Search NASA⌕ Search

SEARCH · Search NASA

Results for “doping effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

The Effects of Crystallinity on Charge Transport and the Structure of Sequentially Processed F 4 TCNQ‐Doped Conjugated Polymer Films

Abstract The properties of molecularly doped films of conjugated polymers are explored as the crystallinity of the polymer is systematically varied. Solution sequential processing (SqP) was used to introduce 2,3,5,6‐tetrafluoro‐7,7,8,8‐tetracyanoquinodimethane (F 4 TCNQ) into poly(3‐hexylthiophene‐2,5‐diyl) (P3HT) while preserving the pristine polymer's degree of crystallinity. X‐ray data suggest that F 4 TCNQ anions reside primarily in the amorphous regions of the film as well as in the P3HT lamellae between the side chains, but do not π‐stack within the polymer crystallites. Optical spectroscopy shows that the polaron absorption redshifts with increasing polymer crystallinity and increases in cross section. Theoretical modeling suggests that the polaron spectrum is inhomogeneously broadened by the presence of the anions, which reside on average 6–8 Å from the polymer backbone. Electrical measurements show that the conductivity of P3HT films doped by F 4 TCNQ via SqP can be improved by increasing the polymer crystallinity. AC magnetic field Hall measurements show that the increased conductivity results from improved mobility of the carriers with increasing crystallinity, reaching over 0.1 cm 2 V −1 s −1 in the most crystalline P3HT samples. Temperature‐dependent conductivity measurements show that polaron mobility in SqP‐doped P3HT is still dominated by hopping transport, but that more crystalline samples are on the edge of a transition to diffusive transport at room temperature.

Scholes, D. Tyler↗
DOE OSTI2018

Temperature and Humidity Stable Alkali/Alkaline-Earth Metal Carbonates as Electron Heterocontacts for Silicon Photovoltaics

Nanometer scale interfacial layers between the metal cathode and the n-type semiconductor play a critical role in enhancing the transport of charge carriers in and out of optoelectronic devices. In this research, a range of nanoscale alkali and alkaline earth metal carbonates (i.e., potassium, rubidium, caesium, calcium, strontium, and barium) are shown to function effectively as electron heterocontacts to lightly doped n-type crystalline silicon (c-Si), which is particularly challenging to contact with common metals. These carbonate interlayers are shown to enhance the performance of n-type c-Si proof-of-concept solar cells up to a power conversion efficiency of ≈19%. Furthermore, these devices are thermally stable up to 350 °C and both the caesium and barium carbonates pass a standard 1000 h damp heat test, with >95% of their initial performance maintained. The temperature and humidity stable electron heterocontacts based on alkali and alkaline earth metal carbonates show a high potential for industrial feasibility and longevity for deployment in the field.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Atomically Dispersed Molybdenum Catalysts for Efficient Ambient Nitrogen Fixation

Abstract NH 3 synthesis by the electrocatalytic N 2 reduction reaction (NRR) under ambient conditions is an appealing alternative to the currently employed industrial method—the Haber–Bosch process—that requires high temperature and pressure. We report single Mo atoms anchored to nitrogen‐doped porous carbon as a cost‐effective catalyst for the NRR. Benefiting from the optimally high density of active sites and hierarchically porous carbon frameworks, this catalyst achieves a high NH 3 yield rate (34.0±3.6 μg h −1 mg cat. −1 ) and a high Faradaic efficiency (14.6±1.6 %) in 0.1 m KOH at room temperature. These values are considerably higher compared to previously reported non‐precious‐metal electrocatalysts. Moreover, this catalyst displays no obvious current drop during a 50 000 s NRR, and high activity and durability are achieved in 0.1 m HCl. The findings provide a promising lead for the design of efficient and robust single‐atom non‐precious‐metal catalysts for the electrocatalytic NRR.

Han, Lili↗
DOE OSTI2022

Pushing Lithium–Sulfur Batteries towards Practical Working Conditions through a Cathode–Electrolyte Synergy

The commercialization of lithium-sulfur (Li-S) batteries is still hindered by the unsatisfactory cell performance under practical working conditions, which is mainly caused by the sluggish cathode redox kinetics, severe polysulfide shuttling, and poor Li striping/platting reversibility. We reported an effective strategy by combining Se-doped S hosted in an ordered macroporous framework with highly fluorinated ether (HFE)-based electrolyte to simultaneously address the aforementioned issues in both cathode and anode. A reversible and stable high areal capacity of > 5.4 mAh cm -2 with high coulombic efficiency > 99.2% can be achieved under high areal Se/S loading (5.8 mg cm -2 ), while the underlying mechanism was further revealed through synchrotron X-ray probes and Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS). The practical application potential was further evaluated at low (0 °C) and high (55 °C) temperatures under high areal Se/S loading (> 5.0 mg cm -2 ) and thin Li metal (40 µm).

25 ENERGY STORAGE↗
DOE OSTI2023

Understanding and Advancing Bifacial Thin Film Solar Cells under Dual Illumination

There is a great deal of interest in increasing the energy yield from thin film solar cells by implementing bifacial operation. However, deleterious band bending and high interface recombination at the back transparent electrode can cause problems. Herein, it is investigated how bifacial thin film devices perform when illuminated through the front, back, and simultaneously through both interfaces using numerical modeling. It is shown that the downward band bending near the back interface is reduced during illumination when the carrier concentration is low. This effect is not found when the doping is relatively high, but the minority carrier distribution is still modified. Under either condition, the power generated under bifacial illumination exceeds the sum of the power generated when the illumination is solely from the back or the front. It is also shown that the back-illuminated device performance is independent of the angle at which the light enters the back of the device, which provides accommodation for scattered light. Finally, the power enhancement is calculated for bifacial devices relative to front-illuminated devices, and is shown that any significant loss in frontside power generation is difficult to overcome with back illumination under real-world albedo conditions.

CdTe↗
DOE OSTI2019

A Model of Competing Orders and Its Application to a Novel Junction

We introduce a simple Ginzburg-Landau model to describe coupled orders, such as antiferromagnetism and superconductivity in high-T{sub c} cuprate superconductors, using which we can study the spatial modulation of the doping rate. We study junctions between non-doped and highly doped materials of cuprates. Possibility of a novel superconducting boundary state is suggested, which appears at temperatures higher than the maximum transition temperature of the bulk material at optimal doping. Experimental possibilities to realize this state is also discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

Atomic Layer-Deposited Titanium-Doped Vanadium Oxide Thin Films and Their Thermistor Applications

In this paper, we report the enhancement in the temperature coefficient of resistance (TCR) of atomic layer-deposited vanadium oxide thin films through the doping of titanium oxide. The Hall effect measurement provides a potential explanation for the phenomenon. The composition and morphology of the thin films are investigated by x-ray diffraction and scanning electron microscopy techniques. The high TCR, good uniformity, and low processing temperature of the material make it a good candidate for thermistor application.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Effects of iron carbide crystal phases and dopants on the conversions of CO 2 into ethylene

The density functional theory method was used to investigate the conversions of CO 2 to ethylene formation on two common iron carbide surfaces: Fe 3 C(0 1 0) and Fe 5 C 2 (1 1 1). Based on the structure relaxation of reaction intermediates and the elementary reaction transition states. We deduced the most competitive reaction pathways for ethylene production. The main CO 2 -to-ethylene routes and the competition of side products, CO and CH 4 , are discussed. Our analyses showed that CO 2 conversion is surface structure sensitive, whereas CH 4 and C2+ hydrocarbon formations depend on the reactivity of native C atoms in the carbides. To modify the intrinsic catalyst performance, mixing dopants in Fe catalysts is an effective strategy. Furthermore, we demonstrate that doping Zn and Zr can alter the local electronic structure and enhance CO 2 adsorption on the catalyst surface.

CO2 hydrogenation↗
DOE OSTI2019

Understanding the conversion of ethanol to propene on In 2 O 3 from first principles

It is highly desirable to convert bioethanol to value-added chemicals. As such, conversion of ethanol to propene (ETP) is attractive because propene is an important raw material for the production of plastics. In 2 O 3 has shown promising catalytic performance for ETP conversion. However, the underlying mechanisms remain elusive. Here, we use density functional theory (DFT) to investigate ETP reaction pathways on the In 2 O 3 (110) surface. We find that the ETP reactions proceed through three major stages: ethanol to acetaldehyde, acetaldehyde to acetone, and acetone to propene. The ethanol-to-acetaldehyde step is kinetically facile. Comparing the two pathways from acetaldehyde to acetone, we show that the aldol reaction pathway via direct coupling of two acetaldehyde is more favorable than the acetate-ketonization pathway. The acetone-to-propene process is found to be the rate-limiting step of the overall reaction. This work provides a detailed mechanistic view of the ETP chemistry on In 2 O 3 (110) that paves the way for further exploration of effects such as surface termination, surface doping, and co-feeding of H 2 and H 2 O on selectivity and catalyst stability.

09 BIOMASS FUELS↗
DOE OSTI2022

Modeling assisted synthesis of Zr-doped Li 3-x In 1-x Zr x Cl 6 with ultrahigh ionic conductivity for lithium-ion batteries

All-solid-state lithium-ion batteries (ASSLBs) are an important milestone for the future of energy storage because of their capability of impressive energy density and outstanding safety. However, oxide and sulfide solid-state electrolytes (SSEs) suffer from either low ionic conductivity or poor chemical stability. In contrast, halide-based SSEs, are promising as candidate materials owing to high conductivity, good stability, and broad cathode compatibility. Though element doping of the SSEs is an effective and common approach to further improve their electrochemical properties, dopant exploration and optimization through solely experimental trials are both costly and time-consuming. For this aspect, computational simulations for dopant element and concentration screening are adopted in this research and zirconium is selected as a suitable dopant for Li 3 InCl 6 . Further, the synthesized Li 2.75 In 0.75 Zr 0.25 Cl 6 exhibited Li ionic conductivity of 5.82 x 10 -3 Scm -1 at room temperature, which is the highest among reported halide SSEs. The ASSLB formed with Li 2 CoO 2 -Li 2.75 In 0.75 Zr 0.25 Cl 6 -Li/In delivers a high initial capacity of 129.3 mAh∙g -1 . Conclusively, this work provides an effective approach which combines computational modeling and experimental verification for the development of halide SSEs with improved stability and conductivity. The successful design approach and compelling results provide further possibilities and capabilities in future SSE research.

25 ENERGY STORAGE↗
DOE OSTI2018

Effect of oxygen vacancies and Ag deposition on the magnetic properties of Ag/N co-doped TiO2 single-crystal films

Highlights: • Photochemical deposition method to prepare Ag-doped TiO{sub 2} samples. • TiO{sub 2} single crystal films are used for studying room temperature ferromagnetism origin. • Ag element is deposited on TiO{sub 2} single crystal films surface in the form of Ag particles. • Oxygen vacancies and Ag particles synergy influence the ferromagnetism in samples. - Abstract: We employ TiO{sub 2} single-crystal films as a substrate and use a photochemical deposition method to prepare Ag-doped and Ag/N co-doped TiO{sub 2} single-crystal films. We also investigate the optical and magnetic properties of the samples using various measurements. No diffraction peaks related to silver oxide appear in the X-ray diffraction (XRD) spectra, which implies the existence of Ag atoms in Ag-doped TiO{sub 2} single-crystal films. X-ray photoelectron spectroscopy (XPS) spectra indicate the existence of Ti{sup 4+} and Ag° in Ag/N co-doped TiO{sub 2} single-crystal films. It is found that Ag is deposited on a TiO{sub 2} single-crystal film surface in the form of Ag particles. Meanwhile, Ag particles can slightly enhance ferromagnetism in Ag-doped TiO{sub 2} single-crystal films compared with the TiO{sub 2} single-crystal film sample. Oxygen vacancies and Ag particle synergy influence ferromagnetism in Ag/N co-doped TiO{sub 2} single-crystal films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Insights into activators on biomass-derived carbon-based composites for electrochemical energy storage

Biomass-derived carbon materials are now an essential source of carbon electrodes for high-performance supercapacitors due to their cost-effectiveness and abundant heteroatom self-doping properties. When preparing porous carbon materials from biomass for supercapacitor use, the use of activators can significantly increase the specific surface area of carbon materials, enhance pore structures, introduce more heteroatoms, promote the generation of various functional groups, and play a crucial role in the capacitance performance of biomass-derived carbon materials. However, the role of activators during the activation process has been overlooked in previous work focused on improving supercapacitor capacitance performance. In addition, there is a lack of comprehensive reviews summarizing the role of activators. Therefore, this work classifies the types of activators, discusses their activation mechanisms, operability, economy, and environmental friendliness, and proposes future development directions for activators. The main mixing methods of activators and carbon materials are also demonstrated, highlighting the advantages and disadvantages of each method. In conclusion, this work could provide valuable insights for the development of activators for high-performance supercapacitors.

25 ENERGY STORAGE↗
DOE OSTI2022

High-temperature phonon-mediated superconductivity in monolayer Mg 2 B 4 C 2

A two-dimensional material – Mg 2 B 4 C 2 , belonging to the family of the conventional superconductor MgB 2 , is theoretically predicted to exhibit superconductivity with critical temperature T c estimated in the 47–48 K range (predicted using the McMillian-Allen-Dynes formula) without any tuning of external parameters such as doping, strain, or substrate-induced effects. The origin of such a high intrinsic T c is ascribed to the presence of strong electron-phonon coupling and large density of states at the Fermi level. This system is obtained after replacing the chemically active boron-boron surface layers in a MgB 2 slab by chemically inactive boron-carbon layers. Hence, the surfaces of this material are inert. Our calculations confirm the stability of 2D Mg 2 B 4 C 2 . We also find that the key features of this material remain essentially unchanged when its thickness is increased by modestly increasing the number of inner MgB 2 layers.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Selective mass enhancement close to the quantum critical point in BaFe 2 (As 1-x P x ) 2

A quantum critical point (QCP) is currently being conjectured for the BaFe 2 (As 1-x P x ) 2 system at the critical value x c ≈ 0.3. In the proximity of a QCP, all thermodynamic and transport properties are expected to scale with a single characteristic energy, given by the quantum fluctuations. Such a universal behavior has not, however, been found in the superconducting upper critical field H c2 . Here we report H c2 data for epitaxial thin films extracted from the electrical resistance measured in very high magnetic fields up to 67 Tesla. Using a multi-band analysis we find that H c2 is sensitive to the QCP, implying a significant charge carrier effective mass enhancement at the doping-induced QCP that is essentially band-dependent. Our results point to two qualitatively different groups of electrons in BaFe 2 (As 1-x P x ) 2 . The first one (possibly associated to hot spots or whole Fermi sheets) has a strong mass enhancement at the QCP, and the second one is insensitive to the QCP. The observed duality could also be present in many other quantum critical systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2017

Effect of excess lithium in LiMn2O4 and Li1.15Mn1.85O4 electrodes revealed by quantitative analysis of soft X-ray absorption spectroscopy

We performed a comparative study of the soft x-ray absorption spectroscopy of the LiMn2O4 and Li1.15Mn1.85O4 electrode materials with a quantitative analysis of the Mn oxidation states. The revealed redox evolution of Mn upon the electrochemical cycling clarifies the effect of the excess Li in the materials, which naturally explains the different electrochemical performance. The spectral analysis perfectly agrees with the different initial cycling capacities of the two materials. The results show unambiguously that Mn3+ starts to dominate the electrode surface after only one cycle. More importantly, the data show that, while LiMn2O4 electrodes follow the nominal Mn redox evolution, the formation of Mn3+ on the electrode surface is largely retarded for the Li1.15Mn1.85O4 during most of the electrochemical process. Such a different surface Mn redox behavior leads to differences in the detrimental effects of Mn2+ formation on the surface, which is observed directly after only two cycles. Our results provide strong evidence that a key effect of the (bulk) excess Li doping is actually due to processes on the electrode surfaces.

25 ENERGY STORAGE↗
DOE OSTI2018

Point defects and dopants of boron arsenide from first-principles calculations: Donor compensation and doping asymmetry

We apply hybrid density functional theory calculations to identify the formation energies and thermodynamic charge transition levels of native point defects, common impurities, and shallow dopants in B As . We find that As B antisites, boron-related defects such as V B , B As , and B i -V B complexes, and antisite pairs are the dominant intrinsic defects. Native B As is expected to exhibit p-type conduction due to the acceptor-type characteristics of V B and BAs. Among the common impurities we explored, we found that C substitutional defects and H interstitials have relatively low formation energies and are likely to contribute free holes. Interstitial hydrogen is surprisingly also found to be stable in the neutral charge state. Be B , Si As , and Ge As are suggested to be excellent shallow acceptors with low ionization energy (<0.03 eV) and negligible compensation by other point defects considered here. Yet, donors such as Se As , Te As Si B , and Ge B have a relatively large ionization energy (~0.15 eV) and are likely to be passivated by native defects such as B As and V B , as well as C As , H i , and H B . The hole and electron doping asymmetry originates from the heavy effective mass of the conduction band due to its boron orbital character, as well as from boron-related intrinsic defects that compensate donors.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Modulating charge transport via 2 MeV He + irradiation in VO 2

Vanadium dioxide (VO 2 ) is of interest for adaptive electronic applications such as neuromorphic neuristor devices and variable emissivity or tunable thermal control materials, thanks to its key property—a metal–insulator transition (MIT) at 68 °C that is accompanied by a dramatic change in electrical and optical properties. To improve performance in these roles, it is critical to develop approaches to engineer transport properties and the MIT behavior. While many documented techniques exist to modulate the MIT and film resistivities via lattice strain and chemical doping, less is known about the effects of ion irradiation on the intrinsic properties of VO 2 , despite the ability to control the spatial distribution of irradiation beams and the prevalence of high energy ion implantation in the semiconductor industry. The impact of irradiation of different acceleration energies on the responses of VO 2 is of specific interest, as charged particle energy generally impacts both the resulting defect profile and corresponding transport behavior. Here, we demonstrate that 2 MeV He ions at equivalent calculated displacements per atom, in two different types of films, can create remarkable changes to the nature of charge transport in VO 2 , especially in the low-temperature insulating phase. Simulation of resulting changes in electrical conductivity reveals that He ion irradiation offers a strategy to increase both oscillation frequency and the signal transmission. These results provide insights into the intentional design of defect populations to modulate transport for neuromorphic VO 2 devices.

Gurrola, Rebeca M. [Texas A & M Univ., College Sta↗