Search NASA⌕ Search

SEARCH · Search NASA

Results for “formatting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Effect of Aluminum Dissolved in Hematite on Formation of Calcium Ferrites at 1473 K

Silico-ferrite of calcium and aluminum (SFCA) is a primary bonding phase, which determines the quality of high basicity sinter used widely as raw materials in blast furnace ironmaking. Calcium ferrite containing aluminum (CFA) is a key precursor during the formation process of SFCA and is influenced by Al{sub 2}O{sub 3} content in iron ore fines. In this work, the experiment was conducted to investigate the effect of the aluminum occurrence state on the formation of calcium ferrite by the simulating sintering process of different types of aluminum-bearing hematite at 1473 K. X-ray diffraction, optical microscope, scanning electron microscopy, and energy-dispersive spectroscopy were used to characterize the mineral change in sintered samples. The result shows that the formation of CFA was promoted by both granular Al{sub 2}O{sub 3} wrapped in Fe{sub 2}O{sub 3} and aluminum dissolved in Fe{sub 2}O{sub 3} solid solution, especially for the latter, due to the formation of the CFA directly from the reaction between Fe{sub 2}O{sub 3}-Al{sub 2}O{sub 3} solid solution and CaO, and the aluminum content in CFA formed was influenced obviously by the solid solution amount of alumina into Fe{sub 2}O{sub 3} as raw materials.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Damring Formation During Rotary Kiln Chromite Pre-reduction: Effects of Pulverized Carbonaceous Fuel Selection and Partial Pellet Melting

Electricity consumption is the largest cost contributing factor in the production of ferrochrome. Currently the pelletized chromite pre-reduction process (solid-state reduction of chromite) is the process option with the lowest specific electricity consumption (MWh/ton). In this process, pelletized chromite is fed into a rotary kiln at 1573 K (1300 °C), where partial pre-reduction takes place. Damring formation (material build-up) in the rotary kiln causes routine shutdowns, resulting in loss of revenue. The damring formation is possibly caused by melting of the ash of the pulverized coal used to fire the kiln and/or the partial melting of the chromite pellets. Ash fusion temperatures of twenty different samples were evaluated to assess the temperature at which the pulverized coal ash will start to contribute to damring formation. Sessile drop tests were used to assess the softening behavior of different ore types (e.g., UG2, MG, and LG metgrade), as well as softening of composite chromite pellets made from these ores. Actual damrings were also analyzed using scanning electron microscopy with energy dispersive X-ray spectroscopy. Results indicate that it is mainly the pulverized coal ash that will contribute to damring formation, and not ore or pellet softening. Multiple-linear regression was used to derive equations to predict the ash fusion temperatures of the pulverized coal ash, which can be used by ferrochrome producers to optimize pulverized coal selection.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Formation Mechanisms and Leachability of Hexavalent Chromium in Cr{sub 2}O{sub 3}-Containing Refractory Castables of Electric Arc Furnace Cover

Cr (III)-containing refractories are widely used as electric-arc furnace cover because of their excellent corrosion resistance properties. However, the formation of hexavalent chromium [Cr(VI)] remains a matter of concern during the service and subsequent disposal of the spent refractories. Moreover, the Cr(VI) formation mechanism and total amount of Cr(VI) generated are not clearly understood. In this study, samples from different parts of a spent electric arc furnace cover were collected from a local integrated steel plant. The phase composition, microstructure, formation and leachability of Cr(VI) were investigated using X-ray photoelectron spectroscopy, X-ray diffraction, scanning electron microscopy with energy dispersive X-ray spectroscopy, and TRGS 613 leaching test (Technische Regeln für Gefahrstoffe-TRGS 613-October 2002)/multiple leaching tests. A Cr(VI)-containing phase namely CaCrO{sub 4} existed in the sample at a medium temperature range, while another Cr(VI)-containing phase namely hauyne (Ca{sub 4}Al{sub 6}CrO{sub 16}) and a Cr(III)-containing phase (Al{sub 2}O{sub 3}–Cr{sub 2}O{sub 3} solid solution) formed in the high temperature region. Concentrations of Cr(VI) in the leachates (as in the TRGS 613 procedure) exceeded the European permissible limit. During the leaching tests in an acid condition, Cr(VI) was reduced by Fe{sup 2+}, which was primarily derived from the dissolution of FeO in the samples, while more Cr(VI) leached out with distilled water. Formation of an Al{sub 2}O{sub 3}–Cr{sub 2}O{sub 3} solid solution can inhibit Cr(VI) generation.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Modeling of Keyhole-Induced Pore Formation in Laser-Arc Hybrid Welding of Aluminum Alloy with a Horizontal Fillet Joint

A three-dimensional transient model is proposed to investigate the weld pool dynamic behavior in laser + metal inert gas (MIG) hybrid fillet welding of aluminum alloy in the horizontal position, which allows for the joint configuration and coupling of the keyhole, droplet and weld pool as well as the heat and mass exchange between gas and liquid phases and is able to simulate the temperature distribution, fluid flow and formation process of a keyhole-induced pore in hybrid welding with a horizontal fillet joint. The weld porosity is also measured using x-ray nondestructive testing technology. Keyhole behavior and the formation mechanism of keyhole-induced porosity were analyzed. The calculated results are in generally good agreement with the experimental ones. A clockwise vortex always exists at the middle part of the weld pool. The formation and growth of the molten metal bulge on the keyhole wall are responsible for the occurrence of a gas bubble, which has a variation in size and shape and can be split during welding. The keyhole collapses easily at its middle or upper part in horizontal fillet welding, and the capture of the bubble by the upper molten pool boundary enhances the possibility of porosity formation to some degree. The keyhole-induced pore is mainly formed at the regions near the keyhole bottom and the upper fusion line of the weld pool.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Spatially and temporally restricted expression of PtrMYB021 regulates secondary cell wall formation in Arabidopsis

Among the R2R3 MYB transcription factors that involve in the regulation of secondary cell wall formation in Arabidopsis, MYB46 alone is sufficient to induce the entire secondary cell wall biosynthesis program. PtrMYB021, the poplar homolog of MYB46, has been reported to regulate secondary cell wall formation when expressed in Arabidopsis. We report here that spatially and temporally restricted expression of PtrMYB021 is critical for its function in regulating secondary cell wall formation. By using quantitative RT-PCR, we found that PtrMYB021 was expressed primarily in xylem tissues. When expressed in Arabidopsis under the control of PtrCesA8, but not the 35S promoter, PtrMYB021 increased secondary cell wall thickness, which is likely caused by increased lignification as well as changes in cell wall carbohydrate composition. Consistent with this, elevated expression of lignin and cellulose biosynthetic genes were observed in the transgenic plants. Finally, when expressed in Arabidopsis protoplasts as fusion proteins to the Gal4 DNA binding domain, PtrMYB021 activated the reporter gene Gal4-GUS. In summary, our results suggest that PtrMYB021 is a transcriptional activator, and spatially and temporally restricted expression of PtrMYB021 in Arabidopsis regulates secondary cell wall formation by activating a subset of secondary cell wall biosynthesis genes.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2018

Tandem Mass Spectrometry and Ion Mobility Reveals Structural Insight into Eicosanoid Product Ion Formation

Ion mobility measurements of product ions were used to characterize the collisional cross section (CCS) of various complex lipid [M-H]{sup −} ions using traveling wave ion mobility mass spectrometry (TWIMS). TWIMS analysis of various product ions derived after collisional activation of mono- and dihydroxy arachidonate metabolites was found to be more complex than the analysis of intact molecular ions and provided some insight into molecular mechanisms involved in product ion formation. The CCS observed for the molecular ion [M-H]{sup −} and certain product ions were consistent with a folded ion structure, the latter predicted by the proposed mechanisms of product ion formation. Unexpectedly, product ions from [M-H-H{sub 2}O-CO{sub 2}]{sup −} and [M-H-H{sub 2}O]{sup −} displayed complex ion mobility profiles suggesting multiple mechanisms of ion formation. The [M-H-H{sub 2}O]{sup −} ion from LTB{sub 4} was studied in more detail using both nitrogen and helium as the drift gas in the ion mobility cell. One population of [M-H-H{sub 2}O]{sup −} product ions from LTB{sub 4} was consistent with formation of covalent ring structures, while the ions displaying a higher CCS were consistent with a more open-chain structure. Using molecular dynamics and theoretical CCS calculations, energy minimized structures of those product ions with the open-chain structures were found to have a higher CCS than a folded molecular ion structure. The measurement of product ion mobility can be an additional and unique signature of eicosanoids measured by LC-MS/MS techniques. .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Homogeneous hydride formation path in α-Zr: Molecular dynamics simulations with the charge-optimized many-body potential

A formation path for homogeneous γ hydride formation in hcp α-Zr, from solid solution to the ζ and then the γ hydride, was demonstrated using molecular static calculations and molecular dynamic simulations with the charge-optimized many-body (COMB) potential. Hydrogen has limited solubility in α-Zr. Once the solubility limit is exceeded, the stability of solid solution gives way to that of coherent hydride phases such as the ζ hydride by planar precipitation of hydrogen. At finite temperatures, the ζ hydride goes through a partial hcp-fcc transformation via 1/3 <1¯100> slip on the basal plane, and transforms into a mixture of γ hydride and α-Zr. In the ζ hydride, slip on the basal plane is favored thermodynamically with negligible barrier, and is therefore feasible at finite temperatures without mechanical loading. The transformation process involves slips of three equivalent shear partials, in contrast to that proposed in the literature where only a single shear partial was involved. The adoption of multiple slip partials minimizes the macroscopic shape change of embedded hydride clusters and the shear strain accumulation in the matrix, and thus reduces the overall barrier needed for homogeneous γ hydride formation. In conclusion, this formation path requires finite temperatures for hydrogen diffusion without mechanical loading. Therefore, it should be effective at the cladding operating conditions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2019

Role of local stresses on co-zone twin-twin junction formation in HCP magnesium

Twin-twin interactions control the formation of twin-twin junctions (TTJ) in hexagonal metals when multiple twin variants are activated in a grain. In this work, we employ a combination of two computational techniques, a 3D full-field crystal plasticity model (CP) and large-scale molecular dynamics (MD), to study the TTJ formation associated with two non-parallel {101¯2} twins in Mg. The local intra-granular stresses generated by discrete twins are computed using a spatially resolved CP model. Atomic-scale knowledge regarding formation processes and local stresses is revealed by MD. The combined analyses suggest that the twin junction forms by the migration of the boundaries of both, the impinging and impinged twin, taking place in the immediate vicinity of the contact point. It is further shown that local stress fields that are generated after initial contact promote thickening of the impinging twin, and may facilitate nucleation of a new twin on the opposite boundary of the recipient twin. In conclusion, calculations of the strain energies suggest that formation of the co-zone twin-twin junction is energetically favorable but detwinning of the TTJ upon load reversal or under cyclic loading is not.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Local lattice distortion mediated formation of stacking faults in Mg alloys

Long periodic stacking ordered phases (LPSOs), consisting of various configurations of stacking faults, play an important role in developing ultrastrong Mg alloys with moderate ductility. However, their formation mechanisms are far from clear as no apparent defects are introduced during their formation as it is commonly believed that stacking faults are induced by defects. Here, we present the atomic and electronic basis for lattice-distortion-mediated formation of stacking faults, i.e., localized face-centredcubic (FCC) structures, within a Mg-Zn-Y alloy with a hexagonal close-packed (HCP) structure. The atomic motion trajectories from ab-initio molecular dynamic simulations show that the Mg atoms occupying the nearest neighbour positions of Zn and Y solute atoms undergo a local HCP-to-FCC transition. It is revealed that a local lattice distortion caused by the solute atoms enables the Mg atoms to move and rearrange into a local FCC configuration, which is validated by high resolution scanning transmission microscopy and in-situ synchrotron X-ray diffraction. Our simulations provide profound insight into the formation mechanism of stacking faults in HCP Mg and their physical nature of phase transformations. This is not only critically important because conventional defects, such as dislocations and vacancies, are important to deformation for Mg and its alloys, but also because they serve as a potential new approach to the design of advanced Mg alloys when defects could be used to facilitate

36 MATERIALS SCIENCE↗
DOE OSTI2019

Thick amorphous complexion formation and extreme thermal stability in ternary nanocrystalline Cu-Zr-Hf alloys

Building on the recent discovery of tough nanocrystalline Cu-Zr alloys with amorphous intergranular films, this paper investigates ternary nanocrystalline Cu-Zr-Hf alloys with a focus on understanding how alloy composition affects the formation of disordered complexions. Binary Cu-Zr and Cu–Hf alloys with similar initial grain sizes were also fabricated for comparison. The thermal stability of the nanocrystalline alloys was evaluated by annealing at 950 °C (>95% of the solidus temperatures), followed by detailed characterization of the grain boundary structure. All of the ternary alloys exhibited exceptional thermal stability comparable to that of the binary Cu-Zr alloy, and remained nanocrystalline even after two weeks of annealing at this extremely high temperature. Despite carbide formation and growth in these alloys during milling and annealing, the thermal stability of the ternary alloys is mainly attributed to the formation of thick amorphous intergranular films at high temperatures. Our results show that ternary alloy compositions have thicker boundary films compared to the binary alloys with similar global dopant concentrations. While it is not required for amorphous complexion formation, this work shows that having at least three elements present at the interface can lead to thicker grain boundary films, which is expected to maximize the previously reported toughening effect.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Nanotwin assisted reversible formation of low angle grain boundary upon reciprocating shear load

Severe plastic deformation of metals is known to lead to superior properties that cannot be achieved by any traditional metallurgic process. Origin of the superior properties is perceived to be closely associated with grain refinement, a fundamental process during the severe plastic deformation, which is essentially the formation of new grain boundaries. However, the atomistic mechanism of grain boundary formation remains largely obscure. Here, by using in-situ transmission electron microscopy and molecular dynamic simulation, we reveal, for the first time at atomic level, the shear-induced low-angle grain boundary (LAGB) formation processes in Au nanocrystal. In this work, we discover the LAGB formation is accomplished through inward propagation of nanotwins accompanied by dislocations gliding on the twin boundaries, a nanotwin-mediated dislocation slip mechanism, which shows reversible characteristic under reciprocating shear load and is affected by the nanocrystal microstructure and orientation. Our result unveils unprecedented atomistic insights on shear driven grain refinement towards nanostructure of superior properties.

36 MATERIALS SCIENCE↗
DOE OSTI2013

Amyloid fibril formation of peptides derived from the C-terminus of CETP modulated by lipids

Highlights: •The secondary structure of a C-terminal peptide derived from CETP was studied. •Lipids modulate secondary structure changes of a C-terminal peptide derived from CETP. •Lysophosphatidic acid maintains a functional α-helix and prevents fibril formation. •Transfer of lipids by CETP is related to the presence of an α-helix at its C-end. -- Abstract: Cholesteryl-ester transfer protein (CETP) is a plasmatic protein involved in neutral lipid transfer between lipoproteins. Focusing on the last 12 C-terminus residues we have previously shown that mutation D{sub 470}N promotes a conformational change towards a β-secondary structure. In turn, this modification leads to the formation of oligomers and fibrillar structures, which cause cytotoxic effects similar to the ones provoked by amyloid peptides. In this study, we evaluated the role of specific lipid arrangements on the structure of peptide helix-Z (D{sub 470}N) through the use of thioflavin T fluorescence, peptide bond absorbance, circular dichroism and electron microscopy. The results indicate that the use of micelles formed with lysophosphatidylcholine and lysophosphatidic acid (LPA) under neutral pH induce a conformational transition of peptide helix-Z containing a β-sheet conformation to a native α-helix structure, therefore avoiding the formation of amyloid fibrils. In contrast, incubation with phosphatidic acid does not change the profile for the β-sheet conformation. When the electrostatic charge at the surface of micelles or vesicles is regulated through the use of lipids such as phospholipid and LPA, minimal changes and the presence of β-structures were recorded. Mixtures with a positive net charge diminished the percentage of β-structure and the amount of amyloid fibrils. Our results suggest that the degree of solvation determined by the presence of a free hydroxyl group on lipids such as LPA is a key condition that can modulate the secondary structure and the consequent formation of amyloid fibrils in the highly flexible C-terminus domain of CETP.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2015

Cu(II) promotes amyloid pore formation

The aggregation of α-synuclein is associated with dopamine neuron death in Parkinson's disease. There is controversy in the field over the question of which species of the aggregates, fibrils or protofibrils, are toxic. Moreover, compelling evidence suggested the exposure to heavy metals to be a risk of PD. Nevertheless, the mechanism of metal ions in promoting PD remains unclear. In this research, we investigated the structural basis of Cu(II) induced aggregation of α-synuclein. Using transmission electron microscopy experiments, Cu(II) was found to promote in vitro aggregation of α-synuclein by facilitating annular protofibril formation rather than fibril formation. Furthermore, neuroprotective baicalein disaggregated annular protofibrils accompanied by considerable decrease of β-sheet content. These results strongly support the hypothesis that annular protofibrils are the toxic species, rather than fibrils, thereby inspiring us to search novel therapeutic strategies for the suppression of the toxic annular protofibril formation. - Highlights: • Cu(II) promoted the annular protofibril formation of α-synuclein in vitro. • Cu(II) postponed the in vitro fibrillization of α-synuclein. • Neuroprotective baicalein disaggregated annular protofibrils.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2016

Multivesicular body formation enhancement and exosome release during endoplasmic reticulum stress

The endoplasmic reticulum (ER) plays a pivotal role in maintaining cellular homeostasis. However, numerous environmental and genetic factors give rise to ER stress by inducing an accumulation of unfolded proteins. Under ER stress conditions, cells initiate the unfolded protein response (UPR). Here, we demonstrate a novel aspect of the UPR by electron microscopy and immunostaining analyses, whereby multivesicular body (MVB) formation was enhanced after ER stress. This MVB formation was influenced by inhibition of ER stress transducers inositol required enzyme 1 (IRE1) and PKR-like ER kinase (PERK). Furthermore, exosome release was also increased during ER stress. However, in IRE1 or PERK deficient cells, exosome release was not upregulated, indicating that IRE1- and PERK-mediated pathways are involved in ER stress-dependent exosome release. - Highlights: • Endoplasmic reticulum (ER) stress induces multivesicular body (MVB) formation. • ER stress transducers IRE1 and PERK mediate MVB formation. • Exosome release is enhanced after ER stress. • IRE1 or PERK deficiency blocks upregulation of ER stress-dependent exosome release.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

Ceramidase critically affects GPVI-dependent platelet activation and thrombus formation

Highlights: • Neither ceramide synthase nor serine palmitoyltransferase inhibition modifies GPVI-dependent platelet function. • Ceramidase inhibition impairs platelet aggregation, dense granule secretion and in vitro thrombus formation. • Impaired platelet function during ceramidase inhibition could be overcome by exogenous d-sphingosine. Platelet aggregation, dense granule secretion and thrombus formation are dependent on sphingolipids like ceramide and sphingosine as well as sphingosine-1 phosphate. Sphingosine/ceramide metabolism involves ceramide synthases and ceramidases. However, the role of ceramide synthase and ceramidase in the regulation of platelet function remained ill-defined. The present study determined transmission light aggregometry, employed luciferase based ATP release measurements and studied in vitro thrombus formation under high arterial shear rates in order to define the impact of pharmacological inhibition of serine palmitoyltransferase, ceramide synthase and ceramidase on platelet function. As a result, inhibition of ceramidase significantly blunted collagen related peptide (CRP) induced glyocoprotein VI (GPVI)-dependent platelet aggregation, ATP release and thrombus formation on a collagen-coated surface under shear rates of 1700{sup −sec}. Defective platelet aggregation after ceramidase inhibition could partially be overcome by exogenous sphingosine treatment reflecting a pivotal role of ceramidase-derived sphingosine in platelet function. Inhibition of serine palmitoyltransferase and ceramide synthase did not significantly modify GPVI-dependent platelet activation. In conclusion, the present study unraveled ceramidase as a crucial player in sphingosine-induced platelet activation following GPVI-dependent signaling.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

Cooperation of Rho family proteins Rac1 and Cdc42 in cartilage development and calcified tissue formation

Highlights: • Generation of Rac1 and Cdc42 double conditional knockout mice in cartilage. • Phenotypes of both deletions in cartilage were severer than those of single deletion. • Rac1 and Cdc42 play cooperating roles in regulation of cartilage and bone formation. Rac1 and Cdc42, Rho family low molecular weight G proteins, are intracellular signaling factors that transmit various information from outside to inside cells. Primarily, they are known to control various biological activities mediated by actin cytoskeleton reorganization, such as cell proliferation, differentiation, and apoptosis. In order to investigate the functions of Rac1 and Cdc42 in bone formation, we prepared cartilage-specific double conditional knockout mice, Rac1{sup fl/fl}; Cdc42{sup fl/fl}; Col2-Cre (Rac1: Cdc42 dcKO mice), which died just after birth, similar to Cdc42{sup fl/fl}; Col2-Cre mice (Cdc42 cKO mice). Our findings showed that the long tubule bone in Rac1: Cdc42 dcKO mice was shorter than that in Rac1{sup fl/fl}; Col2-Cre mice (Rac1 cKO mice) and Cdc42 cKO mice. Abnormal skeleton formation was also observed and disordered columnar formation in the growth plate of the Rac1: Cdc42 dcKO mice was more severe as compared to the Rac1 cKO and Cdc42 cKO mice. Together, these results suggest that Rac1 and Cdc42 have cooperating roles in regulation of bone development.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

Augmented neutrophil extracellular traps formation promotes atherosclerosis development in socially defeated apoE −/− mice

Highlights: • Repeated social defeat exaggerates plaque size in apoE{sup −/−} mice. • Proportion of circulating neutrophils is significantly increased in defeated mice. • In vivo NETs formation is exaggerated within the atherosclerotic lesions in defeated mice. • DNase I treatment abrogates pro-atherogenic effect of RSD exposure. • In vitro NETs formation is exaggerated in BM PMN-MDSC from defeated mice. Depression is an independent risk factor of cardiovascular disease (CVD); however, the causal association remains undefined. We exposed mice to repeated social defeat (RSD) to precipitate depressive-like behaviors, and investigated the effects on atherosclerosis. Eight-week-old male apoE{sup −/−} mice were exposed to RSD by housing with a larger CD-1 mouse in a shared home cage. They were subjected to vigorous physical contact daily for 10 consecutive days and fed a high-cholesterol diet (HCD) for 6 weeks. The social interaction ratio and immobility time showed dramatic social avoidance before and after HCD feeding. Defeated mice showed higher increase in atherosclerotic lesion areas in the aortic root and entire aorta than control mice. Mean blood pressure and lipid profile were equivalent in both groups. While Ly-6G- and Mac3-positive areas in the aortic root were comparable between the groups, citrullinated histone H3 (Cit-H3)- and myeloperoxidase (MPO)-positive areas, markers of neutrophil extracellular traps (NETs), were significantly increased in the defeated mice. Treatment with DNase I completely diminished the exaggerated atherosclerosis. The proportion of peripheral blood polymorphonuclear myeloid-derived suppressor cells (PMN-MDSC), but not of inflammatory monocytes, was markedly increased. Moreover, in vitro NETs formation from bone marrow (BM) PMN-MDSC was markedly augmented, accompanied by higher expression of Nox2 gene and reactive oxygen species. Our findings demonstrate that exposure to RSD promotes atherosclerosis by augmenting NETs formation within the plaque. This provides new insight into the underlying mechanism of depression-related CVD.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

Ectopic vascularized bone formation by human umbilical cord-derived mesenchymal stromal cells expressing bone morphogenetic factor-2 and endothelial cells

Highlights: • MSCs and ECs from human UC were stably isolated and characterized. • Generate hBMP-2 expressing hUC-MSCs using adenoviral system. • Ectopic vascularized bone formation via transplantation of hBMP-2-MSCs and HUVECs. • hBMP-2 and HUVECs enhance ossification and vascular structure formation. Mesenchymal stromal cells (MSCs) isolated from numerous tissues including human fetal tissue are currently used in cell therapy and regenerative medicine. Among fetal tissues, the umbilical cord (UC) is one of the sources for both MSCs and endothelial cells (ECs). To establish ectopic vascularized bone tissue formation, UC-derived MSCs and ECs were isolated. UC-MSCs expressing human BMP-2 (hBMP-2-MSCs) were generated using an adenoviral system to promote bone formation. These cells were then transplanted with Matrigel into the subcutaneous tissue of an immune deficient NSG mouse, and bone tissue was analyzed after several weeks. The osteogenic differentiation ability of MSCs was elevated by transduction of the hBMP-2 expressing adenoviral system, and vascularization of bone tissue was enhanced by human umbilical vein endothelial cells (HUVEC). In this study, our results provide evidence that MSCs and HUVECs from human umbilical cord are suitable cells to investigate bone tissue engineering. The results also suggest that the co-transplantation of hBMP2-MSCs and HUVECs may be a simple and efficient strategy for improving tissue generation and angiogenesis in bone tissue engineering using stem cells.

60 APPLIED LIFE SCIENCES↗