Search NASA⌕ Search

SEARCH · Search NASA

Results for “quantum dot”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Phonon bottleneck in GaAs/Al{sub x}Ga{sub 1−x}As quantum dots

We report low-temperature photoluminescence measurements on highly-uniform GaAs/Al{sub x}Ga{sub 1−x}As quantum dots grown by droplet epitaxy. Recombination between confined electrons and holes bound to carbon acceptors in the dots allow us to determine the energies of the confined states in the system, as confirmed by effective mass calculations. The presence of acceptor-bound holes in the quantum dots gives rise to a striking observation of the phonon-bottleneck effect.

36 MATERIALS SCIENCE↗

Development of a Quantum Dot, 0.6 eV InGaAs Thermophotovoltaic (TPV) Converter

Thermophotovoltaic (TPV) power conversion has to date demonstrated conversion efficiencies exceeding 20% when coupled to a heat source. Current III-V semiconductor TPV technology makes use of planar devices with bandgaps tailored to the heat source. The efficiency can be improved further by increasing the collection efficiency through the incorporation of InAs quantum dots. The use of these dots can provide sub-gap absorption and thus improve the cell short circuit current without the normal increase in dark current associated with lowering the bandgap. We have developed self-assembled InAs quantum dots using the Stranski-Krastanov growth mode on 0.74 eV In0.53GaAs lattice-matched to InP and also on lattice-mismatched 0.6 eV In0.69GaAs grown on InP through the use of a compositionally graded InPAsx buffer structure, by metalorganic vapor phase epitaxy (MOVPE). Atomic force microscopy (AFM) measurements showed that the most reproducible dot pattern was obtained with 5 monolayers of InAs grown at 450 C. The lattice mismatch between InAs and In0.69GaAs is only 2.1%, compared to 3.2% between InAs and In0.53GaAs. The smaller mismatch results in lower strain, making dot formation somewhat more complicated, resulting in quantum dashes, rather than well defined quantum dots in the lattice-mismatched case. We have fabricated 0.6 eV InGaAs planer TPV cells with and without the quantum dashes

Forbes, David↗

Electronic and dielectric properties of vacancy clusters as quantum dot in silicane

First principal study of electronic and dielectric properties of a silicane nanostructure containing cluster of vacancies as quantum dot (QD) has been investigated within density functional theory (DFT). Electronic band structure and corresponding density of states show the decrease in band gap with increasing size of quantum dot. A band gap of 0.38 eV has been achieved for silicane containing 3QD. Electron energy loss spectra (EEL) function shows additional plasmonic features for QD containing silicane in visible region, which may have potential applications in optoelectronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Coherent all-optical switching by resonant quantum-dot distributions in photonic band-gap waveguides

We study the detailed propagative characteristics of optical pulses in photonic band-gap (PBG) waveguides, coupled near resonantly to inhomogeneously broadened distributions of quantum dots. The line centers of the quantum-dot (QD) distributions are placed near a sharp discontinuity in the local electromagnetic density of states. Using finite-difference time-domain (FDTD) simulations of optical pulse dynamics and independent QD susceptibilities associated with resonance fluorescence, we demonstrate subpicosecond switching from pulse absorption to pulse amplification using steady-state optical holding and gate fields with power levels on the order of 1 milliwatt. In the case of collective response of QDs within the periodic dielectric microstructure, the gate power level is reduced to 200 microwatt for room temperature operation. In principle, this enables 200 Gbits per second optical information processing at wavelengths near 1.5 microns in various wavelength channels. The allowed pulse bandwidth in a given waveguide channel exceeds 0.5 THz allowing switching of subpicosecond laser pulses without pulse distortion. The switching contrast from absorption to gain is governed by the QD oscillator strength and dipole dephasing time scale. We consider dephasing time scales ranging from nanoseconds (low-temperature operation) to one picosecond (room-temperature operation). This all-optical transistor action is based on simple Markovian models of single-dot and collective-dot inversion and switching by coherent resonant pumping near the photon density of states discontinuity. The structured electromagnetic vacuum is provided by two-mode waveguide architectures in which one waveguide mode has a cutoff that occurs, with very large Purcell factor, near the QDs resonance, while the other waveguide mode exhibits nearly linear dispersion for fast optical propagation and modulation. Unlike optical switching based on Kerr nonlinearities in an optical cavity resonator, switching power levels and switching speeds for our QD device are not inversely proportional to cavity quality factors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Laplace-Transform Deep-Level Spectroscopy Characterization of the Intrinsic and Deep-Level States in Self-Assembled InAs Quantum-Dot Structures

The electron emission from the intrinsic and deep-level states in self-assembled InAs/GaAs quantum-dot structures is probed using the Laplace-transform deep-level transient spectroscopy. The technique shows sufficient resolution to resolve electron emission from the singly and doubly occupied QD s states. By applying an appropriate set of voltage pulses across the Schottky-diode structure, we identify the electron distribution profile in the quantum-dot intrinsic states.

36 MATERIALS SCIENCE↗

Carrier Dynamics in Quantum Dot Structures with Different Interdot Spacings

The time of carrier transfer into a dot decreases with increasing dot density as well as with photoexcited carrier denstiy and temperature. It is suggested that potential barriers at the barrier, wetting layer and quantum dot interfaces hinder the carrier capture in low-density quantum dot structures.

quantum↗

Comparative toxicity assessment of novel Si quantum dots and their traditional Cd-based counterparts using bacteria models Shewanella oneidensis and Bacillus subtilis

Quantum dots are crystalline semiconductor nanoparticles with unique optical properties due to quantum confinement effects. They have several advantages compared to traditional organic fluorescent dyes, such as high fluorescent brightness, photostability, and tunable emission wavelengths, dependent upon particle size. Their unique optical properties have led to an increased use in a variety of devices, including diode lasers and television displays, as well as in biomedical research. The most commonly used quantum dots (QDs) are made of cadmium selenide (CdSe) and have cadmium selenide core with zinc sulfide shell (CdSe/ZnS), containing inherently toxic cadmium. This work focuses on comparison of the toxic effects of conventional CdSe and CdSe/ZnS QDs and silicon QDs, which are emerging as a potentially benign alternative, using bacteria as model organisms. The bacteria models used for our studies are Shewanella oneidensis MR-1, a Gram-negative bacterium, and Bacillus subtilis SB 491, a Gram-positive bacterium. Furthermore, this research assesses changes in cell viability, respiration pattern, and cell membrane integrity in the presence of the nanoparticles using colony counting, respirometry and membrane integrity assays, respectively. The association of the QDs with bacterial cell membranes was investigated using transmission electron microscopy (TEM). Results indicate that the silicon QDs are benign to the bacteria considered, and they do not associate with the cell membranes. The CdSe cores exhibit significant toxicity to the bacterial cells, whereas the CdSe/ZnS QDs are comparatively less toxic.

54 ENVIRONMENTAL SCIENCES↗

Spin noise spectroscopy of quantum dot molecules

We discuss advantages and limitations of the spin noise spectroscopy for characterization of interacting quantum dot systems on specific examples of individual singly and doubly charged quantum dot molecules (QDMs). It is shown that all the relevant parameters of the QDMs including tunneling amplitudes with spin-conserving and spin-non-conserving interactions, decoherence rates, Coulomb repulsions, anisotropic g-factors and the distance between the dots can be determined by measuring properties of the spin noise power spectrum.

36 MATERIALS SCIENCE↗

Elliptical quantum dots as on-demand single photons sources with deterministic polarization states

In quantum information, control of the single photon's polarization is essential. Here, we demonstrate single photon generation in a pre-programmed and deterministic polarization state, on a chip-scale platform, utilizing site-controlled elliptical quantum dots (QDs) synthesized by a top-down approach. The polarization from the QD emission is found to be linear with a high degree of linear polarization and parallel to the long axis of the ellipse. Single photon emission with orthogonal polarizations is achieved, and the dependence of the degree of linear polarization on the QD geometry is analyzed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Metamorphic approach to single quantum dot emission at 1.55 {mu}m on GaAs substrate

We report on the fabrication and the characterization of InAs quantum dots (QDs) embedded in an indium rich In{sub 0.42}Ga{sub 0.58}As metamorphic matrix grown on a GaAs substrate. Growth conditions were chosen so as to minimize the number of threading dislocations and other defects produced during the plastic relaxation. Sharp and bright lines, originating from the emission of a few isolated single quantum dots, were observed in microphotoluminescence around 1.55 {mu}m at 5 K. They exhibit, in particular, a characteristic exciton/biexciton behavior. These QDs could offer an interesting alternative to other approaches as InAs/InP QDs for the realization of single photon emitters at telecom wavelengths.

36 MATERIALS SCIENCE↗

Separability and dynamical symmetry of Quantum Dots

The separability and Runge–Lenz-type dynamical symmetry of the internal dynamics of certain two-electron Quantum Dots, found by Simonović et al. (2003), are traced back to that of the perturbed Kepler problem. A large class of axially symmetric perturbing potentials which allow for separation in parabolic coordinates can easily be found. Apart from the 2:1 anisotropic harmonic trapping potential considered in Simonović and Nazmitdinov (2013), they include a constant electric field parallel to the magnetic field (Stark effect), the ring-shaped Hartmann potential, etc. The harmonic case is studied in detail. -- Highlights: • The separability of Quantum Dots is derived from that of the perturbed Kepler problem. • Harmonic perturbation with 2:1 anisotropy is separable in parabolic coordinates. • The system has a conserved Runge–Lenz type quantity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Temperature-dependent measurement of Auger recombination in In{sub 0.40}Ga{sub 0.60}N/GaN red-emitting (λ = 630 nm) quantum dots

We have derived the Auger recombination coefficients, as a function of temperature, for In{sub 0.4}Ga{sub 0.6}N/GaN self-organized quantum dots from large-signal modulation measurements made on lasers in which the quantum dots form the gain media. The value of C{sub a} = 1.3 ±0.2 × 10{sup −31} cm{sup 6} s{sup −1} at room temperature and the coefficient decreases with increase of temperature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Photocatalytic Conversion of Nitrobenzene to Aniline through Sequential Proton-Coupled One-Electron Transfers from a Cadmium Sulfide Quantum Dot

This paper describes the use of cadmium sulfide quantum dots (CdS QDs) as visible-light photocatalysts for the reduction of nitrobenzene to aniline through six sequential photoinduced, proton-coupled electron transfers. At pH 3.6–4.3, the internal quantum yield of photons-to-reducing electrons is 37.1% over 54 h of illumination, with no apparent decrease in catalyst activity. Monitoring of the QD exciton by transient absorption reveals that, for each step in the catalytic cycle, the sacrificial reductant, 3-mercaptopropionic acid, scavenges the excitonic hole in ~5 ps to form QD •– ; electron transfer to nitrobenzene or the intermediates nitrosobenzene and phenylhydroxylamine then occurs on the nanosecond time scale. The rate constants for the single-electron transfer reactions are correlated with the driving forces for the corresponding proton-coupled electron transfers. This result suggests, but does not prove, that electron transfer, not proton transfer, is rate-limiting for these reactions. Furthermore, nuclear magnetic resonance analysis of the QD–molecule systems shows that the photoproduct aniline, left unprotonated, serves as a poison for the QD catalyst by adsorbing to its surface. Performing the reaction at an acidic pH not only encourages aniline to desorb but also increases the probability of protonated intermediates; the latter effect probably ensures that recruitment of protons is not rate-limiting.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Temperature and current dependences of the lasing spectrum's width of quantum dot lasers

Dependences of the lasing spectrum's width of lasers based on arrays of self-organized InAs/InGaAs quantum dots on the temperature and output power have been experimentally studied. A theoretical analysis and simulation of the experimental results have been performed and the possibility of an adequate analytical description of the power and temperature dependences of the lasing line width in terms of the model developed has been demonstrated. It is shown that the main cause of the broadening of the lasing spectrum at low temperatures is the gain saturation in quantum dots as a result of the increase in the average carrier's escape and capture times.

36 MATERIALS SCIENCE↗

Growth and optical properties of CdTe quantum dots in ZnTe nanowires

We report on the formation of optically active CdTe quantum dots in ZnTe nanowires. The CdTe/ZnTe nanostructures have been grown by a gold nanocatalyst assisted molecular beam epitaxy in a vapor-liquid solid growth process. The presence of CdTe insertions in ZnTe nanowire results in the appearance of a strong photoluminescence band in the 2.0 eV-2.25 eV energy range. Spatially resolved photoluminescence measurements reveal that this broad emission consists of several sharp lines with the spectral width of about 2 meV. The large degree of linear polarization of these individual emission lines confirms their nanowire origin, whereas the zero-dimensional confinement is proved by photon correlation spectroscopy.

36 MATERIALS SCIENCE↗

A comparison of electrostatic simulations to measurements of quantum dot structures.

We have compared simulations using solutions of Poisson's equation to detailed capacitance measurements on a double quantum dot structure. We tabulate the results and show which cases show good agreement and which do not. The capacitance values are also compared to those calculated by a solution of Laplace's equation. Electron density is plotted and discussed. In order to understand relevant potential barriers we compare simulations at 50 Kelvin to simulations at 15 Kelvin. We show that the charge density does not differ greatly, but that the conduction band potential does. However, a method of estimating the potential at 0 Kelvin based on the charge distribution at 50 Kelvin is shown to be close to the potential at 15 Kelvin. This method was used to estimate potential barriers at 0 Kelvin in two quantum dot structures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Theoretical simulation of carrier capture and relaxation rates in quantum-dot semiconductor optical amplifiers

Based on Auger scattering mechanism, carrier-carrier scattering dynamics between the two-dimensional carrier reservoir (also called wetting layer, i.e., WL) and the confined quantum dot ground and first excited state in quantum-dot semiconductor optical amplifiers (QD-SOAs) are investigated theoretically in this paper. The scattering rates for independent electron and hole densities are calculated. The results show an ultra-fast carrier capture (relaxation) rate up to 1 ps{sup −1}, and there is a complex dependence of the Coulomb scattering rates on the WL electron and hole densities. In addition, due to the different effective mass and the level distribution, the scattering rates for electron and hole are very different. Finally, in order to provide a direction to control (increase or decrease) the input current in realistic QD-SOA systems, a simple method is proposed to determine the trends of the carrier recovery rates with the WL carrier densities in the vicinity of the steady-state.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

InGaAs/GaAs (110) quantum dot formation via step meandering

InGaAs (110) semiconductor quantum dots (QDs) offer very promising prospects as a material base for a new generation of high-speed spintronic devices, such as single electron transistors for quantum computing. However, the spontaneous formation of InGaAs QDs is prevented by two-dimensional (2D) layer-by-layer growth on singular GaAs (110) substrates. In this work we have studied, by using atomic force microscopy and photoluminescence spectroscopy (PL), the growth of InGaAs/GaAs QDs on GaAs (110) stepped substrates by molecular beam epitaxy (MBE), and the modification of the adatom incorporation kinetics to surface steps in the presence of chemisorbed atomic hydrogen. The as-grown QDs exhibit lateral dimensions below 100 nm and emission peaks in the 1.35-1.37 eV range. It has been found that a step meandering instability derived from the preferential attachment of In adatoms to [110]-step edges relative to [11n]-type steps plays a key role in the destabilization of 2D growth that leads to 3D mound formation on both conventional and H-terminated vicinal substrates. In the latter case, the driving force for 3D growth via step meandering is enhanced by H-induced upward mass transport in addition to the lower energy cost associated with island formation on H-terminated substrates, which results in a high density array of InGaAs/GaAs dots selectively nucleated on the terrace apices with reduced lateral dimensions and improved PL efficiency relative to those of conventional MBE-grown samples.

36 MATERIALS SCIENCE↗