Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrolyte structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Single‐Crystal LiNi x Mn y Co 1− x − y O 2 Cathodes for Extreme Fast Charging

Abstract Ni‐rich layered LiNi x Mn y Co 1− x − y O 2 (NMCs, x ≥ 0.8) are poised to be the dominating cathode materials for lithium‐ion batteries for the foreseeable future. Conventional polycrystalline NMCs, however, suffer from severe cracking along the grain boundaries of primary particles and capacity loss under high charge and/or discharge rates, hindering their implementation in fast‐charging electric vehicular (EV) batteries. Single‐crystal (SC) NMCs are attractive alternatives as they eliminate intergranular cracking and allow for grain‐level surface optimization for fast Li transport. In the present study, the authors report synthetic approaches to produce SC LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NMC811) samples with different morphologies: Oct‐SC811 with predominating (012)‐family surface and Poly‐SC811 with predominating (104)‐family surface. Poly‐SC811, representing the first experimentally synthesized NMC811 single crystals with (104) surface, delivers superior performance even at the ultra‐high rate of 6 C. Through detailed X‐ray analysis and electron microscopy characterization, it is shown that the enhanced performance originates from better chemical and structural stabilities, faster Li + diffusion kinetics, suppressed side reactions with electrolyte, and excellent cracking resistance. These insights provide important design guidelines in the future development of fast‐charging NMC‐type cathode materials.

Lu, Yanying↗

Tunable Stabilization of Cuprous Ions via Kinetic and Thermodynamic Control of Cu Electrodeposition in Non-Aqueous Media

In this work, significant stabilization of Cu + ions is achieved in non-aqueous electrolytes containing TFSI - and Cl - anions with diglyme as solvent. When Cl - is absent, stabilization of Cu + occurs due to the very low stability constant of Cu 2+ in diglyme. However, in the presence of relatively low Cl - concentrations (i.e., equimolar relative to Cu 2+ ), both Cu + and Cu 2+ form extremely stable Cu 2+ / + [Cl - ] complexes resulting in a similar to 1200 mV negative shift of the Cu + /0 redox couple relative to that of more easily reduced Cu + [TFSI - ][Cl - ] complexes. Furthermore, these results suggest that the lower solvation energies and wider electrochemical stability windows of non-aqueous solvents relative to water enable anions to play a much more significant role in guiding complexation behavior-providing new possibilities for (electro)chemical stabilization of reactive intermediates and highlighting the wealth of unexplored opportunities for electrolyte design in non-aqueous systems.

Anion Association↗

Improved Single-Ion Conductivity of Polymer Electrolyte via Accelerated Segmental Dynamics

Single-ion conducting polymer electrolytes (SICPEs) have many advantages for solid-state battery applications, while low conductivities remain the bottleneck for their practical applications. In this paper, a strategy that can significantly improve the ionic conductivity of SICPEs based on the concept of accelerated segmental dynamics was demonstrated by the evaluation of the thermal property, rheological behavior, morphology analysis, molecular dynamics simulation, and conductivity performance. With both “soft” poly(dimethylsiloxane) (PDMS) backbone and poly(ethylene glycol) (PEG) side chains, the obtained SICPE possesses faster segmental relaxation and higher lithium-ion conductivity. With lithium “transference” number close to unity, the obtained SICPE also shows excellent electrochemical stability against lithium metal electrodes. The clear relationship established between the segmental dynamics of polymer electrolyte and its ionic conductivity should contribute to achieve a solid electrolyte with improved ionic conductivity toward the next-generation solid-state battery.

Segmental Dynamics↗

Edge-Enhanced Oxygen Evolution Reactivity at Ultrathin, Au-Supported Fe 2 O 3 Electrocatalysts

Transition metal oxides have gained attention as promising oxygen evolution reaction (OER) electrocatalysts in alkaline electrolytes, but heterogeneities in typical catalyst samples often obscure key structure–property relationships that are essential for developing higher performance materials. Here, we have combined ultrahigh vacuum surface science techniques, electrochemical measurements, and density functional theory (DFT) to quantify structure-dependent OER activity in a series of well-defined electrocatalysts. We describe a direct correlation between the population of Fe edge-site atoms and the OER activity of ultrathin Fe 2 O 3 nanostructures (~0.5 nm apparent height) grown on Au(111) substrates. Hydroxylated Fe atoms residing at edge-sites along the catalyst/support interface were spectroscopically identified as key reaction centers, and these Fe edge-site atoms were estimated to produce OER turnover frequencies approximately 150 times higher than that of Fe atoms on the catalyst surface at an applied potential of 1.8 V vs the reversible hydrogen electrode. Impressively, ultrathin Fe 2 O 3 /Au nanostructures with a high density of catalytically active Fe edge-site atoms outperformed an ultrathin IrOx/Au catalyst at moderate overpotentials. DFT calculations revealed more favorable OER at edge sites along the Fe 2 O 3 /Au interface, with lower predicted overpotentials due to beneficial modification of intermediate binding. Our results demonstrate how a combination of surface science, electrochemistry, and computational modeling can be used to identify key structure–property relationships in a well-defined electrocatalytic system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Impacts of Imidazolate Ligand on Performance of Zeolitic-Imidazolate Framework-Derived Oxygen Reduction Catalysts

Carbon-hosted Fe-N-coordinated (Fe/N/C) materials, especially those derived from thermolysis of iron-added zinc-based zeoliteimidazolate frameworks (ZIFs), have emerged as the most promising platinum group metal-free (PGM-free) oxygen reduction reaction (ORR) catalysts. However, the impacts of the precursory ZIF structure and their conversion chemistry during thermal activation to the final catalytic activity remain to be further explored in the process of continuously refining the catalyst performance. In this work, we synthesized a series of Fe-doped ZIFs with different imidazolate ligands and systematically studied the correlation between the crystal structures with the final ORR catalytic activity in an alkaline electrolyte. We also investigated the ZIF decomposition chemistry during pyrolysis using a thermogravimetric mass-spectroscopic analysis. We demonstrated that imidazole side-chain substitution alters the ZIF's decomposition during pyrolysis, influencing the elemental compositions, surface properties, graphitization levels, and ultimately the catalytic performance. The Zn(mIm) 2 TPIBP catalyst affords the highest ORR activity with a half-wave potential of 0.93 V vs RHE, representing the best among all PGM-free catalysts studied.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Elucidating Lithium Transport Mechanisms in Disordered LiF from Machine-Learning Molecular Dynamics Simulations

Lithium fluoride (LiF) is a ubiquitous component of solid- and cathode–electrolyte interphases, yet its functional role remains unclear under the structural and chemical heterogeneity typical of cycling batteries. Here, we systematically quantify how structural disorder, off-stoichiometry, and strain govern Li-ion transport in LiF. Using a machine-learning potential to enable extensive molecular-dynamics sampling, we compare crystalline and amorphous LiF, Li 0.95 F, and LiF 0.95 , and evaluate the impact of small homogeneous deformations. Defect-free crystalline LiF is effectively ion-blocking at 300−500 K, whereas amorphization generates free-volume–assisted percolation pathways that facilitates Li-ion diffusion. At elevated temperatures, thermodynamically driven crystallization disrupts these pathways, leading to non-Arrhenius behavior. In crystalline phases, Li deficiency activates vacancy-mediated diffusion, while in amorphous LiF, transport is governed primarily by network connectivity. Strain is found to have only a marginal effect on Li mobility in both crystalline and amorphous structures.

Batteries↗

Insight into Sulfur Reactions in Li–S Batteries

Understanding and controlling the sulfur reduction species (Li2Sx, 1 ≤ x ≤ 8) under realistic battery conditions are essential for the development of advanced practical Li–S cells that can reach their full theoretical capacity. However, it has been a great challenge to probe the sulfur reduction intermediates and products because of the lack of methods. This work employed various ex situ and in situ methods to study the mechanism of the Li–S redox reactions and the properties of Li2Sx and Li2S. Synchrotron high-energy X-ray diffraction analysis used to characterize dry powder deposits from lithium polysulfide solution suggests that the new crystallite phase may be lithium polysulfides. The formation of Li2S crystallites with a polyhedral structure was observed in cells with both the conventional (LiTFSI) electrolyte and polysulfide-based electrolyte. In addition, an in situ transmission electron microscopy experiment observed that the lithium diffusion to sulfur during discharge preferentially occurred at the sulfur surface and formed a solid Li2S crust. This may be the reason for the capacity fade in Li–S cells (as also suggested by EIS experiment in Supporting Information). The results can be a guide for future studies and control of the sulfur species and meanwhile a baseline for approaching the theoretical capacity of the Li–S battery.

Coulombic efficiency↗

Assessment of the Environmental Impacts of Coalbed Methane Development in the Powder River Basin - Use of Coalbead Methane Produced Water for Cropland Irrigation

Water quality is a major concern with regard to development of coalbed methane (CBM) in the Powder River Basin, Wyoming. Large quantities of water are being produced and discharged as a by-product in the process of releasing natural gas from coal. Current practices of discharging large volumes of water into drainage channels or using it to irrigate cropland areas has the potential to elevate salinity and sodicity in soils. Elevated salinity affects the ability of plants to uptake water to facilitate biochemical processes such as photosynthesis and plant growth. Elevated sodicity in irrigation water adversely affects soil structure necessary for water infiltration, nutrient supply, and aeration. Salinity and sodicity concentrations are important in that a sodic soil can maintain its structure if the salinity level is maintained above the threshold electrolyte concentration. In this study, cropland soil and CBM water were treated with gypsum and sulfur. Changes in soil chemistry among different treatments were monitored using a split plot experiment. The CBM water used for irrigation had an EC of 1380 {micro}S cm{sup -1} and SAR of 24.3 mmol{sup 1/2} L{sup -1/2}. Baseline and post treatment soil samples were collected to a depth of 60 cm within each study plot, analyzed, and characterized for chemical parameters. Comparisons between Spring 2004 and Fall 2004 soil chemistry data after one irrigation season (using the equivalent of 1 month of irrigation water or {approx}12 inches) indicated that irrigating with Piney Creek water or a 50:50 blend of Piney Creek water and CBM water did not cause SAR values to increase. A combination of using a gypsum amendment to the soil along with a gypsum injection and sulfur burner treatment to the irrigation water resulted in the lowest SAR value in the first soil horizon among treatments irrigated solely with CBM produced water. The SAR value resulting from this combination treatment was 53% lower than using CBM water with no amendments to soil or water. Soil amendments to cores in the laboratory did not increase soil hydraulic conductivity when CBM water was applied.

01 COAL, LIGNITE, AND PEAT↗

Atomic structures for studying elemental segregation at garnet grain boundaries

This is a dataset containing atomic structures of bulk and grain boundaries of doped/undoped Li7La3Zr2O12 solid electrolytes, which were obtained from atomic simulations in a journal paper "Elemental Segregation at Garnet Grain Boundaries: Eliminating Its Detrimental Role in Conductivity and Lithium Nucleation" by Kai Yao et al.

Kim, Kwangnam [Lawrence Livermore National Laborat↗

Study, selection, and preparation of solid cationic conductors

Crystal chemical principles and transport theory were used to predict structures and specific compounds which might find application as solid electrolytes in rechargeable high energy and high power density batteries operating at temperatures less than 200 C. More than twenty compounds were synthesized or obtained and screened by nuclear magnetic resonance and conductivity. Many were densified by sintering or hot pressing. Encouraging results were obtained for nine of these materials but none have yet been good ionic conductors at low temperature.

Roth, W. L.↗

NASA Tech Briefs, November 2006

Topics include: Simulator for Testing Spacecraft Separation Devices; Apparatus for Hot Impact Testing of Material Specimens; Instrument for Aircraft-Icing and Cloud-Physics Measurements; Advances in Measurement of Skin Friction in Airflow; Improved Apparatus for Testing Monoball Bearings; High-Speed Laser Scanner Maps a Surface in Three Dimensions; Electro-Optical Imaging Fourier-Transform Spectrometer; Infrared Instrument for Detecting Hydrogen Fires; Modified Coaxial Probe Feeds for Layered Antennas; Detecting Negative Obstacles by Use of Radar; Cryogenic Pound Circuits for Cryogenic Sapphire Oscillators; PixelLearn; New Software for Predicting Charging of Spacecraft; Conversion Between Osculating and Mean Orbital Elements; Generating a 2D Representation of a Complex Data Structure; Making Activated Carbon by Wet Pressurized Pyrolysis; Composite Solid Electrolyte Containing Li+- Conducting Fibers; Electrically Conductive Anodized Aluminum Surfaces; Rapid-Chill Cryogenic Coaxial Direct-Acting Solenoid Valve; Variable-Tension-Cord Suspension/Vibration- Isolation System; Techniques for Connecting Superconducting Thin Films; Versatile Friction Stir Welding/Friction Plug Welding System; Thermal Spore Exposure Vessels; Enumerating Spore-Forming Bacteria Airborne with Particles; Miniature Oxidizer Ionizer for a Fuel Cell; Miniature Ion-Array Spectrometer; Promoted-Combustion Chamber with Induction Heating Coil; Miniature Ion-Mobility Spectrometer; Mixed-Salt/Ester Electrolytes for Low-Temperature Li+ Cells; Miniature Free-Space Electrostatic Ion Thrusters; Miniature Bipolar Electrostatic Ion Thruster; Holographic Plossl Retroreflectors; Miniature Electrostatic Ion Thruster With Magnet; Using Apex To Construct CPM-GOMS Models; Sequence Detection for PPM Optical Communication With ISI; Algorithm for Rapid Searching Among Star-Catalog Entries; Expectation-Based Control of Noise and Chaos; Radio Heating of Lunar Soil to Release Gases; Using Electrostriction to Manipulate Ullage in Microgravity; Equations for Scoring Rules When Data Are Missing; Insulating Material for Next-Generation Spacecraft; and Pseudorandom Switching for Adding Radar to the AFF Sensor.

Source record↗

Enhanced Photovoltaic Properties of Potassium-Adsorbed Titania Nanotubes

It is demonstrated that vertically-aligned titania nanotube planar arrays fabricated by electrochemical anodization using standard potassium-containing electrolytes invariably contain a significant amount of surface-adsorbed potassium ions, hitherto undetected, that affect the titania photoelectrochemical or PEC performance. Synchrotron-based near edge X-ray absorption fine structure (NEXAFS) spectroscopy reveals the strong ionic nature of surface potassium-titania bonds that alters the PEC performance over that of pure titania nanotubes through reduction of the external electrical bias needed to produce hydrogen at maximum efficiency. This result implies that the external electrical energy input required per liter of solar hydrogen produced with potassium-adsorbed titania nanotubes may be reduced. Tailoring the potassium content may thus be an alternative means to fine-tune the photoelectrochemical response of TiO2 nanotube-based PEC electrodes.

36 MATERIALS SCIENCE↗

Excluded volume and ion-ion correlation effects on the ionic atmosphere around B-DNA: Theory, simulations, and experiments

The ionic atmosphere around a nucleic acid regulates its stability in aqueous salt solutions. One major source of complexity in biological activities involving nucleic acids arises from the strong influence of the surrounding ions and water molecules on their structural and thermodynamic properties. Here, we implement a classical density functional theory for cylindrical polyelectrolytes embedded in aqueous electrolytes containing explicit (neutral hard sphere) water molecules at experimental solvent concentrations. Our approach allows us to include ion correlations as well as solvent and ion excluded volume effects for studying the structural and thermodynamic properties of highly charged cylindrical polyelectrolytes. Several models of size and charge asymmetric mixtures of aqueous electrolytes at physiological concentrations are studied. Our results are in good agreement with Monte Carlo simulations. Our numerical calculations display significant differences in the ion density profiles for the different aqueous electrolyte models studied. However, similar results regarding the excess number of ions adsorbed to the B-DNA molecule are predicted by our theoretical approach for different aqueous electrolyte models. These findings suggest that ion counting experimental data should not be used alone to validate the performance of aqueous DNA-electrolyte models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗