Search NASA⌕ Search

SEARCH · Search NASA

Results for “powder diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Crystal structure and magnetic properties of the Cr-doped spiral antiferromagnet BiMnFe{sub 2}O{sub 6}

Graphical abstract: - Highlights: • The substitution of Cr for Mn in BiMnFe{sub 2}O{sub 6} is possible by the solution–gel method. • The BiCr{sub x}Mn{sub 1−x}Fe{sub 2}O{sub 6} solid solution is obtained for the x values up to 0.3. • Increasing Cr content lowers the temperature of the antiferromagnetic ordering. - Abstract: We report the Cr{sup 3+} for Mn{sup 3+} substitution in the BiMnFe{sub 2}O{sub 6} structure. The BiCr{sub x}Mn{sub 1−x}Fe{sub 2}O{sub 6} solid solution is obtained by the solution–gel synthesis technique for the x values up to 0.3. The crystal structure investigation using a combination of X-ray powder diffraction and transmission electron microscopy demonstrates that the compounds retain the parent BiMnFe{sub 2}O{sub 6} structure (for x = 0.3, a = 5.02010(6)Å, b = 7.06594(7)Å, c = 12.6174(1)Å, S.G. Pbcm, R{sub I} = 0.036, R{sub P} = 0.011) with only a slight decrease in the cell parameters associated with the Cr{sup 3+} for Mn{sup 3+} substitution. Magnetic susceptibility measurements suggest strong similarities in the magnetic behavior of BiCr{sub x}Mn{sub 1−x}Fe{sub 2}O{sub 6} (x = 0.2; 0.3) and parent BiMnFe{sub 2}O{sub 6}. Only T{sub N} slightly decreases upon Cr doping that indicates a very subtle influence of Cr{sup 3+} cations on the magnetic properties at the available substitution rates.

36 MATERIALS SCIENCE↗

Photocatalytic performances and activities of Ag-doped CuFe{sub 2}O{sub 4} nanoparticles

Graphical abstract: - Highlights: • CuFe{sub 2}O{sub 4} nanocrystals were synthesized by a co-precipitation method. • Ag/CuFe{sub 2}O{sub 4} catalyst was prepared by the wetness impregnation strategy. • The structural properties of Ag/CuFe{sub 2}O{sub 4} were investigated by XRD, TEM, DRS, and XPS techniques. • Ag/CuFe{sub 2}O{sub 4} has higher photocatalytic activity. - Abstract: In this work, CuFe{sub 2}O{sub 4} nanoparticles were synthesized by a chemical co-precipitation route. The Ag/CuFe{sub 2}O{sub 4} catalyst was prepared based on the CuFe{sub 2}O{sub 4} nanoparticles by the incipient wetness impregnation strategy, which showed excellent photoelectric property and catalytic activity. The structural properties of these samples were systematically investigated by X-ray powder diffraction (XRD), transmission electronic microscopy (TEM), UV–vis diffuse reflectance spectroscopy (DRS), X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FT-IR) techniques. The photo-induced charge separation in the samples was demonstrated by surface photovoltage (SPV) measurement. The photocatalytic degradation of 4-CP by the Ag/CuFe{sub 2}O{sub 4} and CuFe{sub 2}O{sub 4} samples were comparatively studied under xenon lamp irradiation. The results indicate that the Ag/CuFe{sub 2}O{sub 4} sample exhibited the higher efficiency for the degradation of 4-CP.

36 MATERIALS SCIENCE↗

Morphology-controlled synthesis of Ag{sub 3}PO{sub 4} nano/microcrystals and their antibacterial properties

Graphical abstract: The Ag{sub 3}PO{sub 4} with rhombic dodecahedral, spherical and small size particles were controllable fabricated just by changing the types of the solvent. The materials possess good antibacterial properties toward different kinds of bacteria. - Highlights: • The Ag{sub 3}PO{sub 4} with three morphologies were controllable fabricated. • The Ag{sub 3}PO{sub 4} as-prepared possess obvious antibacterial properties in the dark. • The antibacterial ability of Ag{sub 3}PO{sub 4} could be greatly improved under the visible light irradiation. - Abstract: We reported the controllable fabrication of Ag{sub 3}PO{sub 4} nano/microcrystals through a simple solution-based precipitation reaction. The samples were characterized by X-ray powder diffraction, scanning electron microscopy, transmission electron microscopy and infrared spectroscopy. The results indicated that the Ag{sub 3}PO{sub 4} crystals with three different morphology, including the rhombic dodecahedron of 500 nm, the sphere of 100 nm and the particles with small-size of 20 nm, could be obtained in the solvents of water, ethylene glycol (EG) and dimethyl sulfoxide (DMSO). The antibacterial assay showed that all samples possess obvious antibacterial properties. In addition, the Ag{sub 3}PO{sub 4} with small size of 20 nm showed better activity due to their high specific surface areas. Notably, we have found that the antibacterial ability of Ag{sub 3}PO{sub 4} could be greatly improved under the visible light irradiation, which are superior to that in the dark and commercial streptomycin.

36 MATERIALS SCIENCE↗

Characterization and visible light photocatalytic mechanism of size-controlled BiFeO{sub 3} nanoparticles

Graphical abstract: BiFeO{sub 3} nanoparticles showed the size-dependent photocatalytic properties, and the corresponding photocatalytic mechanism for the pollutant degradation was proposed. - Highlights: • Size-controlled BiFeO{sub 3} nanoparticles were prepared by sol–gel method. • The hydroxyl radicals were the main reactive species responsible for the pollutant degradation. • BiFeO{sub 3} nanoparticles showed the size-dependent photocatalytic properties. - Abstract: BiFeO{sub 3} nanoparticles with controlled particle size were synthesized via sol–gel method. The samples were characterized by X-ray powder diffraction, transmission electron microscope, Raman spectra, nitrogen adsorption technique and UV–vis diffuse reflectance spectra. Photocatalytic activity of BiFeO{sub 3} nanoparticles was further examined by monitoring the degradation of Rhodamine B dye in an aqueous solution under visible light irradiation. Through the calculation of band position and a number of diagnostic experiments, the photocatalytic mechanism of BiFeO{sub 3} nanoparticles was proposed in this study. It was found that the hydroxyl radicals originated from the photogenerated electrons were the main reactive species responsible for the pollutant degradation. Moreover, with the variations of annealing temperature and time, the average crystallite size, specific surface area and crystallinity of BiFeO{sub 3} nanoparticles could be changed, which thus affected the photocatalytic activity of the corresponding samples.

36 MATERIALS SCIENCE↗

Facile synthesis of Cu/Cu{sub x}O nanoarchitectures with adjustable phase composition for effective NO{sub x} gas sensor at room temperature

Graphical abstract: The Cu/Cu{sub x}O nanoarchitectures with 30–70 nm hollow nanospheres reduced by 3 mmol NaBH{sub 4} exhibits excellent gas-sensing property to low-concentration NO{sub x} gas at room temperature. - Highlights: • The Cu/Cu{sub x}O nanoarchitectures with hollow nanospheres are successfully synthesized. • The method is used for preparing the with Cu/Cu{sub x}O adjustable phase composition. • The C3 sample exhibites excellent gas-sensing propertie to NO{sub x} at room temperation. • The Cu/Cu{sub x}O nanoarchitectures have significant for application of gas sensor. - Abstract: The Cu/Cu{sub x}O nanoarchitectures with 30–70 nm hollow nanospheres are successfully synthesized by a facile wet chemical method. The synthesized products have been studied by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and thermo gravimetric-differential scanning calorimetry (TG-DSC) analysis. The Cu/Cu{sub x}O sensors based on the nanoarchitectures are used to detect the NO{sub x} at room temperature. The results demonstrate that the obtained Cu/Cu{sub x}O nanoarchitectures reduced by 3 mmol NaBH{sub 4} exhibits excellent gas-sensing properties: low detection limit of 0.97 ppm, relatively high sensitivity, short response time, broad linear range and high selectivity. The reasons for gas-sensing activity enhancement on Cu/Cu{sub x}O nanoarchitectures are discussed. The Cu/Cu{sub x}O nanocrystalline with the hierarchical pores structure and tunable compositions have significant for application of gas sensor.

36 MATERIALS SCIENCE↗

Structure and magnetic properties of a new anion-deficient perovskite Pb{sub 2}Ba{sub 2}BiFe{sub 4}ScO{sub 13} with crystallographic shear structure

Graphical abstract: - Highlights: • Pb{sub 2}Ba{sub 2}BiFe{sub 4}ScO{sub 13} was obtained by solid state synthesis. • Its structure was refined from combination of XPD and TEM. • It is a new member of the perovskite-related homologous series A{sub n}B{sub n}O{sub 3n−2} with n = 5. • Pb{sub 2}Ba{sub 2}BiFe{sub 4}ScO{sub 13} is antiferromagnetically ordered below T{sub N} ≈350 K. - Abstract: Pb{sub 2}Ba{sub 2}BiFe{sub 4}ScO{sub 13}, a new n = 5 member of the oxygen-deficient perovskite-based A{sub n}B{sub n}O{sub 3n−2} homologous series, was synthesized using a solid-state method. The crystal structure of Pb{sub 2}Ba{sub 2}BiFe{sub 4}ScO{sub 13} was investigated by a combination of synchrotron X-ray powder diffraction, electron diffraction, high-angle annular dark-field scanning transmission electron microscopy and Mössbauer spectroscopy. At 900 K, it crystallizes in the Ammm space group with the unit cell parameters a = 5.8459(1) Å, b = 4.0426(1) Å, and c = 27.3435(1) Å. In the Pb{sub 2}Ba{sub 2}BiFe{sub 4}ScO{sub 13} structure, quasi-two-dimensional perovskite blocks are periodically interleaved with ½[1 1 0] (1{sup ¯}01){sub p} crystallographic shear (CS) planes. At the CS planes, the corner-sharing FeO{sub 6} octahedra are transformed into chains of edge-sharing FeO{sub 5} distorted tetragonal pyramids. B-positions of the perovskite blocks between the CS planes are jointly occupied by Fe{sup 3+} and Sc{sup 3+}. The chains of the FeO{sub 5} pyramids and (Fe,Sc)O{sub 6} octahedra delimit six-sided tunnels that are occupied by double columns of cations with a lone electron pair (Pb{sup 2+}). The remaining A-cations (Bi{sup 3+}, Ba{sup 2+}) occupy positions in the perovskite block. According to the magnetic susceptibility measurements, Pb{sub 2}Ba{sub 2}BiFe{sub 4}ScO{sub 13} is antiferromagnetically ordered below T{sub N} ≈350 K.

36 MATERIALS SCIENCE↗

Synthesis of TiO{sub 2} core/RuO{sub 2} shell particles using multistep ultrasonic spray pyrolysis

Graphical abstract: - Highlights: • TiO{sub 2} core/RuO{sub 2} shell submicron-particles were prepared via a sequential spray pyrolysis. • Spherical particles have the mean particle diameters between 200 and 400 nm. • This method is promising for synthesis of core–shell and core–multishell materials. - Abstract: Spherical submicron-particles with TiO{sub 2} core–RuO{sub 2} shell structure have been synthesized by employing sequential ultrasonic spray pyrolysis. The particles have been investigated by X-ray powder diffraction, scanning electron microscopy and different transmission electron microscopy techniques. The quality of the core–shell structure of the particles has been confirmed by comparison of the experimental data with those generated on the basis of a hard sphere core–shell model. It has been found that the mixing of the Ru-containing aerosol with the TiO{sub 2} particle stream has a significant impact on the core–shell formation. The method introduced in this study can probably be applied for preparation of core–shell and core–multishell materials that are difficult to synthesize in a single step spray pyrolysis process.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis, characterization and luminescent properties of GdPO{sub 4}·H{sub 2}O:Tb{sup 3+} nanorods and nanobundles

Graphical abstract: - Highlights: • The GdPO{sub 4}·H{sub 2}O:Tb{sup 3+} nanocrystals have been synthesized via a hydrothermal method. • The formation mechanisms of the nanorods and nanobundles were put forward. • The luminescent intensities are associated with the morphologies and sizes. - Abstract: In this paper, the Tb{sup 3+}-doped GdPO{sub 4}·H{sub 2}O nanorods and nanobundles have been synthesized by the hydrothermal method with and without glycine, respectively. The X-ray powder diffraction (XRD), thermogravimetric and differential thermal analysis (TG–DTA), Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), energy-dispersive spectra (EDS) and photoluminescence (PL) were employed to characterize the as-obtained products. It was found that the addition of glycine and the pH value have crucial influences on the formation of the resulting morphologies and sizes. The possible formation mechanisms for GdPO{sub 4}·H{sub 2}O:Tb{sup 3+} nanorods and nanobundles were put forward. A detailed investigation on the photoluminescence of GdPO{sub 4}·H{sub 2}O:Tb{sup 3+} different samples revealed that the luminescent properties of products are strongly correlated with the morphologies, sizes, coordination environment and crystal field symmetry.

36 MATERIALS SCIENCE↗

Novel yellowish-green emitting luminescence in Ca{sub 7}Si{sub 2}P{sub 2}O{sub 16}:Eu{sup 2+} phosphor

Graphical abstract: The phosphor has two separated emission centers with the dependent emission intensity on Eu{sup 2+} doping. There is a red-shift in the emission due to energy transfer with increasing the Eu{sup 2+}-doping. - Highlights: • Green-origin-emitting phosphors of Eu{sup 2+}-doped Ca{sub 7}Si{sub 2}P{sub 2}O{sub 16} were firstly prepared by chemical sol–gel method. • The tunable luminescence color was realized by the changing Eu{sup 2+}-doping in Ca{sub 7}Si{sub 2}P{sub 2}O{sub 16}. • Ca{sub 7}Si{sub 2}P{sub 2}O{sub 16}:Eu{sup 2+} displays two typical luminescence centers with the emission depending on Eu{sup 2+} doping. • Eu{sup 2+}-doped Ca{sub 7}Si{sub 2}P{sub 2}O{sub 16} phosphor has an excellent thermal stability on the temperature quenching. - Abstract: Color tunable green-origin-emitting phosphor of Eu{sup 2+}-doped phosphate-silicate Ca{sub 7}Si{sub 2}P{sub 2}O{sub 16} was prepared by chemical sol–gel method. The X-ray powder diffraction, the photoluminescence excitation and emission spectra, time resolved spectra, and thermal stability were measured. The excitation spectra can well match with the emission light of near UV-LED chips (360–400 nm). The tunable luminescence was realized by changing Eu{sup 2+}-doping concentration. Ca{sub 7}Si{sub 2}P{sub 2}O{sub 16}:Eu{sup 2+} displays two typical luminescence centers, which were suggested to originate from two Ca{sup 2+} sites in the host. With increasing Eu{sup 2+} doping concentrations, the green emission band shifts to long wavelength. Energy transfer between the two different Eu{sup 2+} ions is discussed by analyzing the photoluminescence excitation and emission spectra, concentration-dependent luminescence intensity, and lifetimes. The dependence of the luminescence intensity of Ca{sub 7}Si{sub 2}P{sub 2}O{sub 16}:Eu{sup 2+} on temperatures was measured. The activation energy (ΔE) for thermal quenching was reported.

36 MATERIALS SCIENCE↗

Microstructure characterization and electrical transport of nanocrystalline ZrO{sub 2}–CeO{sub 2} solid solution

Graphical abstract: - Highlights: • Monoclinic ZrO{sub 2} phase has been changed to cubic ZrO{sub 2} phase within a short milling. • Conductivity increases due to change of phase from monoclinic to cubic. • A maximum has been observed in the s–T curve. • A transformation from −ve to +ve ac magnetoconductance has been observed. - Abstract: Nanocrystalline ZrO{sub 2}–CeO{sub 2} (ZC) solid solution is synthesized by high energy ball-milling the powder mixture of monoclinic (m) ZrO{sub 2}–10 mol% CeO{sub 2} in air medium. X-ray powder diffraction (XRD) patterns show that the method IS effective to synthesize cubic (c) ZrO{sub 2} phase within a short milling time. Formation mechanism, structural and microstructural changes of different phases and relative phase abundances have been estimated by Rietveld analysis of XRD patterns. The dc conductivity has been enhanced due to monoclinic to cubic phase transformation. A transformation from small polaron hopping to correlated barrier hoping has been observed from the of temperature dependence frequency exponent study. A crossover from negative to positive ac magnetoconductance has been observed at temperature T = 280 K and 230 K for unmilled (ZC0H) and 8 h (ZC8H) milled samples, respectively.

36 MATERIALS SCIENCE↗

Synthesis of CdTe/TiO{sub 2} nanoparticles and their photocatalytic activity

Graphical abstract: - Highlights: • CdTe/TiO{sub 2} photocatalysts were synthesized through a facile and convenient method. • The photosensitized degradation of RhB was largely enhanced by the composite. • Products prepared under MBSL condition exhibited higher photocatalytic activities. • The effect of MBSL had been investigated. - Abstract: Visible-light-induced CdTe/TiO{sub 2} photocatalysts were synthesized under multibubble sonoluminescence (MBSL) condition. The morphology, phase and optical properties of the products have been characterized by X-ray powder diffraction, field emission scan electron microscope, UV–vis absorption spectroscopy and photoluminescence spectroscopy. The results showed that as-prepared nanoparticles are well-crystallized with a better size distribution. In addition, the photocatalytic activities of products were evaluated using the photocatalytic degradation of rhodamine B as a probe reaction. The results showed that the products synthesized under MBSL condition exhibited higher photocatalytic activities than those without MBSL irradiation.

36 MATERIALS SCIENCE↗

Preparation, characterization and gas sensitivity of polypyrrole/γ-Fe{sub 2}O{sub 3} hybrid materials

Graphical abstract: - Highlights: • PPy/γ-Fe{sub 2}O{sub 3} hybrid materials were prepared by sol–gel polymerization in situ. • Different reactant molar ratios resulted in different microstructures of γ-Fe{sub 2}O{sub 3} and molecular weights of PPy. • PPy/γ-Fe{sub 2}O{sub 3} hybrids had selectivity for NH{sub 3} gases at low temperatures (<100 °C). • The sensing mechanism was suggested to be related to the existence of p–n heterojunctions in the PPy/γ-Fe{sub 2}O{sub 3} hybrid material. - Abstract: Polypyrrole (PPy)/γ-Fe{sub 2}O{sub 3} hybrid materials were prepared by sol–gel polymerization in situ and characterized by Fourier transform infrared (FT-IR), X-ray powder diffraction (XRD), thermogravimetric and differential thermal analysis (TG–DTA) and high-resolution transmission electron microscope (HRTEM). The gas sensitivities in CO, H{sub 2}, NH{sub 3}, ethanol or acetone atmospheres were determined at 30 °C, 60 °C and 90 °C. FT-IR and XRD patterns suggest that ferric oxide in the hybrids was γ-Fe{sub 2}O{sub 3}, with a diameter of approximately 5 nm. TG–DTA and HRTEM analyses showed that different reactant molar ratios of pyrrole monomer: Fe(NO{sub 3}){sub 3}·9H{sub 2}O resulted in different microstructures of γ-Fe{sub 2}O{sub 3} and molecular weights of PPy. An increased amount of Fe(NO{sub 3}){sub 3}·9H{sub 2}O increased the degree of uniformity of the molecular weight of PPy and resulted in a change of γ-Fe{sub 2}O{sub 3} microstructure from granular to stick particles. The results of gas sensitivities showed that the PPy/γ-Fe{sub 2}O{sub 3} hybrids exhibited high sensitivity to NH{sub 3} at mild operating temperature (<100 °C). Furthermore, the sensing mechanism was also discussed.

36 MATERIALS SCIENCE↗

The AMWCNTs supported porous nanocarbon composites for high-performance supercapacitor

Graphical abstract: The AMWCNTs supported porous nanocarbon composites were prepared by a easy method. The composites had shown good performances for electrochemical energy storage with high specific capacitance and good stability. - Highlights: • The AMWCNTs supported porous nanocarbon composites were prepared. • The composites have good conductivity and large BET specific surface areas. • The composites had shown high specific capacitance, and good stability. - Abstract: The porous nanocarbons supported by acid-treated multiwall carbon nanotubes (PC@ACNTs) were prepared by the combination of the hydrothermal polymerization of glucose on ACNTs, carbonization under N{sub 2} protection and final activation with ZnCl{sub 2}. The materials were characterized by transmission electron microscopy, X-ray powder diffraction and Raman spectra. The results indicated that the ACNTs distributed uniformly into the framework of the porous carbon. The composites showed the high BET specific surface area up to 1712 m{sup 2} g{sup −1} and good conductivity. The electrochemical measurements indicated that the composites processed good performances for electrochemical energy storage (210 F g{sup −1} at 0.5 A g{sup −1}), and high stability (>99.9%), much higher than the corresponding ACNTs, porous carbons and the samples prepared by using raw MWCNTs as source. The good performance of PC@ACNTs composites was relative with the synergy of good conductivity of ACNTs and large specific surface areas of PC.

36 MATERIALS SCIENCE↗

One step synthesis of Bi@Bi{sub 2}O{sub 3}@carboxylate-rich carbon spheres with enhanced photocatalytic performance

Graphical abstract: Functional groups of sodium gluconate play synergetic roles in the formation of Bi@Bi{sub 2}O{sub 3}@carboxylate-rich carbon core–shell nanosturctures (Bi@Bi{sub 2}O{sub 3}@CRCSs). Bi@Bi{sub 2}O{sub 3}@CRCSs exhibits significant enhanced photocatalytic activity under visible light irradiation. - Highlights: • One step synthesis of Bi@Bi{sub 2}O{sub 3}@carboxylate-rich carbon spheres. • Functional groups of sodium gluconate play synergetic roles in the formation of Bi@Bi{sub 2}O{sub 3}@CRCSs. • Bi@Bi{sub 2}O{sub 3}@CRCSs exhibits enhanced photocatalytic activity under visible light irradiation. - Abstract: Bi@Bi{sub 2}O{sub 3}@carboxylate-rich carbon core-shell nanosturctures (Bi@Bi{sub 2}O{sub 3}@CRCSs) have been synthesized via a one-step method. The core–shell nanosturctures of the as-prepared samples were confirmed by X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), and Raman spectroscopy. The formation of Bi@Bi{sub 2}O{sub 3}@CRCSs core–shell nanosturctures should attribute to the synergetic roles of different functional groups of sodium gluconate. Bi@Bi{sub 2}O{sub 3}@CRCSs exhibits significant enhanced photocatalytic activity under visible light irradiation (λ > 420 nm) and shows an O{sub 2}-dependent feature. According to trapping experiments of radicals and holes, hydroxyl radicals were not the main active oxidative species in the photocatalytic degradation of MB, but O{sub 2}·{sup −} are the main active oxidative species.

36 MATERIALS SCIENCE↗

Iron oxide hydroxide nanoflower assisted removal of arsenic from water

Graphical abstract: Non-magnetic polycrystalline iron oxide hydroxide nanoparticle with flower like morphology is found to play as an effective adsorbent media to remove As(III) from 300 μg L{sup −1} to less than 10 μg L{sup −1} from drinking water over wide range of pH. TEM image clearly reveals that the nanoparticle looks flower like morphology with average particle size less than 20 nm. The maximum sorption capacity of the sorbent is found to be 475 μg g{sup −1} for arsenic at room temperature and the data fitted to different isotherm models indicate the heterogeneity of the adsorbent surface. The material can be regenerated up to 70% using dilute hydrochloric acid and it would be utilized for de-arsenification purposes. - Highlights: • The work includes synthesis of iron oxide hydroxide nanoflower and its applicability for the removal of arsenic from water. • The nanoparticle was characterized using modern instrumental methods like FESEM, TEM, BET, XRD, etc. • The maximum sorption capacity of the sorbent is found to be 475 μg g{sup −1} for arsenic at room temperature. • The sorption is multilayered on the heterogeneous surface of the nano adsorbent. • The mechanism of arsenic removal of IOH nanoflower follows both adsorption and ion-exchange. - Abstract: Non-magnetic polycrystalline iron oxide hydroxide nanoparticle with flower like morphology is found to play as an effective adsorbent media to remove As(III) from 300 μg L{sup −1} to less than 10 μg L{sup −1} from drinking water over wide range of pH. The nanoparticle was characterized by X-ray powder diffraction analysis (XRD), BET surface area, FTIR, FESEM and TEM images. TEM image clearly reveals flower like morphology with average particle size less than 20 nm. The nanoflower morphology is also supported by FESEM images. The maximum sorption capacity of the sorbent is found to be 475 μg g{sup −1} for arsenic and the data fitted to different isotherm models indicate the heterogeneity of the adsorbent surface. Study on adsorption kinetics shows that adsorption of arsenic onto iron oxide hydroxide nanoflower follows pseudo-second order kinetic. The material can be regenerated up to 70% using dilute hydrochloric acid and it would be utilized for de-arsenification purposes.

36 MATERIALS SCIENCE↗

Chemical pressure effects on structural, dielectric and magnetic properties of solid solutions Mn{sub 3−x}Co{sub x}TeO{sub 6}

Highlights: • Mn{sub 3}TeO{sub 6} and Co{sub 3}TeO{sub 6} are antiferromagnets with corundum related structures. • The structural and magnetic properties of Mn{sub 3−x}Co{sub x}TeO{sub 6} ceramics were investigated. • All compounds adopt the trigonal structure of Mn{sub 3}TeO{sub 6} up to at least x = 2.4. • The antiferromagnetic transition temperature monotonously increases with x. • NPD data evidences the magnetic structure of the Mn{sub 3−x}Co{sub x}TeO{sub 6} ceramics. - Abstract: The effects of Co{sup 2+} doping on the structural, magnetic and dielectric properties of the multiferroic frustrated antiferromagnet Mn{sub 3}TeO{sub 6} have been investigated. Ceramic samples of the solid solution series Mn{sub 3−x}Co{sub x}TeO{sub 6} were prepared by a solid-state reaction route. X-ray and neutron powder diffraction and electron microscopy techniques were combined with calorimetric, dielectric and magnetic measurements to investigate the dependence of the crystal structure and physical properties on temperature and composition. It is shown that the compounds with x ≤ 2.4 adopt the trigonal corundum-related structure of pure Mn{sub 3}TeO{sub 6} (space group R3{sup ¯}) in the temperature range 5–295 K and that the lattice parameters a and c and the unit-cell volume V decrease linearly with increasing Co{sup 2+} concentration. The low-temperature magnetic susceptibility and heat capacity data evidence the antiferromagnetic ordering of all samples. The Neel temperature linearly increases with Co{sup 2+} concentration x. Curie–Weiss fits of the high temperature susceptibility indicate that the magnetic frustration decreases with x. The derived magnetic structure of Mn{sub 3}TeO{sub 6} can be described as an incommensurately modulated magnetic spin state with k = [0, 0, k{sub z}] and an elliptical spin-spiral order of spins within the chains of MnO{sub 6} octahedra. With increasing Co{sup 2+} concentration the propagation vector k{sub z} changes from 0.453 (x = 0) to 0.516 (x = 2.4). The magnetic anisotropy changes as well, leading to a reorientation of the spiral-basal plane. A possible coexistence of long-range order of electrical dipoles and magnetic moments in Mn{sub 3−x}Co{sub x}TeO{sub 6} is discussed.

36 MATERIALS SCIENCE↗

In situ synthesis of TiH{sub 2} layer on metallic titanium foil through gaseous hydrogen free acid-hydrothermal method

Graphical abstract: The reaction mechanism for in situ synthesizing TiH{sub 2} layer on titanium foil by a gaseous hydrogen free acid-hydrothermal methodology. - Highlights: • A dense TiH{sub 2} layer is synthesized by a hydrogen free acid-hydrothermal method. • Hydrogen in a TiH{sub 2} layer synthesized can release at low temperature. • During the dehydrogenation process, there is no any intermediate phase forming. • We report a method of low-cost, low-risk and convenience toward productive TiH{sub 2}. - Abstract: A novel strategy for synthesis of TiH{sub 2} layer on surface of metallic titanium by using an acid-hydrothermal method was proposed. During the synthesis process, no any elemental hydrogen was involved. X-ray powder diffraction, energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy and scanning electron microscopy results confirmed that a TiH{sub 2} layer of 20 μm thickness on a Ti foil surface can be formed in situ by an interface reaction of metallic titanium with sulfuric acid solution, hydrochloric acid, or phosphoric acid, which is a hydrogen self-storage process. By tuning reaction parameters, for example, concentration of acid, composition and morphology of TiH{sub 2}-Ti hybrid materials can be adjusted. The TiH{sub 2} layer on a metallic titanium surface can be decompounded completely heated below 400 °C. This convenient, safe and low-cost method is a promising gaseous hydrogen free approach for the synthesis of hydride-based hydrogen storage materials.

36 MATERIALS SCIENCE↗

Synthesis of g-C{sub 3}N{sub 4}/Ag{sub 3}PO{sub 4} heterojunction with enhanced photocatalytic performance

Graphical abstract: g-C{sub 3}N{sub 4}/Ag{sub 3}PO{sub 4} heterojunction photocatalyst with visible-light response was prepared by a facile coprecipitation method. The results show that g-C{sub 3}N{sub 4}/Ag{sub 3}PO{sub 4} possesses a much higher activity for the decomposition of RhB than that of the pure Ag{sub 3}PO{sub 4} particles. The most mechanism is that g-C{sub 3}N{sub 4}/Ag{sub 3}PO{sub 4} heterojunction photocatalyst can efficiently separate the photogenerated electron–hole pairs, enhancing the photocatalytic activity of g-C{sub 3}N{sub 4}/Ag{sub 3}PO{sub 4} composites. - Highlights: • g-C{sub 3}N{sub 4}/Ag{sub 3}PO{sub 4} heterojunction showed much higher activity than that of Ag{sub 3}PO{sub 4}. • The high activity could be attributed to g-C{sub 3}N{sub 4} for modifying Ag{sub 3}PO{sub 4}. • More ·OH radicals may be significant reason to improve Ag{sub 3}PO{sub 4} activity. - Abstract: g-C{sub 3}N{sub 4}/Ag{sub 3}PO{sub 4} heterojunction photocatalyst with visible-light response was prepared by a facile coprecipitation method. The photocatalysts were characterized by X-ray powder diffraction, transmission electron microscopy, UV–vis absorption spectroscopy and Fourier transform infrared spectroscopy. The photocatalytic activities of the obtained samples were tested by using Rhodamine B (RhB) as the degradation target under visible light irradiation. g-C{sub 3}N{sub 4}/Ag{sub 3}PO{sub 4} decomposed RhB more effectively than the pure Ag{sub 3}PO{sub 4} particles did, and 2 wt.% g-C{sub 3}N{sub 4} had the highest activity. Furthermore, 2 wt.% g-C{sub 3}N{sub 4}/Ag{sub 3}PO{sub 4} degraded high-concentration RhB more potently than unmodified Ag{sub 3}PO{sub 4} did, probably because g-C{sub 3}N{sub 4}/Ag{sub 3}PO{sub 4} heterojunction photocatalyst enhanced the photocatalytic activity by efficiently separating the photogenerated electron–hole pairs.

36 MATERIALS SCIENCE↗