Search NASA⌕ Search

SEARCH · Search NASA

Results for “sample collections”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Metabolomics reveals metabolic biomarkers of Crohn's disease

The causes and etiology of Crohn's disease (CD) are currently unknown although both host genetics and environmental factors play a role. Here we used non-targeted metabolic profiling to determine the contribution of metabolites produced by the gut microbiota towards disease status of the host. Ion Cyclotron Resonance Fourier Transform Mass Spectrometry (ICR-FT/MS) was used to discern the masses of thousands of metabolites in fecal samples collected from 17 identical twin pairs, including healthy individuals and those with CD. Pathways with differentiating metabolites included those involved in the metabolism and or synthesis of amino acids, fatty acids, bile acids and arachidonic acid. Several metabolites were positively or negatively correlated to the disease phenotype and to specific microbes previously characterized in the same samples. Our data reveal novel differentiating metabolites for CD that may provide diagnostic biomarkers and/or monitoring tools as well as insight into potential targets for disease therapy and prevention.

54 ENVIRONMENTAL SCIENCES↗

Acid rain at Kennedy Space Center, Florida - Recent observations

During the period July, 1977 to September, 1979, rainfall was collected in the vicinity of the Kennedy Space Center and subjected to appropriate chemical analysis for purposes of characterization of general composition and acidity. Results obtained form the basis for future comparisons, should significant alteration of the chemical composition of rain occur during the space shuttle era. Acidity extremes calculated on a monthly basis from event samples collected from five sites within a 200 sq km area varied from pH 5.1 in November, 1977, and April, 1978 to pH 4.3 in July, 1978 and July, 1979. Weighted average pH for the entire period was 4.55. Acidity was due to the presence of sulfuric and nitric acids. The mole ratio of excess SO4(-2):NO3(-) was typically greater than one. Monthly weighted average Cl(-) concentrations ranged from 20-240 micromoles/liter. The Cl(-):Na(+) ratio was slightly lower than that present in sea water.

Madsen, B. C.↗

The Planetary Materials Database

NASA provides funds for a variety of research programs whose principal focus is to collect and analyze terrestrial analog materials. These data are used to (1) understand and interpret planetary geology; (2) identify and characterize habitable environments and pre-biotic/biotic processes; (3) interpret returned data from present and past missions; and (4) evaluate future mission and instrument concepts prior to selection for flight. Data management plans are now required for these programs, but the collected data are still not generally available to the community. There is also little possibility to re-analyze the collected materials by other techniques, since there is no requirement to archive collected samples. The Planetary Materials Database (PMD) is a central, high-quality, long-term data repository, which aims to promote the field of astrobiology and increase scientific returns from NASA funded research by enabling data sharing, collaboration and exposure of non-NASA scientists to NASA research initiatives and missions. The PMD is a linked collection of databases developed using the Open Data Repository (ODR) system. The PMD will include detailed descriptions of terrestrial analog planetary materials as well as data from the instruments used in their analysis. The goal is to provide example patterns/spectra/analyses, etc. and background information suitable for use by the Space Science community. An early example showing the utility of these databases (although not in the ODR format) is the RRUFF mineral database. RRUFF, comprising 4,000+ pure mineral standards, is the most popular and widely used dataset of minerals and receives more than 180,000 queries per week from geologists and mineralogists worldwide. The PMD will be patterned after the CheMin database [3], a resource that contains all of the data collected by the MSL CheMin XRD instrument on Mars. Raw and processed CheMin data can be viewed, downloaded, reprocessed and reanalyzed using cloud-based “applications” linked to the data.

Blake, David↗

Final Report: Laser-Based Optical Trap for Remote Sampling of Interplanetary and Atmospheric Particulate Matter

Applicability to Early Stage Innovation NIAC Cutting edge and innovative technologies are needed to achieve the demanding requirements for NASA origin missions that require sample collection as laid out in the NRC Decadal Survey. This proposal focused on fully understanding the state of remote laser optical trapping techniques for capturing particles and returning them to a target site. In future missions, a laser-based optical trapping system could be deployed on a lander that would then target particles in the lower atmosphere and deliver them to the main instrument for analysis, providing remote access to otherwise inaccessible samples. Alternatively, for a planetary mission the laser could combine ablation and trapping capabilities on targets typically too far away or too hard for traditional drilling sampling systems. For an interstellar mission, a remote laser system could gather particles continuously at a safe distance; this would avoid the necessity of having a spacecraft fly through a target cloud such as a comet tail. If properly designed and implemented, a laser-based optical trapping system could fundamentally change the way scientists designand implement NASA missions that require mass spectroscopy and particle collection.

Laser↗

A Comprehensive GC–MS Sub-Microscale Assay for Fatty Acids and its Applications

Fatty acid analysis is essential to a broad range of applications including those associated with the nascent algal biofuel and algal bioproduct industries. Current fatty acid profiling methods require lengthy, sequential extraction and transesterification steps necessitating significant quantities of analyte. We report the development of a rapid, microscale, single-step, in situ protocol for GC–MS lipid analysis that requires only 250 lg dry mass per sample. We furthermore demonstrate the broad applications of this technique by profiling the fatty acids of several algal species, small aquatic organisms, insects and terrestrial plant material. When combined with fluorescent techniques utilizing the BODIPY dye family and flow cytometry, this micro-assay serves as a powerful tool for analyzing fatty acids in laboratory and field collected samples, for highthroughput screening, and for crop assessment. Additionally, the high sensitivity of the technique allows for population analyses across a wide variety of taxa.

09 BIOMASS FUELS↗

Data Report: UT-GOM2-1 Lithostratigraphic Core Description Logs at Site GC 955, Holes H002 and H005

Lithostratigraphic core description provides a record of the stratigraphic variation in composition, texture, and sedimentary structure preserved in marine sediment cores. Here we present graphical lithostratigraphic core description logs for pressure cores collected during the 2017 UT GOM2-1 Expedition. The cores summarized here were those that were not retrieved under pressure, but nevertheless recovered some sufficient, intact strata that represent the host lithology across the Green Canyon (GC) 955 gas hydrate reservoir. Our results here represent visual core descriptions and include split core photos and location data for samples collected during core description.

03 NATURAL GAS↗

Strain-resolved microbial community proteomics reveals simultaneous aerobic and anaerobic function during gastrointestinal tract colonization of a preterm infant

While there has been growing interest in the gut microbiome in recent years, it remains unclear whether closely related species and strains have similar or distinct functional roles and if organisms capable of both aerobic and anaerobic growth do so simultaneously. To investigate these questions, we implemented a high-throughput mass spectrometry-based proteomics approach to identify proteins in fecal samples collected on days of life 13 21 from an infant born at 28 weeks gestation. No prior studies have coupled strain-resolved community metagenomics to proteomics for such a purpose. Sequences were manually curated to resolve the genomes of two strains of Citrobacter that were present during the later stage of colonization. Proteome extracts from fecal samples were processed via a nano-2D-LC-MS/MS and peptides were identified based on information predicted from the genome sequences for the dominant organisms, Serratia and the two Citrobacter strains. These organisms are facultative anaerobes, and proteomic information indicates the utilization of both aerobic and anaerobic metabolisms throughout the time series. This may indicate growth in distinct niches within the gastrointestinal tract. We uncovered differences in the physiology of coexisting Citrobacter strains, including differences in motility and chemotaxis functions. Additionally, for both Citrobacter strains we resolved a community-essential role in vitamin metabolism and a predominant role in propionate production. Finally, in this case study we detected differences between genome abundance and activity levels for the dominant populations. This underlines the value in layering proteomic information over genetic potential.

60 APPLIED LIFE SCIENCES↗

ISS Potable Water Quality for Expeditions 26 through 30

International Space Station (ISS) Expeditions 26-30 spanned a 16-month period beginning in November of 2010 wherein the final 3 flights of the Space Shuttle program finished ISS construction and delivered supplies to support the post-shuttle era of station operations. Expedition crews relied on several sources of potable water during this period, including water recovered from urine distillate and humidity condensate by the U.S. water processor, water regenerated from humidity condensate by the Russian water recovery system, and Russian ground-supplied potable water. Potable water samples collected during Expeditions 26-30 were returned on Shuttle flights STS-133 (ULF5), STS-134 (ULF6), and STS-135 (ULF7), as well as Soyuz flights 24-27. The chemical quality of the ISS potable water supplies continued to be verified by the Johnson Space Center s Water and Food Analytical Laboratory (WAFAL) via analyses of returned water samples. This paper presents the chemical analysis results for water samples returned from Expeditions 26-30 and discusses their compliance with ISS potable water standards. The presence or absence of dimethylsilanediol (DMSD) is specifically addressed, since DMSD was identified as the primary cause of the temporary rise and fall in total organic carbon of the U.S. product water that occurred in the summer of 2010.

Straub, John E., II↗

Dividing the Concentrator Target From the Genesis Mission

The Genesis spacecraft, launched in 2001, traveled to a Lagrangian point between the Earth and Sun to collect particles from the solar wind and return them to Earth. However, during the return of the spacecraft in 2004, the parachute failed to open during descent, and the Genesis spacecraft crashed into the Utah desert. Many of the solar wind collectors were broken into smaller pieces, and the field team rapidly collected the capsule and collector pieces for later assessment. On each of the next few days, the team discovered that various collectors had survived intact, including three of four concentrator targets. Within a month, the team had imaged more than 10,000 fragments and packed them for transport to the Astromaterials Acquisition and Curation Office within the ARES Directorate at JSC. Currently, the Genesis samples are curated along with the other extraterrestrial sample collections within ARES. Although they were broken and dirty, the Genesis solar wind collectors still offered the science community the opportunity to better understand our Sun and the solar system as a whole. One of the more highly prized concentrator collectors survived the crash almost completely intact. The Genesis Concentrator was designed to concentrate the solar wind by a factor of at least 20 so that solar oxygen and nitrogen isotopes could be measured. One of these materials was the Diamond-on-Silicon (DoS) concentrator target. Unfortunately, the DoS concentrator broke on impact. Nevertheless, the scientific value of the DoS concentrator target was high. The Genesis Allocation Committee received a request for approximately 1 cm(sup 2) of the DoS specimen taken near the focal point of the concentrator for the analysis of solar wind nitrogen isotopes. The largest fragment, Genesis sample 60000, was designated for this allocation and needed to be precisely cut. The requirement was to subdivide the designated sample in a manner that prevented contamination of the sample and minimized the risk of losing or breaking the precious requested sample fragment. The Genesis curator determined that the use of laser scribing techniques to "cut" a precise line and subsequently cleave the sample (in a controlled break of the sample along that line) was the best method for accomplishing the sample subdivision. However, there were risks, including excess heating of the sample, that could cause some of the implanted solar wind to be lost via thermal diffusion. Accidentally breaking the sample during the handling and cleaving process was an additional risk. Early in fiscal year 2013, to address this delicate, complicated task, the ARES Directorate assembled its top scientists to develop a cutting plan that would ensure success when applied to the actual concentrator target wafer; i.e., to produce an approximately 1 cm(sup 2) piece from the requested area of the wafer. The team, subsequently referred to as the JSC Genesis Tiger Team, spent months researching and testing parameters and techniques related to scribing, cleaving, transporting, handling, and holding (i.e., mounting) the specimen. The investigation required considerable "thinking outside the box," and many, many trials using nonflight wafer analogs. After all preliminary testing, the following method was adopted as the final cutting plan. It was used in two final end-to-end practice runs before being used on the actual flight target wafer. The wafer was oriented on the laser cutting stage with the 100 and 010 directions of the wafer parallel to the corresponding X and Y directions of the cutting stage. The laser was programed to scribe 31 lines of the appropriate length along the Y stage direction. The programed scribe lines were separated by 5 micron in the X direction. The laser parameters were set as follows: (1) The laser power was 0.5 watts; (2) each line consisted of 50 passes, with the Z position being advanced 5 micron per pass; and (3) 30 s would elapse before the next line was scribed to allow for wafer cool down from any possible heating via the laser. The ablated material that "stuck" in the "scribe-cut" was removed from the "cut" using an ultrasonic micro-tool. After all the ablated silicon was removed from the wafer, the wafer was repositioned in exactly the same orientation on the laser stage. The laser was focused using the bottom of the wafer channel, and the 31-line scribing pattern described above was reprogrammed using the Z position of the groove bottom as the starting Z value instead of the top wafer surface, which was used previously. Upon completion of the second set of scribes, the ultrasonic micro-tool was again used to clean out the cut. The wafer was remounted on the stage in exactly the same orientation as before. The laser was again focused on the bottom of the groove. This time, however, the laser was.programed to scribe only one line down the exact center of the channel. The final scribe line consisted of 100 passes with a Z advance of 5 micron per pass and with the laser power set at 0.5 watts. As mentioned above, the final cutting plan was practiced in two end-to-end trials using non-flight, triangular-shaped silicon wafers similar in size and orientation to the actual DOS 60000 target sample. The actual scribing of the triangular-shaped wafers required scribing two lines and cleaving (i.e. scribe-cleave, then scribe-cleave) to obtain the piece requested for allocation. Early in December 2012, after many months of experiments and practicing and perfecting the techniques and procedures, the team successfully subdivided the Genesis DoS 60000 target sample, one of the most scientifically important samples from the Genesis mission (figure 2). On December 17, 2012, the allocated piece of concentrator target sample was delivered to the requesting principal investigator.The cutting plan developed for the subdivision of this sample will be used as the model for subdividing future requested Genesis flight wafers (appropriately modified for different wafer types).

Lauer, H. V., Jr.↗

How Rich is Rich? Placing Constraints on the Abundance of Spinel in the Pink Spinel Anorthosite Lithology on the Moon Through Space Weathering

previously unknown lunar rock was recently recognized in the Moon Mineralogy Mapper (M(sup 3)) visible to near-infrared (VNIR) reflectance spectra. The rock type is rich in Mg-Al spinel (approximately 30%) and plagioclase and contains less than 5% mafic silicate minerals (olivine and pyroxene). The identification of this pink spinel anorthosite (PSA) at the Moscoviense basin has sparked new interest in lunar spinel. Pieters et al. suggested that these PSA deposits might be an important component of the lunar crust. However, Mg-Al spinel is rare in the Apollo and meteorite sample collections (only up to a few wt%), and occurs mostly in troctolites and troctolitic cataclastites. In this study, we are conducting a series of experiments (petrologic and space weathering) to investigate whether deposits of spinel identified by remote sensing are in high concentration (e.g. 30%) or whether the concentrations of spinel in these deposits are more like lunar samples, which contain only a few wt%. To examine the possibility of an impact-melt origin for PSA, conducted 1-bar crystallization experiments on rock compositions similar to pink spinel troctolite 65785. The VNIR spectral reflectance analyses of the low-temperature experiments yield absorption features similar to those of the PSA lithology detected at Moscoviense Basin. The experimental run products at these temperatures contain approximately 5 wt% spinel, which suggests that the spinel-rich deposits detected by M(sup 3) might not be as spinel-rich as previously thought. However, the effect of space weathering on spinel is unknown and could significantly alter its spectral properties including potential weakening of its diagnostic 2-micrometers absorption feature. Thus, weathered lunar rocks could contain more spinel than a comparison with the unweathered experimental charges would suggest. In this study, we have initiated space weathering experiments on 1) pure pink spinel, 2) spinel-anorthite mixtures, and 3) the low temperature experimental run products from Gross et al. in order to evaluate the influence of space weathering on the absorption strength of spinel. The results can be used to place constraints on the spinel abundance in the PSA lithology and can be used as ground truth for further VNIR spectral analyzes of lunar lithologies.

Gross, J.↗

Long-term Accumulation, Depth Distribution, and Speciation of Silver Nanoparticles in Biosolids-Amended Soils

Biosolids, when applied to soil, can be a source of metals and metal nanoparticles. One of the metals that forms nanoparticles is silver (Ag), which is commonly used in elemental (Ag(0)) form as an engineered nanomaterial in industrial or consumer products. The objective of this study was to quantify and characterize the accumulation and transport of Ag in a natural soil that has received agronomically-recommended rates of biosolids as fertilizer for the past 23 years (1994{2017). Total Ag concentrations were measured in biosolids and soil samples collected from 0 to 10 cm between 1996 and 2017. In addition, the depth distribution of Ag in the soil down to 60-cm depth was measured in 2017. Electron microscopy, in combination with X-ray spectroscopy, and X-ray absorption spectroscopy were used to identify the elemental association and oxidation state of the Ag in the samples. The Ag concentrations in the biosolids-amended soil increased steadily from 1996 until 2007, after which the concentrations leveled off at about 1.25 mg Ag kg-1 soil. This corresponded with a decrease of Ag concentrations in the biosolids over time. The majority of the Ag (82%) was confined to the top 10 cm of the soil, small amounts (14%) were detected in 10 to 20-cm depth, and trace amounts (4%) in 30 to 40-cm depth. The Ag in the biosolids and soil was identified as Ag-containing nanoparticles with a diameter of 10 to 12 nm. Ag was associated with S suggest that these 19 nanoparticles are Ag2S. This could be corroborated in biosolids with X-ray absorption spectroscopy (XANES); however, the Ag concentrations in the soil samples were too low to allow identification with XANES. Biosolids, when applied at agronomic rates in dryland cropping systems, represent an economically viable source of crop nutrients. In our study, long-term application of biosolids did not increase the concentration of total Ag in soil above a maximum of 1.5 mg Ag kg-1, and the Ag is present in the sulfide form. This concentration is below ecotoxicity limits for Ag2S in soil.

Taylor, Stephen E.↗

An analysis of the composition and metal contamination of plastics from waste electrical and electronic equipment (WEEE)

The compositions of three WEEE plastic batches of different origin were investigated using infrared spectroscopy, and the metal content was determined with inductively coupled plasma. The composition analysis of the plastics was based mainly on 14 samples collected from a real waste stream, and showed that the major constituents were high impact polystyrene (42 wt%), acrylonitrile–butadiene–styrene copolymer (38 wt%) and polypropylene (10 wt%). Their respective standard deviations were 21.4%, 16.5% and 60.7%, indicating a considerable variation even within a single batch. The level of metal particle contamination was found to be low in all samples, whereas wood contamination and rubber contamination were found to be about 1 wt% each in most samples. In the metal content analysis, iron was detected at levels up to 700 ppm in the recyclable waste plastics fraction, which is of concern due to its potential to catalyse redox reactions during melt processing and thus accelerate the degradation of plastics during recycling. Toxic metals were found only at very low concentrations, with the exception of lead and cadmium which could be detected at 200 ppm and 70 ppm levels, respectively, but these values are below the current threshold limits of 1000 ppm and 100 ppm set by the Restriction of Hazardous Substances directive.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Soil emissivity and reflectance spectra measurements

We present an analysis of the laboratory reflectance and emissivity spectra of 11 soil samples collected on different field campaigns carried out over a diverse suite of test sites in Europe, North Africa, and South America from 2002 to 2008. Hemispherical reflectance spectra were measured from 2.0 to 14 {mu}m with a Fourier transform infrared spectrometer, and x-ray diffraction analysis (XRD) was used to determine the mineralogical phases of the soil samples. Emissivity spectra were obtained from the hemispherical reflectance measurements using Kirchhoff's law and compared with in situ radiance measurements obtained with a CIMEL Electronique CE312-2 thermal radiometer and converted to emissivity using the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) temperature and emissivity separation algorithm. The CIMEL has five narrow bands at approximately the same positions as the ASTER. Results show a root mean square error typically below 0.015 between laboratory emissivity measurements and emissivity measurements derived from the field radiometer.

54 ENVIRONMENTAL SCIENCES↗

A manned exobiology laboratory based on the Moon

Establishment of an exobiology laboratory on the Moon would provide a unique opportunity for exploration of extraterrestrial materials on a long-term, ongoing basis, for elucidation of exobiological processes and chemical evolution. A major function of the lunar exobiology laboratory would be to examine samples collected from other planets (e.g., Mars) for the presence of extant or extinct life. By establishing a laboratory on the Moon, preliminary analyses could be conducted away from Earth, thus establishing that extraterrestrial materials are benign before their return to Earth for more extensive investigations. The Moon-based exobiology laboratory would have three major components for study of samples returned from other planets: (1) the search for extant life - this component would focus on the detection and identification of life forms using biological, physical, and chemical methods; (2) the search for extinct life - this component would concentrate on identification of extinct life using micropaleontological physical and chemical means; and (3) the search and evidence of chemical evolution - this component would be devoted to the detection and identification of molecules revealing prebiotic chemical evolution.

Gehrke, Charles W.↗

SPRUCE Sphagnum Phytobiome Responses to Whole Ecosystem Warming and Elevated Atmospheric CO2 in July, 2017-2021

This dataset reports the carbon (C) and nitrogen (N) isotopic composition of Sphagnum moss tissue collected from the Spruce and Peatland Responses Under Changing Environments (SPRUCE) experimental site within the Marcell Experimental Forest in northern Minnesota, USA. Tissues were collected inside the SPRUCE experimental study plot, where air and peat warming are combined in whole-ecosystem warming treatments, from 2019-2021. Additionally, rates of nitrogen fixation and methane oxidation measured for Sphagnum from 2017, 2019, and 2021. Sphagnum tissue % water content was measured at all timepoints. This dataset was used to conduct analyses within Petro et al (2023). Sphagnum C and N concentrations and 13C and 15N isotopic natural abundance were determined for three replicate Sphagnum tissue samples collected from inside the SPRUCE enclosures in July 2019-2021. Elemental and isotope analyses were conducted at the University of Georgia – Center for Applied Isotope Studies (CAIS; https://cais.uga.edu/). Plant elemental analysis was performed by the micro-Dumas method, while isotopic natural abundance was measured by isotope ratio mass spectrometry. 13C natural abundance is expressed as the per mille (‰) deviation from the Pee Dee Belemnite standard (PDB) 13C:12C ratio (δ13C), while 15N natural abundance is expressed as the ‰ deviation from the N2 atmospheric 15N:14N ratio (δ15N). Rates of nitrogen fixation and methane oxidation were measured using serum bottle incubations performed with Sphagnum collected inside the SPRUCE enclosures in July 2017, 2019, and 2021. Rates were calculated according to the amount of 15N-N2 or 13C-CH4 (methane) incorporated into the Sphagnum tissue or incubation headspace over the 48-hour intion period. In 2017, incubations were performed in growth chambers set to the temperature of the experimental plots during Sphagnum sampling. In 2019 and 2021, the incubations were performed directly inside the experimental plots. The 13C and 15N isotopic natural abundance data and rate measurements presented in this dataset provide insight into the impacts of whole-ecosystem warming and elevated atmospheric carbon dioxide (CO2) on N and C cycling within the Sphagnum phytobiome. This dataset contains two data files in comma-separate values (*.csv) format. Additional metadata are provided: two data dictionaries and a file-level metadata file in comma-separate values (.csv) format and a user guide in PDF (*.pdf) format. Additional datasets on NH4-N availability, porewater concentrations of CH4 and CO2, and Sphagnum groundcover within the SPRUCE experimental plots are available. These are outlined in the Related Datasets section in the user guide.

delta 13 carbon↗

Possible Involvement of Permian Phosphoria Formation Oil as a Source of REE and Other Metals Associated with Complex U-V Mineralization in the Northern Bighorn Basin?

The origin of V, U, REE and other metals in the Permian Phosphoria Formation have been speculated and studied by numerous scientists. The exceptionally high concentrations of metals have been interpreted to reflect fundamental transitions from anoxic to oxic marine conditions. Much of the oil in the Bighorn Basin, is sourced by the Phosphoria Formation. Two of the top 10 producing oil fields in Wyoming are located approximately 50 km west of two abandoned U-V mining districts in the northern portion of the basin. These fields produce from basin margin anticlinal structures from Mississippian age reservoir rock. Samples collected from abandoned U-V mines and prospects hosted in Mississippian aged paleokarst in Montana and Wyoming have hydrocarbon residue present and contain anomalous high concentrations of many metals that are found in similar concentrations in the Phosphoria Formation. As, Hg, Mo, Pb, Tl, U, V and Zn, often metals of environmental concern occur in high concentrations in Phosphoria Formation samples and had values ranging from 30–1295 ppm As, 0.179–12.8 ppm Hg, 2–791 ppm Mo, <2–146 ppm Pb, 10–490 ppm Tl, 907–86,800 ppm U, 1240–18,900 ppm V, and 7–2230 ppm Zn, in mineralized samples from this study. The REE plus Y composition of Madison Limestone- and limestone breccia hosted-bitumen reflect similar patterns to both mineralized samples from this study and to U.S. Geological Survey rock samples from studies of the Phosphoria Formation. Geochemical, mineralogical and field data were used to investigate past theories for mineralization of these deposits to determine if U present in home wells and Hg content of fish from rivers on the proximal Crow Indian Reservation may have been derived from these deposits or related to their mode of mineralization.

58 GEOSCIENCES↗

Detectability of minerals on desert alluvial fans using reflectance spectra

The visible and near-infrared reflectance spectra of soil samples collected from desert alluvial and colluvial surfaces in the Cuprite mining district, Nevada, were analyzed. These surfaces are downslope from hydrothermally altered volcanic rocks that contain spectrally characteristic minerals such as alunite and kaolinite. Coarse fractions of the soils on the alluvial fans are mineralogically variable and express the upslope lithologies; fine fractions are remarkably similar mineralogically and spectrally in all samples because of dilution of local mineral components by regionally derived windblown dust. Theoretical models for spectral mixing and for particle-size effects were used to model the observed spectral variations. Diagnostic mineral absorption bands in the spectra of fan materials were enhanced by computationally removing the spectrum of the homogeneous fine-soil component. Results show that spectral mixing models are useful for analyzing data with high spectral resolution obtained by field and aircraft spectrometers.

Shipman, Hugh↗

Optical Characterization of Cryptoendolithic Chemical Biosignatures on Antarctic Sandstone Surfaces

We have used several non-destructive optical techniques to study the distribution of organic molecules on an Antarctic sandstone sample collected at Battleship Promontory. Cryptoendolithic microorganisms have been found to inhabit rocks in the dry valleys of Antarctica. These dry deserts are an Earth analog to Mars. Future Mars rovers may search for life in the rocks of Mars with similar instrumentation used in this study. Light microscopy was used to determine five distinct regions and to determine textures on the sample. Deep ultraviolet fluorescence spectroscopy was used to scan the rock for the presence of organic molecules. Organic molecules were present in three of the five regions but not in the crust. There were similarities between each region, but each region presented a unique signature. Raman spectroscopy identified the minerals present and also provided more definitive identifications of the organic molecules. X-ray diffraction was also used to definitively identify the minerals present and corroborate the Raman mineral results.

Harju, Ellen R.↗