Search NASA⌕ Search

SEARCH · Search NASA

Results for “packing simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

SDSS-V Algorithms: Fast, Collision-free Trajectory Planning for Heavily Overlapping Robotic Fiber Positioners

Robotic fiber positioner (RFP) arrays are becoming heavily adopted in wide-field massively multiplexed spectroscopic survey instruments. RFP arrays decrease nightly operational overheads through rapid reconfiguration between fields and exposures. In comparison to similar instruments, SDSS-V has selected a very dense RFP packing scheme where any point in a field is typically accessible to three or more robots. This design provides flexibility in target assignment. However, the task of collisionless trajectory planning is especially challenging. We present two multiagent distributed control strategies that are highly efficient and computationally inexpensive for determining collision-free paths for RFPs in heavily overlapping workspaces. We demonstrate that a reconfiguration path between two arbitrary robot configurations can be efficiently found if a “folded” state, in which all robot arms are retracted and aligned in a lattice-like orientation, is inserted between the initial and final states. Although developed for SDSS-V, the approach we describe is generic and thus applicable to a wide range of RFP designs and layouts. Robotic fiber positioner technology continues to advance rapidly, and in the near future ultra-densely packed RFP designs may be feasible. Our algorithms are especially capable in routing paths in very crowded environments, where we see efficient results even in regimes significantly more crowded than the SDSS-V RFP design.

42 ENGINEERING↗

Modified equilibrium-dispersive model for the interpretation of the efficiency of columns packed on core-shell particle

A modified Equilibrium Dispersive (ED) Model is proposed for the modeling of chromatographic processes in columns packed with shell-particle adsorbents and operated under very high pressures. This new model was validated on the basis of experimental results obtained with 2.1 mm x 150 mm columns packed with superficially porous 1.7 {micro}m Kinetex-C{sub 18} particles and with classical columns packed with 1.7 {micro}m BEH-C{sub 18} fully porous particles. The influence of the heat friction on the performance of these columns was analyzed by comparing the experimental and calculated peak profiles. Moreover a theoretical analysis of the influence the solid-core conductivity on the column efficiency was discussed.

36 MATERIALS SCIENCE↗

Direct Air Capture Using Aqueous Amino Acid Solvents in a Crossflow Absorber

Carbon dioxide (CO 2 ) is the most abundant of all greenhouse gases (GHGs). CO 2 levels in the atmosphere are 50% higher than in the preindustrial era, trapping heat. CO 2 removal from the atmosphere by direct air capture (DAC) is needed to achieve the internationally agreed global temperature goals. The most common CO 2 capture technology is absorption by aminebased solvents in packed columns. Amino acid solutions have recently gained attention due to their advantages over traditional amine solvents. To be implemented effectively, DAC industrial processes need to handle large airflow rates in separation absorbers. The large air and solvent flow rates preclude the use of countercurrent columns due to high-pressure drops and the occurrence of flooding. Crossflow air−liquid absorbers are used to handle large air and liquid volumes due to their lower-pressure drop. The objective of this work is to study the influence of crossflow absorber geometric parameters and operating conditions on product formation and process efficiency. An already derived theoretical model for countercurrent absorbers has been modified to simulate the operation of a crossflow DAC absorber. The predictive model was implemented into a computer code that was used to study the efficiency of the processes as geometric equipment dimensions and operating parameters vary. Practical suggestions are made to design more efficient DAC processes.

Absorption↗

HTR-PROTEUS Pebble Bed Experimental Program Cores 1, 1A, 2, and 3: Hexagonal Close Packing with a 1:2 Moderator-to-Fuel Pebble Ratio

In its deployment as a pebble bed reactor (PBR) critical facility from 1992 to 1996, the PROTEUS facility was designated as HTR-PROTEUS. This experimental program was performed as part of an International Atomic Energy Agency (IAEA) Coordinated Research Project (CRP) on the Validation of Safety Related Physics Calculations for Low Enriched HTGRs. Within this project, critical experiments were conducted for graphite moderated LEU systems to determine core reactivity, flux and power profiles, reaction-rate ratios, the worth of control rods, both in-core and reflector based, the worth of burnable poisons, kinetic parameters, and the effects of moisture ingress on these parameters. Four benchmark experiments were evaluated in this report: Cores 1, 1A, 2, and 3. These core configurations represent the hexagonal close packing (HCP) configurations of the HTR-PROTEUS experiment with a moderator-to-fuel pebble ratio of 1:2. Core 1 represents the only configuration utilizing ZEBRA control rods. Cores 1A, 2, and 3 use withdrawable, hollow, stainless steel control rods. Cores 1 and 1A are similar except for the use of different control rods; Core 1A also has one less layer of pebbles (21 layers instead of 22). Core 2 retains the first 16 layers of pebbles from Cores 1 and 1A and has 16 layers of moderator pebbles stacked above the fueled layers. Core 3 retains the first 17 layers of pebbles but has polyethylene rods inserted between pebbles to simulate water ingress. The additional partial pebble layer (layer 18) for Core 3 was not included as it was used for core operations and not the reported critical configuration. Cores 1, 1A, 2, and 3 were determined to be acceptable benchmark experiments.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

HTR –Proteus Pebble Bed Experimental Program Cores 1, 1A, 2, and 3: Hexagonal Close Packing with a 1:2 Moderator-to-Fuel Pebble Ratio (Rev. 1)

In its deployment as a pebble bed reactor (PBR) critical facility from 1992 to 1996, the PROTEUS facility was designated as HTR-PROTEUS. This experimental program was performed as part of an International Atomic Energy Agency (IAEA) Coordinated Research Project (CRP) on the Validation of Safety Related Physics Calculations for Low Enriched HTGRs. Within this project, critical experiments were conducted for graphite moderated LEU systems to determine core reactivity, flux and power profiles, reaction-rate ratios, the worth of control rods, both in-core and reflector based, the worth of burnable poisons, kinetic parameters, and the effects of moisture ingress on these parameters. Four benchmark experiments were evaluated in this report: Cores 1, 1A, 2, and 3. These core configurations represent the hexagonal close packing (HCP) configurations of the HTR-PROTEUS experiment with a moderator-to-fuel pebble ratio of 1:2. Core 1 represents the only configuration utilizing ZEBRA control rods. Cores 1A, 2, and 3 use withdrawable, hollow, stainless steel control rods. Cores 1 and 1A are similar except for the use of different control rods; Core 1A also has one less layer of pebbles (21 layers instead of 22). Core 2 retains the first 16 layers of pebbles from Cores 1 and 1A and has 16 layers of moderator pebbles stacked above the fueled layers. Core 3 retains the first 17 layers of pebbles but has polyethylene rods inserted between pebbles to simulate water ingress. The additional partial pebble layer (layer 18) for Core 3 was not included as it was used for core operations and not the reported critical configuration. Cores 1, 1A, 2, and 3 were determined to be acceptable benchmark experiments.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Design and evaluation of a dilute flow particle-to-air heat exchanger for energy storage applications

The use of inert and redox-active particles for high-temperature energy storage requires the development of components that can efficiently transfer energy to high-pressure working fluids like supercritical carbon dioxide (sCO 2 ). Dilute flow reactors can enable high working fluid outlet temperatures and minimal parasitic losses compared to moving packed bed and fluidized bed reactors. This research uses both computational and experimental methods to explore the design trade-offs and practical challenges of a novel component for transferring energy from dilute flows of hot, reduced metal oxide (MO x ) particles to sCO 2 in tubes. A discretized thermal resistance network model, which accounts for particle hydrodynamics, multi-mode heat transfer, and reaction equilibrium, guides the design of a prototype device. This device is experimentally tested with a surrogate heat transfer fluids and inert particle temperatures up to 400°C and a heat duty exceeding 1 kW. The data are used to validate the thermal hydraulic sub-models, allowing for the simulation of reacting particle scenarios. Under nominal design conditions, the flow rate of reactive particles is predicted to be 30% lower than that of inert particles for the same energy recovered, with over 70% of the stored particle energy transferred to the sCO 2 . Furthermore, these findings can inform the design of more efficient energy recovery reactors for particle-based systems and can be integrated into system-level concentrated solar power models with thermal storage to optimize operating conditions.

14 SOLAR ENERGY↗

Ordering nanoparticles with polymer brushes

Ordering nanoparticles into a desired super-structure is often crucial for their technological applications. We use molecular dynamics simulations to study the assembly of nanoparticles in a polymer brush randomly grafted to a planar surface as the solvent evaporates. Initially, the nanoparticles are dispersed in a solvent that wets the polymer brush. After the solvent evaporates, the nanoparticles are either inside the brush or adsorbed at the surface of the brush, depending on the strength of the nanoparticle-polymer interaction. For strong nanoparticle-polymer interactions, a 2-dimensional ordered array is only formed when the brush density is finely tuned to accommodate a single layer of nanoparticles. When the brush density is higher or lower than this optimal value, the distribution of nanoparticles shows large fluctuations in space and the packing order diminishes. For weak nanoparticle-polymer interactions, the nanoparticles order into a hexagonal array on top of the polymer brush as long as the grafting density is high enough to yield a dense brush. As a result, an interesting healing effect is observed for a low-grafting-density polymer brush that can become more uniform in the presence of weakly adsorbed nanoparticles.

74 ATOMIC AND MOLECULAR PHYSICS↗

In situ X-ray imaging of heterogeneity in dynamic compaction of granular media

Dynamic compaction of granular materials is a complex process wherein the material response at the continuum scale arises from fracture, comminution, and fragment ow at the grain scale. Granular materials have heterogeneity due to variation in grain properties, as well as variation in local packing density and structure. These heterogeneities may affect the dynamic compaction response, producing a structured and time-varying compaction front. Methodology used to characterize the shock behavior in solid materials may be inappropriate for granular materials, because of this unsteady behavior and interactions between the granular material and measurement surfaces. To observe the compaction front heterogeneity, in-situ x-ray imaging of granular compaction is conducted at a scale between the grain- and continuum scales. To allow for sufficient x-ray transmission, a thin sample geometry is used, for which boundary affects may result in a significantly different load path than would occur in a 1-D compaction configuration. Numerical simulations of the experimental geometry support analysis of the results so that the feature of the compaction front can be distinguished from artifacts of the experimental configuration. The results suggest compaction front heterogeneity may have structure with a length scale of tens of particle diameters, and demonstrate that finite grain size can inhibit the formation shear-induced features that would arise in a homogenized representation of the same material.

36 MATERIALS SCIENCE↗

Unraveling design principles of protein landscapes in photosynthetic membranes in plant chloroplasts

The supramolecular organization of proteins within photosynthetic membranes is crucial for energy conversion in plants. Here, we introduce an analytical and computational pipeline that integrates high-resolution cryo–scanning electron microscopy, biochemical quantification, advanced Monte Carlo computer simulations, and statistical methods to elucidate the elusive protein landscapes of grana membranes in intact Arabidopsis leaves. Our integrated analysis challenges the prevailing view that particles on the exoplasmic fracture faces in freeze-fracture samples represent photosystem II exclusively. Instead, these particles also include cytochrome b 6 f complexes. Furthermore, our steric clash analysis demonstrates that stacked membranes contain a mixture of larger PSII supercomplexes (C 2 S 2 M 2 and C 2 S 2 ) in addition to a smaller complex (C 2 ). This suggests that in vivo PSII supercomplexes exist in an equilibrium distribution of differing sizes. Furthermore, we discovered that, although size exclusion effects govern the global protein arrangement, local packing exhibits orientational order indicative of lateral attractive protein-protein interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of a gravity-independent wastewater bioprocessor for advanced life support in space

Operation of aerobic biological reactors in space is controlled by a number of challenging constraints, mainly stemming from mass transfer limitations and phase separation. Immobilized-cell packed-bed bioreactors, specially designed to function in the absence of gravity, offer a viable solution for the treatment of gray water generated in space stations and spacecrafts. A novel gravity-independent wastewater biological processor, capable of carbon oxidation and nitrification of high-strength aqueous waste streams, is presented. The system, consisting of a fully saturated pressurized packed bed and a membrane oxygenation module attached to an external recirculation loop, operated continuously for over one year. The system attained high carbon oxidation efficiencies often exceeding 90% and ammonia oxidation reaching approximately 60%. The oxygen supply module relies on hydrophobic, nonporous, oxygen selective membranes, in a shell and tube configuration, for transferring oxygen to the packed bed, while keeping the gaseous and liquid phases separated. This reactor configuration and operating mode render the system gravity-independent and suitable for space applications.

NASA Discipline Life Support Systems↗

Physical-Chemical Treatment of Metals and Radionuclides in the Saturated Zone Using Colloidal Buffers - 12515

There are numerous acidic plumes throughout the DOE complex and the nation as a whole. Low aquifer pH is a major concern since many important radionuclides (Pu, Ra, Sr, Tc) and metals (Cd, Co, Cs, Mn, Ni, Pb, Zn) strongly sorb to iron hydroxides and aluminosilicates under neutral to alkaline conditions, but are mobile in acidic plumes. To effectively use natural and enhanced attenuation (NEA) for management of these contaminants, we must be able to raise aquifer pH and maintain it at background levels until the external acid loading to the aquifer has dissipated. Geochemical modeling showed that a permeable reactive barrier (PRB) formed by injection of colloidal Mg(OH){sub 2} would last much longer than colloidal Ca(OH){sub 2} due to the much lower solubility of Mg(OH){sub 2}. Assuming a 1,000 meq/L suspension of colloidal Mg(OH)2 could be effectively distributed, the PRB could last over twenty years before rejuvenation was required. Preliminary bench-scale treatability studies were conducted to demonstrate the efficacy of increasing the aquifer pH using a colloidal pH buffer. Laboratory studies demonstrated that three different colloidal Mg(OH){sub 2} suspensions (concentration varied from 1,000 to 1,250 meq/L) could be transported through the columns packed with aquifer sand without significant permeability loss. The time before suspension breakthrough into the column effluent varied with surface treatment, indicating the Mg(OH)2 retention and PRB longevity could be controlled by varying the suspension surface treatment. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Self-consistent phonon theory of the crystallization and elasticity of attractive hard spheres

We propose an Einstein-solid, self-consistent phonon theory for the crystal phase of hard spheres that interact via short-range attractions. The approach is first tested against the known behavior of hard spheres, and then applied to homogeneous particles that interact via short-range square well attractions and the Baxter adhesive hard sphere model. Given the crystal symmetry, packing fraction, and strength and range of attractive interactions, an effective harmonic potential experienced by a particle confined to its Wigner-Seitz cell and corresponding mean square vibrational amplitude are self-consistently calculated. The crystal free energy is then computed and, using separate information about the fluid phase free energy, phase diagrams constructed, including a first-order solid-solid phase transition and its associated critical point. The simple theory qualitatively captures all the many distinctive features of the phase diagram (critical and triple point, crystal-fluid re-entrancy, low-density coexistence curve) as a function of attraction range, and overall is in good semi-quantitative agreement with simulation. Knowledge of the particle localization length allows the crystal shear modulus to be estimated based on elementary ideas. Excellent predictions are obtained for the hard sphere crystal. Expanded and condensed face-centered cubic crystals are found to have qualitatively different elastic responses to varying attraction strength or temperature. Furthermore, as temperature increases, the expanded entropic solid stiffens, while the energy-controlled, fully-bonded dense solid softens.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Universal Model of Cation Effects in Electrocatalysis

Electrolyte cations are conventionally viewed as inert spectators in electrocatalysis. However, a wealth of observations show that catalytic rates are often highly sensitive to cation identity. Despite their prevalence, these cation effects have resisted a unified mechanistic explanation, with different physical phenomena implicated across reaction chemistries, catalyst compositions, and choice of solvent. In this perspective, we describe a general framework for understanding cation effects in electrocatalysis based on electrostatics. We argue that cations influence reaction rates by modifying the strength of the electric field present at the catalyst surface, which alters the energetics of adsorbed intermediates and transition states according to their dipole moments and polarizabilities. The magnitude of this field depends on how cations arrange at the electrode surface, controlled by their size, shape, solvation, and packing efficiency. Cations that can arrange more densely result in a steeper potential drop at the electrode surface and consequently a stronger electric field. Our model further identifies two criteria for observing cation effects: (1) the operating potential must be negative of the electrode’s potential of zero total charge, ensuring that cations accumulate at the interface, and (2) the energetics of the kinetically relevant elementary step must be field sensitive. This framework reconciles previously inconsistent trends, including why cation effects appear only for some catalysts, why reaction selectivity is sensitive to cation identity, and why activity can increase with cation size on certain metals but decrease on others. Supported by kinetic measurements, spectroscopy, and atomistic simulations, the model provides both conceptual value for building intuition about catalysis at charged interfaces and predictive value for anticipating trends for new reactions, catalysts, and electrolytes. We conclude by highlighting the importance of electric fields across electrochemical, thermochemical, and biological catalysis and propose that considering the electrostatic environment around active sites offers new opportunities for improving activity and selectivity.

cation effects↗

Size dependent behavior of Fe 3 O 4 crystals during electrochemical (de)lithiation: an in situ X-ray diffraction, ex situ X-ray absorption spectroscopy, transmission electron microscopy and theoretical investigation

Here, the iron oxide magnetite, Fe 3 O 4 , is a promising conversion type lithium ion battery anode material due to its high natural abundance, low cost and high theoretical capacity. While the close packing of ions in the inverse spinel structure of Fe 3 O 4 enables high energy density, it also limits the kinetics of lithium ion diffusion in the material. Nanosizing of Fe 3 O 4 to reduce the diffusion path length is an effective strategy for overcoming this issue and results in improved rate capability. However, the impact of nanosizing on the multiple structural transformations that occur during the electrochemical (de)lithiation reaction in Fe 3 O 4 is poorly understood. In this study, the influence of crystallite size on the lithiation-conversion mechanisms in Fe 3 O 4 is investigated using complementary X-ray techniques along with transmission electron microscopy (TEM) and continuum level simulations on electrodes of two different Fe 3 O 4 crystallite sizes. In situ X-ray diffraction (XRD) measurements were utilized to track the changes to the crystalline phases during (de)lithiation. X-ray absorption spectroscopy (XAS) measurements at multiple points during the (de)lithiation processes provided local electronic and atomic structural information. Tracking the crystalline and nanocrystalline phases during the first (de)lithiation provides experimental evidence that (1) the lithiation mechanism is non-uniform and dependent on crystallite size, where increased Li + diffusion length in larger crystals results in conversion to Fe 0 metal while insertion of Li + into spinel-Fe 3 O 4 is still occurring, and (2) the disorder and size of the Fe metal domains formed when either material is fully lithiated impacts the homogeneity of the FeO phase formed during the subsequent delithiation.

25 ENERGY STORAGE↗

Shock compression/release of magnesium single crystals along a low-symmetry orientation: Role of basal slip

To gain insight into the relative contributions of different plastic deformation mechanisms, particularly basal slip, for shocked hexagonal close-packed (hcp) metals, magnesium (Mg) single crystals were subjected to shock compression and release along a low-symmetry (LS) orientation to 1.9 and 4.8 GPa elastic impact stresses. LS-axis is a “non-specific” direction resulting in propagation of quasi-longitudinal and quasi-shear waves. Wave profiles, measured using laser interferometry, show a small elastic wave followed by two plastic waves in compression; release wave profiles exhibited a structured response for the higher stress and a smooth response for the lower stress. The LS-axis wave profiles are significantly different than profiles published previously for c- and a -axes, demonstrating that Mg single crystals exhibit strong anisotropy under shock compression/release. Numerical simulations, using a time-dependent anisotropic modeling framework, show that shock wave loading along the LS-axis involves simultaneous operation of multiple deformation mechanisms. Shock compression along LS-axis is dominated by basal slip while prismatic and pyramidal I {$10\bar{1}1$} $\langle$ $11\bar{2}3$ $\rangle$ slip play a smaller role; coupling between longitudinal and shear deformations was observed. The unloading response is dominated by basal slip with some contribution from prismatic slip; pyramidal I slip is not activated. The present results, unlike results obtained for c - and a -axes, show that the deformation mechanism observed under quasi-static loading conditions along LS-axis is not sufficient to determine shock response along this orientation. Finally, although requiring numerical simulations for wave analysis, shock propagation along a LS orientation provides new insights into the plastic deformation response of hcp metal single crystals.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Examination of Hydrate Formation Methods: Trying to Create Representative Samples

Forming representative gas hydrate-bearing laboratory samples is important so that the properties of these materials may be measured, while controlling the composition and other variables. Natural samples are rare, and have often experienced pressure and temperature changes that may affect the property to be measured. Forming methane hydrate samples in the laboratory has been done a number of ways, each having advantages and disadvantages. The ice-to-hydrate method, contacts melting ice with methane at the appropriate pressure to form hydrate. The hydrate can then be crushed and mixed with mineral grains under controlled conditions, and then compacted to create laboratory samples of methane hydrate in a mineral medium. The hydrate in these samples will be part of the load-bearing frame of the medium. In the excess gas method, water is distributed throughout a mineral medium (e.g. packed moist sand, drained sand, moistened silica gel, other porous media) and the mixture is brought to hydrate-stable conditions (chilled and pressurized with gas), allowing hydrate to form. This method typically produces grain-cementing hydrate from pendular water in sand. In the dissolved gas method, water with sufficient dissolved guest molecules is brought to hydrate-stable conditions where hydrate forms. In the laboratory, this is can be done by pre-dissolving the gas of interest in water and then introducing it to the sample under the appropriate conditions. With this method, it is easier to form hydrate from more soluble gases such as carbon dioxide. It is thought that this method more closely simulates the way most natural gas hydrate has formed. Laboratory implementation, however, is difficult, and sample formation is prohibitively time consuming. In another version of this technique, a specified quantity of gas is placed in a sample, then the sample is flooded with water and cooled. We have performed a number of tests in which hydrate was formed and the uniformity of the hydrate formation was examined. These tests have primarily used a variety of modifications of the excess gas method to make the hydrate, although we have also used a version of the excess water technique. Early on, we found difficulties in creating uniform samples with a particular sand/ initial water saturation combination (F-110 Sand, ~ 35% initial water saturation). In many of our tests we selected this combination intentionally to determine whether we could use a method to make the samples uniform. The following methods were examined: • Excess gas, • Freeze/thaw/form, • Freeze/pressurize/thaw, • Excess gas followed by water saturation, • Excess water, • Sand and kaolinite, • Use of a nucleation enhancer (SnoMax), and • Use of salt in the water. Below, each method, the underlying hypothesis, and our results are briefly presented, followed by a brief conclusion. Many of the hypotheses investigated are not our own, but were presented to us. Much of the data presented is from x-ray CT scanning our samples. The x-ray CT scanner provides a three-dimensional density map of our samples. From this map and the physics that is occurring in our samples, we are able to gain an understanding of the spatial nature of the processes that occur, and attribute them to the locations where they occur.

03 NATURAL GAS↗

Fabrication of Pop-up Detector Arrays on Si Wafers

High sensitivity is a basic requirement for a new generation of thermal detectors. To meet the requirement, close-packed, two-dimensional silicon detector arrays have been developed in NASA Goddard Space Flight Center. The goal of the task is to fabricate detector arrays configured with thermal detectors such as infrared bolometers and x-ray calorimeters to use in space fliGht missions. This paper focuses on the fabrication and the mechanical testing of detector arrays in a 0.2 mm pixel size, the smallest pop-up detectors being developed so far. These array structures, nicknamed "PUDS" for "Pop-Up Detectors", are fabricated on I pm thick, single-crystal, silicon membranes. Their designs have been refined so we can utilize the flexibility of thin silicon films by actually folding the silicon membranes to 90 degrees in order to obtain close-packed two-dimensional arrays. The PUD elements consist of a detector platform and two legs for mechanical support while also serving as electrical and thermal paths. Torsion bars and cantilevers connecting the detector platform to the legs provide additional flexures for strain relief. Using micro-electromechanical structure (MEMS) fabrication techniques, including photolithography, anisotropic chemical etching, reactive-ion etching, and laser dicing, we have fabricated PLTD detector arrays of fourteen designs with a variation of four parameters including cantilever length, torsion bar length and width, and leg length. Folding tests were conducted to test mechanical stress distribution for the array structures. We obtained folding yields and selected optimum design parameters to reach minimal stress levels. Computer simulation was also employed to verify mechanical behaviors of PUDs in the folding process. In addition, scanning electron microscopy was utilized to examine the flatness of detectors and the alignment of detector pixels in arrays. The fabrication of thermistors and heaters on the pop-up detectors is under way, preparing us for the next step of the experiment, the thermal test.

Li, Mary J.↗

Grain dynamics in zero gravity

The dynamics of granular materials has proved difficult to model, primarily because of the complications arising from inelastic losses, friction, packing, and the effect of many grains being in contact simultaneously. The kinetic model of granular systems is similar to the kinetic theory of gases, except that collisional energy losses are always present in the former and must be treated explicity. Few granular materials on Earth are describable by this limiting model, since gravity tends to collapse the grains into a high density state where Coulombic friction effects are dominant. The planned Space Station offers an unusual opportunity to test the kinetic grain model and to explore its predictions. Without gravity, the regime of low interparticle velocities (where an elastic description of the collision is still valid) can be investigated. This will allow for direct interpretation by dynamical computer simulations as well as by the kinetic theory. The dynamics of spherical grains inside a clear box would be examined. Results would be compared with the predictions of the kinetic theory and computer simulations.

Werner, B. T.↗