Search NASA⌕ Search

SEARCH · Search NASA

Results for “phase space methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Modeling Investigation on a Deflecting-Accelerating Composite RF-cavity System for Phase Space Beam Control

Phase space manipulations between the longitudinal and transverse degrees of freedom hold great promise toward the precise control of electron beams. Transverse-to-longitudinal phase space exchange has been shown to be capable of exchanging the transverse and horizontal emittance or controlling the charge distribution of an electron bunch for beam-driven advanced accelerator methods. The main limitation on the performance of this exchange mechanism stems from the external coupling nature of a realistic deflecting cavity, compared to a thin-lens model. As an extended idea from [A. Zholents, PAC11], this paper presents the design of a composite 3.9-GHz RF system consisting of a deflecting and accelerating-mode cavity. The system design analysis is discussed with particle-in-cell (PIC) simulations of the device performance.

43 PARTICLE ACCELERATORS↗

Synthesis, Structural Characterization and Chemical Bonding of Sr 7 Li 6 Sn 12 and its Quaternary Derivatives with Eu and Alkaline Earth Metal (Mg, Ca, Ba) Substitutions. A Tale of Seven Li‐Containing Stannides and Two Complex Crystal Structures

In this paper, we discuss the synthesis and the structural characterization of the new ternary compound Sr 7 Li 6 Sn 12 and its six quaternary derivatives, where alkaline earth metals (Ca, Mg, Ba) and the rare earth metal Eu are substituted, yielding crystalline phases of monoclinic or orthorhombic symmetry. The title compounds were synthesized via high‐temperature solid‐state reactions of the corresponding elements. The crystal structures were determined by single‐crystal X‐ray diffraction methods. The (Sr,Ca) 7 Li 6 Sn 12 and Eu 7 (Mg,Li) 6 Sn 12 phases represent a new structure type (space group P 2/ m , No. 10) while Sr 7 Li 6 Sn 12 and the rest of the title phases crystallize in the orthorhombic base‐centered space group Cmmm (No. 65) which is similar to the Eu 7 Li 8– x Sn 10+ x ( x ≈ 2.0) phase with the Ce 7 Li 8 Ge 10 structure type (Pearson code oC 50). Careful examination of the resulting structures shows intricate disordering between Li and Sn atoms, which is governed by the total number of valence electrons. The discussion of experimental results is also supported by DFT electronic structure calculations.

Osman, Hussien H.↗

A search for microscopic black holes, string balls, and sphalerons in proton-proton collisions at $\sqrt{s}=13$ TeV

A search for microscopic black holes, string balls, and electroweak sphalerons using proton-proton collisions at $\sqrt{s}=13$ TeV recorded with the CMS detector at the CERN LHC during the 2016–2018 data taking, and corresponding to an integrated luminosity of 138 fb −1 , is presented. Two search strategies based on control samples in data are used. Model-independent limits on the cross section of physics phenomena with multiple energetic jets, leptons, and photons are set using a method that relies on the shape invariance of the scalar sum of the transverse momenta of all objects in the event. Model-dependent limits on black hole and sphaleron production are set using a newly introduced method that has been developed for the identification of collider events with distinct kinematic features by separating them into classes based on phase space proximity. In the context of models with large extra dimensions, semiclassical black holes and string balls with masses below 8.4–11.4 TeV and 9.0–10.7 TeV, respectively, are excluded at 95% confidence level, significantly extending the reach beyond previous searches. Results of a dedicated search for electroweak sphalerons are used to derive an upper limit of 0.0034 at 95% confidence level on the fraction of quark-quark interactions, with a center-of-mass energy above the nominal sphaleron transition energy threshold of 9 TeV, that result in a sphaleron transition.

Beyond Standard Model↗

Implicitly solving phase appearance and disappearance problems using two-fluid six-equation model

Phase appearance and disappearance issue presents serious numerical challenges in two-phase flow simulations using the two-fluid six-equation model. Numerical challenges arise from the singular equation system when one phase is absent, as well as from the discontinuity in the solution space when one phase appears or disappears. In this work, a high-resolution spatial discretization scheme on staggered grids and fully implicit methods were applied for the simulation of two-phase flow problems using the two-fluid six-equation model. A Jacobian-free Newton-Krylov (JFNK) method was used to solve the discretized nonlinear problem. An improved numerical treatment was proposed and proved to be effective to handle the numerical challenges. The treatment scheme is conceptually simple, easy to implement, and does not require explicit truncations on solutions, which is essential to conserve mass and energy. Various types of phase appearance and disappearance problems relevant to thermal-hydraulics analysis have been investigated, including a sedimentation problem, an oscillating manometer problem, a non-condensable gas injection problem, a single-phase flow with heat addition problem and a subcooled flow boiling problem. Successful simulations of these problems demonstrate the capability and robustness of the proposed numerical methods and numerical treatments. As a result, volume fraction of the absent phase can be calculated effectively as zero.

42 ENGINEERING↗

Resolving microstructures in Z pinches with intensity interferometry

Nearly 60 years ago, Hanbury Brown and Twiss [R. Hanbury Brown and R. Q. Twiss, Nature 178, 1046 (1956)] succeeded in measuring the 30 nrad angular diameter of Sirius using a new type of interferometry that exploited the interference of photons independently emitted from different regions of the stellar disk. Its basis was the measurement of intensity correlations as a function of detector spacing, with no beam splitting or preservation of phase information needed. Applied to Z pinches, X pinches, or laser-produced plasmas, this method could potentially provide spatial resolution under one micron. A quantitative analysis based on the work of Purcell [E. M. Purcell, Nature 178, 1449 (1956)] reveals that obtaining adequate statistics from x-ray interferometry of a Z-pinch microstructure would require using the highest-current generators available. However, using visible light interferometry would reduce the needed photon count and could enable its use on sub-MA machines.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Cosmological perturbation theory for large scale structure in phase space

We develop a framework for Large Scale Structure (LSS) perturbation theory, that solves the Vlasov-Poisson system of equations for the distribution function in full phase space. This approach relaxes the usual apriori assumption of negligible velocity dispersion underlying the Standard Perturbation Theory (SPT). We apply the new method to rederive the usual SPT kernels up to third order in the perturbative expansion. We also show that a counterterm, identical to the one introduced by standard Effective Field Theory (EFT) methods, naturally arises within our framework. We finish by making a precise connection to EFT techniques, which reveals the necessity of the EFTofLSS to self-consistently model the long-wavelength fluid, and illustrates the importance of having theoretical control over short distance fluctuations.

Cosmological perturbation theory in GR and beyond↗

Strong-disorder renormalization group for periodically driven systems

Quenched randomness can lead to robust nonequilibrium phases of matter in periodically driven (Floquet) systems. Analyzing transitions between such dynamical phases requires a method capable of treating the twin complexities of disorder and discrete time-translation symmetry. We introduce a real-space renormalization group approach, asymptotically exact in the strong-disorder limit, and exemplify its use on the periodically driven interacting quantum Ising model. As a result, we analyze the universal physics near the critical lines and multicritical point of this model, and demonstrate the robustness of our results to the inclusion of weak interactions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

WE-AB-207A-11: Respiratory Motion Guided 4DCBCT - A Step Towards Controlling 4DCBCT Image Quality

Purpose: We have developed a method, called respiratory motion guided 4DCBCT (RMG-4DCBCT), in which the gantry speed and projection frequency are varied in response to the patient’s real-time respiratory signal to eliminate streaking artifacts and to suppress duplicate projections in 4DCBCT images. In 2015, we realized RMG-4DCBCT on an Elekta Synergy linear accelerator with a mechanical relay to suppress projections and a potentiometer to adjust the gantry speed in response to the patient’s real-time respiratory signal. The aim of this study was to analyse the image quality to determine what can and cannot be controlled. Methods: Using RMG-4DCBCT, we acquired 40 (RMG-4DCBCT-40) and 60 (RMG-4DCBCT-60) equally spaced projections per respiratory phase of the CIRS dynamic thorax phantom with breathing periods from 2s to 8s and two breathing traces from lung cancer patients. The contrast to noise ratio (CNR) and edge response width (ERW) were used to compare image quality between RMG-4DCBCT and conventional 4DCBCT. Results: Regardless of the breathing period, for RMG-4DCBCT, the CNR is approximately 7 and 9 with RMG-4DCBCT-40 and RMG-4DCBCT-60 respectively. Conventional 4DCBCT has a CNR dropping from 20 down to 6 as the breathing period drops from 2s to 8s. With RMG-4DCBCT, the ERW, in the direction of phantom motion, ranges from 2.1mm to 2.5mm as the breathing period drops from 2s to 8s which compares to a higher range of 2.0mm to 2.5mm with conventional 4DCBCT. Images with similar quality to conventional 4DCBCT can be acquired with RMG-4DCBCT-40 which has a 70% reduction in imaging dose. Conclusion: The image contrast can be controlled with RMG-4DCBCT regardless of the patients breathing rate. However, although the image sharpness is better with RMG-4DCBCT, image sharpness has a small dependence on the breathing period; the accuracy of registration and segmentation will therefore vary with the patient’s breathing period. This project was supported by a National Health and Medical Research Council (NHMRC) project grant 1034060 and Cancer Australia grant number 1084566.

60 APPLIED LIFE SCIENCES↗

LIVA: A Data Reduction Program for Line-imaging ORVIS Measurements

LIVA (Line-Imaging Velocimetry Analysis) is a program for reducing data of a line-imaging optically recording velocity interferometer system (ORVIS) diagnostic. LIVA uses the Fourier transform method to extract phase information from recorded streak camera images. The extracted phase shift is used to infer target velocity as a function of space and time. The program can be run in any current version of MATLAB (2008a or later) or as a Windows XP executable.

Ao, Tommy↗

Final summarizing report on Grant DE-SC0001014 "Separation of Highly Complex Mixtures by Two-dimension Liquid Chromatography"

The goal of our research was a fundamental investigation of methods available for the coupling of two separate chromatographic separations that would considerably enhance the individual separation power of each of these two separations. This gain arises from the combination of two independent retention mechanisms, one of them separating the components that coelute on the other column, making possible the separation of many more compounds in a given time. The two separation mechanisms used must be very different. This is possible because many retention mechanisms are available, using different kinds of molecular interactions, hydrophobic or hydrophilic interactions, polar interactions, hydrogen bonding, complex formation, ionic interactions, steric exclusion. Two methods can be used, allowing separations to be performed in space (spreading the bands of sample components on a plate covered with stationary phase layer) or in time (eluting the sample components through a column and detecting the bands leaving the column). Both offer a wide variety of possible combinations and were studied.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An introduction to the theory and use of SESAME equations of state

This paper details aspects of the three-component, Helmholtz free energy, equation of state (EOS) model that serves as the construction basis for the majority of the tabular equations of state residing in the SESAME database. The three components account for contributions to the total free energy from the cold curve (or zero Kelvin isotherm), the nuclear vibrational excitations, and the thermal electronic excitations. Decomposition of the model into these three components is a consequence of the underlying theoretical framework describing materials in the condensed matter phase since each of the free energy components directly correspond to a term in the condensed matter system Hamiltonian. In addition to providing an introduction to the theoretical basis of the three-component model and an account of the empirical data utilized to construct an EOS, the aim of this paper is to enable readers to evaluate the applicability of a particular EOS within the context of a problem they are solving by reviewing the thermodynamic phase space in which it has been appropriately constrained. This paper does not aim to serve as an exhaustive documentation of the various methods used in construction of the SESAME tables. Instead, it focuses on the models used during the construction of a particular EOS for aluminum performed by Sjostrom et al. [SCR16] as an illustrative example.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

External tank laminar and rarefied aeroheating

A practical method has been developed for calculation of laminar and rarefied aerodynamic heating to the external tank of the Space Shuttle during the ascent phase of flight. A modification of laminar boundary theory is used as the basis for the heating relation. This relation is used in conjunction with a correlation for surface pressures to obtain undisturbed aerodynamic heating. Interference effects on the external tank due to the orbiter are correlated using the rarefaction parameter which was developed as part of the heating relation. The effects of rarefaction on the undisturbed and interference heating are illustrated with test data.

Engel, C. D.↗

Analysis of an infinite array of rectangular microstrip patches with idealized probe feeds

A solution is presented to the problem of an infinite array of microstrip patches fed by idealized current probes. The input reflection coefficient is calculated versus scan angle in an arbitrary scan plane, and the effects of substrate parameters and grid spacing are considered. It is pointed out that even when a Galerkin method is used the impedance matrix is not symmetric due to phasing through a unit cell, as required for scanning. The mechanism by which scan blindness can occur is discussed. Measurement results are presented for the reflection coefficient magnitude variation with angle for E-plane, H-plane, and D-plane scans, for various substrate parameters. Measured results from waveguide simulators are also presented, and the scan blindness phenomenon is observed and discussed in terms of forced surface waves and a modified grating lobe diagram.

Pozar, D. M.↗

Rebuilding the space technology base

NASA's Civil Space Technology Initiative (CSTI) will not only develop novel technologies for space exploration and exploitation, but also take mature technologies into their demonstration phase in earth orbit. In the course of five years, CSTI will pay off in ground- and space-tested hardware, software, processes, methods for low-orbit transport and operation, and fundamental scientific research on the orbital environment. Attention is given to LOX/hydrogen and LOX/hydrocarbon reusable engines, liquid/solid fuel hybrid boosters, and aeroassist flight experiments for the validation of aerobraking with atmospheric friction. Also discussed are advanced scientific sensors, systems autonomy and telerobotics, control of flexible structures, precise segmented reflectors, high-rate high-capacity data handling, and advanced nuclear power systems.

Povinelli, Frederick P.↗

Jet mixing in low gravity - Results of the Tank Pressure Control Experiment

The Tank Pressure Control Experiment (TPCE) is discussed with attention given to the results for controlling storage-tank pressures by forced-convective mixing in microgravitational environments. The fluid dynamics of cryogenic fluids in space is simulated with freon-113 during axial-jet-induced mixing. The experimental flow-pattern data are found to confirm previous data as well as existing mixing correlations. Thermal nonuniformities and tank pressure can be reduced by employing low-energy mixing jets which are useful for enhancing heat/mass transfer between phases. It is found that space cryogenic systems based on the principle of active mixing can be more reliable and predictable than other methods, and continuous or periodic mixing can be accomplished with only minor energy addition to the fluid.

Bentz, M. D.↗

Aerodynamic Properties Analysis of Rapid Prototyped Models Versus Conventional Machined Models

Initial studies of the aerodynamic characteristics of proposed launch vehicles can be made more accurately if lower cost, high fidelity aerodynamic models are available for wind tunnel testing early in the design phase. This paper discusses the results of a study undertaken at NASA's Marshall Space Flight Center to determine if four rapid prototyping methods using a variety of materials are suitable for the design and manufacturing of high speed wind tunnel models in direct testing applications. It also gives an analysis of whether these materials and processes are of sufficient strength and fidelity to withstand the testing environment. In addition to test data, costs and turn-around times for the various models are given. Based on the results of this study, it can be concluded that rapid prototyping models show promise in limited direct application for preliminary aerodynamic development studies at subsonic, transonic, and supersonic speeds.

Springer, A.↗

Electromagnetic Modeling for the Conformal Lightweight Antenna System for Aeronautical Communications Technologies (CLAS-ACT) Program: Final Report

A series of electromagnetic simulations was conducted for the Conformal Lightweight Antenna System for Aeronautical Communications Technologies (CLAS-ACT) Program. The program designed, built, and flight tested a 14.25 GHz conformal patch array antenna for satellite communications on a T-34C airplane. Various studies were performed to evaluate the effects of antenna element spacing, array shape, signal taper, phased array pointing angle, null steering coefficients, antenna platform, and location on the airplane. This report documents the methods and some of the results of tests done over a 2 ½ year period.

Mackenzie, Anne I.↗