Search NASA⌕ Search

SEARCH · Search NASA

Results for “elastic modulus”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Mechanical Properties of Particulate Reinforced Aluminium Alloy Matrix Composite

This paper discusses the mechanical properties of Titanium Carbide (TiC) particulate reinforced aluminium-silicon alloy matrix composite. TiC particulate reinforced LM6 alloy matrix composites were fabricated by carbon dioxide sand molding process with different particulate weight fraction. Tensile strength, hardness and microstructure studies were conducted to determine the maximum load, tensile strength, modulus of elasticity and fracture surface analysis have been performed to characterize the morphological aspects of the test samples after tensile testing. Hardness values are measured for the TiC reinforced LM6 alloy composites and it has been found that it gradually increases with increased addition of the reinforcement phase. The tensile strength of the composites increased with the increase percentage of TiC particulate.

36 MATERIALS SCIENCE↗

Gel formation and aging in weakly attractive nanocolloid suspensions at intermediate concentrations

We report x-ray photon correlation spectroscopy (XPCS) and rheometry experiments to study the temporal evolution of gel formation and aging in suspensions of silica nanocolloids possessing a tunable short-range attraction. The colloid volume fractions, {phi} = 0.20 and 0.43, are below the glass regime at high concentration and above the fractal regime at low concentration. Following a sudden initiation of the interparticle attraction, the suspensions display a protracted latency period in which they remain fluid before acquiring a measurable elastic shear modulus. The duration of the latency period and the subsequent rate of increase of the modulus vary strongly with the strength of the attraction. The XPCS results indicate dynamic heterogeneity among the colloids during this gel formation in which a growing fraction of the particles become localized. The temporal evolution of this localization correlates with that of the rheology. In particular, the time scale over which the fraction of localized particles increases tracks the duration of the latency period. Also, at {phi} = 0.20 the localization length characterizing the motion of the localized fraction scales onto the shear modulus with no free parameters as predicted by a self-consistent theory based on mode coupling [K. S. Schweizer and G. Yatsenko, J. Chem. Phys. 127, 164505 (2007)10.1063/1.2780861], while deviations from the predicted scaling at {phi} = 0.43 are observed near the gel point. The XPCS results also reveal slow, hyperdiffusive motion of the colloids in the newly formed gels that is attributed to strain from the relaxation of internal stress. While some features of this motion correlate with the evolving rheology, others appear decoupled from the macroscopic mechanical behavior.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Thermal equation of state and thermodynamic Grüneisen parameter of beryllium metal

We conducted in-situ high-pressure synchrotron x-ray experiments on beryllium metal at pressures up to 7.9 GPa and temperatures up to 1373 K. A complete pressure (P)–volume (V)–temperature (T) equation of state (EOS) is determined based on the experiment, which includes temperature derivatives of elastic bulk modulus (at both constant pressure and constant volume) and pressure dependence of thermal expansivity. From this EOS, we calculate thermal pressure, heat capacity at constant volume, and thermodynamic Grüneisen parameter as a function of temperature. Above ∼600 K, our results show notable deviation from theoretical predictions using the quasiharmonic and local-density approximations, indicating that the free energy calculations need to be further improved within the current scheme of approximations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Scattering mechanical performances for brittle bulk metallic glasses

Scattering mechanical performances of brittle La- and Mg-based BMGs are found in the present study. Upon dynamic loading, there exist largely scattered fracture strengths even if the strain rates are under the same order, and the BMG systems are the same. The negative strain rate dependence for La- and Mg-based BMGs is obtained, i.e., a decreased fracture strength is dominating from quasi-static to dynamic compression. At cryogenic temperatures, distinguishingly low fracture strengths are available for these two brittle BMGs, and decreased tolerance to accommodate strains makes BMGs more and more brittle. It is concluded that the scattering mechanical performances of brittle BMGs should be carefully evaluated before actual applications.

36 MATERIALS SCIENCE↗

Effect of addition of Ag nano powder on mechanical properties of epoxy/polyaminoamide adduct coatings filled with conducting polymer

In this study the effect of Ag Nano powder on mechanical properties of epoxy coatings filled with optimized ratio of conducting polymers (Polyaniline and Polyppyrole) was evaluated. Bisphenol A diglycidyl ether epoxy resin (DGEBA) along with polyaminoamide adduct (ARADUR 3282-1 BD) is used as curing agent under optimized stoichiometry values. Curing is performed at room temperature with different percentages of Nano filler. Glass and steel panels were used as coating substrate. Bird applicator was used to coat the samples in order to obtain thin film with wet film thickness (WFT) of about 70-90 µm. The samples were kept in dust free environment for about 7 days at room temperature for complete curing. The coated steel panels were used to evaluate the mechanical properties of coating such as hardness, scratch and impact tests whereas coated glass panels were used for measuring pendulum hardness of the coatings. To check the dispersion and morphology of Nano filler in epoxy matrix scanning electron microscopy (SEM) was used in addition Nano indentation was also performed to observe the effect of Nano filler on modulus of elasticity and hardness at Nano scale.

36 MATERIALS SCIENCE↗

Linking strain anisotropy and plasticity in copper metallization

The elastic anisotropy of copper leads to significant variation in the x-ray elastic constants (XEC), which link diffraction-based strain measurements to stress. An accurate depiction of the mechanical response in copper thin films requires a determination of an appropriate grain interaction model that lies between Voigt and Reuss limits. It is shown that the associated XEC weighting fraction, x*, between these limits provides a metric by which strain anisotropy can be quantified. Experimental values of x*, as determined by a linear regression scheme of diffraction data collected from multiple reflections, reveal the degree of strain anisotropy and its dependence on plastic deformation induced during in-situ and ex-situ thermal treatments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Lattice Boltzmann simulation of asymmetric flow in nematic liquid crystals with finite anchoring

Liquid crystals (LCs) display many of the flow characteristics of liquids but exhibit long range orientational order. In the nematic phase, the coupling of structure and flow leads to complex hydrodynamic effects that remain to be fully elucidated. Here, we consider the hydrodynamics of a nematic LC in a hybrid cell, where opposite walls have conflicting anchoring boundary conditions, and we employ a 3D lattice Boltzmann method to simulate the time-dependent flow patterns that can arise. Due to the symmetry breaking of the director field within the hybrid cell, we observe that at low to moderate shear rates, the volumetric flow rate under Couette and Poiseuille flows is different for opposite flow directions. At high shear rates, the director field may undergo a topological transition which leads to symmetric flows. Here, by applying an oscillatory pressure gradient to the channel, a net volumetric flow rate is found to depend on the magnitude and frequency of the oscillation, as well as the anchoring strength. Taken together, our findings suggest several intriguing new applications for LCs in microfluidic devices.

36 MATERIALS SCIENCE↗

A coarse-grain force field for RDX: Density dependent and energy conserving

We describe the development of a density-dependent transferable coarse-grain model of crystalline hexahydro-1,3,5-trinitro-s-triazine (RDX) that can be used with the energy conserving dissipative particle dynamics method. The model is an extension of a recently reported one-site model of RDX that was developed by using a force-matching method. The density-dependent forces in that original model are provided through an interpolation scheme that poorly conserves energy. The development of the new model presented in this work first involved a multi-objective procedure to improve the structural and thermodynamic properties of the previous model, followed by the inclusion of the density dependency via a conservative form of the force field that conserves energy. The new model accurately predicts the density, structure, pressure-volume isotherm, bulk modulus, and elastic constants of the RDX crystal at ambient pressure and exhibits transferability to a liquid phase at melt conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lithium concentration dependent structure and mechanics of amorphous silicon

A better understanding of lithium-silicon alloying mechanisms and associated mechanical behavior is essential for the design of Si-based electrodes for Li-ion batteries. Unfortunately, the relationship between the dynamic mechanical response and microstructure evolution during lithiation and delithiation has not been well understood. We use molecular dynamic simulations to investigate lithiated amorphous silicon with a focus to the evolution of its microstructure, phase composition, and stress generation. The results show that the formation of Li{sub x}Si alloy phase is via different mechanisms, depending on Li concentration. In these alloy phases, the increase in Li concentration results in reduction of modulus of elasticity and fracture strength but increase in ductility in tension. For a Li{sub x}Si system with uniform Li distribution, volume change induced stress is well below the fracture strength in tension.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ion-beam-induced planarization, densification, and exfoliation of low-density nanoporous silica

Planarization of low-density nanoporous solids is challenging. Here, we demonstrate that ion bombardment to doses of ~10 15 cm -2 results in significant smoothing of silica aerogels, yielding mirror-like surfaces after metallization. The surface smoothing efficiency scales with the ion energy loss component leading to local lattice heating. Furthermore, planarization is accompanied by sub-surface monolith densification, resulting in surface exfoliation with increasing ion dose. These findings have implications for the fabrication of graded-density nanofoams, aerogel-based lightweight optical components, and meso-origami.

36 MATERIALS SCIENCE↗

Microstructure, mechanical and electrical properties of nanocrystalline W-Mo thin films

The effect of sputtering pressure on the surface/interface microstructure, crystal phase, mechanical properties and electrical characteristics of nanocrystalline W-Mo films is reported. The W-Mo films (≈300 nm) with variable microstructure were deposited under variable argon (Ar) sputtering pressure (P Ar ), which is varied in the range of 3-19 mTorr. X-ray diffraction analyses indicate that the W-Mo films crystallize in thermodynamically stable α-phase of W. However, the crystal-quality degradation occurs for W-Mo films deposited at higher P Ar due to difference in the adatom mobilities. The average grain size (d) of the W-Mo films was in the range of 11-24 nm; grain size decreases with increasing P Ar . The effect of P Ar and associated microstructure are significant on the mechanical characteristics; the hardness (H) and modulus of elasticity (E r ) of W-Mo films deposited at lower P Ar were higher but decreases continuously with increasing P Ar . The W-Mo films deposited under optimum sputtering pressure exhibit superior mechanical characteristics: H=40 GPa, E r =275 GPa, H/E r =0.8, and H 3 /E r 2 =0.145 GPa, which are higher compared to pure, α-phase W-films. The W-Mo films deposited at P Ar =3-9 mTorr exhibit high resistivity≈350-400 μΩ-cm, which decreases to 150-200 μΩ-cm for films deposited at higher P Ar . Based on the results, structure-mechanical-electrical property correlation in W-Mo films is established.

36 MATERIALS SCIENCE↗

Slow dynamics of consolidated granular systems: Multi-scale relaxation

In this paper, dynamic acousto-elastic testing, a pump-probe scheme, is employed to investigate the recovery of consolidated granular media systems from the non-equilibrium steady state established by a pump strain field. This measurement scheme makes it possible to follow the recovery from the non-equilibrium steady state over many orders of magnitude in time. The recovery is described with a relaxation time spectrum that is found to be independent of the amplitude of the non-equilibrium steady state (pump amplitude) and of the environment in which samples reside. Finally, the non-equilibrium steady state and its slow recovery are the laboratory realization of phenomena that are found in many physical systems of practical importance.

42 ENGINEERING↗

Experimental collaboration for thick concrete structures with alkali-silica reaction

Alkali-Silica Reaction (ASR) is a reaction that occurs over time in concrete between alkaline cement paste and reactive, non-crystalline silica in aggregates. An expansive gel is formed within the aggregates which results in micro-cracks in aggregates and adjacent cement paste. The reaction requires the presence of water and has been predominantly detected in groundwater-impacted portions of below grade structures, with limited impact to exterior surfaces in above grade structures. ASR can potentially affect concrete properties and performance characteristics such as compressive strength, modulus of elasticity, shear strength, and tensile strength. Since ASR degradation often takes significant amounts of time, developing ASR detection techniques is important to the sustainability and extended operation lifetimes of nuclear power plants (NPPs). The University of Tennessee, Knoxville (UTK) in collaboration with Oak Ridge National Laboratory (ORNL) designed and built an experiment representative of typical NPP structures to study ASR in thick concrete structures.

Ezell, N Dianne Bull↗

Ultra-low-density silver aerogels via freeze-substitution

In this paper, we reported a method for fabricating <10 mg/cm 3 silver aerogels via the freeze casting of aqueous nanowire suspensions followed by freeze substitution and supercritical drying. This method overcomes the limitations of traditional freeze drying and yields highly uniform, crack-free monoliths that undergo no measurable shrinkage with excellent mold reproduction. Significantly, freeze substitution enables the use of high concentrations of cryoprotectants to control the freezing process and, hence, the pore architecture of the resulting aerogels. Due to its physical nature, this method is applicable to the fabrication of materials with a broad range of compositions.

36 MATERIALS SCIENCE↗

Pair and many-body interactions between ligated Au nanoparticles

Here, we report the results of molecular dynamics simulations of the properties of a pseudo-atom (united atom) model of dodecane thiol ligated 5-nm diameter gold nanoparticles (AuNPs) in a vacuum as a function of ligand coverage and particle separation in three states of aggregation, namely, the isolated AuNPs, the isolated pair of AuNPs, and a square lattice of four AuNPs. Our calculations show that the ligand density along a radius emanating from the core of an isolated AuNP has the same gross features for all values of the coverage; it oscillates around a constant value up to a distance along the chain corresponding to the position of the fourth pseudo-atom and then smoothly decays to zero, reflecting both the restricted conformations of the chain near the core surface and the larger numbers of conformations available further from the core. Interaction between two AuNPs generates changes in the ligand distributions of each. We examine the structure and general shape of the ligand envelope as a function of the coverage and demonstrate that the equilibrium structure of the envelope and the deformation of that envelope generated by interaction between the NPs are coverage-dependent so that the shape, depth, and position of the minimum of the potential of mean force display a systematic dependence on the ligand coverage. We propose an accurate analytical description of the calculated potential of mean force as a function of a set of parameters that scale linearly with the ligand coverage. Noting that the conformational freedom of the ligands implies that multiparticle induced deviations from additivity of the pair potential of mean force are likely important; we define and calculate a “bond stretching” effective pair potential of mean force for a square lattice of particles that contains, implicitly, both the three- and four-NP contributions. We find that the bond stretching effective pair potential of mean force in this cluster has a different minimum and a different well depth from the isolated pair potential of mean force. Previous work has found that the three-particle contribution to deviation from pair additivity is monotonically repulsive, whereas we find that the combined three- and four-particle contributions have an attractive well, implying that the three- and four-particle contributions are of comparable magnitude but opposite sign, thereby suggesting that even higher order correction terms likely play a significant role in the behavior of dense assemblies of many nanoparticles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A novel use of frequency-banded synthetic aperture focusing technique for reconstructions of alkali-silica reaction in thick-reinforced concrete structures

As they degrade and age, concrete structures are susceptible to the development of multiple defects, such as alkali-silica reaction (ASR). ASR forms a gel that occurs over time between alkaline cement paste and reactive, noncrystalline silica in aggregates [1]. With the continuing extension of the life span of nuclear power plants, it is important to monitor the structural integrity of concrete structures after 40+ years. Compression strength, modulus of elasticity, flexural stiffness, shear strength, and tensile strength are performance characteristics susceptible to the development of ASR. Current methods for monitoring for defects and degradation within thick concrete structures require damaging the concrete. Oak Ridge National Laboratory, in collaboration with the University of Pittsburgh, has developed a nondestructive evaluation (NDE) and reconstruction technique that enables deep-image reconstruction of damaged concrete. The frequency-banded synthetic aperture focusing technique (FB-SAFT) is an augmented SAFT reconstruction that segments the time-series data into different frequency bands using wavelets immediately before performing SAFT reconstructions [2]. This paper presents the NDE instrumentation and reconstruction techniques applied to thick-reinforced concrete structures and concludes with preliminary results.

Ezell, N Dianne↗

Sound speed measurements in shock-compressed cemented Tungsten carbides at pressures up to 100 GPa

To gain insights into thermodynamic states attained during shock compression of cemented tungsten carbide with 3.7 wt.% cobalt binder, we present results of longitudinal sound (release wave) speed measurements and their analysis at peak stresses up to 100 GPa (volumetric compression ratio ~ 15%). The sound speeds are determined using front-surface impact and release-wave overtake plate impact experimental configurations using laser interferometry. The measured sound speed data along with estimates for bulk sound speeds obtained using the fourth-order Birch-Murnaghan EoS and thermodynamics are used to determine the longitudinal moduli and shear moduli of shocked tungsten carbide at the various peak compression states attained in the experiments. Here, the longitudinal sound speeds were found to increase linearly with volume compression ratio from 6.97 ± 0.010 km/s at ambient conditions to 8.26 ± 0.156 km/s at a volume compression ratio of ~ 15%. The corresponding longitudinal elastic moduli also increase nearly linearly with the volume compression ratio but remain consistently lower than their theoretical predictions based on continuum models with no damage. Also, the sensitivity of shear moduli to pressure, as predicted by the Steinberg-Guinan model, is reduced substantially and the shear moduli of cemented WC with 3.7 wt.% Co remains nearly constant at ~ 310 GPa at the various peak compression stress states investigated in the present study.

36 MATERIALS SCIENCE↗

Neural network potential from bispectrum components: A case study on crystalline silicon

In this article, we present a systematic study on developing machine learning force fields (MLFFs) for crystalline silicon. While the main-stream approach of fitting a MLFF is to use a small and localized training set from molecular dynamics simulations, it is unlikely to cover the global features of the potential energy surface. Additionally, to remedy this issue, we used randomly generated symmetrical crystal structures to train a more general Si-MLFF. Furthermore, we performed substantial benchmarks among different choices of material descriptors and regression techniques on two different sets of silicon data. Our results show that neural network potential fitting with bispectrum coefficients as descriptors is a feasible method for obtaining accurate and transferable MLFFs.

36 MATERIALS SCIENCE↗