Search NASA⌕ Search

SEARCH · Search NASA

Results for “computer program”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Evaluation of the three-dimensional parabolic flow computer program SHIP

The three-dimensional parabolic flow program SHIP designed for predicting supersonic combustor flow fields is evaluated to determine its capabilities. The mathematical foundation and numerical procedure are reviewed; simplifications are pointed out and commented upon. The program is then evaluated numerically by applying it to several subsonic and supersonic, turbulent, reacting and nonreacting flow problems. Computational results are compared with available experimental or other analytical data. Good agreements are obtained when the simplifications on which the program is based are justified. Limitations of the program and the needs for improvement and extension are pointed out. The present three dimensional parabolic flow program appears to be potentially useful for the development of supersonic combustors.

Pan, Y. S.↗
NASA NTRS1967

Operations programming

Computer programming technology and Surveyor software system, for deep space network

SURVEYOR PROJECT↗
NASA NTRS1987

Fast-Polynomial-Transform Program

Computer program uses fast-polynomial-transformation (FPT) algorithm applicable to two-dimensional mathematical convolutions. Two-dimensional cyclic convolutions converted to one-dimensional convolutions in polynomial rings. Program decomposes cyclic polynomials into polynomial convolutions of same length. Only FPT's and fast Fourier transforms of same length required. Modular approach saves computional resources. Program written in C.

Truong, T. K.↗
NASA NTRS1967

Radiation pattern programs

Computer programs for numerically evaluating scalar far field radiation pattern integral, and obtaining secondary radiation pattern of large paraboloidal antenna

ANTENNA↗
NASA NTRS1967

Phase-center program

Computer program to determine E and H plane phase centers of electromagnetic wave fields scattered from surfaces of revolution

ELECTROMAGNETIC WAVE↗
NASA NTRS1967

Computer program for optical systems ray tracing

Program traces rays of light through optical systems consisting of up to 65 different optical surfaces and computes the aberrations. For design purposes, paraxial tracings with astigmation and third order tracings are provided.

Ferguson, T. J.↗
NASA NTRS1978

User's guide to computer programs JET 5A and CIVM-JET 5B to calculate the large elastic-plastic dynamically-induced deformations of multilayer partial and/or complete structural rings

These structural ring deflections lie essentially in one plane and, hence, are called two-dimensional (2-d). The structural rings may be complete or partial; the former may be regarded as representing a fragment containment ring while the latter may be viewed as a 2-d fragment-deflector structure. These two types of rings may be either free or supported in various ways (pinned-fixed, locally clamped, elastic-foundation supported, mounting-bracket supported, etc.). The initial geometry of each ring may be circular or arbitrarily curved; uniform-thickness or variable-thickness rings may be analyzed. Strain-hardening and strain-rate effects of initially-isotropic material are taken into account. An approximate analysis utilizing kinetic energy and momentum conservation relations is used to predict the after-impact velocities of each fragment and of the impact-affected region of the ring; this procedure is termed the collision-imparted velocity method (CIVM) and is used in the CIVM-JET 5 B program. This imparted-velocity information is used in conjunction with a finite-element structural response computation code to predict the transient, large-deflection, elastic-plastic responses of the ring. Similarly, the equations of motion of each fragment are solved in small steps in time. Provisions are made in the CIVM-JET 5B code to analyze structural ring response to impact attack by from 1 to 3 fragments, each with its own size, mass, translational velocity components, and rotational velocity. The effects of friction between each fragment and the impacted ring are included.

Wu, R. W. H.↗
NASA NTRS1982

The CMC/3DPNS computer program for prediction of three-dimensional, subsonic, turbulent aerodynamic juncture region flow. Volume 3: Programmers' manual

The CMC fluid mechanics program system was developed to transmit the theoretical evolution of finite element numerical solution methodology, applied to nonlinear field problems into a versatile computer code for comprehensive flow field analysis. A detailed view of the code from the standpoint of a computer programmer's use is presented. A system macroflow chart and detailed flow charts of several routines necessary to interact with a theoretican/user to modify the operation of this program are presented. All subroutines and details of usage, primarily for input and output routines are described. Integer and real scalars and a cross reference list denoting subroutine usage for these scalars are outlined. Entry points in dynamic storage vector IZ; the lengths of each vector accompanying the scalar definitions are described. A listing of the routines peculiar to the standard test case and a listing of the input deck and printout for this case are included.

Orzechowski, J. A.↗
NASA NTRS1981

VORCAM: A computer program for calculating vortex lift effect of cambered wings by the suction analogy

A user's guide to an improved version of Woodward's chord plane aerodynamic panel computer code is presumed. The guide can be applied to cambered wings exhibiting edge separated flow, including those with leading edge vortex flow at subsonic and supersonic speeds. New orientations for the rotated suction force are employed based on the momentum principal. The supersonic suction analogy method is improved by using an effective angle of attack defined through a semiempirical method.

Lan, C. E.↗
NASA NTRS1970

FASTER 3: A generalized-geometry Monte Carlo computer program for the transport of neutrons and gamma rays. Volume 2: Users manual

A description of the FASTER-III program for Monte Carlo Carlo calculation of photon and neutron transport in complex geometries is presented. Major revisions include the capability of calculating minimum weight shield configurations for primary and secondary radiation and optimal importance sampling parameters. The program description includes a users manual describing the preparation of input data cards, the printout from a sample problem including the data card images, definitions of Fortran variables, the program logic, and the control cards required to run on the IBM 7094, IBM 360, UNIVAC 1108 and CDC 6600 computers.

Jordan, T. M.↗
DOE OSTI2024

System, method, and computer program for creating geometry-compliant lattice structures

A system and method of creating a shape-conforming lattice structure for a part formed via additive manufacturing. The method includes receiving a computer model of the part and generating a finite element mesh. A lattice structure including a number of lattice cellular components may also be generated. Some of the mesh elements of the finite element mesh may be deformed so that the finite element mesh conforms to the overall shape of the part. The lattice structure may then be deformed so that the lattice structure has a cellular periodicity corresponding to the finite elements of the finite element mesh. In this way, the part retains the benefits of its overall shape and the benefits of lattice features without introducing structural weak points, directional stresses, and other structural deficiencies.

Vernon, Gregory John↗
NASA NTRS1972

Computer programs for plotting curves with various dashed-line sequences

Two FORTRAN-callable subprograms have been written to draw a smooth curve through a set of input points as a solid line or as a general sequence of long and short dashes. Subroutine LINSEQ draws conventional curves whereas subroutine CONSEQ draws smooth closed curves (contours). The subprograms are based on an approximate calculation of the arc length along the curve and spline interpolation along the arc length. Options are provided for smoothing of the input data and for offsetting the plotted curve from the input data points. The method of calculation of the arc length and the generation of the line sequence are described.Usage descriptions of the main subprograms, sample calling programs illustrating the various features of the subprograms, and sample plots are given. The subroutines should be readily adaptable to almost any computer-driven incremental plotter.

Desmarais, R. N.↗
NASA NTRS1982

The CMC/3DPNS computer program for prediction of three-dimension, subsonic, turbulent aerodynamic juncture region flow. Volume 2: Users' manual

The CMC fluid mechanics program system was developed to transmit the theoretical solution of finite element numerical solution methodology, applied to nonlinear field problems into a versatile computer code for comprehensive flow field analysis. Data procedures for the CMC 3 dimensional Parabolic Navier-Stokes (PNS) algorithm are presented. General data procedures a juncture corner flow standard test case data deck is described. A listing of the data deck and an explanation of grid generation methodology are presented. Tabulations of all commands and variables available to the user are described. These are in alphabetical order with cross reference numbers which refer to storage addresses.

Manhardt, P. D.↗
NASA NTRS1975

Technique and computer program for calculating photographic film density variations

Film density data that have been digitalized and recorded in binary coded decimal (BCD) format are converted into a number representing the film density difference between the unexposed film border and any point on a photograph by program CONVERT. The difference AVERAGE, the BCD number representing the unexposed film area and the BCD number of a specific data point is calculated and then multiplied by three constants to produce the desired film density difference. The angle off the principal axis of the lens is computed for each data point in order that a correction factor be applied to compensate for atmospheric backscattering differences and light intensity fall-off, inherent in the camera lens system in use. The program is capable of plotting the calculated density differences. The percentage of points in specific density ranges can also be computed.

Ohlhorst, C. W.↗