Search NASA⌕ Search

SEARCH · Search NASA

Results for “shape”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Covariance Shaping Over Riemannian Manifolds for Massive MIMO Communication

Acquiring accurate instantaneous channel state information (CSI) is a challenging aspect of massive multi-input multi-output (MIMO) communication. Utilizing statistical information, such as channel covariance matrix, to design statistical beamforming vectors is robust when compared to instantaneous CSI. In this paper, we propose a novel MIMO covariance shaping scheme over Riemannian manifolds. It serves as an effective statistical beamforming solution to a number of close proximity user equipment (UE) that are undergoing substantial channel correlation. Proposed algorithm exploits the Hermitian positive definite nature of covariance matrices lying over Riemannian manifold. We introduce Wasserstein distance function as a Riemannian metric to measure distances between channel covariance matrices. Furthermore, K-means clustering technique is utilized to effectively identify the optimal shape of effective optimal covariance matrices. Our findings suggest that maximizing the geodesic distance between covariance matrices ultimately leads to a corresponding increase in the network throughput, as determined by the beamforming vector used to shape the covariance matrices. Simulation results validate that the proposed solution converges faster than Euclidean-based state-of-the-art, while maintaining the same computational complexity. Finally, the sum rate performance asymptotically achieves full capacity for two-UE case and more than 96% of the upper bound exhaustive search benchmark for multi-UE scenario.

42 ENGINEERING↗

Objective PDF-Shaping-Based Economic Dispatch for Power Systems with Intermittent Generation Sources via Simultaneous Mean and Variance Minimization

With the ever increased penetration of renewables in power grid, economic power dispatch faces a challenge in terms of min-imizing the generation cost which is increasingly affected by random factors and constraints subjected to random inputs. In this context, the cost functions are random for which the widely used mean value based minimization can only achieve limited profit gain. Indeed, as the probability density function (PDF) is a comprehensive measure of characteristics of any random varia-bles, the desired optimization should address the shaping of the PDF of the generation cost function rather just its mean value. Through a simple case study, this paper firstly reveals the long tail PDF shape of the cost function when the traditional mean-value based optimization is used. This is then followed by the de-velopment of a novel PDF-shaping-based method that optimizes both the mean and variance of the PDF of the cost function. It has been shown that the proposed approach can reshape the PDF of the generation cost function so as to make it as left and as narrow as possible, leading to a significant low risk for high generation cost. Simulation tests have been included to show the effectiveness of the proposed approach and encouraging results have been obtained.

intermittent generation sources, uncertainties, PD↗

The Influence of Topology Changes on Inter-area Oscillation Modes and Mode Shapes

The topology of a power grid network is a piece of critical information for power grid operations. Different power grid topologies can change grid characteristics, inter-area oscillation modes, mode shapes, and even the robustness of the power system. This paper presents some preliminary study results, based on an approved WECC operating case and a modified low damping WECC system, to show the impact of topology changes resulting from N-1 contingencies on power system modes and mode shapes. The results show that topology changes can have very different impact on modal properties in a power system: some result in unstable situation, while others can improve small signal stability. For the former, the studies show about 4.5% damping reduction, so 5% damping margin would be required to ensure the system can sustain the contingencies. For the latter, those topology changes could be used as a control method to improve small signal stability. Mode shapes normally do not change when there is an N-1 topology change. These observations suggest that the inclusion of topological information is useful for improving the accuracy and effectiveness of power system control schemes.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Dynamic Shaping of Grid Response of Multi-Machine Multi-Inverter Systems Through Grid-Forming IBRs

We consider the problem of controlling the frequency response of weakly-coupled multi-machine multi-inverter low-inertia power systems via grid-forming inverter-based resources (IBRs). In contrast to existing methods, our approach relies on dividing the larger system into multiple strongly-coupled subsystems, without ignoring either the underlying network or approximating the subsystem response as an aggregate harmonic mean model. Rather, through a structured clustering and recursive dynamic shaping approach, the frequency response of the overall system to load perturbations is shaped appropriately. We demonstrate the proposed approach for a three-node triangular configuration and a small-scale radial network. Furthermore, previous synchronization analysis for heterogeneous systems requires the machines to satisfy certain proportionality property. In our approach, the effective transfer functions for each cluster can be tuned by the IBRs to satisfy such property, enabling us to apply the shaping control to systems with a wider range of heterogeneous machines.

frequency-shaping control↗

Asymmetrical Magnet Shape Optimization Based on S-C Mapping for Torque Profile Mitigation in Unidirectional Application of SPMS Machine

Surface-mounted Permanent Magnet Synchronous (SPMS) machines are widely used in applications that require low torque ripple, reduced vibration and acoustic noise. For those applications of SPMSM in which only unidirectional operation is needed, asymmetric design optimization show to have significant advantages over symmetric designs. In this paper, an analytical method based on Schwarz -Christoffel mapping is presented for asymmetrical magnet shape optimization in SPMS machine. In this method, permanent magnet is divided into finite cells so that each cell can be assigned with either air (OFF) or magnet (ON). The Optimization problem is solved using Genetic Algorithms (GAs). In order to remove non-manufacturable shapes, the cluster of materials and cleaning method is used and applied into magnet cells. The analytical method can significantly reduce the computation time used by optimization process as compared with methods based on Finite Element Analysis (FEA). This method is applied to a 12-pole SPMS machine. Validation of the S-C mapping method and final results are carried out using 2D and 3D finite element analysis. Here, the results obtained demonstrate that asymmetrical magnet shape improves cogging torque and torque ripple performance of SPMS machine by a significant margin.

42 ENGINEERING↗

Full coverage shaped-hole film cooling in an accelerating boundary layer with high freestream turbulence

Full coverage shaped-hole film cooling and downstream heat transfer measurements have been acquired in the accelerating flows over a large cylindrical leading edge test surface. The shaped holes had an 8 deg lateral expansion angled at 30 deg to the surface with spanwise and streamwise spacings of 3 diameters. Measurements were conducted at four blowing ratios, two Reynolds numbers, and six well documented turbulence condi-tions. Film cooling measurements were acquired over a four to one range in blowing ratio at the lower Reynolds number and at the two lower blowing ratios for the higher Reynolds number. The film cooling measurements were acquired at a coolant to free-stream density ratio of approximately 1.04. The flows were subjected to a low turbulence (LT) condition (Tu = 0.7%), two levels of turbulence for a smaller sized grid (Tu = 3.5%and 7.9%), one turbulence level for a larger grid (8.1%), and two levels of turbulence generated using a mock aerocombustor (AC) (Tu = 9.3% and 13.7%). Turbulence level is shown to have a significant influence in mixing away film cooling coverage progressively as the flow develops in the streamwise direction. Effectiveness levels for the AC turbu-lence condition are reduced to as low as 20% of LT values by the furthest downstream region. The film cooling discharge is located close to the leading edge with very thin and accelerating upstream boundary layers. Film cooling data at the lower Reynolds number show that transitional flows have significantly improved effectiveness levels compared with turbulent flows. Downstream effectiveness levels are very similar to slot film cooling data taken at the same coolant flow rates over the same cylindrical test surface. However, slots perform significantly better in the near discharge region. These data are expected to be very useful in grounding computational predictions of full coverage shaped-hole film cooling with elevated turbulence levels and acceleration. Lastly, infrared (IR) measurements were performed for the two lowest turbulence levels to document the spanwise variation in film cooling effectiveness and heat transfer.

20 FOSSIL-FUELED POWER PLANTS↗

Narrow thermal hysteresis of NiTi shape memory alloy thin films with submicrometer thickness

NiTi shape memory alloy (SMA) thin films were fabricated using biased target ion beam deposition (BTIBD), which is a new technique for fabricating submicrometer-thick SMA thin films, and the capacity to exhibit shape memory behavior was investigated. The thermally induced shape memory effect (SME) was studied using the wafer curvature method to report the stress-temperature response. The films exhibited the SME in a temperature range above room temperature and a narrow thermal hysteresis with respect to previous reports. To confirm the underlying phase transformation, in situ x-ray diffraction was carried out in the corresponding phase transformation temperature range. The B2 to R-phase martensitic transformation occurs, and the R-phase transformation is stable with respect to the expected conversion to the B19′ martensite phase. The narrow hysteresis and stable R-phase are rationalized in terms of the unique properties of the BTIBD technique.

36 MATERIALS SCIENCE↗

Electron spin resonance of interacting spins in n-Ge: II. Change in the width and shape of lines

The effect of spin interaction on the width and shape of the electron spin resonance line in compensated and uncompensated n-Ge:As has been studied. It is shown that, in the case of a magnetic field oriented along the [100] axis, the width of the resonance line decreases irrespective of the degree of compensation as the critical concentration of the insulator-metal transition is approached, owing to enhancement of the exchange interaction of spins and to an increase in the spin relaxation time. When the magnetic field is directed along other axes, an additional line broadening appears in compensated samples. This broadening is determined by the influence exerted on the g factor by fluctuations of the internal electrostatic field via the stresses generated by these fluctuations. For well-conducting samples, in which the thickness of the skin layer becomes smaller than that of the sample, the line takes on an asymmetric (Dysonian) shape. In this case, the ratio between the wings of the derivative, characteristic of this line shape, is determined by the ratio between the rates of spin diffusion and spin relaxation.

36 MATERIALS SCIENCE↗

Dependence of the stimulated luminescence threshold in ZnO nanocrystals on their geometric shape

The effect of the shape and dimensions of zinc oxide nanocrystals on the spontaneous luminescence decay times and the thresholds of stimulated luminescence in the ultraviolet spectral region is studied. It is shown that the columnar nanocrystals with hexagonal faceting exhibit the lowest threshold power of optical excitation for the diameters of the nanocavities are 100-200 nm, comparable to the absorption length for the excitation light. Different mechanisms of lasing are established for nanocrystals shaped as prisms and pyramids with a hexagonal base. Variations in the decay times and lasing thresholds can be attributed to different local densities of photon states in regularly shaped nanocrystals.

36 MATERIALS SCIENCE↗

Effect of HfO{sub 2} Nanoparticles on the Shape and Parameters of Pseudoelastic Stress–Strain Curves of Cu–Al–Ni Alloy Single Crystals

The effect of hafnium dioxide (HfO{sub 2}) disperse nanoparticles on the shape and parameters of stress–strain curves for the compression of Cu–13.5 wt %Al–4.0 wt %Ni alloy single crystals with memory effect has been investigated. It is found that 30-nm nanoparticles with a volume fraction of 1% affect the shape of pseudoelastic stress–strain curves of an alloy crystal, namely, substantially elevate its (martensite) strain-hardening coefficient θ and deformation work and eliminate deforming stress drops associated with the existence of interfacial stresses under martensite transformation, but do not affect the hysteresis of pseudoelastic stress–strain curves and deformation of shape memory. Simulation of pseudoelastic stress–strain curves and analysis of results using the smeared martensite transformation have revealed that the increase in coefficient θ ~ ω{sup –1} and elimination of stress drops on pseudoelastic stress–strain curves are associated with a considerable (order-of-magnitude) decrease in martensite nucleus volume ω ~ w, where w is the transverse size of nanoparticles.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Effect of the Fin Shape and Thickness of the Buried Oxide on the DIBL Effect in an SOI FinFET

In this paper, we simulated the dependence of the effect of reducing the drain-induced barrier lowering on the thickness of a buried oxide layer in a finned (vertical) metal-oxide-semiconductor field effect transistor (FinFET) based on silicon-on-insulator technology. Three shapes of the fin with the rectangle, trapezoid, and triangle cross sections were considered. The drain-induced barrier lowering effect significantly depends on both the fin shape and the thickness of the buried oxide layer. The smallest drain-induced barrier lowering effect occurs when the thickness of the buried oxide layer is small for the fin of a triangular shape. This behavior of the drain-induced barrier lowering effect is strongly correlated with the behavior of the parasitic capacitance between a gate and a source.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dataset: Inferring Thermal Comfort using Body Shape Information Utilizing Depth Sensors

Thermal comfort is very important for well-being and productivity of building occupants. It has been shown that body shape is a useful feature to determine thermal comfort of individuals [2]. It is because, the heat dissipation rate of individuals depends on the body surface area. As a result, a tall and skinny person can tolerate higher room temperature than a rounded body shape person [5]. In order to test this hypothesis, we performed a year-long experiment in 2017, where we recruited 77 participants and put each of them in a thermally controlled conference room in CMU for 3 hours and recorded their subjective responses regarding thermal comfort at different temperature ranging from 60°F to 80°F. In addition, we collected depth data of individuals using a vertically mounted Microsoft Kinect for XBOX One at the entrance of the conference room to capture their body shape. We also collected biometric features (e.g., Galvanic Skin Response (GSR), skin temperature) using a Microsoft Health Band worn by the subjects. The resulting dataset provides rich information regarding how different features can be used to infer thermal comfort of the individuals.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Three-dimensional shape measurement with a fast and accurate approach

A noncontact, fast, accurate, low-cost, broad-range, full-field, easy-to-implement three-dimensional (3D) shape measurement technique is presented. The technique is based on a generalized fringe projection profilometry setup that allows each system component to be arbitrarily positioned. It employs random phase-shifting, multifrequency projection fringes, ultrafast direct phase unwrapping, and inverse self-calibration schemes to perform 3D shape determination with enhanced accuracy in a fast manner. The relative measurement accuracy can reach 1/10,000 or higher, and the acquisition speed is faster than two 3D views per second. The validity and practicability of the proposed technique have been verified by experiments. Because of its superior capability, the proposed 3D shape measurement technique is suitable for numerous applications in a variety of fields.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Net Shape Fabricated Low Cost MHK Pass-Through the Hub Turbine Blades with Integrated Health Management Technology

The primary objective of this project is to develop a three-blade MHK rotor with low manufacturing and maintenance costs. The proposed program will design, fabricate and test a novel half-scale low cost, net shape fabricated single piece three-blade MHK rotor with integrated health management technology to demonstrate significant Capital Expenditures (CAPEX) and Operational Expenditures (OPEX) cost reductions due to the novel design and manufacturing process. The proposed project is divided into three major tasks: Task 1: Single Piece Three-blade Kinetic Hydropower System (KHPS) Rotor Full-Scale and Half-Scale Design; Task 2: Composite Manufacturing Trials and Half-Scale Prototype Rotor Fabrication; and Task 3: Material Characterization and Half-Scale Prototype Test and Evaluation. These three tasks include design and analysis of full-scale and half-scale three-blade rotor prototypes using computational fluid dynamics (CFD) and finite-element analysis (FEA), demonstration of a novel half-scale net shape fabrication process, determination of a fatigue threshold composite strain allowable, three-blade rotor mold design, manufacture of half-scale rotor clam shell mold, three-blade rotor test fixture design and fabrication, development of final manufacturing and test plans, manufacture of the half-scale net shape composite single blade and three-blade prototypes, and test and evaluation of the half-scale rotor.

16 TIDAL AND WAVE POWER↗

Machining Elimination through Application of Thread Forming Fasteners in Net-Shaped Cast Holes

The ultimate objective of this work was to eliminate approximately 30% of the machining performed in typical automotive engine and transmission plants by using thread forming fasteners in as-cast holes of aluminum and magnesium cast components. The primary issues at the source of engineers reluctance to implementing thread forming fasteners in lightweight castings are: • Little proof of consistency of clamp load vs. input torque in either aluminum or magnesium castings. • No known data to understand the effect on consistency of clamp load as casting dies wear. The clamp load consistency concern is founded in the fact that a portion of the input torque used to create clamp load is also used to create threads. The torque used for thread forming may not be consistent due to variations in casting material, hole size and shape due to tooling wear and process variation (thermal and mechanical). There is little data available to understand the magnitude of this concern or to form the basis of potential solutions if the range of clamp load variation is very high (> +/- 30%). The range of variation that can be expected in as-cast hole size and shape over the full life cycle of a high pressure die casting die was established in previous work completed by Pacific Northwest National Laboratory, (PNNL). This established range of variation was captured in a set of 12 cast bosses by designing core pins at the size and draft angles identified in the sited previous work. The cast bosses were cut into nuts that could be used in the Ford Fastener Laboratory test-cell to measure clamp load when a thread forming fastener was driven into a cast nut. There were two sets of experiments run. First, a series of cast aluminum nuts were made reflecting the range of shape and size variations to be expected over the life cycle of a die casting die. Taptite thread forming fasteners, (a widely used thread forming fastener suitable for aluminum applications), were driven into the various cored, as-cast nuts at a constant input torque and resulting clamp loads were recorded continuously. The clamp load data was used to determine the range of clamp loads to be expected. The bolts were driven to failure. The clamp load corresponding to the target input of 18.5 Nm was recorded for each fastener. In a like fashion, a second set of experiments were run with cast magnesium nuts and ALtracs thread forming fasteners, (a widely used thread forming fastener suitable for magnesium applications). Again all clamp loads were recorded and analyzed similarly to the Taptites in aluminum cast nuts. Results from previous work performed on the same test cell for a Battelle project using standard M8 bolts into standard M8 nuts were included as a comparator for a standard bolt and nut application. The results for the thread forming fasteners in aluminum cast holes were well within industry expectations of +/- 30% for out of the box and robustness range testing. The results for the dry and lubed extreme conditions were only slightly higher than industry expectations at +/- 35.6%. However, when compared to the actual Battelle results (+/- 40%) for a standard bolt and nut the tread forming fasteners performed slightly better. The results for the thread forming fasteners in magnesium cast holes were all well within industry expectations of +/- 30% for all three conditions. The robustness range (.05mm larger and smaller holes than the expected wear pattern of a die casting die at full life cycle) results also fell within the industry expectations for standard threaded fasteners. These results were very encouraging. It was concluded that this work showed that clamp load variation with thread forming fasteners is consistent with industry expectations for standard steel bolts and nuts at +/- 30%. There does not appear to be any significant increase in clamp load variation due to the application of thread forming fasteners in as-cast holes of aluminum or magnesium over the effective life of a die casting mold. The fully implemented potential benefit of thread forming fasteners in as-cast holes of aluminum and magnesium is estimated to be 6 trillion Btu per year for North America. Economic benefit is estimated to be nearly $800 million per year. Environmental benefits and quality improvements will also result from full implementation of this technology.

36 MATERIALS SCIENCE↗

Assessing the Heat Transfer Modeling Capabilities of CFD Software for Involute-Shaped Plate Research Reactors

The ongoing efforts to convert High-Performance Research Reactors (HPRRs) using Highly Enriched Uranium (HEU) to Low-Enriched Uranium (LEU) fuel require reliable thermal–hydraulic assessments of modified core designs. The involute-shaped fuel plates used in several major HPRRs present unique modeling challenges due to their compact core geometries and high heat flux conditions. This study evaluates the capability of three commercial CFD tools, STAR-CCM+, COMSOL, and ANSYS CFX, to predict cladding-to-coolant heat transfer using Reynolds-Averaged Navier–Stokes (RANS) methods within the thermal–hydraulic regimes of involute-shaped plate reactors. Broad sensitivity analysis was conducted across a range of reactor-relevant parameters using two turbulence models (k−ϵ and k−ω SST) and different near-wall treatment strategies. The results were benchmarked against the Sieder–Tate correlation and experimental data from historic studies. The codes produced consistent results, showing good agreement with the empirical correlation of Sieder–Tate and the experimental measurements. The findings support the use of these commercial CFD codes as effective tools for assessing the thermal–hydraulic performance of involute-shaped plate HPRRs and guide future LEU core development.

CFD↗

Simultaneous Spark Plasma Sintering of Multiple Complex Shapes

This work addresses the two great challenges of the spark plasma sintering (SPS) process: The sintering of complex shapes and the simultaneous production of multiple parts. A new controllable interface method is employed to concurrently consolidate two nickel gear shapes by SPS. A graphite deformable sub-mold is specifically designed for the mutual densification of both complex parts in a unique 40 mm powder deformation space. An energy efficient SPS configuration is developed to allow the sintering of a large-scale powder assembly under electric current lower than 900 A. The stability of the developed process is studied by electro-thermal-mechanical (ETM) simulation. The ETM simulation reveals that homogeneous densification conditions can be attained by inserting an alumina powder at the sample/punches interfaces, enabling the energy efficient heating and the thermal confinement of the nickel powder. Finally, the feasibility of the fabrication of the two near net shape gears with a very homogeneous microstructure is demonstrated.

36 MATERIALS SCIENCE↗

Three-Lobed Shape Bifurcation of Rotating Liquid Drops

The evolution of axisymmetric equilibrium shapes of a rotating liquid drop can be extended beyond the 2-lobed shape bifurcation point if the rotating drop is driven in the n=2 axisymmetric shape oscillation (perturbation), where n is the mode of oscillation.

Drops Bifurcation Shape Oscillation↗