Search NASA⌕ Search

SEARCH · Search NASA

Results for “morphological stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Cyclic CO{sub 2} chemisorption–desorption behavior of Na{sub 2}ZrO{sub 3}: Structural, microstructural and kinetic variations produced as a function of temperature

A structural, microstructural and kinetic analysis of the Na{sub 2}ZrO{sub 3}–CO{sub 2} system was performed over 20 chemisorption–desorption cycles. Different cyclic experiments were performed between 500 and 800 °C. Although the best results were obtained in Na{sub 2}ZrO{sub 3} sample treated at 550 °C, all the samples treated between 500 and 700 °C presented good CO{sub 2} chemisorption efficiencies and stabilities. On the contrary, Na{sub 2}ZrO{sub 3} sample treated at 800 °C presented a continuous decrement of the CO{sub 2} chemisorption. After 20 cycles all the samples presented a partial Na{sub 2}ZrO{sub 3} decomposition, determined by the ZrO{sub 2} formation, which was associated to sodium sublimation. Additionally, the Na{sub 2}ZrO{sub 3} microstructural analysis showed a systematic morphological evolution. It was microscopically observed that Na{sub 2}ZrO{sub 3} particles tend to fracture due to the Na{sub 2}CO{sub 3} formation. Later, after several cycles these tiny fractured particles sinter producing new polyhedral and dense Na{sub 2}ZrO{sub 3}–ZrO{sub 2} particles. Finally, an exhaustive kinetic analysis showed a high CO{sub 2} chemisorption–desorption stability at different temperatures. - Graphical abstract: A CO{sub 2} chemisorption–desorption analysis was performed in the Na{sub 2}ZrO{sub 3}–CO{sub 2} system. Different cyclic experiments were performed between 500 and 800 °C and the results showed high CO{sub 2} chemisorption efficiencies. Nevertheless the Na{sub 2}ZrO{sub 3} composition and microstructure evolved during the cycles. Highlights: • Different CO{sub 2} chemisorption–desorption cycles were performed in the Na{sub 2}ZrO{sub 3} phase. • Na{sub 2}ZrO{sub 3} presents interesting microstructural changes depending on temperature. • At T≤550 °C, Na{sub 2}ZrO{sub 3} presents the best cyclability due to microstructural factors. • At T≥600 °C, Na{sub 2}ZrO{sub 3} presents a partial decomposition after 20 cycles. • Na{sub 2}ZrO{sub 3} presents excellent CO{sub 2} cyclability properties.

36 MATERIALS SCIENCE↗

Hydrochloric Acid Hydrolysis of Pulps from Oil Palm Empty Fruit Bunches to Produce Cellulose Nanocrystals

Cellulose nanocrystals (CNCs) were successfully isolated by hydrochloric acid hydrolysis followed by ultrasonic homogenization of oil palm empty fruit bunches (OPEFB), which are a major form of agricultural waste in Southeast Asia. Currently sulfuric acid is mainly used in CNC preparation to achieve high dispersibility; however, we demonstrated that CNC suspensions prepared from OPEFB by hydrochloric acid hydrolysis remained stable without any sedimentation over 6 months. The obtained CNCs were fully characterized by elemental analysis, electron microscopic observation, X-ray diffraction measurement, and thermal analysis. The OPEFB-derived CNCs exhibited higher aspect ratios of 23–29 and higher thermal stability of 347–359 °C as maximum degradation temperature, as compared with those of woody CNCs prepared by sulfuric acid hydrolysis (15 and 311 °C, respectively). Although as-prepared CNCs showed comparable morphological and physicochemical properties to those prepared from oil palm biomass by other methods including sulfuric acid hydrolysis, use of hydrochloric acid and ultrasonication for hydrolysis of OPEFB was effective to yield crystalline CNCs with long-term nanodispersibility showing clear birefringence. Graphical Abstract: .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solid state 59 Co NMR study of a Np(VII) compound

Np(VII) compounds with [Co(NH 3 ) 6 ] 3+ cations were synthesized and structurally examined using powder X-ray diffraction. Multiple phases were observed, consisting of octahedral [Co(NH 3 ) 6 ] 3+ cations, discrete tetragonal bipyramidal [NpO 4 (OH) 2 ] 3− anions, and waters of hydration. Electric field gradient tensors at Co sites were measured by solid state 59 Co nuclear magnetic resonance (NMR) spectroscopy and compared with theoretical calculations. The relative contributions of the chemical shift and electric field tensors to the NMR lineshape were determined by recording spectra at field strengths of 7.04 and 11.74 Tesla. Further, the evolution of structure and morphology as a function of sample age and the effects on NMR spectral parameters has also been investigated. These results demonstrate the use of NMR at multiple fields to expand understanding of the stability and electronic structure of high valent neptunium compounds.

heptavalent neptunium↗

Solution-Phase Synthesis and Photoluminescence of Quaternary Chalcohalide Semiconductors

Mixed-metal chalcohalide semiconductors have emerged as promising candidates for photovoltaic applications. However, preparation of these multinary compounds using solution-phase techniques remains particularly challenging compared to traditional solid-state methods. To fully harness their potential, it is desirable to develop synthetic methods that enable control over both the phase purity and dimensionality of chalcohalides. In this work, we report the solution-phase synthesis of Pb 2 SbS 2 I 3 and Pb 2 BiS 2 I 3 quaternary chalcohalides using readily available precursors. Fine tuning of reaction parameters allows for the isolation of rod-like morphologies with tunable diameters and aspect ratios. The quaternary chalcohalides display photoluminescence as an ensemble as well as at the single particle level, as demonstrated using fluorescence microscopy. We further evaluate the relative stability and band gap of Pb 2 SbS 2 I 3 polymorphs and their coloring patterns using electronic structure calculations. The synthetic methods developed here will motivate the study of ever more complex chalcohalides and other multinary semiconductors for new technological applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Light Induced Interfacial Phenomena in Atomically thin 2D Van der Waals Material Hybrids and Heterojunctions

Atomically thin 2D van Der Waals (2D-vDW) materials have attracted significant attention for optoelectronic applications in photodetectors, photovoltaics, quantum information science. Their atomically thin thickness, however, renders them poor absorbers. Hybrid structures of 2D-vDW materials assembled with other semiconducting materials, such as quantum dots, nanowires, polymers, other 2D-vDW materials or 3D bulk materials, have provided an elegant way to increase light harvesting and carrier generation via interfacial charge and energy transfer interactions. Here we present recent examples focused on the characterization of interfacial charge transfer and energy transfer in 2D-vDW hybrids and heterostructures and methods to modulate and control these processes through bandgap engineering, morphology engineering and external factors. Lastly, we discuss potential future directions of research, including scalability from micron-sized flake-based devices to wafer size for commercial deployment, issues with long term stability and performance and the ability to extend the spectral range of these 2D hybrids.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Current-induced surface roughness reduction in conducting thin films

Thin film surface roughness is responsible for various materials reliability problems in microelectronics and nanofabrication technologies, which requires the development of surface roughness reduction strategies. Toward this end, we report modeling results that establish the electrical surface treatment of conducting thin films as a physical processing strategy for surface roughness reduction. We develop a continuum model of surface morphological evolution that accounts for the residual stress in the film, surface diffusional anisotropy and film texture, film’s wetting of the layer that is deposited on, and surface electromigration. Supported by linear stability theory, self-consistent dynamical simulations based on the model demonstrate that the action over several hours of a sufficiently strong and properly directed electric field on a conducting thin film can reduce its surface roughness and lead to a smooth planar film surface. In conclusion, the modeling predictions are in agreement with experimental measurements on copper thin films deposited on silicon nitride layers.

36 MATERIALS SCIENCE↗

Dynamic SU(2) structure from seven-branes

We obtain a family of supersymmetric solutions of type IIB supergravity with dynamic SU(2) structure, which describe the local geometry near a stack of four D7-branes and one O7-plane wrapping a rigid four-cycle. The deformation to a generalized complex geometry is interpreted as a consequence of nonperturbative effects in the seven-brane gauge theory. We formulate the problem for seven-branes wrapping the base of an appropriate del Pezzo cone, and in the near-stack limit in which the four-cycle is flat, we obtain an exact solution in closed form. Our solutions serve to characterize the local geometry of nonperturbatively-stabilized flux compactifications.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Pt and Hf Additions to NiAl Bond Coats and Their Effect on the Lifetime of Thermal Barrier Coatings

The lifetimes of thermal barrier coatings (TBC's) with various NiAlPt(HfZr) bond coats were determined by cyclic oxidation testing at 1163 C (2125 F). The bond coats were sprayed from powders by low pressure plasma spraying onto Rene N5 superalloy substrates. Yttria stabilized zirconia (8YSZ) top coats were applied by air plasma spraying. Surprisingly, there was not a strong correlation between TBC lifetime and Pt or Hf content although Zr additions decreased lifetimes. TBC failure morphologies and bond coat microstructures were examined and are discussed with respect to the bond coat compositions.

Nesbitt, J. A.↗

Rotating Disk Slurry Au Electrodeposition at Unsupported Carbon Vulcan XC-72 and Ce 3+ Impregnation for Ethanol Oxidation in Alkaline Media

A robust electrodeposition method consisting of the rotating disk slurry electrode (RoDSE) technique to obtain Au nanoparticles highly dispersed on a conductive carbonaceous support, i.e., Vulcan XC-72R, for ethanol electrooxidation reaction in alkaline media was developed. Ceria was used as a cocatalyst using a Ce(III)-EDTA impregnation method in order to enhance the catalytic activity and improve the catalyst’s overall stability. Furthermore, the RoDSE method used to obtain highly dispersed Au nanoparticles does not require the use of a reducing agent or stabilizing agent, and the noble-metal loading was controlled by the addition and tuning of the metal precursor concentration. Inductively coupled plasma and thermogravimetric analysis indicated that the Au loading in the catalyst was 9 %. We determined the particle size and characteristic Au fcc crystal facets by X-ray diffraction. The morphology of the catalyst was also investigated using electron microscopy techniques. In addition, X-ray absorption spectroscopy was used to corroborate the presence and identify the oxidation state of Ce in the system and to observe if there are any electronic interactions within the 8 % Au/CeO x /C system. Cyclic voltammetry of electrodeposited 9 % Au/C and Ce-promoted 8 % Au/C showed a higher catalytic current density for ethanol oxidation when compared with commercially available catalysts (20 % Au/C) of a higher precious metal loading. Additionally, we report a higher stability toward the ethanol electrooxidation process, which was corroborated by 1 mV/s linear sweep voltammetry and chronoamperometric studies.

36 MATERIALS SCIENCE↗

Medium controlled aggregative growth as a key step in mesoporous silica nanoparticle formation

Near monodisperse mesoporous silica nanoparticles (MSN) represent a promising and rapidly developing type of mesoporous silica materials; however, the vast data on their synthesis remains unorganized and ill-understood. We systematically studied the formation of MSN under basic and neutral conditions using various temperatures, CTAB concentrations, hydrolyzing agents (triethanolamine, ammonia, phosphate buffers), and media with different colloidal stabilization properties (with ethanol as a cosolvent and monovalent salts). In the typical conditions for the preparation of stable MSN colloids, the particle size was controlled by colloidal stabilization by the medium (solvent type, ionic strength, and surfactant concentration) in agreement with the “aggregative growth” mechanism, rather than by solely the hydrolysis and condensation rates conventionally used for data interpretation in the classical nucleation theory. Medium properties (pH, ion types and concentration, polarity) also defined the efficiency of silica-surfactant cooperative self-assembly, which directly affected the porosity, mesopore size and pore wall thickness. Interestingly, this traditional silica-surfactant route showed a limited effect on the particle size, emphasizing the dominating role of colloidal stabilization in the studied reaction conditions. In situ pH measurements showed that every reaction medium has unique pH evolution profiles depending on the buffer capacity, hydrolysis and condensation rates. Reaction systems that fail to maintain the working pH can lead to non-porous products or undesired particle morphology and size distribution. The established particle formation mechanism allowed us to formulate comprehensive guidelines for preparing relatively concentrated colloids of near monodisperse (PDI 5–15%) mesoporous 30–700 nm silica spheres with variable porosity and mesopore size. Here, these findings will be particularly useful in designing new mesoporous silica-containing materials for biomedical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermal Stability of Quasi-1D NbS 3 Nanoribbons and Their Transformation to 2D NbS 2 : Insights from in Situ Electron Microscopy and Spectroscopy

Here in situ electron microscopy imaging and spectroscopy enabled us to study the evolution of quasi-1D NbS 3 -IV nanoribbons with respect to morphology and chemical structure at temperatures between room temperature and 1000 °C. Scanning transmission electron microscopy (STEM) experiments included imaging in the secondary electron, (transmitted) bright field, and high-angle annular dark-field modes while operating in the low kV regime. The results showed that NbS 3 -IV samples transform dramatically from smooth nanoribbons into highly textured configurations featuring polyhedral divots and steps. Similar in situ heating experiments conducted with aberration-corrected STEM revealed that bilayers of NbS 3 -IV chains convert topotactically into aligned 2H-NbS 2 sheets upon loss of sulfur. Atomic resolution imaging, fast Fourier transform analysis, and electron energy loss spectroscopy confirmed these chemical changes, from which we propose an atomistic mechanism for the NbS 3 -IV → 2H-NbS 2 conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Targeted modulation of pennycress lipid droplet proteins impacts droplet morphology and seed oil content

SUMMARY Lipid droplets (LDs) are unusual organelles that have a phospholipid monolayer surface and a hydrophobic matrix. In oilseeds, this matrix is nearly always composed of triacylglycerols (TGs) for efficient storage of carbon and energy. Various proteins play a role in their assembly, stability and turnover, and even though the major structural oleosin proteins in seed LDs have been known for decades, the factors influencing LD formation and dynamics are still being uncovered mostly in the “model oilseed” Arabidopsis. Here we identified several key LD biogenesis proteins in the seeds of pennycress, a potential biofuel crop, that were correlated previously with seed oil content and characterized here for their participation in LD formation in transient expression assays and stable transgenics. One pennycress protein, the lipid droplet associated protein‐interacting protein (LDIP), was able to functionally complement the Arabidopsis ldip mutant, emphasizing the close conservation of lipid storage among these two Brassicas. Moreover, loss‐of‐function ldip mutants in pennycress exhibited increased seed oil content without compromising plant growth, raising the possibility that LDIP or other LD biogenesis factors may be suitable targets for improving yields in oilseed crops more broadly.

Guzha, Athanas↗

Hydrogen Fuel Cells and Storage Technology: Fundamental Research for Optimization of Hydrogen Storage and Utilization

Design and development of improved low-cost hydrogen fuel cell catalytic materials and high-capacity hydrogenn storage media are paramount to enabling the hydrogen economy. Presently, effective and durable catalysts are mostly precious metals in pure or alloyed form and their high cost inhibits fuel cell applications. Similarly, materials that meet on-board hydrogen storage targets within total mass and volumetric constraints are yet to be found. Both hydrogen storage performance and cost-effective fuel cell designs are intimately linked to the electronic structure, morphology and cost of the chosen materials. The FCAST Project combined theoretical and experimental studies of electronic structure, chemical bonding, and hydrogen adsorption/desorption characteristics of a number of different nanomaterials and metal clusters to develop better fundamental understanding of hydrogen storage in solid state matrices. Additional experimental studies quantified the hydrogen storage properties of synthesized polyaniline(PANI)/Pd composites. Such conducting polymers are especially interesting because of their high intrinsic electron density and the ability to dope the materials with protons, anions, and metal species. Earlier work produced contradictory results: one study reported 7% to 8% hydrogen uptake while a second study reported zero hydrogen uptake. Cost and durability of fuel cell systems are crucial factors in their affordability. Limits on operating temperature, loss of catalytic reactivity and degradation of proton exchange membranes are factors that affect system durability and contribute to operational costs. More cost effective fuel cell components were sought through studies of the physical and chemical nature of catalyst performance, characterization of oxidation and reduction processes on system surfaces. Additional development effort resulted in a new hydrocarbon-based high-performance sulfonated proton exchange membrane (PEM) that can be manufactured at low cost and accompanied by improved mechanical and thermal stability.

25 ENERGY STORAGE↗

V2O5 nanowires-graphene composite as an outstanding electrode material for high electrochemical performance and long-cycle-life supercapacitor

Highlights: • V{sub 2}O{sub 5} nanowires anchored on the surface of rGO sheets using facile hydrothermal method for energy storage application. • High gravimetric capacitance of 1002 F g{sup −1} has been achieved at the current density of 1 A g{sup −1} in an aqueous electrolyte. • Exceptionally high energy density of 116 Wh kg{sup −1} has been obtained using supercapacitor coin cell. • Composite (V{sub 2}O{sub 5}-NW-G) exhibits excellent cyclic stability with 83.94 % capacitance retention after 5000 GCD cycles. - Abstract: A composite of V{sub 2}O{sub 5} nanowires with reduced graphene oxide (V{sub 2}O{sub 5}-NW-G) has been prepared using facile hydrothermal method and tested for charge storage supercapacitor application. Morphological and structural aspects of as prepared materials has been studied using material characterization techniques like transmission electron microscope (TEM), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). The nanosized wires like structure of V{sub 2}O{sub 5} anchored on the graphene (rGO) sheets possesses improved electrical conductivity and high surface area. Electrochemical properties of the synthesized materials have been studied using cyclic voltammetry (CV), galvanostatic charge-discharge (GCD) and electrochemical impedance spectroscopy (EIS). Composite (V{sub 2}O{sub 5}-NW-G) exhibits exceptional properties like high gravimetric capacitance of 1002 F g{sup −1} along with good cyclic stability of 83.94% capacitance retention after 5000 repetitive GCD cycles. Excellent energy density of 116 Wh kg{sup −1} has been obtained at the power density of 1520 W kg{sup −1}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

One-pot electrochemical preparation of BiOCl/BiPO{sub 4} double-layer heterojunction film with efficient photocatalytic performance

Highlights: • A novel BiOCl/BiPO{sub 4} heterojunction film has been synthesized by one-pot electrochemical method. • The as-prepared BiOCl/BiPO{sub 4} heterojunction film exhibited high photocatalytic activity and stability. • The plausible formation process of BiOCl/BiPO{sub 4} heterojunction film has been proposed and demonstrated. • The photocatalytic mechanism of phenol degradation presented by BiOCl/BiPO{sub 4} heterojunction film was investigated and analyzed. - Abstract: A BiOCl/BiPO{sub 4} double-layer heterojunction film on metal Bi plate with reduced recombination of photo-induced carriers has been successfully prepared by one-step electrochemical anodization process. The morphology characterizations displayed that the double-layer film consisted of BiPO{sub 4} rods array at the bottom and BiOCl nanosheets on the top. Meanwhile, the control experiments indicated that the BiPO{sub 4} rods array was transformed by BiOCl rather than Bi{sup 3+} reacting with PO{sub 4}{sup 3−} directly. In addition, the resulting BiOCl/BiPO{sub 4} heterojunction film exhibited excellent photocatalytic activity and stability on the degradation of phenol comparing with pure BiOCl film. Transient photocurrent measurements and PL spectra proved that the enhanced photocatalytic performance of BiOCl/BiPO{sub 4} heterojunction film was attributed to the effective separation of photo-generated electron-hole pairs excited on BiOCl. Moreover, ·O{sub 2}{sup −} and ·OH played a crucial role in the photodegradation process of phenol. Based on these analytical results, a plausible photocatalytic mechanism has been proposed.

36 MATERIALS SCIENCE↗

EFFECT OF SODIUM HYDROXIDE AND SUPERCRITICAL FLUID TREATMENTS ON UNRETTED KENAF FIBERS

Kenaf fibers have been gaining great interest for use in the fabrication of both thermoset and thermoplastic composites. However, the inherent fiber surface properties limit their application. In response to the uneconomical, energy inefficient and environmentally unfavorable issues of the standard fiber retting process, we applied chemical modifications of kenaf fibers as alternative retting treatments and investigated the overall performance of the modified fibers. Alkaline solution and super critical alcohol were used as fiber treatments and their effects on the fiber properties were compared. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used to characterize the thermal properties of fibers. The change of in chemical composition of the fibers with treatment is discussed in the context of the thermal decomposition behavior. The cellulose crystal structure and total crystallinity of the kenaf fibers were characterized by X-ray diffraction (XRD). Field emission scanning electron microscopy (SEM) was employed to examine the morphological changes of fiber surface and fiber cross-section after both alkaline and super critical alcohol treatments. The mechanical behavior of fibers before and after treatment was explored by tenacity testing and the fracture mechanism was evidenced by observing the fracture surfaces. The effect of chemical treatment duration on the fiber performance was also discussed. It was found that the alkaline treated kenaf fibers showed higher thermal stability than untreated fibers, while TGA results indicated that supercritical alcohol was more efficient in removing the non-cellulosic portions. XRD data confirmed the removal of amorphous structural components such as pectin, hemicellulose and lignin as well as amorphous cellulose for the treated kenaf fibers. SEM images showed that both treatments were effective in removing impurities and coating materials on the fiber surface. The rough fracture morphology observed by SEM indicates that ultimate fibril pull-out occurred.

natural fiber composite↗

Hydrothermal stability of SAPO-34 for refrigeration and air conditioning applications

Graphical abstract: The SAPO-34 was synthesized by a hydrothermal method using diethylamine as a template. Water adsorption strength on SAPO-34 is between that on 13X and A type silica gel. During 100–400 Pa, the water uptake on SAPO-34 increases sensitively to pressure, and equilibrium water uptake reaches 0.35 kg/kg, 25% higher than 13X. SAPO-34 shows no significant reduced cyclic water uptake over 60 cycles. Most of the initial SAPO-34 phase is restored, while the regular cubic-like morphology is well maintained, and the specific surface area only decreases by 8.6%. - Highlights: • Water adsorption strength on SAPO-34 is between that on 13X and A type silica gel. During 100–400 Pa, the water uptake on SAPO-34 increases sensitively to pressure, and equilibrium water uptake reaches 0.35 kg/kg, 25% higher than 13X. • SAPO-34 with diethylamine as the template shows no significant reduced cyclic water uptake over 60 cycles, and most of the initial SAPO-34 phase is well maintained. • SAPO-34 has an excellent adsorption performance and a good hydrothermal stability, thus is promising for application in adsorption refrigeration. - Abstract: Hydrothermal stability is one of the crucial factors in applying SAPO-34 molecular sieve to adsorption refrigration. The SAPO-34 was synthesized by a hydrothermal method using diethylamine as a template. Both a vacuum gravimetric method and an intelligent gravimetric analyzer were applied to analyze the water adsorption performance of SAPO-34. Cyclic hydrothermal performance was determined on the modified simulation adsorption refrigeration test rig. Crystal phase, morphology, and porosity of SAPO-34 were characterized by X-ray diffraction, scanning electron microscopy, and N{sub 2} sorption, respectively. The results show that, water adsorption strength on SAPO-34 is between that on 13X and A type silica gel. During 100–400 Pa, the water uptake on SAPO-34 increases sensitively to pressure, and equilibrium water uptake reaches 0.35 kg/kg, 25% higher than 13X. SAPO-34 shows no significant reduced cyclic water uptake over 60 cycles. Most of the initial SAPO-34 phase is restored, while the regular cubic-like morphology is well maintained, and the specific surface area only decreases by 8.6%.

36 MATERIALS SCIENCE↗

Flexible transparent conducting electrodes unexpectedly influence MAPbI 3 film morphology and perovskite solar cell performance

Fabricating perovskite solar cells (PSCs) on plastic substrates will enable cost-effective manufacturing of lightweight and portable energy systems. Here, we study the influence of flexible transparent conductive electrodes (TCEs) on the methylammonium lead iodide (MAPbI3) film morphology and PSC performance. Three types of TCEs on polyethylene terephthalate (PET) are compared: a custom-made AgNWs/indium zinc oxide hybrid TCE and two commercial substrates with indium tin oxide (ITO) or metal/insulator/metal (MIM) as the TCE. Using the same p-i-n architecture and hole transport layer (HTL), we find that PSCs fabricated on the hybrid TCE show better performance and stability compared to those made on commercial TCEs. The PSC performance enhancement is attributed to the superior structural and optical properties of MAPbI3 film deposited on the hybrid TCE, which is explained by the surface energy difference of the HTL. While it is anticipated that solar cell performance can be affected by TCEs’ transmittance and sheet resistance as they determine light absorption and carrier transport, respectively, our finding of TCE influencing the morphology and crystallinity of MAPbI3 film, and hence PSC performance, is unexpected.

14 SOLAR ENERGY↗