Search NASA⌕ Search

SEARCH · Search NASA

Results for “problems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Finite element implementation of Robinson's unified viscoplastic model and its application to some uniaxial and multiaxial problems

A description of the finite element implementation of Robinson's unified viscoplastic model into the General Purpose Finite Element Program (MARC) is presented. To demonstrate its application, the implementation is applied to some uniaxial and multiaxial problems. A comparison of the results for the multiaxial problem of a thick internally pressurized cylinder, obtained using the finite element implementation and an analytical solution, is also presented. The excellent agreement obtained confirms the correct finite element implementation of Robinson's model.

Arya, V. K.↗
NASA NTRS1989

Analytical and finite element solutions of some problems using a viscoplastic model

The feasibility of using a viscoplastic model developed by Robinson to perform a nonlinear structural analysis was investigated. The paper presents analytical solutions for three classical problems: (1) a pressurized thick-walled cylinder, (2) a thin rotating disk, and (3) a pressurized thick-walled sphere. The analytical expressions derived for the stress and the strain rates for these components are general in nature as they consider both the mechanical and thermal loadings to be time-dependent. A computer program VISTAN (VIscoplastic STructural ANalyzer) was developed to obtain the stress and strain distributions. The finite element solutions for these problems are also presented. The numerical results pertaining to isothermal loading conditions are provided. The results obtained demonstrate the feasibility of using the viscoplastic model developed by Robinson to perform nonlinear structural analyses.

Arya, V. K.↗
NASA NTRS1989

Assessment of structural analysis technology for elastic shell collapse problems

The prediction of the ultimate load carrying capability for compressively loaded shell structures is a challenging nonlinear analysis problem. Selected areas of finite element technology research and nonlinear solution technology are assessed. Herein, a finite element analysis procedure is applied to four shell collapse problems which have been used by computational structural mechanics researchers in the past. This assessment will focus on a number of different shell element formulations and on different approaches used to account for geometric nonlinearities. The results presented confirm that these aspects of nonlinear shell analysis can have a significant effect on the predicted nonlinear structural response. All analyses were performed using the CSM Testbed software system which allowed a convenient assessment of different element formulations with a consistent approach to solving the discretized nonlinear equations.

Knight, N. F., Jr.↗
NASA NTRS1990

The vortex flap F-106B, overcoming safety and data problems in flight testing

A NASA, F-106B airplane equipped with a vortex flap is establishing a data base for calibration of design and analysis tools for this vortical flow control concept. Some of the problems in safely and precisely flying to research data points were caused by the modified airplane's low longitudinal stability and low margin of structural strength. These characteristics are, in part, a consequence of the program's low cost approach which utilizes a bolt-on, ground-adjustable flap attached to a minimally modified airplane. Presently, the 40-degree flap deflection flight research is being concluded with a flow visualization phase. A similar pattern of flight envelope expansion, pressure distribution, performance, and flow visualization phases remain to be accomplished for the 30-degree flap setting. To date, good research flight data has followed resolution of the safety and data problems described.

Brown, Philip W.↗
NASA NTRS1990

National Transonic Facility model and model support vibration problems

Vibrations of models and model support system were encountered during testing in the National Transonic Facility. Model support system yaw plane vibrations have resulted in model strain gage balance design load limits being reached. These high levels of vibrations resulted in limited aerodynamic testing for several wind tunnel models. The yaw vibration problem was the subject of an intensive experimental and analytical investigation which identified the primary source of the yaw excitation and resulted in attenuation of the yaw oscillations to acceptable levels. This paper presents the principal results of analyses and experimental investigation of the yaw plane vibration problems. Also, an overview of plans for development and installation of a permanent model system dynamic and aeroelastic response measurement and monitoring system for the National Transonic Facility is presented.

Young, Clarence P., Jr.↗
NASA NTRS1990

Fuel-optimal trajectories for aeroassisted coplanar orbital transfer problem

The optimal control problem arising in coplanar orbital transfer employing aeroassist technology is addressed. The maneuver involves the transfer from high to low earth orbit via the atmosphere, with the object of minimizing the total fuel consumption. Simulations are carried out to obtain the fuel-optimal trajectories for flying the spacecraft through the atmosphere. A highlight is the application of an efficient multiple-shooting method for treating the nonlinear two-point boundary value problem resulting from the optimizaion procedure. The strategy for the atmospheric portion of the minimum-fuel transfer is to fly at the maximum lift-to-drag ratio L/D initially in order to recover from the downward plunge, and then to fly at a negative L/D to level off the flight so that the vehicle skips out of the atmosphere with a flight path angle near zero degrees.

Naidu, Desineni Subbaramaiah↗
NASA NTRS1989

Convergence of infinite dimensional sampled LQR problems - Theory and numerical results

A theory is developed for the convergence of the closed-loop solution to infinite-dimensional discrete-time linear-quadratic regulator (LQR) problems on the infinite time interval to the solution of a corresponding continuous-time LQR problem as the length of the sampling interval tends toward zero. Convergence of solutions to the operator algebraic Riccati equation and corresponding optimal feedback control gains is guaranteed under appropriate uniform stabilizability and detectability conditions and consistent sampling. Also presented are numerical results involving the optimal LQ control of a heat or diffusion equation, a hereditary or delay differential equation, and a hybrid system of ordinary and partial differential equations describing the transverse vibration of a cantilevered Voigt-Kelvin viscoelastic beam with tip mass.

Rosen, I. G.↗
NASA NTRS1989

Algebraic multigrid methods applied to problems in computational structural mechanics

The development of algebraic multigrid (AMG) methods and their application to certain problems in structural mechanics are described with emphasis on two- and three-dimensional linear elasticity equations and the 'jacket problems' (three-dimensional beam structures). Various possible extensions of AMG are also described. The basic idea of AMG is to develop the discretization sequence based on the target matrix and not the differential equation. Therefore, the matrix is analyzed for certain dependencies that permit the proper construction of coarser matrices and attendant transfer operators. In this manner, AMG appears to be adaptable to structural analysis applications.

Mccormick, Steve↗
NASA NTRS1990

Inelastic transient dynamic analysis of three-dimensional problems by BEM

A general direct boundary element formulation and its numerical implementation for solving transient dynamic problems of three-dimensional isotropic homogeneous or piecewise homogeneous solids involving material nonlinearities are presented. The algorithm produces accurate results for static nonlinear problems by using large time steps. When a large value of yield stress is selected, the incremental inelastic transient algorithm produces results identical to those obtained by elastodynamic analysis.

Ahmad, S.↗
NASA NTRS1991

Algorithm For Solution Of Subset-Regression Problems

Reliable and flexible algorithm for solution of subset-regression problem performs QR decomposition with new column-pivoting strategy, enables selection of subset directly from originally defined regression parameters. This feature, in combination with number of extensions, makes algorithm very flexible for use in analysis of subset-regression problems in which parameters have physical meanings. Also extended to enable joint processing of columns contaminated by noise with those free of noise, without using scaling techniques.

Verhaegen, Michel↗
NASA NTRS1991

Solving Constraint-Satisfaction Problems In Prolog Language

Technique for solution of constraint-satisfaction problems uses definite-clause grammars of Prolog computer language. Exploits fact that grammar-rule notation viewed as "state-change notation". Facilitates development of dynamic representation performing informed as well as blind searches. Applicable to design, scheduling, and planning problems.

Nachtsheim, Philip R.↗
NASA NTRS1991

Two Point Exponential Approximation Method for structural optimization of problems with frequency constraints

The point exponential approximation method was introduced by Fadel et al. (Fadel, 1990), and tested on structural optimization problems with stress and displacement constraints. The reports in earlier papers were promising, and the method, which consists of correcting Taylor series approximations using previous design history, is tested in this paper on optimization problems with frequency constraints. The aim of the research is to verify the robustness and speed of convergence of the two point exponential approximation method when highly non-linear constraints are used.

Fadel, G. M.↗
NASA NTRS1990

ADRPM-VII applied to the long-range acoustic detection problem

An acoustic detection range prediction model (ADRPM-VII) has been written for IBM PC/AT machines running on the MS-DOS operating system. The software allows the user to predict detection distances of ground combat vehicles and their associated targets when they are involved in quasi-military settings. The program can also calculate individual attenuation losses due to spherical spreading, atmospheric absorption, ground reflection and atmospheric refraction due to temperature and wind gradients while varying parameters effecting the source-receiver problem. The purpose here is to examine the strengths and limitations of ADRPM-VII by modeling the losses due to atmospheric refraction and ground absorption, commonly known as excess attenuation, when applied to the long range detection problem for distances greater than 3 kilometers.

Shalis, Edward↗
NASA NTRS1990

Orbiting Debris: a Space Environmental Problem. Background Paper

Man-made debris, now circulating in a multitude of orbits about Earth as the result of the exploration and use of the space environment, poses a growing hazard to future space operations. The 6,000 or so debris objects large enough to be cataloged by the U.S. Space Surveillance Network are only a small percentage of the total debris capable of damaging spacecraft. Unless nations reduce the amount of orbital debris they produce, future space activities could suffer loss of capability, destruction of spacecraft, and perhaps even loss of life as a result of collisions between spacecraft and debris. Better understanding of the extent and character of "space junk" will be crucial for planning future near-Earth missions, especially those projects involving humans in space. This OTA background paper summarizes the current state of knowledge about the causes and distribution of orbiting debris, and examines R&D needs for reducing the problem. As this background paper notes, addressing the problem will require the involvement of all nations active in space. The United States has taken the lead to increase international understanding of the issue but much work lies ahead. In undertaking this background paper, OTA sought the contributions of a broad spectrum of knowledgeable individuals and organizations. Some provided information, others reviewed drafts. OTA gratefully acknowledges their contributions of time and intellectual effort. As with all OTA studies, the content of this background paper is the sole responsibility .of the Office of Technology Assessment and does not necessarily represent the views of our advisors or reviewers.

Lionel S. Johns↗
NASA NTRS1990

The application of CFD to rotary wing flow problems

Rotorcraft aerodynamics is especially rich in unsolved problems, and for this reason the need for independent computational and experimental studies is great. Three-dimensional unsteady, nonlinear potential methods are becoming fast enough to enable their use in parametric design studies. At present, combined CAMRAD/FPR analyses for a complete trimmed rotor soltution can be performed in about an hour on a CRAY Y-MP (or ten minutes, with multiple processors). These computational speeds indicate that in the near future many of the large CFD problems will no longer require a supercomputer. The ability to convect circulation is routine for integral methods, but only recently was it discovered how to do the same with differential methods. It is clear that the differential CFD rotor analyses are poised to enter the engineering workplace. Integral methods already constitute a mainstay. Ultimately, it is the users who will integrate CFD into the entire engineering process and provide a new measure of confidence in design and analysis. It should be recognized that the above classes of analyses do not include several major limiting phenomena which will continue to require empirical treatment because of computational time constraints and limited physical understanding. Such empirical treatment should be included, however, into the developing CFD, engineering level analyses. It is likely that properly constructed flow models containing corrections from physical testing will be able to fill in unavoidable gaps in the experimental data base, both for basic studies and for specific configuration testing. For these kinds of applications, computational cost is not an issue. Finally, it should be recognized that although rotorcraft are probably the most complex of aircraft, the rotorcraft engineering community is very small compared to the fixed-wing community. Likewise, rotorcraft CFD resources can never achieve fixed-wing proportions and must be used wisely. Therefore the fixed-wing work must be gleaned for many of the basic methods.

Caradonna, F. X.↗
NASA NTRS1991

An analysis of the least-squares problem for the DSN systematic pointing error model

A systematic pointing error model is used to calibrate antennas in the Deep Space Network. The least squares problem is described and analyzed along with the solution methods used to determine the model's parameters. Specifically studied are the rank degeneracy problems resulting from beam pointing error measurement sets that incorporate inadequate sky coverage. A least squares parameter subset selection method is described and its applicability to the systematic error modeling process is demonstrated on Voyager 2 measurement distribution.

Alvarez, L. S.↗
NASA NTRS1988

Problems in characterizing barrier performance

The barrier is a synchronization construct which is useful in separating a parallel program into parallel sections which are executed in sequence. The completion of a barrier requires cooperation among all executing processes. This requirement not only introduces the wait for the slowest process delay which is inherent in the definition of the synchronization, but also has implications for the efficient implementation and measurement of barrier performance in different systems. Types of barrier implementation and their relationship to different multiprocessor environments are described. Then the problem of measuring the performance of barrier implementations on specific machine architecture is discussed. The fact that the barrier synchronization requires the cooperation of all processes makes the problem of performance measurement similarly global. Making non-intrusive measurements of sufficient accuracy can be tricky on systems offering only rudimentary measurement tools.

Jordan, Harry F.↗
NASA NTRS1990

Mechanical design problems associated with turbopump fluid film bearings

Most high speed cryogenic turbopumps for liquid propulsion rocket engines currently use ball or roller contact bearings for rotor support. The operating speeds, loads, clearances, and environments of these pumps combine to make bearing wear a limiting factor on turbopump life. An example is the high pressure oxygen turbopump (HPOTP) used in the Space Shuttle Main Engine (SSME). Although the HPOTP design life is 27,000 seconds at 30,000 rpms, or approximately 50 missions, bearings must currently be replaced after 2 missions. One solution to the bearing wear problem in the HPOTP, as well as in future turbopump designs, is the utilization of fluid film bearings in lieu of continuous contact bearings. Hydrostatic, hydrodynamic, and damping seal bearings are all replacement candidates for contact bearings in rocket engine high speed turbomachinery. These three types of fluid film bearings have different operating characteristics, but they share a common set of mechanical design opportunities and difficulties. Results of research to define some of the mechanical design issues are given. Problems considered include transient strat/stop rub, non-operational rotor support, bearing wear inspection and measurement, and bearing fluid supply route. Emphasis is given to the HPOTP preburner pump (PBP) bearing, but the results are pertinent to high-speed cryogenic turbomachinery in general.

Evces, Charles R.↗