Search NASA⌕ Search

SEARCH · Search NASA

Results for “catalyst loading”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

XPS and STEM Study of the Interface Formation between Ultra-Thin Ru and Ir OER Catalyst Layers and Perylene Red Support Whiskers

The interface formation between perylene red (PR) and ruthenium or iridium OER catalysts has been studied systematically by XPS and STEM. The OER catalyst over-layers with thicknesses ranging from ~0.1 to ~50 nm were vapor deposited onto PR ex-situ. As seen by STEM, Ru and Ir form into nanoparticles, which agglomerate with increased loading. XPS data show a strong interaction between Ru and PR. Ir also interacts with PR although not to the extent seen for Ru. At low coverages, the entire Ru deposit is in the reacted state while a small portion of the deposited Ir remains metallic. Ru and Ir bonding occur at the PR carbonyl sites as evidenced by the attenuation of carbonyl photoemission and the emergence of new peak assigned to C-O single bond. The curve fitting analysis and the derived stoichiometry indicates the formation of metallo-organic bonds. The co-existence of oxide bonds is also apparent.

Atanasoska, Liliana↗

Highly ordered Zn-doped mesoporous silica: An efficient catalyst for transesterification reaction

Designing highly ordered material with nanoscale periodicity is of great significance in the field of solid state chemistry. Herein, we report the synthesis of highly ordered 2D-hexagonal mesoporous zinc-doped silica using a mixture of anionic and cationic surfactants under hydrothermal conditions. Powder XRD, N{sub 2} sorption, TEM analysis revealed highly ordered 2D-hexagonal arrangements of the pores with very good surface area (762 m{sup 2} g{sup -1}) in this Zn-rich mesoporous material. Chemical analysis shows very high loading of zinc (ca. 12.0 wt%) in the material together with retention of hexagonal pore structure. Interestingly, high temperature calcination resulted into zinc silicate phase, unlike any ZnO phase, which otherwise is expected under heat treatments. High surface area together with Zn loading in this mesoporous material has been found useful for the catalytic activity of the materials in the acid-catalyzed transesterification reactions of various esters under mild liquid phase conditions. - Graphical abstract: Zn-rich 2D-hexagonal mesoporous materials are synthesized hydrothermally, which show very good catalytic activity in the transesterification reaction under mild liquid phase reaction conditions. Highlights: > Zn-rich 2D-hexagonal mesoporous silica. > High surface area material. > Efficient catalyst in liquid phase transesterification reaction. > Biodiesel production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Highly durable fuel cell electrocatalyst with low-loading Pt-Co nanoparticles dispersed over single-atom Pt-Co-N-Graphene nanofiber

The limited durability of Pt electrocatalysis toward cathodic oxygen reduction reaction remains challenging, yet crucial for the development of Proton Exchange Membrane Fuel Cell. Here, we present a rational design of a robust catalyst consisting of PtCo nanoparticles supported on Pt-Co-N-graphene nanofiber prepared through electrospun Cobalt-Metal-Organic-Framework. The catalyst delivers unprecedented mass activity of 2.48 A·mgPt -1 , and retains 80% of initial value after 60,000 Accelerated-Stress-Test cycles. Operando X-ray absorption spectroscopies show that the electronic configurations of Pt sites in PtCo and Co sites in Co-N4 in the hybrid catalyst are modified toward high catalytic activities. Density Functional Theory unveils that the enhanced curvature of the substrate induced by the morphology engineering lowers the reaction thermodynamic barrier on Co-N4 sites, favoring the formation of H2O and suppressing that of H2O2. This result along with the strong affinity of PtCo nanoparticles to the Pt-Co-N-graphene fiber endows the catalyst an exceptional durability.

acidic electrolyte↗

Emerging Electrochemical Techniques for Probing Site Behavior in Single-Atom Electrocatalysts

Single-atom catalysts (SACs) have aroused tremendous interest over the past decade, particularly in the community of energy and environment-related electrocatalysis. A rapidly growing number of recent publications have recognized it as a promising candidate with maximum atomic utilization, distinct activity, and selectivity in comparison to bulk catalysts and nanocatalysts. However, the complexity of localized coordination environments and the dispersion of isolated sites lead to significant difficulties when it comes to gaining insight into the intrinsic behavior of electrocatalytic reactions. Furthermore, the low metal loadings of most SACs make conventional ensemble measurements less likely to be accurate on the subnanoscale. Thus, it remains challenging to probe the activity and properties of individual atomic sites by available commercial instruments and analytical methods. In spite of this, continuing efforts have lately focused on the development of advanced measurement methodologies, which are very useful to the fundamental understanding of SACs. There have recently been a number of in situ/operando techniques applied to SACs, such as electron microscopy, spectroscopy, and other analysis methods, which support relevant functions to identify the active sites and reaction intermediates and to investigate the dynamic behavior of localized structures of the catalytic sites. This Account aims to present recent electrochemical probing techniques which can be used to identify single-atomic catalytic sites within solid supports. First, we describe the basic principles of molecular probe methods for the study and analysis of electrocatalytic site behavior. In particular, the in situ probing technique enabled by surface interrogation scanning electrochemical microscopy (SISECM) can measure the active site density and kinetic rate with high resolution. An alternative electrochemical probing technique is further demonstrated on the basis of single-entity electrochemistry, which allows the unique electrochemical imaging of the size and catalytic rate of single atoms, molecules, and clusters. Next, the merits and limitations of different electrochemical techniques are then discussed, along with perspectives for future prospects. Apart from this, we further showcase the powerful capability of emerging electrochemical probing techniques for determining significant effects and properties of SACs for various electrocatalytic reactions, including oxygen reduction and evolution, hydrogen evolution, and nitrate reduction. Overall, electrochemical techniques with atomic resolution have greatly increased opportunities for observing, measuring, and understanding the surface and interface chemistry during energy conversion. In the future, it is anticipated that the development of electrochemical probing techniques will be advanced with innovative perspectives on the behavior and features of SACs. We hope that this Account can contribute in several ways to promoting the fundamental knowledge and technical progress of emerging electrochemical measurements for studying SACs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ice-Crystallization Kinetics in the Catalyst Layer of a Proton-Exchange-Membrane Fuel Cell

Nucleation and growth of ice in the catalyst layer of a proton-exchange-membrane fuel cell (PEMFC) are investigated using isothermal differential scanning calorimetry and isothermal galvanostatic cold-starts. Isothermal ice-crystallization rates and ice-nucleation rates are obtained from heat-flow and induction-time measurements at temperatures between 240 and 273 K for four commercial carbon-support materials with varying ionomer fraction and platinum loading. Measured induction times follow expected trends from classical nucleation theory and reveal that the carbon-support material and ionomer fraction strongly impact the onset of ice crystallization. Conversely, dispersed platinum particles play little role in ice crystallization. Following our previous approach, a nonlinear ice-crystallization rate expression is obtained from Johnson-Mehl-Avrami-Kolmogorov (JMAK) theory. A validated rate expression is now available for predicting ice crystallization within water-saturated catalyst layers. Using a simplified PEMFC isothermal cold-start continuum model, we compare cell-failure time predicted using the newly obtained rate expression to that predicted using a traditional thermodynamic-based approach. From this comparison, we identify conditions under which including ice-crystallization kinetics is critical and elucidate the impact of freezing kinetics on low-temperature PEMFC operation. The numerical model illustrates that cell-failure time increases with increasing temperature due to a longer required time for ice nucleation. Hence, ice-crystallization kinetics is critical when induction times are long (i.e., in the "nucleation-limited" regime for T > 263 K). Cell-failure times predicted using ice-freezing kinetics are in good agreement with the isothermal cold-starts, which also exhibit long and distributed cell-failure times for T > 263 K. These findings demonstrate a significant departure from cell-failure times predicted using the thermodynamic-based approach.

Dursch, T. J.↗

Chemical Grafting of Highly Dispersed VO x /CeO 2 for Increased Catalytic Activity in Methanol Oxidative Dehydrogenation

Vanadia supported on well-defned ceria nanocubes are synthesized at various loadings using a liquid-phase chemical grafting technique and are compared to those prepared using traditional incipient wetness impregnation. Raman and IR characterization reveal that, as vanadia loading is increased to near monolayer coverage, vanadia deposited using grafting shows greatly enhanced dispersion (i.e., improved VO x monomer/dimer distribution). Methanol is used as a probe molecule to explore the redox behavior of the catalysts. IR and temperature programmed desorption of methanol show increased CO 2 formation occurs on the bare ceria support and increasing the dispersion of vanadia promotes dehydrogenation to formaldehyde due to the inhibited oxygen vacancy formation on VO x /CeO 2 . Hydrogen temperature programmed reduction demonstrates that the catalyst reducibility and formation of surface oxygen vacancy are directly related to the degree of vanadia oligomerization. In conclusion, the samples prepared using grafting exhibit superior catalytic performance for methanol oxidative dehydrogenation to formaldehyde compared to the impregnated samples, due to the presence of highly dispersed VO x species (i.e., monomers and dimers).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Elucidating the interaction between Ni and CeO x in ethanol steam reforming catalysts: A perspective of recent studies over model and powder systems

Bulk metallic nickel is a poor catalyst for the reforming of oxygenates being deactivated by the deposition of coke. In contrast, Ni-ceria is an active system for the catalytic extraction of H2 from the ethanol steam reforming reaction (ESR, C 2 H 5 OH + 3H 2 O ↔ 2CO 2 + 6H 2 ). Numerous studies, with model (well-defined crystal surfaces) and technical (high surface area powders) catalysts, have been devoted to understand the fundamental role of each catalyst component, the performance of adjacent sites in the metal-oxide interface, and the complex mechanistic steps that convert two oxygenated reactants (ethanol and H 2 O) into H 2 . The size and low loading of Ni on ceria facilitate metal-oxide support interactions that probably enhance the reactivity of the system. To establish the precise role of both Ni and Ce is challenging. However it is clear that both Ni and Ce are associated with the dissociation of H 2 O (OH + H), while ceria readily adsorbs and partially dissociates ethanol (i.e. ethoxy formation). The most difficult step of Csingle bondC bond dissociation likely occurs only on Ni or at the Ni-Ce interface. H 2 O and OH remain as important agents for the prevention of excess C build up during the C—H/C—C dissociation process. Often, deactivation upon C build up, is a direct result of Ni sintering and decoupling of the Ni-Ce interactions. One strategy to maintain good activity and stability is to protect the Ni-Ce interaction, and this can be achieved through the use of solid solutions (Ce 1–x Ni x O 2–y ) or by employing stabilizing agents such as W (Ni x W y Ce z O 2 ). In this study, we present and discuss the most recent work for the ESR reaction and show the important role of ceria which participates directly in the reaction and also enhances catalytic activity through metal-support interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multi-wavelength Raman Spectroscopic Study of Silica-supported Vanadium Oxide Catalysts

The molecular structure of silica-supported vanadium oxide (VOx) catalysts over wide range of surface VOx density (0.0002 8 V/nm2) has been investigated in detail under dehydrated condition by in situ multi-wavelength Raman spectroscopy (laser excitations at 244, 325, 442, 532, and 633 nm) and in situ UV-Vis diffuse reflectance spectroscopy. Resonance Raman scattering is clearly observed using 244 and 325-nm excitations while normal Raman scattering occurs using excitation at the three visible wavelengths. The observation of strong fundamentals, overtones and combinational bands due to selective resonance enhancement effect helps clarify assignments of some of the VOx Raman bands (920, 1032, and 1060 cm-1) whose assignments have been controversial. The resonance Raman spectra of dehydrated VOx/SiO2 show V=O band at smaller Raman shift than that in visible Raman spectra, an indication of the presence of two different surface VOx species on dehydrated SiO2 even at sub-monolayer VOx loading. Quantitative estimation shows that the two different monomeric VOx species coexist on silica surface from very low VOx loadings and transform to crystalline V2O5 at VOx loadings above monolayer. It is postulated that one of the two monomeric VOx species has pyramidal structure and the other is in partially hydroxylated pyramidal mode. The two VOx species show similar reduction-oxidation behavior and may both participate in redox reactions catalyzed by VOx/SiO2 catalysts. This study demonstrates the advantages of multi-wavelength Raman spectroscopy over conventional single-wavelength Raman spectroscopy in structural characterization of supported metal oxide catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rate Controlling in Low-Temperature Standard NH 3 -SCR: Implications from Operando EPR Spectroscopy and Reaction Kinetics

Here, a series of seven Cu/SSZ-13 catalysts with Si/Al = 6.7 are used to elucidate key rate-controlling factors during low-temperature standard ammonia-selective catalytic reduction (NH 3 -SCR), via a combination of SCR kinetics and operando electron paramagnetic resonance (EPR) spectroscopy. Strong Cu-loading-dependent kinetics, with Cu atomic efficiency increasing nearly by an order of magnitude, is found when per chabazite cage occupancy for Cu ion increases from ~0.04 to ~0.3. This is due mainly to the release of intercage Cu transfer constraints that facilitates the redox chemistry, as evidenced from detailed Arrhenius analysis. Operando EPR spectroscopy studies reveal strong connectivity between Cu-ion dynamics and SCR kinetics, based on which it is concluded that under low-temperature steady-state SCR, kinetically most relevant Cu species are those with the highest intercage mobility. Transient binuclear Cu species are mechanistically relevant species, but their splitting and cohabitation are indispensable for low-temperature kinetics.

catalytic reactions↗

Potential-Sensing Electrochemical AFM Shows CoPi as a Hole Collector and Oxygen Evolution Catalyst on BiVO 4 Water-Splitting Photoanodes

Oxide/(oxy)hydroxide overlayers such as cobalt (oxy)hydroxide phosphate (CoPi) enhance the performance of BiVO 4 water-spitting photoanodes, but the mechanism of this enhancement remains unclear. Iin this work, we show that if the BiVO 4 layer is thin and incompletely covers an underlying conductive glass, the performance dramatically decreases as CoPi loading is increased. This is consistent with direct contact between the CoPi and conducting glass that leads to “shunt” recombination of photogenerated holes accumulated in the CoPi. For thicker BiVO4 layers that completely cover the conducting glass, these shunt pathways are blocked. We then use a nanoelectrode atomic force microscopy probe to measure, in operando, the electrochemical potential of CoPi on thick BiVO4 films under illumination. We find that CoPi is charged to a potential necessary to drive water oxidation at a rate consistent with the measured photocurrent. CoPi acts as a hole collector and is the principal driver of water oxidation on BiVO 4 .

14 SOLAR ENERGY↗

L-Phenylalanine-Templated Platinum Catalyst with Enhanced Performance for Oxygen Reduction Reaction

Pt-based materials are the most efficient catalysts for the oxygen reduction reaction (ORR) in proton exchange membrane fuel cells. However, fabrication of active and stable Pt catalysts still remains challenging. In this work, Pt-L-phenylalanine (Pt-LPHE) films, with highly dispersed Pt nanoparticles (NPs) featuring predominately (111) facets, have been prepared via a room temperature electron reduction (RTER) method. Loading Pt-LPHE onto carbon support produces a novel nanomaterial (Pt-AL/C), resulting in a simultaneous loading of highly dispersed Pt NPs and N-doping. Density functional theory (DFT) calculations demonstrate that the N dopants stabilize the Pt NPs and reduce the *O/*OH binding energies on the Pt NPs. As a result, the Pt-AL/C nanomaterial shows significantly enhanced ORR activity and stability over commercial Pt/C after 10,000-cycle stability tests. This work provides a novel eco-friendly and energy neutral approach for preparing metal NPs with controllable structures and sizes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Regulating the spatial distribution of metal nanoparticles within metal-organic frameworks to enhance catalytic efficiency

Composites incorporating metal nanoparticles (MNPs) within metal-organic frameworks (MOFs) have broad applications in many fields. However, the controlled spatial distribution of the MNPs within MOFs remains a challenge for addressing key issues in catalysis, for example, the efficiency of catalysts due to the limitation of molecular diffusion within MOF channels. We report a facile strategy that enables MNPs to be encapsulated into MOFs with controllable spatial localization by using metal oxide both as support to load MNPs and as a sacrificial template to grow MOFs. This strategy is versatile to a variety of MNPs and MOF crystals. By localizing the encapsulated MNPs closer to the surface of MOFs, the resultant MNPs@MOF composites not only exhibit effective selectivity derived from MOF cavities, but also enhanced catalytic activity due to the spatial regulation of MNPs as close as possible to the MOF surface.

36 MATERIALS SCIENCE↗

Molybdenum Carbides, Active and In Situ Regenerable Catalysts in Hydroprocessing of Fast Pyrolysis Bio-Oil

We assessed molybdenum carbides as a potential catalyst for fast pyrolysis bio-oil hydroprocessing. Currently, high catalyst cost, short catalyst lifetime, and lack of effective regeneration methods are hampering the development of this otherwise attractive renewable hydrocarbon technology. A series of metal-doped bulk Mo carbides were synthesized, characterized and evaluated in sequential low-temperature stabilization and high-temperature deoxygenation of a pine-derived bio-oil. During a typical 60-h run, Mo carbides were capable of upgrading raw bio-oil to a level suitable for direct insertion into the current hydrocarbon infrastructure with residual oxygen content and total acid number of upgraded oils below 2 wt% and 0.01 mg KOH g-1, respectively. The performance was shown to be sensitive to the type of metal dopant, Ni-doped Mo carbides outperforming Co-, Cu-, or Ca-doped counterparts; a higher Ni loading led to a superior catalytic performance. No bulk oxidation or other significant structural changes were observed. Besides the structural robustness, another attractive property of Mo carbides was in situ regenerability. The effectiveness of regeneration was demonstrated by successfully carrying out four consecutive 60-h runs with a reductive decoking between two adjacent runs. These results strongly suggest that Mo carbides are promising catalytic materials which could lead to a significant cost reduction in hydroprocessing bio-oils. This paper highlights areas for future research which will be needed to further understand carbide structure-function relationships and help design practical bio-oil upgrading catalysts based on Mo carbides.

Choi, Jae-Soon↗

Impacts of Mid-level Biofuel Content in Gasoline on SIDI Engine-Out and Tailpipe Particulate Matter Emissions: Preprint

The influences of ethanol and iso-butanol blended with gasoline on engine-out and post Three-Way Catalyst (TWC) particle size distribution and number concentration were studied using a GM 2.0L turbocharged Spark Ignition Direct Injection (SIDI) engine. The engine was operated using the production ECU with a dynamometer controlling the engine speed and the accelerator pedal position controllingthe engine load. A TSI Fast Mobility Particle Sizer (FMPS) spectrometer was used to measure the particle size distribution in the range from 5.6 to 560 nm with a sampling rate of 1 Hz. US federal certification gasoline (E0), two ethanol-blended fuels (E10 and E20), and 11.7% iso-butanol blended fuel (BU12) were tested. Measurements were conducted at ten selected steady-state engine operationconditions. Bi-modal particle size distributions were observed for all operating conditions with peak values at particle sizes of 10 nm and 70 nm. Idle and low speed / low load conditions emitted higher total particle numbers than other operating conditions. At idle, the engine-out Particulate Matter (PM) emissions were dominated by nucleation mode particles, and the production TWC reduced thesenucleation mode particles by more than 50%, while leaving the accumulation mode particle distribution unchanged. At engine load higher than 6 bar NMEP, accumulation mode particles dominated the engine-out particle emissions and the TWC had little effect. Compared to the baseline gasoline (E0), E10 does not significantly change PM emissions, while E20 and BU12 both reduce PM emissions under theconditions studied. Iso-butanol was observed to impact PM emissions more than ethanol, with up to 50% reductions at some conditions. In this paper, the issues related to PM measurement using FMPS are also discussed. While some uncertainties are due to engine variation, the FMPS must be operated under careful maintenance procedures in order to achieve repeatable measurement results.

02 PETROLEUM↗

Effect of cell compression on the performance and the structure of proton exchange membrane water electrolyzer (PEMWE) assembly

Here, in the field of water electrolysis, the proton exchange membrane water electrolyzer (PEMWE) is currently the most advanced technology for producing hydrogen without emitting CO 2 . Although PEMWE plants are already in operation, further research is needed to improve cell efficiency and reduce the use of rare materials, such as iridium oxide catalysts for the oxygen evolution reaction (OER). One of the main causes of performance loss in PEMWE is the relatively low electric conductivity of the porous transport layer (PTL) and of the anode catalyst layer, which results in ohmic losses and low catalyst utilization during high current density operation. The objective of this study is to investigate how optimization of the PTL and electrode interface can increase the cell performance. To this end, we tested different cell assemblies using fibrous and sintered PTLs, decreasing membrane thickness, reducing iridium loading, and inserting a microporous layer to increase contact surface area. Electrochemical characterization of each cell configuration was systematically performed at various compression levels as the pressure is a crucial parameter influencing the electrode/PTL contact area. In parallel, X-ray microcomputed tomography (micro-CT) was employed to investigate the effects of cell hydration and compression on the structure of PEMWE components. This study combining electrochemistry and micro-CT imaging presents how optimizing the electrode/PTL contact surface area, minimizes ohmic losses, and enables PEMWE operation with low iridium loading at high current densities.

Catalyst - PTL interface↗

Low Noble Metal Content Catalysts/Electrodes for Hydrogen Production by Water Electrolysis, Phase II 2013-2015: Anode catalysts/electrodes development at Brookhaven National Laboratory

BNL’s efforts in Phase II are mainly on developing anode catalysts/electrodes with a target of 80% reduction of IrO 2 loading to about 0.8 mg cm -2 without compromising the performance as compared to the baseline. In carrying out the first task, we found insufficient benefits from using either TiO 2 or CsO 2 as support for our synthesized Ru@Ir core-shell nanocatalysts. The supports also add variables and uncertainties in experiments, making in-depth analyses difficult. Thus, we chose to go with unsupported catalysts. The second task/milestone of fabricating gas diffusion electrodes (GDEs) with uniform and robust catalyst layers was completed. Along the way we established a procedure for testing anode GDEs for oxygen evolution reaction (OER) in a solution electrochemical cell. As detailed in the 2014 report, the baseline in solution test allowed us to prescreen and optimize GDE samples before more costly membrane electrode assembly (MEA) test and to obtain iR-corrected OER polarization curves for kinetic analysis. In this final report, we summarize the results of two most promising approaches in developing low-Ir-loading anodes.

99 GENERAL AND MISCELLANEOUS↗