Search NASA⌕ Search

SEARCH · Search NASA

Results for “geometry factor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

On the variational noncommutative poisson geometry

We outline the notions and concepts of the calculus of variational multivectors within the Poisson formalism over the spaces of infinite jets of mappings from commutative (non)graded smooth manifolds to the factors of noncommutative associative algebras over the equivalence under cyclic permutations of the letters in the associative words. We state the basic properties of the variational Schouten bracket and derive an interesting criterion for (non)commutative differential operators to be Hamiltonian (and thus determine the (non)commutative Poisson structures). We place the noncommutative jet-bundle construction at hand in the context of the quantum string theory.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Probabilistic Simulation of Stress Concentration in Composite Laminates

A computational methodology is described to probabilistically simulate the stress concentration factors (SCF's) in composite laminates. This new approach consists of coupling probabilistic composite mechanics with probabilistic finite element structural analysis. The composite mechanics is used to probabilistically describe all the uncertainties inherent in composite material properties, whereas the finite element is used to probabilistically describe the uncertainties associated with methods to experimentally evaluate SCF's, such as loads, geometry, and supports. The effectiveness of the methodology is demonstrated by using is to simulate the SCF's in three different composite laminates. Simulated results match experimental data for probability density and for cumulative distribution functions. The sensitivity factors indicate that the SCF's are influenced by local stiffness variables, by load eccentricities, and by initial stress fields.

Chamis, C. C.↗

Experimental Investigation of Low-Frequency Distributed Acoustic Strain-Rate Responses to Propagating Fractures

Summary Low-frequency distributed acoustic sensing (LF-DAS) responds to strain changes due to far-field fracture propagation. To better understand the LF-DAS response to fracture propagation, we performed laboratory-scale hydraulic fracture experiments with embedded optical strain sensors. The objectives of this research are to generate hydraulic fractures of known geometry, measure the strain response along the embedded fiber-optic cable comparable to LF-DAS measurements, and use the results to inform the interpretation of field-derived LF-DAS data. The experiments were conducted in unconfined transparent cubic blocks with a dimension of 8 in. on each side. The block was made of transparent epoxy to visualize the fracture propagation. Fiber-optic sensing cables were embedded in the block at different distances to the source of injection. We injected dyed water through an injection tubing to generate a transverse, radial fracture along an initial flaw. An optical interrogator recorded the response of offset fiber Bragg grating (FBG) strain sensors normal to the plane of the fracture. The strain data were visualized on a waterfall plot, akin to visualizations of field-derived LF-DAS data. Dimensional analysis was used to scale the laboratory results to field conditions. We compared the evolution of the strain response at the fiber-optic cable, injection pressure, and rate with known fracture geometry. The measured strains were compared with Sneddon’s (1946) linear elastic solution for a penny-shaped crack and found to follow this behavior. The generated radial fractures in transparent media can be modeled with Sneddon’s linear elastic radial fracture model and a Mode I critical stress intensity factor. The LF-DAS characteristic response of a narrowing region of extension surrounded by compression was exhibited as a fracture that approached and intersected the fiber-optic cable. The experimentally derived strain and strain-rate waterfall plots with known fracture geometry, injection rate, and pressure response provide insight in understanding LF-DAS responses in the field. Furthermore, we developed a method to estimate fracture geometry evolution from the fiber-optic strain data and validated the method against the experimental data.

Engineering↗

Stress intensity factors in a cracked infinite elastic wedge loaded by a rigid punch

A plane elastic wedge-shaped solid was split through the application of a rigid punch. It was assumed that the coefficient of friction on the the contact area was constant, and the problem had a plane of symmetry with respect to loading and geometry, with the crack in the plane of symmetry. The problem was formulated in terms of a system of integral equations with the contact stress and the derivative of the crack surface displacement as the unknown functions. The solution was obtained for an internal crack and for an edge crack. The results include primarily the stress intensity factors at the crack tips, and the measure of the stress singularity at the wedge apex, and at the end points of the contact area.

Erdogan, F.↗

Analytical simulation of meander morphology from equilibrium to long-term evolution: Impacts of channel geometry and vegetation-induced coarsening

This study introduces an innovative approach to modeling meandering river morphology, integrating and investigating the effects of geometric characteristics and vegetation-induced channel coarsening. The developed comprehensive framework combines several advanced techniques: Genetic Programming for refining the scour factor of transverse bed slope, a Leaf Area Index (LAI)-enhanced analytical model for quantifying vegetative flow resistance, and an upstream-weighted moving average method for efficient approximation of the convolution integral in meander migration calculations. The model is validated against both an idealized Kinoshita meander and a natural bend of the Tumen River (China) in equilibrium, demonstrating its robustness across diverse scales and conditions. The model's ability to simulate the long-term evolution, including cutoff events, provides valuable insight for river management strategies. The current findings demonstrate that channel geometry, particularly width-to-depth ratio, plays a dominant role in meander evolution, with wider channels prone to more complex and rapid morphological changes. Vegetation effects are most pronounced in channels with moderate width-to-depth ratios, where they can significantly influence migration rates and bed topography. A combination of channel widening and deepening, coupled with strategic vegetation management, can effectively enhance navigability while maintaining channel stability in the studied Tumen River reach. Sensitivity analyses highlight the complex interplay between hydraulic conditions, sediment characteristics, and vegetation in shaping river morphology. This research advances understanding of the multifaceted nature of meandering river systems and offers practical tools for informed decision-making in river engineering and environmental management, particularly in the context of climate change and increasing anthropogenic pressures on fluvial ecosystems.

54 ENVIRONMENTAL SCIENCES↗

Geometry-Dependent Solidification Regimes in Metal Additive Manufacturing

Recent modeling and experimental work in additive manufacturing has suggested that cross-sectional geometry may play a significant role in the local development of the solidification structure through its influence on the heat source path. This effect has been rationalized as the transition from a quasi-static point heat source regime, to a regime dominated by the quasi-static motion of an equivalent line source. This work provides a simple analytical framework for determining the conditions under which a system transitions between these regimes. Here, a transient semi-analytical heat transfer model is used to examine a wide range of process conditions and material properties. A simple analytical expression is derived and shown to accurately predict the transition between solidification regimes over these conditions. The functional form of this expression is then used to help understand the importance of various material properties, process parameters, and geometric factors on the characteristics of the solidification conditions. This approach may be used as a simple guideline for optimizing process conditions in response to variations in cross-sectional geometry to produce more consistent microstructural distributions in additively manufactured components.

36 MATERIALS SCIENCE↗

Cosmic Axion Background detection using resonant cavity arrays

The axion is a well-motivated and generic extension of the Standard Model. If produced in the early universe, axions may still be relativistic today, forming a Cosmic Axion Background (CaB) potentially detectable in direct detection experiments. Although CaB is expected to be broadband, which makes it challenging to be detected, a high-quality-factor microwave cavity acts as a narrowband filter with response peaked at its resonant frequency. We propose a new strategy using multi-cavity arrays to distinguish signal from background noise by exploiting spatial correlations of the axion-induced electric field which are set by the cavity quality factor. We compute the two-point correlation function for electric fields in spatially separated cavities sourced by an isotropic CaB. Analyzing various cavity geometries, we find that stacked, wide-base cavity arrays offer coherent enhancement of the axion signal. We apply our formalism to prospective upgrades of the ADMX experiment, including configurations with four and eighteen coupled cavities. Although these arrays do not achieve a coherent enhancement, optimizing the geometry could potentially yield an $\mathcal{O}(1)$ improvement in the sensitivity to the CaB.

Axions and ALPs↗

Potential benefits of cool walls on residential and commercial buildings across California and the United States: Conserving energy, saving money, and reducing emission of greenhouse gases and air pollutants

Solar-reflective “cool” walls reduce absorption of sunlight by the building envelope, which may decrease cooling load in warm weather and increase heating load in cool weather. Changes to annual heating, ventilation, and air conditioning (HVAC) energy use depend on climate, wall construction, wall orientation, building geometry, HVAC efficiency, and operating schedule. Changes to annual energy cost and energy-related emissions further vary with local energy prices and emission factors. In this work, we used EnergyPlus to perform over 100,000 whole-building energy simulations, spanning 10 different building categories, three building vintages, 16 California climate zones, and 15 United States (U.S.) climate zones. We find that cool walls yielded annual source energy, energy cost, and emission savings in all California climate zones and in warm U.S. (ASHRAE) climate zones. In California, annual whole-building HVAC energy cost savings were 4.0–27% in single-family homes, 0.5–3.8% in medium office buildings, and 0.0–8.5% in stand-alone retail stores. In warm U.S. climates—zones 1A (Miami, FL) through 4B (Albuquerque, NM)—annual HVAC energy cost savings were 1.8–8.3% in single-family homes, 0.3–4.6% in medium office buildings, and 0.5–11% in stand-alone retail stores. California and U.S. fractional source energy and emission savings were comparable to fractional energy cost savings. Per unit surface area modified, cool-wall savings often exceeded cool-roof savings because building codes typically prescribe much less wall insulation than roof insulation.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Plasmonic Surface Lattice Resonances: Theory and Computation

In overview, plasmonic surface lattice resonances (Plasmonic SLRs) are mixed light-matter states emergent in a system of periodically arranged metallic nanoparticles (NPs) under the constraint that the array spacing is approximately equal to an integer multiple of the wavelength of optical frequency light divided by the index of refraction of the surrounding medium. The properties of SLRs derive from two separate physical effects; the electromagnetic (plasmonic) response of metal NPs, and the electromagnetic states (photonic cavity modes) associated with the array of NPs. Metal NPs, especially free electron metals such as silver, gold, aluminum and alkali metals, support optical-frequency electron density oscillations known as localized surface plasmons (LSPs). The high density of conduction-band electrons for these metals gives rise to plasmon excitations that strongly couple to light even for particles that are several orders of magnitude smaller than the wavelength of the excitation source. In this sense, LSPs have the remarkable ability to squeeze far-field light into intensely-localized near-electric-fields that can enhance the intensity of light by factors of ~ 10 3 or more. Moreover, due to advances in the synthesis and fabrication of NPs, the intrinsic dependence of LSPs on NP geometry, composition, and size can readily be exploited to design NPs with a wide range of optical properties. One drawback in using LSPs to enhance optical, electronic, or chemical processes is the losses introduced into the system by via dephasing and Ohmic damping - an effect which must either be tolerated or mitigated. Plasmonic SLRs enable the mitigation of loss effects through the coupling of LSPs to diffractive states that arise from arrays satisfying Bragg scattering conditions, also known as Rayleigh anomalies (RAs). Bragg modes are well known for arrays of dielectric NPs, where they funnel and trap incoming light into the plane of the lattice, defining a photonic cavity. The low losses and narrow linewidths associated with dielectric NPs produce Bragg modes that oscillate for ~ 10 3 - 10 4 cycles before decaying. These modes are of great interest to the meta-materials community but have relatively weak electric fields associated with dielectric NPs, and therefore are not used for applications where local field enhancements are needed. Plasmonic lattices, i.e., photonic crystals composed of metallic NPs, combine the characteristics from both LSPs and diffractive states, enabling both enhanced local fields and narrow linewidth excitations, in many respects providing the best advantages of both materials. Thus, by controlling the periodicity and global symmetry of the lattice, in addition to the material composition and shape of the constituent NPs, SLRs can be designed to simultaneously survive for up to 10 3 cycles while maintaining the electric field enhancements near the NP surface that have made the use of LSPs ubiquitous in nanoscience. Modern fabrication methods allow for cm 2 -scale patches of two-dimensional (2D) arrays that are composed of approximately one trillion NPs, making them effectively infinite at the nanoscale. Because of these advances, it is now possible to experimentally realize SLRs with properties that approach those predicted by idealized theoretical models. In this Account, we introduce the fundamental theory of both SLRs and SLR-mediated lasing, where the latter is one of the most important applications of plasmonic SLRs that has emerged to date. The focus of this article is on theoretical concepts for describing plasmonic SLRs and computational methods used for their study, but throughout we emphasize physical insights provided by the theory that aid in making applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Optical Bound States in the Continuum Enabled by Magnetic Resonances Coupled to a Mirror

Dielectric metasurfaces made of high refractive index and low optical loss materials have emerged as promising platforms to achieve high-quality factor modes enabling strong light–matter interaction. Bound states in the continuum have shown potential to demonstrate narrow spectral resonances but often require asymmetric geometry and typically feature strong polarization dependence, complicating fabrication and limiting practical applications. Here, we introduce a novel approach for designing high-quality bound states in the continuum using magnetic dipole resonances coupled to a mirror. The resulting metasurface has simple geometric parameters requiring no broken symmetry. To demonstrate the unique features of our photonic platform we show a record-breaking third harmonic generation efficiency from the metasurface benefiting from the strongly enhanced electric field at high-quality resonances. Our approach mitigates the shortcomings of previous platforms with simple geometry enabling facile and large-area fabrication of metasurfaces paving the way for applications in optical sensing, detection, quantum photonics, and nonlinear devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Ultrasound guided fluorescence molecular tomography with improved quantification by an attenuation compensated born-normalization and in vivo preclinical study of cancer

Ultrasound imaging, having the advantages of low-cost and non-invasiveness over MRI and X-ray CT, was reported by several studies as an adequate complement to fluorescence molecular tomography with the perspective of improving localization and quantification of fluorescent molecular targets in vivo. Based on the previous work, an improved dual-modality Fluorescence-Ultrasound imaging system was developed and then validated in imaging study with preclinical tumor model. Ultrasound imaging and a profilometer were used to obtain the anatomical prior information and 3D surface, separately, to precisely extract the tissue boundary on both sides of sample in order to achieve improved fluorescence reconstruction. Furthermore, a pattern-based fluorescence reconstruction on the detection side was incorporated to enable dimensional reduction of the dataset while keeping the useful information for reconstruction. Due to its putative role in the current imaging geometry and the chosen reconstruction technique, we developed an attenuation compensated Born-normalization method to reduce the attenuation effects and cancel off experimental factors when collecting quantitative fluorescence datasets over large area. Results of both simulation and phantom study demonstrated that fluorescent targets could be recovered accurately and quantitatively using this reconstruction mechanism. Finally, in vivo experiment confirms that the imaging system associated with the proposed image reconstruction approach was able to extract both functional and anatomical information, thereby improving quantification and localization of molecular targets.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

GAMMA-RAY LIGHT CURVES FROM PULSAR MAGNETOSPHERES WITH FINITE CONDUCTIVITY

We investigate the shapes of {gamma}-ray pulsar light curves using three-dimensional pulsar magnetosphere models of finite conductivity. These models, covering the entire spectrum of solutions between vacuum and force-free magnetospheres, for the first time afford mapping the GeV emission of more realistic, dissipative pulsar magnetospheres. To this end we generate model light curves following two different approaches: (1) We employ the emission patterns of the slot and outer gap models in the field geometries of magnetospheres with different conductivity {sigma}. (2) We define realistic trajectories of radiating particles in magnetospheres of different {sigma} and compute their Lorentz factor under the influence of magnetospheric electric fields and curvature radiation-reaction; with these at hand we then calculate the emitted radiation intensity. The light curves resulting from these prescriptions are quite sensitive to the value of {sigma}, especially in the second approach. While still not self-consistent, these results are a step forward in understanding the physics of pulsar {gamma}-radiation.

79 ASTRONOMY AND ASTROPHYSICS↗

Twists and turns: stacking and structure-dependent optical response in MoS 2 nanoscrolls

Transition metal dichalcogenide (TMD) nanoscrolls (NSs), specifically MoS 2 NSs, present unique structural and optical properties, exhibiting prominent photoluminescence (PL) signals despite their multilayer nature. Here, this study investigates the structural and spectroscopic characteristics of MoS 2 NSs, correlating them to show the effects of reduced interlayer interactions on excitons of MoS 2 NSs. The reduction in interlayer interaction arises from two main factors: (1) symmetry-broken mixed stacking due to misalignment between layers and (2) a highly inhomogeneous strain profile generated by the Archimedean spiral geometry with positive eccentricity. Transmission electron microscopy, field emission scanning electron microscopy, atomic force microscopy, Raman spectroscopy, and second harmonic generation measurements confirm these findings. Low-temperature PL spectroscopy explores the impact of reduced interlayer interactions on exciton properties such as exciton–phonon coupling and oscillator strength. This study provides crucial insights into the structure, stacking and unique optical properties of TMD NSs, advancing the understanding of interlayer interactions and their impacts in complex quasi-one-dimensional nanostructures.

25 ENERGY STORAGE↗

Cryogenic single-port calibration for superconducting microwave resonator measurements

Superconducting circuit testing and materials loss characterization requires robust and reliable methods for the extraction of internal and coupling quality factors of microwave resonators. Additionally, a common method, imposed by limitations on the device design or experimental configuration, is the single-port reflection geometry, i.e. reflection-mode. However, impedance mismatches in cryogenic systems must be accounted for through calibration of the measurement chain while it is at low temperatures. In this paper, we demonstrate a data-based, single-port calibration using commercial microwave standards and a vector network analyzer with samples at millikelvin temperature in a dilution refrigerator, making this method useful for measurements of quantum phenomena. Finally, we cross reference our data-based, single-port calibration and reflection measurement with over-coupled 2D- and 3D-resonators against well established two-port techniques corroborating the validity of our method.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electric field enhancement between two parallel cylinders due to plasmonic resonance

We theoretically examine the electric field enhancement in the narrow gap between two parallel cylinders due to the plasmonic resonance. The resonance condition and the field enhancement factor are found explicitly. It is shown that the resonance occurs at frequencies lower than the plasma frequency. This effect results from the special geometry: the gap width between parallel cylinders is much smaller than their radii. It is also shown that the enhancement coefficient is much larger than the one for a single cylinder and is determined together with the resonance frequency by the system geometry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nb₃Sn Coating of Twin Axis Cavity for SRF Applications

The twin axis cavity with two identical accelerating beams has been proposed for energy recovery linac (ERL) applications. Nb₃Sn is a superconducting material with a higher critical temperature and a higher critical field as compared to Nb, which promises a lower operating cost due to higher quality factors. Two niobium twin axis cavities were fabricated at JLab and were proposed to be coated with Nb₃Sn. Due to their more complex geometry, the typical coating process used for basic elliptical cavi-ties needs to be improved to coat these cavities. This development advances the current coating system at JLab for coating complex cavities. Two twin axis cavities were coated recently for the first time. This contribution dis-cusses initial results from coating of twin axis cavities, RF testing and witness sample analysis with an overview of the current challenges towards high performance Nb₃Sn coated twin axis cavities.

43 PARTICLE ACCELERATORS↗

LEU Fission Plate: Experimental Prototype Design Document

The Ultracold Neutron (UCN) source at LANSCE is currently the source of the highest density of UCN in the world. We intend to use innovative new solutions to boost our UCN density in order to maintain our leadership in this competitive field. Prior studies suggest that a fission plate neutron multiplier made from low enriched uranium (LEU) installed between our spallation target and UCN source moderator can boost the density by up to a factor of ten. Here we present a prototype of this idea that uses an existing one liter volume of LEU that can boost the UCN density by roughly a factor of 2. Additional simulation studies presented here also suggest that we may find more gains by replacing some of the moderator or reflector geometries with beryllium.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Printed Strain Gauges for High Temperature Applications (>300°C)

The real-time understanding of strain and deformation of materials provides prognostic health monitoring of components of current operational reactors and valuable data that shortens the timeline for the development of new nuclear-relevant materials in test reactor experiments. This report discusses the current development and testing of additively manufactured strain gauges. This has potential to improve the sensor design and manufacturing techniques to meet the requirements of the current and advanced nuclear reactors (i.e., in terms of environment conditions, sample geometry, and materials compatibility). The developmental additively manufactured strain gauges are exposed to separate effects testing (i.e., mechanical strain, high temperature) to determine environmental factors that affect the strain gauge. In addition, sensor qualification methodologies are further developed for determining the reliability and robustness at the interface of the AM strain gauge materials.

36 MATERIALS SCIENCE↗