Search NASA⌕ Search

SEARCH · Search NASA

Results for “process modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Integrated Predictive Tools for Customizing Microstructure and Material Properties of Additively Manufactured Aerospace Components

Additive Manufacturing (AM) refers to a process by which digital three-dimensional (3-D) design data is converted to build up a component by depositing material layer-by-layer. United Technologies Corporation (UTC) is currently involved in fabrication and certification of several AM aerospace structural components made from aerospace materials. This is accomplished by using optimized process parameters determined through numerous design-of-experiments (DOE)-based studies. Certification of these components is broadly recognized as a significant challenge, with long lead times, very expensive new product development cycles and very high energy consumption. Because of these challenges, United Technologies Research Center (UTRC), together with UTC business units have been developing and validating an advanced physics-based process model. The specific goal is to develop a physics-based framework of an AM process and reliably predict fatigue properties of built-up structures as based on detailed solidification microstructures. Microstructures are predicted using process control parameters including energy source power, scan velocity, deposition pattern, and powder properties. The multi-scale multi-physics model requires solution and coupling of governing physics that will allow prediction of the thermal field and enable solution at the microstructural scale. The state-of-the-art approach to solve these problems requires a huge computational framework and this kind of resource is only available within academia and national laboratories. The project utilized the parallel phase-fields codes at Oak Ridge National Laboratory (ORNL) and Lawrence Livermore National Laboratory (LLNL), along with the high-performance computing (HPC) capabilities existing at the two labs to demonstrate the simulation of multiple dendrite growth in threedimensions (3-D). The LLNL code AMPE was used to implement the UTRC phase field model that was previously developed for a model binary alloy, and the simulation results were compared against the UTRC simulation results, followed by extension of the UTRC model to simulate multiple dendrite growth in 3-D. The ORNL MEUMAPPS code was used to simulate dendritic growth in a model ternary alloy with the same equilibrium solidification range as the Ni-base alloy 718 using realistic model parameters, including thermodynamic integration with a Calphad based model for the ternary alloy. Implementation of the UTRC model in AMPE met with several numerical and parametric issues that were resolved and good comparison between the simulation results obtained by the two codes was demonstrated for two dimensional (2-D) dendrites. 3-D dendrite growth was then demonstrated with the AMPE code using nondimensional parameters obtained in 2-D simulations. Multiple dendrite growth in 2-D and 3-D were demonstrated using ORNL’s MEUMAPPS code using simple thermal boundary conditions. MEUMAPPS was then modified to incorporate the complex, time-dependent thermal boundary conditions obtained by UTRC’s thermal modeling of single track AM experiments to drive the phase field simulations. The results were in good agreement with UTRC’s experimental measurements.

36 MATERIALS SCIENCE↗

AIF for Vis (Active Inference for simulating human interpretation of data visualization) [SWR-26-084]

AIF for Vis contains the Active Inference models and analysis scripts used to study a simple visualization-interpretation task: estimating the average value of two bars in a bar chart. The work is a proof of concept for translating hypothesized cognitive strategies into executable, inspectable process models. We implement two idealized strategies inspired by dual-process accounts of visualization-aided decision making: *Fast model: a compressed, heuristic strategy that estimates the visual midpoint of the two bars and maintains a single belief over their average. *Slow model: a sequential, analytic strategy that estimates the two bar heights separately and maintains them in working memory before computing an average. Both models use a common Active-Inference-inspired framework for sequential perception, belief updating, action selection, and reporting. Their different internal representations produce distinct predicted vulnerabilities: *the Fast model is more susceptible to tick-salience bias; *the Slow model is more susceptible to working-memory decay. The repository includes the model implementations, scripts used for the experiments reported in the paper, precomputed trial-level results, and plotting scripts.

Goldwyn, Harrison [National Laboratory of the Rock↗

Surrogate multi-fidelity data and model fusion for scientific discovery and uncertainty quantification in Earth System Models

This whitepaper addresses the Earth and Environmental Systems Sciences Division (EESSD)’s predictability challenges in modeling the integrated water cycle and data-model integration. Specifically, it focuses on reducing and characterizing the uncertainty in the representation of process models for unresolved physics, either due to model resolution or limited by the physical under standing or computational efficiency, and the use of observational data for in-situ process parameter optimization within ESM. The described methods may also be used to determine the nature of responses (e.g. strength and direction), and hence to identify critical processes that drive the overall ESM responses to perturbation in the forcing

54 ENVIRONMENTAL SCIENCES↗

Net energy ratio for the production of steam pretreated biomass-based pellets

In this study, a process model was developed to determine the net energy ratio (NER) for both regular and steam-pretreated pellet production from ligno-cellulosic biomass. NER is a ratio of the net energy output to the total net energy input from non-renewable energy source into the system. Scenarios were developed to measure the effect of temperature and level of steam pretreatment on the NER of both production processes. The NER for the base case at 6 kg h –1 is 1.29 and 5.0 for steam-pretreated and regular pellet production respectively. However, at the large scale NER would improve. The major factor for NER is energy for steam and drying unit. The sensitivity analysis for the model shows that the optimum temperature for steam pretreatment is 200 °C with 50% pretreatment (Steam pretreating 50% feed stock, while the rest is undergoing regular pelletization). Uncertainty result for steam pretreated and regular pellet is 1.35 ± 0.09 and 4.52 ± 0.34 respectively.

09 BIOMASS FUELS↗

Ringed seal demography in a changing climate

Abstract Climate change is affecting species’ distributions and abundances worldwide. Baseline population estimates, against which future observations may be compared, are necessary if we are to detect ecological change. Arctic sea ice ecosystems are changing rapidly and we lack baseline population estimates for many ice‐associated species. Provided we can detect them, changes in Arctic marine ecosystems may be signaled by changes in indicator species such as ringed seals ( Pusa hispida ). Ringed seal monitoring has provided estimates of survival and fertility rates, but these have not been used for population‐level inference. Using matrix population models, we synthesized existing demographic parameters to obtain estimates of historical ringed seal population growth and structure in Amundsen Gulf and Prince Albert Sound, Canada. We then formalized existing hypotheses about the effects of emerging environmental stressors (i.e., earlier spring ice breakup and reduced snow depth) on ringed seal pup survival. Coupling the demographic model to ice and snow forecasts available from the Coupled Model Intercomparison Project resulted in projections of ringed seal population size and structure up to the year 2100. These projections showed median declines in population size ranging from 50% to 99%. Corresponding to these projected declines were substantial changes in population structure, with increasing proportions of ringed seal pups and adults and declining proportions of juveniles. We explored if currently collected, harvest‐based data could be used to detect the projected changes in population stage structure. Our model suggests that at a present sample size of 100 seals per year, the projected changes in stage structure would only be reliably detected by mid‐century, even for the most extreme climate models. This modeling process revealed inconsistencies in existing estimates of ringed seal demographic rates. Mathematical population models such as these can contribute both to understanding past population trends as well as predicting future ones, both of which are necessary if we are to detect and interpret future observations.

Reimer, Jody R.↗

Search for supersymmetry in events with a photon, a lepton, and missing transverse momentum in proton-proton collisions at s = 13 TeV

Results of a search for supersymmetry are presented using events with a photon, an electron or muon, and large missing transverse momentum. The analysis is based on a data sample corresponding to an integrated luminosity of 35.9 fb$^{-1}$ of proton-proton collisions at $\sqrt{s} =$ 13 TeV, produced by the LHC and collected with the CMS detector in 2016. Theoretical models with gauge-mediated supersymmetry breaking predict events with photons in the final state, as well as electroweak gauge bosons decaying to leptons. Searches for events with a photon, a lepton, and missing transverse momentum are sensitive probes of these models. No excess of events is observed beyond expectations from standard model processes. The results of the search are interpreted in the context of simplified models inspired by gauge-mediated supersymmetry breaking. These models are used to derive upper limits on the production cross sections and set lower bounds on masses of supersymmetric particles. Gaugino masses below 930 GeV are excluded at the 95% confidence level in a simplified model with electroweak production of a neutralino and chargino. For simplified models of gluino and squark pair production, gluino masses up to 1.75 TeV and squark masses up to 1.43 TeV are excluded at the 95% confidence level.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for direct top squark pair production in events with one lepton, jets, and missing transverse momentum at 13 TeV with the CMS experiment

A search for direct top squark pair production is presented. The search is based on proton-proton collision data at a center-of-mass energy of 13 TeV recorded by the CMS experiment at the LHC during 2016, 2017, and 2018, corresponding to an integrated luminosity of 137 fb$^{−1}$. The search is carried out using events with a single isolated electron or muon, multiple jets, and large transverse momentum imbalance. The observed data are consistent with the expectations from standard model processes. Exclusions are set in the context of simplified top squark pair production models. Depending on the model, exclusion limits at 95% confidence level for top squark masses up to 1.2 TeV are set for a massless lightest supersymmetric particle, assumed to be the neutralino. For models with top squark masses of 1 TeV, neutralino masses up to 600 GeV are excluded.[graphic not available: see fulltext]

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Leveraging prior mean models for faster Bayesian optimization of particle accelerators

Tuning particle accelerators is a challenging and time-consuming task that can be automated and carried out efficiently using suitable optimization algorithms, such as model-based Bayesian optimization techniques. One of the major advantages of Bayesian algorithms is the ability to incorporate prior information about beam physics and historical behavior into the model used to make control decisions. In this work, we examine incorporating prior accelerator physics information into Bayesian optimization algorithms by utilizing fast executing, neural network models trained on simulated or historical datasets as prior mean functions in Gaussian process models. We show that in ideal cases, this technique substantially increases convergence speed to optimal solutions in high-dimensional tuning parameter spaces. Additionally, we demonstrate that even in non-ideal cases, where prior models of beam dynamics do not exactly match experimental conditions, the use of this technique can still enhance convergence speed. Finally, we demonstrate how these methods can be used to improve optimization in practical applications, such as transferring information gained from beam dynamics simulations to online control of the LCLS injector, and transferring knowledge gained from experimental measurements across different operating modes, such as accelerating different ion species at the ATLAS heavy ion accelerator.

43 PARTICLE ACCELERATORS↗

Accelerating Scientific Simulations with Bi-Fidelity Weighted Transfer Learning

High-fidelity modeling is an essential design tool for many engineering applications. However, for complex systems, computational cost can be a limiting factor. Analyzing parameter sensitivity, uncertainty quantification, and design optimization require many model evaluations. Surrogate models are often used to develop the relationship between model parameters and quantities of interest. However, in the case of complex systems, surrogate models require several degrees of freedom and, thus, a large number of data points to determine the correct dependencies. For many applications, this may be prohibitively expensive. The reduction of computational requirements can be achieved by leveraging low-fidelity models. Low-fidelity models represent the system at a coarser resolution with the advantage of computational efficiency. Therefore, a bi-fidelity modeling paradigm, which augments the accuracy of a low-fidelity model in a computationally efficient manner by invoking limited runs of a high-fidelity model, can be leveraged to sufficiently balance the accuracy and computational requirements. In this work, a bi-fidelity weighted transfer learning method using neural networks was applied to a computational fluid dynamics heat transfer modeling problem. The transfer learning advantage was investigated as a function of hyperparameters. Our main finding is that the use of a bi-fidelity modeling paradigm achieves accuracy close to that of a high-fidelity Gaussian process model while significantly reducing computational cost. The bi-fidelity model achieves comparable performance with 90 high-fidelity samples-that is, 60% less than the samples needed to achieve similar accuracy without the use of bi-fidelity modeling,

Borowiec, Katarzyna↗

VCAT: Visual Crosswalk Analysis Tool [Slides]

VCAT is a knowledge modeling and analysis tool. It was synthesized from ideas in functional analysis, business process modeling, and complex network science. VCAT discovers synergies by analyzing natural language descriptions. Specifically, it creates visual analytic perspectives that capture intended organization structures, then overlays the serendipitous relationships that point to potential synergies within an organization or across multiple organizations.

97 MATHEMATICS AND COMPUTING↗

An introduction to chaotic and random time series analysis

The origin of chaotic behavior and the relation of chaos to randomness are explained. Two mathematical results are described: (1) a representation theorem guarantees the existence of a specific time-domain model for chaos and addresses the relation between chaotic, random, and strictly deterministic processes; (2) a theorem assures that information on the behavior of a physical system in its complete state space can be extracted from time-series data on a single observable. Focus is placed on an important connection between the dynamical state space and an observable time series. These two results lead to a practical deconvolution technique combining standard random process modeling methods with new embedded techniques.

Scargle, Jeffrey D.↗

Design Application Translates 2-D Graphics to 3-D Surfaces

Fabric Images Inc., specializing in the printing and manufacturing of fabric tension architecture for the retail, museum, and exhibit/tradeshow communities, designed software to translate 2-D graphics for 3-D surfaces prior to print production. Fabric Images' fabric-flattening design process models a 3-D surface based on computer-aided design (CAD) specifications. The surface geometry of the model is used to form a 2-D template, similar to a flattening process developed by NASA's Glenn Research Center. This template or pattern is then applied in the development of a 2-D graphic layout. Benefits of this process include 11.5 percent time savings per project, less material wasted, and the ability to improve upon graphic techniques and offer new design services. Partners include Exhibitgroup/Giltspur (end-user client: TAC Air, a division of Truman Arnold Companies Inc.), Jack Morton Worldwide (end-user client: Nickelodeon), as well as 3D Exhibits Inc., and MG Design Associates Corp.

Source record↗

Efficient Variable-Pitch Propeller Aerodynamic Model Development for Vectored-Thrust eVTOL Aircraft

This paper describes a variable-pitch propeller testing and aerodynamic modeling methodology for electric vertical takeoff and landing (eVTOL) aircraft using wind tunnel testing. Propellers used for eVTOL aircraft propulsion systems experience a wide range of operating conditions resulting in significant variation of axial thrust and torque, as well as off-axis forces and moments, across a typical flight envelope. An experimental design is developed to collect informative wind tunnel data in an efficient manner using response surface methods. System identification methods are then applied to isolated propeller wind tunnel data to develop a mathematical model of the propeller valid throughout the transition envelope of a vectored-thrust eVTOL aircraft. Multiple explanatory variable definitions are postulated and compared using modeling and prediction performance metrics. Modeling results validated against data withheld from the modeling process indicate good predictive capability and agree with theoretical expectations. All identified propeller models are provided, which allows the models to be used in future eVTOL aircraft flight dynamics simulations.

aerodynamic modeling↗

LIQUID BIO-FUEL PRODUCTION FROM NON-FOOD BIOMASS VIA HIGH TEMPERATURE STEAM ELECTROLYSIS

Bio-Syntrolysis is a hybrid energy process that enables production of synthetic liquid fuels that are compatible with the existing conventional liquid transportation fuels infrastructure. Using biomass as a renewable carbon source, and supplemental hydrogen from high-temperature steam electrolysis (HTSE), bio-syntrolysis has the potential to provide a significant alternative petroleum source that could reduce US dependence on imported oil. Combining hydrogen from HTSE with CO from an oxygen-blown biomass gasifier yields syngas to be used as a feedstock for synthesis of liquid transportation fuels via a Fischer-Tropsch process. Conversion of syngas to liquid hydrocarbon fuels, using a biomass-based carbon source, expands the application of renewable energy beyond the grid to include transportation fuels. It can also contribute to grid stability associated with non-dispatchable power generation. The use of supplemental hydrogen from HTSE enables greater than 90% utilization of the biomass carbon content which is about 2.5 times higher than carbon utilization associated with traditional cellulosic ethanol production. If the electrical power source needed for HTSE is based on nuclear or renewable energy, the process is carbon neutral. INL has demonstrated improved biomass processing prior to gasification. Recyclable biomass in the form of crop residue or energy crops would serve as the feedstock for this process. A process model of syngas production using high temperature electrolysis and biomass gasification is presented. Process heat from the biomass gasifier is used to heat steam for the hydrogen production via the high temperature steam electrolysis process. Oxygen produced form the electrolysis process is used to control the oxidation rate in the oxygen-blown biomass gasifier. Based on the gasifier temperature, 94% to 95% of the carbon in the biomass becomes carbon monoxide in the syngas (carbon monoxide and hydrogen). Assuming the thermal efficiency of the power cycle for electricity generation is 50%, (as expected from GEN IV nuclear reactors), the syngas production efficiency ranges from 70% to 73% as the gasifier temperature decreases from 1900 K to 1500 K. Parametric studies of system pressure, biomass moisture content and low temperature alkaline electrolysis are also presented.

02 PETROLEUM↗

Bio-Fuel Production Assisted with High Temperature Steam Electrolysis

Two hybrid energy processes that enable production of synthetic liquid fuels that are compatible with the existing conventional liquid transportation fuels infrastructure are presented. Using biomass as a renewable carbon source, and supplemental hydrogen from high-temperature steam electrolysis (HTSE), these two hybrid energy processes have the potential to provide a significant alternative petroleum source that could reduce dependence on imported oil. The first process discusses a hydropyrolysis unit with hydrogen addition from HTSE. Non-food biomass is pyrolyzed and converted to pyrolysis oil. The pyrolysis oil is upgraded with hydrogen addition from HTSE. This addition of hydrogen deoxygenates the pyrolysis oil and increases the pH to a tolerable level for transportation. The final product is synthetic crude that could then be transported to a refinery and input into the already used transportation fuel infrastructure. The second process discusses a process named Bio-Syntrolysis. The Bio-Syntrolysis process combines hydrogen from HTSE with CO from an oxygen-blown biomass gasifier that yields syngas to be used as a feedstock for synthesis of liquid synthetic crude. Conversion of syngas to liquid synthetic crude, using a biomass-based carbon source, expands the application of renewable energy beyond the grid to include transportation fuels. It can also contribute to grid stability associated with non-dispatchable power generation. The use of supplemental hydrogen from HTSE enables greater than 90% utilization of the biomass carbon content which is about 2.5 times higher than carbon utilization associated with traditional cellulosic ethanol production. If the electrical power source needed for HTSE is based on nuclear or renewable energy, the process is carbon neutral. INL has demonstrated improved biomass processing prior to gasification. Recyclable biomass in the form of crop residue or energy crops would serve as the feedstock for this process. A process model of syngas production using high temperature electrolysis and biomass gasification is presented. Process heat from the biomass gasifier is used to heat steam for the hydrogen production via the high temperature steam electrolysis process. Oxygen produced form the electrolysis process is used to control the oxidation rate in the oxygen-blown biomass gasifier.

09 BIOMASS FUELS↗

Implementing Concurrent Non-Event Transitionsin CMS

Available on CMS information serverCMS CR -2018/277The Compact Muon Solenoid ExperimentMailing address: CMS CERN, CH-1211 GENEVA 23, SwitzerlandConference Report15 October 2018 (v2, 21 November 2018)Implementing Concurrent Non-Event Transitionsin CMSChristopher Jones for the CMS CollaborationAbstractSince the beginning of the LHC Run 2 in 2016 the CMS data processing framework, CMSSW, hasbeen running with multiple threads during production of data and simulation via the use of IntelsThread Building Blocks (TBB) library. The TBB library utilizes tasks as concurrent units of work.CMS used these tasks to allow both concurrent processing of events as well as concurrent running ofmodules processing the same event. This design has served CMS well and has allowed jobs to utilizeless memory per core as well as reduce the number of jobs that must be tracked by CMSs worflowmanagement system. As CMS has begun to utilize greater number of threads in a job, the effect ofserialization points in the framework has decreased jobs CPU efficiency. One major serialization pointoccurs when the framework processes a non-Event transition. These transitions occur when a new Runor LuminosityBlock is to be processed. In this talk we will discuss how the different transitions definethe processing model for CMSSW and how we were able to successfully allow concurrent process-ing of those transitions using TBB via task queues. We will also show CPU efficiency comparisonsbetween the same work being done with and without the additional concurrency.

Jones, Christopher↗

THE PRODUCTION OF SYNGAS VIA HIGH TEMPERATURE ELECTROLYSIS AND BIO-MASS GASIFICATION

A process model of syngas production using high temperature electrolysis and biomass gasification is presented. Process heat from the biomass gasifier is used to improve the hydrogen production efficiency of the steam electrolysis process. Hydrogen from electrolysis allows a high utilization of the biomass carbon for syngas production. Based on the gasifier temperature, 94% to 95% of the carbon in the biomass becomes carbon monoxide in the syngas (carbon dioxide and hydrogen). Assuming the thermal efficiency of the power cycle for electricity generation is 50%, (as expected from GEN IV nuclear reactors), the syngas production efficiency ranges from 70% to 73% as the gasifier temperature decreases from 1900 K to 1500 K.

08 HYDROGEN↗