Search NASA⌕ Search

SEARCH · Search NASA

Results for “ionic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Physical Properties and CO2 Reaction Pathway of 1-Ethyl-3-Methylimidazolium Ionic Liquids with Aprotic Heterocyclic Anions

Ionic liquids (ILs) with aprotic heterocyclic anions (AHA) are attractive candidates for CO2 capture technologies. In this study, a series of AHA ILs with 1-ethyl-3-methylimidazolium ([emim](+)) cations were synthesized, and their physical properties (density, viscosity, and ionic conductivity) were measured. In addition, CO2 solubility in each IL was determined at room temperature using a volumetric method at pressures between 0 and 1 bar. The AHAs are basic anions that are capable of reacting stoichiometrically with CO2 to form carbamate species. An interesting CO2 uptake isotherm behavior was observed, and this may be attributed to a parallel, equilibrium proton exchange process between the imidazolium cation and the basic AHA in the presence of CO2, followed by the formation of "transient" carbene species that react rapidly with CO2. The presence of the imidazolium-carboxylate species and carbamate anion species was verified using H-1 and C-13 NMR spectroscopy. While the reaction between CO2 and the proposed transient carbene resulted in cation-CO2 binding that is stronger than the anion-CO2 reaction, the reactions of the imidazolium AHA ILs were fully reversible upon regeneration at 80 degrees C with nitrogen purging. The presence of water decreased the CO2 uptake due to the inhibiting effect of the neutral species (protonated form of AHA) that is formed.

Seo, S↗

Anion-Functionalized Task-Specific Ionic Liquids: Molecular Origin of Change in Viscosity upon CO 2 Capture

The structure and dynamics of a task-specific ionic liquid (TSIL), trihexyl(tetradecyl)phosphonium imidazolate, before and after absorbing CO 2 were studied with a molecular dynamics (MD) simulation. This particular ionic liquid is one of several newly discovered azole-based TSILs for equimolar CO 2 capture. Unlike other TSILs whose viscosity increases drastically upon reaction with CO 2 , its viscosity decreases after CO 2 absorption. This unique behavior was confirmed in our MD simulation. In this study, we find that after CO 2 absorption the translational dynamics of the whole system is accelerated, accompanied by an accelerated rotational dynamics of the cations. Radial distribution function and spatial distribution function analyses show that the anions become asymmetric after reaction with CO 2 , and this causes the imbalance of the interaction between the positive and negative regions of the ions. The interaction between the phosphorus atom of the cation and oxygen atoms of the carboxyl group on the anion is enhanced, while that between the phosphorus atom and the naked nitrogen atom of the anion is weakened. The ion-pair correlation functions further support that the weakened interaction leads to faster dissociation of cation–anion pairs, thereby causing an accelerated dynamics. Hence, the asymmetry of anions influences the dynamics of the system and affects the viscosity. In conclusion, this insight may help design better TSILs with decreased viscosity for CO 2 capture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Self-Assembly of Lyotropic Chromonic Liquid Crystal Sunset Yellow and Effects of Ionic Additives

Lyotropic chromonic liquid crystals (LCLCs) are formed by molecules with ionic groups at the periphery that associate into stacks through noncovalent self-assembly while in water. The very existence of the nematic (N) phase in the typical LCLC, the dye Sunset Yellow (SSY) is a puzzle, as the correlation length associated with the stacking, as measured in the X-ray experiments, is too short to explain the orientational order by the Onsager model. We propose that the aggregates can be more complex than simple rods and contain 'stacking faults' such as junctions with a shift of neighboring molecules, 3-fold junctions, etc. We study how ionic additives, such as salts of different valency and pH-altering agents, alter the N phase of SSY purified by recrystallization. The additives induce two general trends: (a) stabilization of the N phase, caused by the mono and divalent salts (such as NaCl), and evidenced by the increase of the N-to-I transition temperature and the correlation length; (b) suppression of the N phase manifested in the decrease of the N-to-I transition temperature and in separation of the N phase into a more densely packed N phase or the columnar (C) phase, coexisting with a less condensed I phase. The scenario (b) can be triggered by simply increasing pH (adding NaOH). The effects produced by tetravalent spermine fall mostly into the category (b), but the detail depends on whether this additive is in its salt form or a free base form. The base form causes changes through changes in pH and possible excluded volume effects whereas the salt form might disrupt the structure of SSY aggregates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interfacial Restructuring of Ionic Liquids Determined by Sum-Frequency Generation Spectroscopy and X-ray Reflectivity

Surface sum-frequency generation spectroscopy and X-ray reflectivity were used to study the surface of [BMIM][X] ionic liquids (BMIM = 1-butyl-3-methylimidazolium cation, X = BF{sub 4}{sup -}, PF{sub 6}{sup -}, and I{sup -}). Sum-frequency signal strength from the terminal methyl groups of the cation at the surface indicates that the topmost surface of these ionic liquids is occupied by polar-oriented hydrophobic butyl chains having approximately 1/3 of the in-plane density of fully packed alkyl chains as observed by the same method for the hexadecanol Langmuir monolayer. X-ray reflectivity data reveal a layer with density larger than that of bulk. However, the reflectivity is not sufficiently sensitive to the exact location of this layer either at the vacuum interface or sandwiched between the bulk and the low-density alkyl chain, as observed in the sum-frequency measurements. Analysis of the reflectivity data in conjunction with the sum-frequency spectra strongly suggests the molecules forming the topmost layer are on average polar-oriented with their (loosely packed) butyl chains toward the gas/liquid interface, while the (densely packed) imidazolium cores/anions are in contact with the bulk liquid.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Capacitive Energy Storage from - 50o to 100o Using an Ionic Liquid Electrolyte

Relying on redox reactions, most batteries are limited in their ability to operate at very low or very high temperatures. While performance of electrochemical capacitors is less dependent on the temperature, present-day devices still cannot cover the entire range needed for automotive and electronics applications under a variety of environmental conditions. We show that the right combination of the exohedral nanostructured carbon (nanotubes and onions) electrode and a eutectic mixture of ionic liquids can dramatically extend the temperature range of electrical energy storage, thus defying the conventional wisdom that ionic liquids can only be used as electrolytes above room temperature. We demonstrate electrical double layer capacitors able to operate from 50 to 100 C over a wide voltage window (up to 3.7 V) and at very high charge/discharge rates of up to 20 V/s.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Molecular mechanism of gas adsorption into ionic liquids: A molecular dynamics study

Room temperature ionic liquids (RTILs) have been shown to be versatile and tunable solvents that can be used in many chemical applications. In this study, we developed a dynamical, molecular-scale picture of the gas dissolution and interfacial processes in RTILs using molecular simulations. These simulations can provide the free energies associated with transporting a gas solute across various RTIL interfaces and physical insights into the interfacial properties and transport molecular mechanism of gas sorption processes. For CO2 sorption, the features in the potential of mean force (PMF) of CO2 using both polarizable and non-polarizable force fields are similar qualitatively. However, we observed some quantitative differences, and we describe the causes of these differences in this paper. We also show the significant impact of ionic-liquid chemical structures on the gas sorption process, and we discuss their influence on the H2O transport mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Glued Langmuir-Blodgett bilayers from calix[ n ]arenes: Influence of calix[ n ]arene size on ionic cross-linking, film thickness, and permeation selectivity

A homologous series of calix[4]arene-, calix[5]arene- and calix[6]arene-based surfactants, containing pendant trimethylammonium and n-hexadecyl groups, have been compared with respect to their ability (i) to undergo ionic crosslinking at the air/water interface, (ii) to incorporate poly(4-styrenesulfonate) (PSS) in Langmuir-Blodgett (LB) bilayers, and (iii) to act as barriers towards He, N 2 and CO 2 when assembled into crosslinked LB bilayers. As these calix[n]arenes increase in size, their ability to undergo ionic crosslinking has been found to increase, the thickness of corresponding glued LB bilayers has been found to decrease, and their barrier properties and permeation selectivities have been found to increase. In conclusion, the likely origin for these effects and the probable mechanism by which He, N 2 and CO 2 cross these ultrathin films are discussed.

36 MATERIALS SCIENCE↗

A Computational Study of Dicationic Ionic Liquids/CO 2 Interfaces

Our recent studies on CO 2 capture using dicationic ionic liquids (DILs) demonstrated that DILs are promising absorbents for CO 2 uptake especially compared with monocationic ionic liquids (MILs) analogues, in which each cation carries single positive charge in contrast to two unit charges of a dication. However, DILs/CO 2 interfacial properties at the molecular level are still unknown. This work investigated the CO 2 absorption properties of representative DILs, 1-alkyl-3-dimethylimidazolium bis(trifluoromethylsulfonyl)imide, [C n (mim) 2 ](Tf 2 N) 2 (n = 3, 6, 12), using molecular dynamics (MD) simulations. The higher interfacial CO 2 density at DIL than that at MIL interfaces suggests the increased CO 2 interaction sites in DILs. The interfacial CO 2 density also exhibits an alkyl chain length dependence which decreases with the elongation of alkyl chain and proportionally correlates with the content of fluorine atoms at interfaces. Different alkyl chain orientations in DILs were illustrated in contrast to those of MILs; both DILs and CO2 inside DILs exhibit lower diffusivity than MILs, in agreement with the stronger cation–anion binding energy of DILs. Moreover, DILs show a lower H2O and N2 uptake from flue gas compared with MILs, implicating the higher CO 2 /H 2 O and CO 2 /N 2 selectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Self-Assembly of Metal-Oxide Nanoparticles into Hierarchically Patterned Porous Architectures using Ionic Liquid/Oil Emulsions

Hierarchically patterned macroporous TiO2 structures can be fabricated via the spontaneous self-assembly of TiO2 nanoparticles prepared using a mixture of 1-octadecene (ODE) and an ODE-immiscible 1-alkyl-3-methylimidazolium-based ionic liquid as the reaction medium. A study of the influence of side chain lengths of ionic liquids (n = 4, 8, or 16) reveals that this parameter can be further used to fine-tune the morphologies of the products. This synthetic methodology can also be extended to the formation of patterned macroporous ZrO2 and Fe3O4 structures. Finally, the potential reasons for the formation of hierarchical structures are discussed and the implications to further research are proposed.

Zhou, Shenghu↗

Mapping Irreversible Electrochemical Processes on the Nanoscale: Ionic Phenomena in Li-ion Conductive Glass Ceramics

A scanning probe microscopy approach for mapping local irreversible electrochemical processes based on detection of bias-induced frequency shifts of cantilevers in contact with the electrochemically active surface is demonstrated. Using Li-ion conductive glass ceramic as a model, we demonstrate near unity transference numbers for ionic transport and establish detection limits for current-based and strain based detection. The tip-induced electrochemical process is shown to be a first order transformation and nucleation potential is close to the Li-metal reduction potential. Spatial variability of the nucleation bias is explored and linked to the local phase composition. These studies both provide insight into nanoscale ionic phenomena in practical Li-ion electrolyte, and also open pathways for probing irreversible electrochemical, bias-induced, and thermal transformations in nanoscale systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Local detection of activation energy for ionic transport in lithium cobalt oxide

Local activation energy for ionic diffusion is probed on the nanometer level in LiCoO{sub 2} thin films using variable temperature electrochemical strain microscopy (ESM). The high spatial resolution of ESM allows one to extract information about ionic activation energies on the level of individual grains and grain facets, thus bridging the lengths scales of atomistic calculations and traditional macroscopic experiments. A series of control experiments have been performed and possible signal generating mechanisms are discussed to explain the temperature-dependent ESM measurements.

36 MATERIALS SCIENCE↗

Ionic High-Pressure Form of Elemental Boron

This Letter presents the results of high-pressure experiments and ab initio evolutionary crystal structure predictions, and found a new boron phase that we named gamma-B28. This phase is comprised of icosahedral B12 clusters and B2 pairs in a NaCl-type arrangement, stable between 19 and 89 GPa, and exhibits evidence for charge transfer (for which our best estimate is delta approximately 0.48) between the constituent clusters to give (B2)delta+(B12)delta-. We have recently found that the same high-pressure boron phase may have given rise to the Bragg reflections reported by Wentorf in 1965 (ref. 1), although the chemical composition was not analysed and the data (subsequently deleted from the Powder Diffraction File database) seems to not have been used to propose a structure model. We also note that although we used the terms 'partially ionic' and 'ionic' to emphasize the polar nature of the high-pressure boron phase and the influence this polarity has on several physical properties of the elemental phase, the chemical bonding in gamma-B28 is predominantly covalent.

36 MATERIALS SCIENCE↗

Structural control of mixed ionic and electronic transport in conducting polymers

Poly(3,4-ethylenedioxythiophene) doped with poly(styrenesulfonate), PEDOT:PSS, has been utilized for over two decades as a stable, solution-processable hole conductor. While its hole transport properties have been the subject of intense investigation, recent work has turned to PEDOT:PSS as a mixed ionic/electronic conductor in applications including bioelectronics, energy storage and management, and soft robotics. Conducting polymers can efficiently transport both holes and ions when sufficiently hydrated, however, little is known about the role of morphology on mixed conduction. Here, we show that bulk ionic and electronic mobilities are simultaneously affected by processing-induced changes in nano- and meso-scale structure in PEDOT:PSS films. We quantify domain composition, and find that domain purification on addition of dispersion co-solvents limits ion mobility, even while electronic conductivity improves. We show that an optimal morphology allows for the balanced ionic and electronic transport that is critical for prototypical mixed conductor devices. As a result, these findings may pave the way for the rational design of polymeric materials and processing routes to enhance devices reliant on mixed conduction.

36 MATERIALS SCIENCE↗

Structural and magnetic depth profiles of magneto-ionic heterostructures beyond the interface limit

Electric field control of magnetism provides a promising route towards ultralow power information storage and sensor technologies. The effects of magneto-ionic motion have been prominently featured in the modification of interface characteristics. Here, we demonstrate magnetoelectric coupling moderated by voltage-driven oxygen migration beyond the interface in relatively thick AlO x /GdO x /Co(15 nm) films. Oxygen migration and Co magnetization are quantitatively mapped with polarized neutron reflectometry under electro-thermal conditioning. The depth-resolved profiles uniquely identify interfacial and bulk behaviours and a semi-reversible control of the magnetization. Magnetometry measurements suggest changes in the microstructure which disrupt long-range ferromagnetic ordering, resulting in an additional magnetically soft phase. X-ray spectroscopy confirms changes in the Co oxidation state, but not in the Gd, suggesting that the GdO x transmits oxygen but does not source or sink it. These results together provide crucial insight into controlling magnetism via magneto-ionic motion, both at interfaces and throughout the bulk of the films.

36 MATERIALS SCIENCE↗

Ionic Liquid Gating Control of RKKY Interaction in FeCoB/Ru/FeCoB and (Pt/Co) 2 /Ru/(Co/Pt) 2 Multilayers.

To overcome the fundamental challenge of the weak natural response of antiferromagnetic materials under a magnetic field, voltage manipulation of antiferromagnetic interaction is developed to realize ultrafast, high-density, and power efficient antiferromagnetic spintronics. Here, we report a low voltage modulation of Ruderman–Kittel–Kasuya–Yosida (RKKY) interaction via ionic liquid gating in synthetic antiferromagnetic multilayers of FeCoB/Ru/FeCoB and (Pt/Co) 2 /Ru/(Co/Pt) 2 . At room temperature, the distinct voltage control of transition between antiferromagnetic and ferromagnetic ordering is realized and up to 80% of perpendicular magnetic moments manage to switch with a small-applied voltage bias of 2.5 V. We related this ionic liquid gating-induced RKKY interaction modification to the disturbance of itinerant electrons inside synthetic antiferromagnetic heterostructure and the corresponding change of its Fermi level. In conclusion, voltage tuning of RKKY interaction may enable the next generation of switchable spintronics between antiferromagnetic and ferromagnetic modes with both fundamental and practical perspectives.

36 MATERIALS SCIENCE↗

Atomically dispersed Pb ionic sites in PbCdSe quantum dot gels enhance room-temperature NO2 sensing

Abstract Atmospheric NO 2 is of great concern due to its adverse effects on human health and the environment, motivating research on NO 2 detection and remediation. Existing low-cost room-temperature NO 2 sensors often suffer from low sensitivity at the ppb level or long recovery times, reflecting the trade-off between sensor response and recovery time. Here, we report an atomically dispersed metal ion strategy to address it. We discover that bimetallic PbCdSe quantum dot (QD) gels containing atomically dispersed Pb ionic sites achieve the optimal combination of strong sensor response and fast recovery, leading to a high-performance room-temperature p-type semiconductor NO 2 sensor as characterized by a combination of ultra–low limit of detection, high sensitivity and stability, fast response and recovery. With the help of theoretical calculations, we reveal the high performance of the PbCdSe QD gel arises from the unique tuning effects of Pb ionic sites on NO 2 binding at their neighboring Cd sites.

36 MATERIALS SCIENCE↗

Neural network potentials with effective charge separation for non-equilibrium dynamics of ionic solids: a ZnO case study

Developing neural network potentials (NNPs) accurate under non-equilibrium dynamics is challenging, as such systems require extensive sampling beyond equilibrium phases. Here we construct high-fidelity NNPs for zinc oxide (ZnO), a polymorphic ionic solid, using density functional theory (DFT) reference data. To efficiently capture transitional configurations, we combine enhanced-sampling molecular dynamics with empirical potentials, data distillation, and pretraining on short-range atomic energies (A-Train), followed by transfer learning with DFT-relabeled datasets. This hierarchical approach improves transferability across polymorphs and stress states. We further introduce effective charge separation, treating long-range Coulombic terms analytically while short-range residual interactions are learned by the NNP. The optimal effective charges fall in the range 0.5–1.0 q e , consistent with dielectric-screened values derived from formal charges but distinct from Bader estimates. Motivated by this observation, we propose a simple data-driven protocol in which effective charges are optimized by comparing DFT reference energies with explicit Coulomb calculations, without additional NNP training. This strategy improves accuracy and transferability in DFT-level predictions of energies, forces, and stress. Together, these results provide a practical charge-selection framework for robust NNP development in ionic solids, enabling reliable simulation of polymorphic phase transformations and non-equilibrium dynamics.

Chemistry↗

Triple ionic–electronic conducting oxides for next-generation electrochemical devices

Triple ionic–electronic conductors (TIECs) are materials that can simultaneously transport electronic species alongside two ionic species. The recent emergence of TIECs provides intriguing opportunities to maximize performance in a variety of electrochemical devices, including fuel cells, membrane reactors and electrolysis cells. However, the potential application of these nascent materials is limited by lack of fundamental knowledge of their transport properties and electrocatalytic activity. The goal of this Review is to summarize and analyse the current understanding of TIEC transport and electrochemistry in single-phase materials, including defect formation and conduction mechanisms. In this work, we particularly focus on the discovery criteria (for example, crystal structure and ion electronegativity), design principles (for example, cation and anion substitution chemistry) and operating conditions (for example, atmosphere) of materials that enable deliberate tuning of the conductivity of each charge carrier. Lastly, we identify important areas for further advances, including higher chemical stability, lower operating temperatures and discovery of n-type TIEC materials.

25 ENERGY STORAGE↗