is the need for extremely fine time increment size (e.g., in the order of 1 ns for a 10-μm-diameter particle). The effect of mass scaling, employed for speeding up the calculation, on the simulation results is examined in a test case of powder particles packed inside a box container. The calculated packing density for two different particle size distributions is validated against independent literature data for laser powder bed AM with AISI 316L stainless steel powder. The sensitivity of key input parameters (e.g., friction coefficient) is further evaluated in this test case. The powder packing model is then applied to a practical situation of binder jet AM involving rolling of multiple layers of IN718 powder particles onto a powder bed, for which the calculated packing density is also validated with independent literature data.

42 ENGINEERING↗

Coupled Thermoelasticity Problem for Multilayer Composite Shells of Revolution. II. Applied Problems

We deduce a system of nonclassical nonlinear differential equations of coupled thermoelasticity for multilayer composite anisotropic shells of revolution in a coordinate system connected with the lines of curvature of the reference surface. The constructed nonclassical model of deformation of a multilayer shell and the nonlinear model of distribution of heat fluxes over the thickness of the shell enable us to take into account the transverse shear strains and guarantee the validity of the conditions of thermal and mechanical conjugation of the layers and the conditions of thermomechanical loading on the faces of the shell. We deduce the linearized differential equations of the axisymmetric coupled problem of thermoelasticity for a conic reinforced multilayer shell and solve the quasistatic problem of thermoelasticity for a two-layer cylindrical shell cross-reinforced in the direction of helical lines. By using the structural approach to the formulation of the criteria of strength for composite materials, we determine the loads of the onset of fracture of the binder and reinforcing elements of a two-layer metal-composite cylindrical shell.

42 ENGINEERING↗

Effect of SiO{sub 2} on the Formation of Acicular Calcium Ferrite in Sinter

SiO{sub 2} greatly influences the formation of acicular calcium ferrite (ACF), which is the main binder phase in sinter, but the mechanism of its influence is not yet clear. Experiments were carried out under air at 1200 °C with different amounts of SiO{sub 2} mixed with Fe{sub 2}O{sub 3} and Ca(OH){sub 2}. X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), and three-dimensional (3D) reconstruction were used to characterize the phase and morphological changes of the sintered samples. The results show that SiO{sub 2} can form silicon-ferrite of calcium (SFC), which is beneficial to the formation of ACF in sinter. The SFC content first increased and then decreased with the increasing SiO{sub 2} content. The sintered sample contained the highest contents of SFC and ACF when w(SiO{sub 2}) was 3 to 4 pct. The morphological changes in calcium ferrite observed with the increasing SiO{sub 2} content followed a sequence of massive → platy → acicular; both platy calcium ferrite and ACF were the longest in one direction in their 3D morphology. The inclusion of Si{sup 4+} in calcium ferrite crystals changes the crystal growth habit from having no obvious orientation to having a preferential orientation along the (040) or (320) surfaces, as determined by the first-principles calculations and XRD analysis of block samples. Viscosity was the main environmental factor influencing the size of ACF in samples with sufficient liquid phase.

36 MATERIALS SCIENCE↗

Accelerated carbonation of cement pastes in situ monitored by neutron diffraction

In-situ monitoring of the changes that take place in the phase composition of cement pastes during accelerated carbonation (100% CO{sub 2}) for different binders, has been carried out, by taking Neutron Diffraction patterns in parallel with the carbonation experiments. The variation of the intensity of chosen reflections for each phase along the experiment has been used to monitor concentration changes and has supplied data, in real time, for fractional conversion of different phases (Portlandite, Ettringite and CSH gel) of the hydrated cement pastes. Fitting of these results has allowed to make a qualitative approach to the kinetics of the carbonation of the different phases and extracting conclusions on the microstructural changes that takes place during the carbonation of cement pastes.

36 MATERIALS SCIENCE↗

Hydration of calcium sulfoaluminate cements - Experimental findings and thermodynamic modelling

Calcium sulfoaluminate cements (CSA) are a promising low-CO{sub 2} alternative to ordinary Portland cements and are as well of interest concerning their use as binder for waste encapsulation. In this study, the hydration of two CSA cements has been investigated experimentally and by thermodynamic modelling between 1 h and 28 days at w/c ratios of 0.72 and 0.80, respectively. The main hydration product of CSA is ettringite, which precipitates together with amorphous Al(OH){sub 3} until the calcium sulfate is consumed after around 1-2 days of hydration. Afterwards, monosulfate is formed. In the presence of belite, straetlingite occurs as an additional hydration product. The pore solution analysis reveals that straetlingite can bind a part of the potassium ions, which are released by the clinker minerals. The microstructure of both cements is quite dense even after 16 h of hydration, with not much pore space available at a sample age of 28 days. The pore solution of both cements is dominated during the first hours of hydration by potassium, sodium, calcium, aluminium and sulfate; the pH is around 10-11. When the calcium sulfate is depleted, the sulfate concentration drops by a factor of 10. This increases pH to around 12.5-12.8. Based on the experimental data, a thermodynamic hydration model for CSA cements based on cement composition, hydration kinetics of clinker phases and calculations of thermodynamic equilibria by geochemical speciation has been established. The modelled phase development with ongoing hydration agrees well with the experimental findings.

36 MATERIALS SCIENCE↗

Development of low-pH cementitious materials for HLRW repositories

One of the most accepted engineering construction concepts of underground repositories for high radioactive waste considers the use of low-pH cementitious materials. This paper deals with the design of those based on Ordinary Portland Cements with high contents of silica fume and/or fly ashes that modify most of the concrete 'standard' properties, the pore fluid composition and the microstructure of the hydrated products. Their resistance to long-term groundwater aggression is also evaluated. The results show that the use of OPC cement binders with high silica content produces low-pH pore waters and the microstructure of these cement pastes is different from the conventional OPC ones, generating C-S-H gels with lower CaO/SiO{sub 2} ratios that possibly bind alkali ions. Leaching tests show a good resistance of low-pH concretes against groundwater aggression although an altered front can be observed.

36 MATERIALS SCIENCE↗

Alkaline solution/binder ratio as a determining factor in the alkaline activation of aluminosilicates

This study investigates the effect of the alkaline solution/binder (S/B) ratio on the composition and nanostructure of the reaction products generated in the alkaline activation of aluminosilicates. The experiments used two mixtures of fly ash and dehydroxylated white clay and for each of these, varying proportions of the solution components. The alkali activator was an 8 M NaOH solution (with and without sodium silicate) used at three S/B ratios: 0.50, 0.75 and 1.25. The {sup 29}Si, {sup 27}Al MAS NMR and XRD characterisation of the reaction products reveal that for ratios nearest the value delivering suitable paste workability, the reaction-product composition and structure depend primarily on the nature and composition of the starting materials and the alkaline activator used. However, when an excess alkaline activator is present in the system, the reaction products tend to exhibit SiO{sub 2}/Al{sub 2}O{sub 3} ratios of approximately 1, irrespective of the composition of the starting binder or the alkaline activator.

36 MATERIALS SCIENCE↗

Incorporation of titanium dioxide nanoparticles in mortars - Influence of microstructure in the hardened state properties and photocatalytic activity

The environmental pollution in urban areas is one of the causes for poor indoor air quality in buildings, particularly in suburban areas. The development of photocatalytic construction materials can contribute to clean the air and improve sustainability levels. Previous studies have focused mainly in cement and concrete materials, disregarding the potential application in historic buildings. In this work, a photocatalytic additive (titanium dioxide) was added to mortars prepared with aerial lime, cement and gypsum binders. The main goal was to study the way that microstructural changes affect the photocatalytic efficiency. The photocatalytic activity was determined using a reactor developed to assess the degradation rate with a common urban pollutant, NO{sub x}. The laboratory results show that all the compositions tested exhibited high photocatalytic efficiency. It was demonstrated that photocatalytic mortars can be applied in new and old buildings, because the nanoadditives do not compromise the mortar hardened state properties.

36 MATERIALS SCIENCE↗

Hydration studies of calcium sulfoaluminate cements blended with fly ash

The main objective of this work is to study the hydration and properties of calcium sulfoaluminate cement pastes blended with fly ash (FA) and the corresponding mortars at different hydration ages. Laboratory X-ray powder diffraction, rheological studies, thermal analysis, porosimetry and compressive strength measurements were performed. The analysis of the diffraction data by Rietveld method allowed quantifying crystalline phases and overall amorphous contents. The studied parameters were: i) FA content, 0, 15 and 30 wt.%; and ii) water addition, water-to-CSA mass ratio (w/CSA = 0.50 and 0.65), and water-to-binder mass ratio (w/b = 0.50). Finally, compressive strengths after 6 months of 0 and 15 wt.% FA [w/CSA = 0.50] mortars were similar: 73 ± 2 and 72 ± 3 MPa, respectively. This is justified by the filler effect of the FA as no strong evidences of reactivity of FA with CSA were observed. These results support the partial substitution of CSA cements with FA with the economic and environmental benefits.

36 MATERIALS SCIENCE↗

Investigation of the swelling behavior of cationic exchange resins saturated with Na{sup +} ions in a C{sub 3}S paste

Ion exchange resins (IERs) are widely used by the nuclear industry to decontaminate radioactive effluents. Spent products are usually encapsulated in cementitious materials. However, the solidified waste form can exhibit strong expansion, possibly leading to cracking, if the appropriate binder is not used. In this work, the interactions between cationic resins in the Na{sup +} form and tricalcium silicate are investigated during the early stages of hydration in order to gain a better understanding of the expansion process. It is shown that the IERs exhibit a transient swelling of small magnitude due to the decrease in the osmotic pressure of the external solution. This expansion, which occurs just after setting, is sufficient to damage the material which is poorly consolidated for several reasons: low degree of hydration, precipitation of poorly cohesive sodium-bearing C–S–H, and very heterogeneous microstructure with zones of high porosity.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Influence of sodium borate on the early age hydration of calcium sulfoaluminate cement

Calcium sulfoaluminate (CSA) cements are potential candidates for the conditioning of radioactive wastes with high sodium borate concentrations. This work thus investigates early age hydration of two CSA cements with different gypsum contents (0 to 20%) as a function of the mixing solution composition (borate and NaOH concentrations). Gypsum plays a key role in controlling the reactivity of cement. When the mixing solution is pure water, increasing the gypsum concentration accelerates cement hydration. However, the reverse is observed when the mixing solution contains sodium borate. Until gypsum exhaustion, the pore solution pH remains constant at ~ 10.8, and a poorly crystallized borate compound (ulexite) precipitates. A correlation is established between this transient precipitation and the hydration delay. Decreasing the gypsum content in the binder, or increasing the sodium content in the mixing solution, are two ways of reducing the stability of ulexite, thus decreasing the hydration delay.

36 MATERIALS SCIENCE↗

A multinuclear static NMR study of geopolymerisation

Geopolymers are inorganic binders obtained by alkali activation of aluminosilicates. While the structure of geopolymers is now well understood, the details of the geopolymerisation reaction and their impact on the rheology of the paste remain uncertain. In this work, we follow the elastic properties of a paste made with metakaolin and sodium silicate solution. After the first sharp increase of elastic modulus occurring a few hundred of seconds after mixing and related to the heterogeneous formation of an alumina–silicate gel with a molar ratio Si/Al < 4 located at the grains boundaries, we focus on the progressive increase in elastic modulus on a period of few hours during the setting of the geopolymer. In this study, we combine the study of rheological properties of the paste with {sup 23}Na, {sup 27}Al and {sup 29}Si static NMR measurement in order to better understand the origin of this second increase in elastic modulus. Our results show that, after a few hours, Al and Na evolution in the liquid phase are concomitant. This suggests the precipitation of an aluminosilicate phase where Al is in tetrahedral position and Na compensates the charge. Furthermore, Si speciation confirms this result and allows us to identify the precipitation of a product, which has a chemical composition close to the final composition of geopolymer. This study provides strong evidence for a heterogeneous formation of an aluminosilicate glass directly from the first gel and the silicate solution without the need for a reorganisation of Gel 1 into Gel 2.

36 MATERIALS SCIENCE↗

Limestone reaction in calcium aluminate cement–calcium sulfate systems

This paper reports a study of ternary blends composed of calcium aluminate cement, calcium sulfate hemihydrate and limestone. Compressive strength tests and hydration kinetics were studied as a function of limestone and calcium sulfate content. The phase evolution and the total porosity were followed and compared to thermodynamic simulation to understand the reactions involved and the effect of limestone on these binders. The reaction of limestone leads to the formation of hemicarboaluminate and monocarboaluminate. Increasing the ratio between sulfate and aluminate decreases the extent of limestone reaction.

36 MATERIALS SCIENCE↗

Alternative cement clinkers

This article reviews proposed technical approaches for the manufacture and use of alternatives to Portland Cement Clinker as the main reactive binder component for ordinary concrete construction in non-specialty applications, while giving lower net global CO{sub 2} emissions in use. A critical analysis, taking into account a wide range of technical considerations, suggests that, with the exception of alkali-activated systems, (treated in a separate paper in this issue,) there are only four classes of alternative clinker system that deserve serious attention with respect to global reductions in concrete-related CO{sub 2} emissions:(A)Reactive Belite-rich Portland cement (RBPC) clinkers (B)Belite-Ye'elimite-Ferrite (BYF) clinkers (C)Carbonatable Calcium Silicate clinkers (CCSC) (D)Magnesium Oxides derived from Magnesium Silicates (MOMS) A and B are “hydraulic” clinkers, (i.e. clinkers which harden by reaction with water,) C is a “carbonatable” clinker, (i.e. one which hardens by reaction with CO{sub 2} gas) and D can fall into both categories.

36 MATERIALS SCIENCE↗