Search NASA⌕ Search

SEARCH · Search NASA

Results for “development studies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Development of a solid propellant viscoelastic dynamic model

The results of a one year study to develop a dynamic response model for the Space Shuttle Solid Rocket Motor (SRM) propellant are presented. An extensive literature survey was conducted, from which it was concluded that the only significant variables affecting the dynamic response of the SRM propellant are temperature and frequency. Based on this study, and experimental data on propellants related to the SRM propellant, a dynamic constitutive model was developed in the form of a simple power law with temperature incorporated in the form of a modified power law. A computer program was generated which performs a least-squares curve-fit of laboratory data to determine the model parameters and it calculates dynamic moduli at any desired temperature and frequency. Additional studies investigated dynamic scaling laws and the extent of coupling between the SRM propellant and motor cases. It was found, in agreement with other investigations, that the propellant provides all of the mass and damping characteristics whereas the case provides all of the stiffness.

Hufferd, W. L.↗
DOE OSTI2021

Effect of a novel starch-based temperature rise inhibitor on cement hydration and microstructure development: The second peak study

Temperature rise inhibitor (TRI) modifies the exothermic process of cement hydration at early age and mitigates the buildup of cumulative heat, which sheds new light on solving the thermal cracking issue. After the main hydration peak, a broader “second peak” appears and brings the cumulative heat back to normal level within 7 days (for additions less than 0.15%). This study shows that the “second peak” can be attributed, almost exclusively, to C{sub 3}S hydration while triggered by C{sub 3}A hydration. In a pure C{sub 3}S system, the heat flow is depressed by TRI during the main hydration peak but never recovers after. In a monophase system composed of C{sub 3}S, C{sub 3}A and gypsum or a real cement paste, the ongoing precipitation of ettringite helps to pump out TRI polymer from the pore solution and eliminate the restriction on C-S-H nucleation. Afterwards, the precipitation of C-S-H accelerates again to form the “second peak”.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Twistronics of Janus transition metal dichalcogenide bilayers

Twisted multilayers of two-dimensional (2D) materials are an increasingly important platform for investigating quantum phases of matter, and in particular, strongly correlated electrons. The moiré pattern introduced by the relative twist between layers creates effective potentials of long wavelength, leading to electron localization. However, in contrast to the abundance of 2D materials, few twisted heterostructures have been studied until now. Here, in this study, we develop a first-principles continuum theory to study the electronic bands introduced by moire patterns of twisted Janus transition metal dichalcogenide (TMD) homo- and heterobilayers. The model includes lattice relaxation, stacking-dependent effective mass, and Rashba spin-orbit coupling. We then perform a high-throughput generation and characterization of DFT-extracted continuum models for more than a hundred possible combinations of materials and stackings. Our model predicts that the moiré physics and emergent symmetries depend on chemical composition, vertical layer orientation, and twist angle, so that the miniband wave functions can form triangular, honeycomb, and kagome networks. Rashba spin-orbit effects, peculiar of these systems, can dominate the moiré bandwidth at small angles. Our work enables detailed investigation of Janus twisted heterostructures, allowing the discovery and control of novel electronic phenomena.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Enabling Smart Grid Cosimulation Studies: Rapid Design and Development of the Technologies and Controls

The 21st century electric power grid is transforming with an unprecedented increase in demand and increase in new technologies. In the United States Energy Independence and Security Act of 2007, Title XIII sets the tenets for modernizing the electricity grid through what is known as the 'Smart Grid Initiative.' This initiative calls for increased design, deployment, and integration of distributed energy resources, smart technologies and appliances, and advanced storage devices. The deployment of these new technologies requires rethinking and re-engineering the traditional boundaries between different electric power system domains.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2016

Scoping Study on Research and Development Priorities for Distribution-System Phasor Measurement Units

This report addresses the potential use of phasor measurement units (PMUs) within electricity distribution systems, and was written to assess whether or not PMUs could provide significant benefit, at the national level. We analyze examples of present and emerging distribution-system issues related to reliability, integration of distributed energy resources, and the changing electrical characteristics of load. We find that PMUs offer important and irreplaceable advantages over present approaches. However, we also find that additional research and development for standards, testing and calibration, demonstration projects, and information sharing is needed to help industry capture these benefits.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2020

“Mirror” magnet experiment for quench studies, quench analysis techniques development and in support of superconducting magnet modeling

In order to progress on various research points related to superconducting magnets, we suggest performing series of tests with induced and natural quenches on a mirror magnet, probably using a “11 T” coil. The “mirror” is to have voltage taps instrumented on half the strands, on both coil ends. It is to be instrumented with multiple spot-heaters, of the order of ten, in designated pole-turn areas. Instrumentation is to include quench antenna array facing the inner coil surface, as well as acoustic sensors on the inner layer pole. Further, acoustic sensors at the magnet ends and an acoustic calibration transducer are to be installed. Thus, we are to test sensitivity and precision of acoustic and quench antenna (QA) array sensors, both at close proximity to the coil, and we are to test and commission acoustic on-magnet real-time “calibration”. New or extended DAQ will be tested as well. In addition to diagnostic development, the purpose of the magnet experiment is to investigate current redistribution in the coil, both during quenching and in operating conditions; to assess voltage build up across strands and in the coil segments during quenching, to explore voltage signature differentiation between different type of quenches; to improve modeling of processes during quenching and for magnet design purposes. In this experiment, we expect to be able to characterize the processes during a quench in unprecedented details.

43 PARTICLE ACCELERATORS↗
DOE OSTI2021

Methods for Estimating Dose from Galactic Cosmic Rays and Jovian Radiation Belts on Reduced-Order Monte Carlo Geometries

This document outlines the methods and tools developed to estimate dose rates from galactic cosmic rays and the trapped radiation belts surrounding Jupiter using Monte Carlo particle transport software. Furthermore, the techniques described here are specific for translating high-resolution MAVRIC models to analogous but lower resolution Monte Carlo N-Particle Transport (MCNP) code models to estimate charged particle effects on models originally developed to study neutral particles only. This capability was initially developed to predict doses to various components of dynamic radioisotope power systems for spaceflight applications, but the tools and methods can be easily applied to other problem geometries and expanded to other space radiation environments.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

Flow Reactor Study and Kinetic Model Development of HEFA-SPK and its Surrogate

In this work, we formulate a two-component surrogate for HEFA-SPK, incorporating aromatic or cycloalkane components, and develop reduced kinetic models for the surrogates to be used in high-performance computing simulations. The HEFA-SPK surrogate was selected and optimized based on the fuel's physical and combustion properties, including ignition delay times and flame speeds. The resulting surrogate consists of 40% n-undecane and 60% 2-methylnonane. The surrogate was confirmed by flow reactor experiments for both the HEFA-SPK fuel and the suggested two-component surrogates, where excellent agreement was observed. To meet aromatic requirements, 1,2,4-trimethylbenzene (8%) was selected, and we determined that incorporating 30% propylcyclohexane into the HEFA-SPK will achieve a volume swell equivalent to 8% aromatics. The properties of the surrogates were measured, and a new reduced kinetic model was developed based on the semi-decoupling methodology, using a reduced CH4 chemistry from NUIG 1.0 as base chemistry. Kinetic models will be employed in combustor simulations to enable a comprehensive understanding of the effect of SAF fuel properties on aviation combustor performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Alabama Carbon Storage: Data Sharing and Engagement (Final Report)

This report is the final technical report on Alabama Carbon Storage: Data Sharing Engagement (ACS:DSE) project activities. The goals of the ACS:DSE project are to compile geologic, geophysical, infrastructure, and other relevant CCUS datasets for the study area and develop a geologic model of the study area; develop an online platform to serve data to stakeholders; engage with the public, students, and industry to educate them about CCUS and the data platform; and ensure energy and environmental justice is central to all aspects of the project. Datasets compiled and expanded include formation depths and elevations, digital geophysical well logs, reservoir properties, geologic structures, and geologic models. The geologic data were used to create a three-dimensional geologic model, structure grids, structure contour maps, and fault trace maps. In addition to downloadable datasets, links to CCUS relevant regulatory agencies (e.g., OGB, U.S. Environmental Protection Agency) and sources for infrastructure and educational information were included on the website Educational materials on CCUS for use by K-12 teachers were produced as part of the ACS:DSE project.

01 COAL, LIGNITE, AND PEAT↗