Search NASA⌕ Search

SEARCH · Search NASA

Results for “splitting methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Field-induced magnetization of δ -plutonium from density functional theory

Here, we present results from density functional theory (DFT) calculations of magnetization, induced by an external magnetic field, for δ-phase plutonium. The fully relativistic electronic structure accounts for Zeeman splitting effects through a Hamiltonian that couples the magnetic field to both spin and orbital magnetic moments. The electronic-structure model is further improved by an extension to DFT in terms of an orbital-orbital coupling via the conventional orbital-polarization method, as has routinely been done for plutonium. The response to the applied magnetic field is shown to be weak in the DFT model, with induced magnetic moments of the order of in magnetic fields up to 30 T. These results are in accord with recent assessments from x-ray magnetic circular dichroism measurements in magnetic field on δ-plutonium. Somewhat surprisingly, a model assuming δ-plutonium to be absent magnetic moments shows stronger response to an external static magnetic field than models allowing for antiferromagnetism or magnetic disorder.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1986

Fast algorithm for calculating chemical kinetics in turbulent reacting flow

This paper addresses the need for a fast batch chemistry solver to perform the kinetics part of a split operator formulation of turbulent reacting flows, with special attention focused on the solution of the ordinary differential equations governing a homogeneous gas-phase chemical reaction. For this purpose, a two-part predictor-corrector algorithm which incorporates an exponentially fitted trapezoidal method was developed. The algorithm performs filtering of ill-posed initial conditions, automatic step-size selection, and automatic selection of Jacobi-Newton or Newton-Raphson iteration for convergence to achieve maximum computational efficiency while observing a prescribed error tolerance. The new algorithm, termed CREK1D (combustion reaction kinetics, one-dimensional), compared favorably with the code LSODE when tested on two representative problems drawn from combustion kinetics, and is faster than LSODE.

Radhakrishnan, K.↗
NASA NTRS2006

Construction of Protograph LDPC Codes with Linear Minimum Distance

A construction method for protograph-based LDPC codes that simultaneously achieve low iterative decoding threshold and linear minimum distance is proposed. We start with a high-rate protograph LDPC code with variable node degrees of at least 3. Lower rate codes are obtained by splitting check nodes and connecting them by degree-2 nodes. This guarantees the linear minimum distance property for the lower-rate codes. Excluding checks connected to degree-1 nodes, we show that the number of degree-2 nodes should be at most one less than the number of checks for the protograph LDPC code to have linear minimum distance. Iterative decoding thresholds are obtained by using the reciprocal channel approximation. Thresholds are lowered by using either precoding or at least one very high-degree node in the base protograph. A family of high- to low-rate codes with minimum distance linearly increasing in block size and with capacity-approaching performance thresholds is presented. FPGA simulation results for a few example codes show that the proposed codes perform as predicted.

Low-density parity-check (LDPC)↗
DOE OSTI2023

Implementation of extrinsic cohesive zone model (ECZM) in 2D finite-discrete element method (FDEM) using node binding scheme

The combined finite-discrete element method (FDEM) has been widely used for rock fracturing simulations. Conventionally, FDEM is realized using the intrinsic cohesive zone model (ICZM); however, it has the drawback of artificial compliance and high computational expense. As a complement, the extrinsic cohesive zone model (ECZM) is seen to be realized in FDEM recently, whereas the node splitting scheme utilized is cumbersome. Here, within the framework of ICZM-based FDEM, we propose a node binding scheme to efficiently bind the pre-discretized finite elements and thus guarantee the continuum behavior of materials in the elastic stage. The yield surfaces, controlled by ECZM, are dynamically embedded by invoking the pre-inserted cohesive elements. The effectiveness and efficiency of the proposed approach are validated and tested by performing a suite of numerical experiments. Compared with ICZM-based FDEM, the proposed approach can correctly capture material deformation and reduce the computation cost. In contrast to the existing ECZM-based FDEM, the proposed approach can overcome the frequent and complex element topology updating. Finally, this work provides a novel perspective that fully inherits the advantages of both ICZM and ECZM, but circumvents their shortcomings, which guarantees a more efficient and effective simulation of brittle material evolution from continuum to discontinuum.

58 GEOSCIENCES↗
NASA NTRSDate not supplied

Machine Learning Emulators and Empirical Models Combining Climate and Global Crop Models for Seasonal Agricultural Production

We present results from several connected efforts to apply machine learning methods to estimates of seasonal agricultural production anomalies around the world. First, we apply the XGBoost Random Forest method to fit emulators that mimic global crop models participating in the Agricultural Model Intercomparison and Improvement Project (AgMIP) Global Gridded Crop Model Intercomparison (GGCMI). These are the same models used in the agricultural sector simulations of the Inter-Sectoral Impacts Model Intercomparison Project (ISIMIP). These emulators use 8 climate variables split across 5 sub-seasonal representations of the growing season for each ½ degree grid cell around the world for maize, wheat, rice and soybeans. Emulators are useful for estimating conditions that have not already been simulated by GGCMI (e.g., in a seasonal prediction model) and also to diagnose model differences and capabilities. For example, emulators of the pDSSAT maize model tend to be more reliant on mean temperatures than the LPJmL model, and few models have strong responses to cold extremes. Second, we use a similar XGBoost approach to fit empirical models for national production data for the top 20 producing countries according to the United Nations Food and Agricultural Organization (FAO). Models utilize both climate observations and the GGCM models as predictors, resulting in skillful models for many (but not all) top producing-countries. The patterns of climate and crop model features selected indicate regions and systems that are better or worse simulated by the GGCMs. For example, information in cold extreme predictors is often combined with GGCM output predictors to provide sensitivity that models may underrepresent.

machine learning↗
DOE OSTI2025

Discovery and Synthesis of a Family of Boride Altermagnets

Borides are a rich material family. To push the boundaries of borides’ properties and applications into broader fields, we have conducted systematic theoretical and experimental searches for synthesizable phases in ternary borides TM 2 B 2 (T = 3d, M = 4d/5d transition metals). We find that TM 2 B 2 in the FeMo 2 B 2 -type and CoW 2 B 2 -type structures form a large family of stable/metastable materials of 120 members. Among them, we identify 40 materials with stable magnetic solutions. Further, we discover 11 altermagnets in the FeMo 2 B 2 -type structure. So far, boride altermagnets are rare. In these altermagnets, T = Fe or Mn atoms are arranged in parallel T-chains with strong ferromagnetic intrachain couplings and antiferromagnetic interchain couplings. They simultaneously exhibit electronic band spin splitting, typical of ferromagnetism, and zero net magnetization, typical of antiferromagnetism. They also exhibit magnonic band chiral splitting. Both effects originate from the unique altermagnetic symmetries crucially constrained by the nonmagnetic atoms in the structure. Transport properties of relevance to spintronic applications, including the strain-induced spin-splitter effect and anomalous Hall effect, are predicted. An iodine-assisted synthesis method for TM 2 B 2 is developed, using which 7 of the predicted low-energy phases are experimentally synthesized and characterized, including 4 altermagnets. This work expands the realm of borides by offering new opportunities for studying altermagnetism and altermagnons in borides. It also provides valuable insights into the discovery and design of altermagnets. Here, by demonstrating that altermagnets can exist as families sharing a common motif, this work paves a feasible route for discovering altermagnets by elemental substitutions and high-throughput computations.

Chemical structure↗
DOE OSTI2020

Evaluating aqueous flow battery electrolytes: a coordinated approach

Here, we outline some basic pitfalls in the electrochemical investigation of aqueous metal complexes and advocate for the use of bulk electrolysis in redox flow cells for electrolyte analysis. We demonstrate the methods of operation and performance of a lab scale redox flow battery (RFB), which is assembled from unmodified, commercially available material and cycled with a vanadium electrolyte in order to provide a comparative baseline of expected performance. Common misconceptions about the thermodynamic window for water splitting are addressed and further express the need to develop next-generation aqueous redox flow battery electrolytes. Although non-aqueous electrolytes are a popular approach, they suffer from distinct challenges that limit energy and power density in comparison with aqueous electrolytes. Expanding the scope of aqueous electrolytes to include metal–chelate complexes allows electrolytes to be as tailorable as organic species, while maintaining robust metal-based redox processes. A flow battery assembly and operation guide is provided to help facilitate the use of flow battery testing in the evaluation of next-generation electrolytes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

The sea of quarks and antiquarks in the nucleon

The quark and gluon structure of the proton has been under intense experimental and theoretical investigation for five decades. Even for the distributions of the well-studied valence quarks, challenges such as the value of the down quark to up quark ratio at high fractional momenta remain. Much of the sea of quark-antiquark pairs emerges from the splitting of gluons and is well described by perturbative evolution in quantum chromodynamics. However, experiments confirm that there is a non-perturbative component to the sea that is not well understood and hitherto has been difficult to calculate with ab initio non-perturbative methods. This non-perturbative structure shows up, perhaps most directly, in the flavor dependence of the sea antiquark distributions. Even though some of the general trends can be reproduced by models, there are features of the data that do not seem to be well described. Conclusively, this article discusses the experimental situation, the status of calculations and models, and the directions where these studies will progress in the near future.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Towards revealing intrinsic vortex-core states in Fe-based superconductors through statistical discovery

Abstract In type-II superconductors, electronic states within magnetic vortices hold crucial information about the paring mechanism and can reveal non-trivial topology. While scanning tunneling microscopy/spectroscopy (STM/S) is a powerful tool for imaging superconducting vortices, it is challenging to isolate the intrinsic electronic properties from extrinsic effects like subsurface defects and disorders. Here we combine STM/STS with basic machine learning to develop a method for screening out the vortices pinned by embedded disorder in iron-based superconductors. Through a principal component analysis of large STS data within vortices, we find that the vortex-core states in Ba(Fe 0.96 Ni 0.04 ) 2 As 2 start to split into two categories at certain magnetic field strengths, reflecting vortices with and without pinning by subsurface defects or disorders. Our machine-learning analysis provides an unbiased approach to reveal intrinsic vortex-core states in novel superconductors and shed light on ongoing puzzles in the possible emergence of a Majorana zero mode.

Guo, Yueming↗
DOE OSTI2018

Reexamining the isospin-relaxation time in intermediate-energy heavy-ion collisions

Isospin-relaxation times characterizing isospin transport processes between the projectile and the target with different N/Z ratios and that between the neck and the spectator with different isospin asymmetries and densities in intermediate-energy heavy-ion collisions are studied within an isospin-dependent Boltzmann-Uehling-Uhlenbeck transport model using the lattice Hamiltonian approach. The respective roles and timescales of the isospin diffusion and drift as the major mechanisms of isospin transport in intermediate-energy heavy-ion collisions are discussed. Finally, effects of nuclear symmetry energy and neutron-proton effective mass splitting on the isospin relaxation times are examined.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1998

Stable Inversion for Nonlinear Nonminimum-Phase Time Varying Systems

In this paper, we extend stable inversion to nonlinear time-varying systems and study computational issues; the technique is applicable to minimum-phase as well as nonminimum-phase systems. The inversion technique is new, even in the linear time-varying case, and relies on partitioning (the dichotomic split of) the linearized system dynamics into time-varying, stable, and unstable, submanifolds. This dichotomic split is used to build time-varying filters which are, in turn, the basis of a contraction used to find a bounded inverse input-state trajectory. Finding the inverse input-state trajectory allows the development or exact-output tracking controllers. The method is local to the time-varying trajectory and requires that the internal dynamics vary slowly; however, the method represents a significant advance relative to presently available tracking controllers. Present techniques are restricted to time-invariant nonlinear systems and, in the general case, track only asymptotically.

Devasia, S.↗
DOE OSTI2022

Hybrid RANS-LES of the Atmospheric Boundary Layer for Wind Farm Simulations: Preprint

Wind farm simulations often do not accurately represent wake-atmospheric boundary layer (ABL) interactions, blade boundary layer (BL) dynamics, and turbine-turbine interactions. In this work, we use Active Model Split (AMS), a new hybrid Reynolds-Averaged Navier Stokes (RANS)-large eddy simulation (LES) model, which is well suited to capture these effects because the model can (i) accurately simulate the ABL with the Coriolis effect, (ii) is accurate in adverse pressure gradients such as those near wind turbine blades, and (iii) has sufficiently low computational cost to simulate multiple turbines while resolving the blade BL. For simplicity and consistency we develop AMS to be used throughout the domain rather than in a zonal method. We implement our work in the massively parallel flow solver, Nalu-Wind, so that our model can access the compute resources needed for blade-resolved simulations of multiple wind turbines. To accomplish these aims, we modify the baseline AMS by changing the RANS contribution to SST k - omega with a length scale limiter, adding the Coriolis effect, and developing an appropriate wall treatment. We show that AMS of the ABL with the Coriolis effect matches LES reference results better than those obtained with RANS. We describe our plans to add buoyancy effects and wind turbines to our AMS simulations.

atmospheric boundary layer↗
DOE OSTI2018

Developing Novel Multifunctional Materials for High-Efficiency Electrical Energy Storage

This is the final report for the program “Developing Novel Multifunctional Materials for High-efficiency Electrical Energy Storage”, funded by The U.S. Department of Energy’s (DOE) National Energy Technology Laboratory (NETL), and performed by University of Tennessee, from September 01, 2013 to August 31, 2018. Securing a sustainable energy economy by developing affordable and clean energy from renewable energy is a central element to the mission of DOE/NETL. To further this mission, NETL funds research and development of novel multifunctional materials that can be used for high-efficiency electrical energy storage. The main objective of this research program is to conduct fundamental and applied research that lead to successful development and demonstration of novel multifunctional materials, which can improve the efficiency and reduce the cost of hydrogen production with water electrolysis. The specific objectives of this research program include: 1) Design, fabrication and demonstration of thin/well-tunable liquid/gas diffusion layer (TT-LGDLs) with different pore morphologies, including pore sizes and pore porosities. 2) Development of comprehensive computational models of proton exchange membrane water electrolyzer cell (PEMECs) for the investigation of influence of different operating conditions and physical design parameters on its performance. 3) Surface modification of TT-LGDLs for better catalyst access and product/reactant removal, and smaller interfacial contact resistance (ICR). To achieve the above challenging goals, a multidisciplinary research team was formed to work on fundamental and applied research on the following three major technical areas: 1) Design, fabrication and demonstration of thin/well-tunable LGDLs (TT-LGDLs) by using photolithography and wet etching of thin titanium (Ti) foils. During the project period, the team has successfully fabricated TT-LGDLs with different pore morphologies, including pore sizes and pore porosities. The manufacturing steps mainly include cleaning thin Ti foil, supporting the foils, applying photoresist, patterning the photoresist with designed mask, exposing and developing, etching, removing photoresist, and lift-off and cleaning. The manufactured TT-LGDLs were characterized with optical microscopies and scanning electron microscopies. Their pore morphologies, including pore size and porosity, were derived based on advanced image process. The feasibility for scale-up manufacturing has been demonstrated. The TT-LGDLs have been successfully investigated for water splitting in PEMECs, which showing better performance than their counterparts fabricated with the traditional fiber-based materials. 2) Comprehensive computational modeling of a PEMEC. A comprehensive computational model has been successfully developed, and the influence of different operating conditions and physical design parameters on its performance has been investigated, including operating temperature, pressure, exchange current density, electrode thickness, membrane thickness, and interfacial resistance. Results obtained from the present model provide a comprehensive understanding of design parameter effects and consequently improve the design/performance in a PEMEC. 3) Surface modification of TT-LGDLs. The proposed surface modifications of TT-LGDLs by sputter coating and/ electroplating have been successfully demonstrated. It has been found that the performance of PEMECs can be improved by both methods, and the thickness of the electroplated gold thin layer has limited effects on the performance. With the help of the surface modifications, the PEMECs achieved the best ever performance compared with the public literatures. In addition to completion of the proposed method, microporous layers (MPLs) with both irregular micro and sphere nano titanium particles on novel TT-LGDLs was developed for the first time. The MPLs were fabricated by a low-temperature air spraying method, which provide a better catalyst access and product/reactant removal. In summary, under the close collaborations among the research team, all the tasks have been completed and the proposed research objectives have been fulfilled. All the technical milestones have been achieved and the project has been completed successfully. The technical breakthroughs obtained under this project provide novel LGDLs with well-tunable pore morphologies that can significantly improve the performance of water splitting and energy storage. This development can be directly used in existing and next generation energy storage and fuel systems.

08 HYDROGEN↗
DOE OSTI2020

Cryogenic Correlative Single-Particle Photoluminescence Spectroscopy and Electron Tomography for Investigation of Nanomaterials

Cryogenic single-particle photoluminescence (PL) spectroscopy has been used with great success to directly observe the heterogeneous photophysical states present in a population of luminescent particles. Cryogenic electron tomography provides complementary nanometer scale structural information to PL spectroscopy, but the two techniques have not been correlated due to technical challenges. Here, we present a method for correlating single-particle information from these two powerful microscopy modalities. We simultaneously observe PL brightness, emission spectrum, and in-plane excitation dipole orientation of CdSSe/ZnS quantum dots suspended in vitreous ice. Stable and fluctuating emitters were observed, as well as a surprising splitting of the PL spectrum into two bands with an average energy separation of 80 meV. In some cases, the onset of the splitting corresponded to changes in the in-plane excitation dipole orientation. These dynamics were assigned to structures of individual quantum dots and the excitation dipoles were visualized in the context of structural features.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

A General Solution Route to Nanoporous Metal Oxide Films

Metal oxide semiconductors are of interest as efficient, stable, and low-cost photoanode materials for photoelectrochemical water splitting, but their characteristically poor charge transport properties remain a fundamental challenge to practical use. Nanoporous metal oxide films that feature open bicontinuous networks of nanocrystals and nanopores can overcome such inefficient charge transport to enable high-performance photoanodes. Here, this paper describes a general method to make high-quality nanoporous films of metal oxides by spin coating and calcining molecular inks that contain a porosity-generating block copolymer. Phase-pure nanoporous films of BiFeO 3 , FeWO 4 , WO 3 , Fe 2 O 3 , and TiO 2 serve to demonstrate the versatility of the approach. It is demonstrated that the crystallite size, film porosity, and film thickness can be independently tuned by adjusting the ink composition and film processing conditions. The method is extended to fabricate core–shell nanoporous films consisting of a nanoporous film coated in a thin shell of a second metal oxide, using WO 3 –BiVO 4 and BiFeO 3 –BiVO 4 as examples. Given its simplicity and flexibility, this solution-phase route should prove useful for making nanoporous films of many different materials for a variety of applications, including energy conversion and storage, catalysis, and chemical sensing.

coating materials↗
DOE OSTI2023

Sneaking in SpyCatcher using cell penetrating peptides for in vivo imaging

Abstract In vivo imaging of protein complexes is a powerful method for understanding the underlying biological function of these key biomolecules. Though the engineering of small, high affinity nanobodies have become more prevalent, the off-rates of these tags may result in incomplete or partial labeling of proteins in live cells. The SpyCatcher003 and SpyTag split protein system allow for irreversible, covalent binding to a short target peptide unlike nanobody-affinity based probes. However, delivering these tags into a cell without disrupting its normal function is a key challenge. Cell penetrating peptides (CPPs) are short peptide sequences that facilitate the transduction of otherwise membrane-impermeable ‘cargo’ , such as proteins, into cells. Here we report on our efforts to engineer and characterize CPP-SpyCatcher003 fusions as modular imaging probes. We selected three CPPs, CUPID, Pentratin, and pVEC, to engineer fusion protein probes for superresolution microscopy, with the aim to eliminate prior permeabilization treatments that could introduce imaging artifacts. We find that fusing the CPP sequences to SpyCatcher003 resulted in dimer and multimer formation as determined by size exclusion chromatography, dynamic light scattering, and SDS resistant dimers on SDS-PAGE gels. By isolating and labeling the monomeric forms of the engineered protein, we show these constructs retained their ability to bind SpyTag and all three CPP sequences remain membrane active, as assessed by CD spectroscopy in the presence of SDS detergent. Using fluorescence and super resolution Lattice structured illumination microscopy (Lattice SIM) imaging we show that the CPPs did not enhance uptake of SpyCatcher by E. coli, however with Caulobacter crescentus cells, we show that Penetratin, and to a lesser degree CUPID, does enhance uptake. Our results demonstrate the ability of the CPP-SpyCatcher003 to label targets within living cells, providing the groundwork for using split protein systems for targeted in vivo imaging.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

A Thermogravimetric Temperature-Programmed Thermal Redox Protocol for Rapid Screening of Metal Oxides for Solar Thermochemical Hydrogen Production

As combinatorial and computational methods accelerate the identification of potentially suitable thermochemically-active oxides for use in solar thermochemical hydrogen production (STCH), the onus shifts to quickly evaluating predicted performance. Traditionally, this has required an experimental setup capable of directly carrying out a two-stage thermochemical water-splitting process. But this can be a difficult endeavor, as most off-the-shelf equipment cannot adequately deal simultaneously with the high temperatures, varying oxygen partial pressures, and high H 2 O partial pressures required; achieving sufficient temporal sensitivity to accurately quantify the kinetics is also a major challenge. However, as proposed here, a less complicated experiment can be used as a first screening for thermochemical water splitting potential. Temperature-Programmed Thermal Redox (TPTR) using thermogravimetry evaluates the thermal reduction behavior of materials. This technique does not require water splitting or CO 2 -splitting analogs but can nonetheless predict water-splitting performance. Three figures of merit are obtained from the TPTR experiment: reduction onset temperature, extent of reduction, and extent of recovery upon reoxidation. These metrics can collectively be used to determine if a material is capable of thermochemical water-splitting, and, to good approximation, predict whether the thermodynamics are favorable for use under more challenging high-conversion conditions. This paper discusses the pros and cons of using TPTR and proposes a protocol for use within the STCH community.

08 HYDROGEN↗
NASA NTRS1989

A time accurate finite volume high resolution scheme for three dimensional Navier-Stokes equations

A time accurate, three-dimensional, finite volume, high resolution scheme for solving the compressible full Navier-Stokes equations is presented. The present derivation is based on the upwind split formulas, specifically with the application of Roe's (1981) flux difference splitting. A high-order accurate (up to the third order) upwind interpolation formula for the inviscid terms is derived to account for nonuniform meshes. For the viscous terms, discretizations consistent with the finite volume concept are described. A variant of second-order time accurate method is proposed that utilizes identical procedures in both the predictor and corrector steps. Avoiding the definition of midpoint gives a consistent and easy procedure, in the framework of finite volume discretization, for treating viscous transport terms in the curvilinear coordinates. For the boundary cells, a new treatment is introduced that not only avoids the use of 'ghost cells' and the associated problems, but also satisfies the tangency conditions exactly and allows easy definition of viscous transport terms at the first interface next to the boundary cells. Numerical tests of steady and unsteady high speed flows show that the present scheme gives accurate solutions.

Liou, Meng-Sing↗