Search NASA⌕ Search

SEARCH · Search NASA

Results for “standard problem”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Probabilistic inference in very large universes

Our current favored cosmological theories allow for the striking and controversial possibility that the observable universe is just a small part of a much larger universe in which parameters that describe the effective, low-energy laws of physics vary from one region to another. The controversy is largely driven by the fact that such a “very large universe” is mostly observationally inaccessible to us, so the issue arises of how we can reasonably assess a theory that describes such a universe. In this paper, we propose a Bayesian method for theory assessment based on theory-generated probability distributions for our observations. We focus on the principles that define this method, leaving aside concerns about how, in practice, one would carry out the required calculations. (One important issue that we set aside is the measure problem.) We argue that cosmological theories can be tested by the standard method of Bayesian updating, but we need to use theoretical predictions for “first-person” probabilities—that is, probabilities that we should use for our observations, taking into account all relevant selection effects. These selection effects can vary from one observer to another and can vary with time, so, in principle, first-person probabilities are defined for each observer instant—an observer at a specific instant of time. Calculations of first-person probabilities should take into account everything that the observer believes about herself and her surroundings, which we refer to as her subjective state. If the universe is very large, a theory might predict that there are many observer instants in the same subjective state; we argue that first-person probabilities should be calculated using a principle of self-locating indifference (PSLI), the assumption that any real observer should make predictions for her future as if she were chosen randomly and uniformly from the theoretically predicted observer instants that share her subjective state. We believe the PSLI is intuitively very reasonable, but we also argue that, if the theory is correct, the use of this principle maximizes the expected fraction of observers who will make correct predictions. A further complication is that cosmological theories are not expected to fully predict the detailed properties of the universe, but rather will predict a set of possible universes, each with a probability. Different possible universes will generically have different numbers of observers. We argue that, in the calculation of first-person probabilities, the probability for each possible universe should be weighted by the number of observer instants in the specified subjective state that it contains. These issues have been controversial in the literature, so we also provide a rebuttal to the claim that principles like the PSLI involve a “selection fallacy”; a rebuttal to what we dub the principle of required certainty; an argument rejecting theories that predict a preponderance of Boltzmann brains; a rebuttal to a parable about humans and Jovians used by Hartle and Srednicki to argue that assumptions of typicality can lead to absurd consequences; and, finally, a discussion about how the use of “old evidence” can be fit into a Bayesian mold.

Azhar, Feraz [University of Notre Dame, IN (United↗

Simplified Models for a First Characterization of New Physics at the LHC

Low-energy SUSY and several other theories that address the hierarchy problem predict pair-production at the LHC of particles with Standard Model quantum numbers that decay to jets, missing energy, and possibly leptons. If an excess of such events is seen in LHC data, a theoretical framework in which to describe it will be essential to constraining the structure of the new physics. We propose a basis of four deliberately simplified models, each specified by only 2-3 masses and 4-5 branching ratios, for use in a first characterization of data. Fits of these simplified models to the data furnish a quantitative presentation of the jet structure, electroweak decays, and heavy-flavor content of the data, independent of detector effects. These fits, together with plots comparing their predictions to distributions in data, can be used as targets for describing the data within any full theoretical model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

QAOAKit: A Toolkit for Reproducible Study, Application, and Verification of the QAOA

Understanding the best known parameters, performance, and systematic behavior of the Quantum Approximate Optimization Algorithm (QAOA) remain open research questions, even as the algorithm gains popularity. We introduce QAOAKit, a Python toolkit for the QAOA built for exploratory research. QAOAKit is a unified repository of preoptimized QAOA parameters and circuit generators for common quantum simulation frameworks. We combine, standardize, and cross-validate previously known parameters for the MaxCut problem, and incorporate this into QAOAKit. We also build conversion tools to use these parameters as inputs in several quantum simulation frameworks that can be used to reproduce, compare, and extend known results from various sources in the literature. We describe QAOAKit and provide examples of how it can be used to reproduce research results and tackle open problems in quantum optimization.

Shaydulin, Ruslan↗

Conservative High-Order Time Integration for Lagrangian Hydrodynamics

In tis study, we develop novel time integration methods for the compressible Euler equations in the Lagrangian frame that are of arbitrary high order and exactly preserve the mass, momentum, and total energy of the system. The equations are considered in nonconservative form, that is, common for staggered grid hydrodynamics (SGH) methods; namely, the evolved quantities are mass, momentum, and internal energy. A general family of time integration schemes is formulated, and practical pairs for orders three and four are derived. Numerical results on standard hydrodynamics benchmarks confirm the high-order convergence on smooth problems and the exact numerical preservation of all physically conserved quantities.

97 MATHEMATICS AND COMPUTING↗

Getting To Exascale: Applying Novel Parallel Programming Models To Lab Applications For The Next Generation Of Supercomputers

As supercomputing moves toward exascale, node architectures will change significantly. CPU core counts on nodes will increase by an order of magnitude or more. Heterogeneous architectures will become more commonplace, with GPUs or FPGAs providing additional computational power. Novel programming models may make better use of on-node parallelism in these new architectures than do current models. In this paper we examine several of these novel models – UPC, CUDA, and OpenCL –to determine their suitability to LLNL scientific application codes. Our study consisted of several phases: We conducted interviews with code teams and selected two codes to port; We learned how to program in the new models and ported the codes; We debugged and tuned the ported applications; We measured results, and documented our findings. We conclude that UPC is a challenge for porting code, Berkeley UPC is not very robust, and UPC is not suitable as a general alternative to OpenMP for a number of reasons. CUDA is well supported and robust but is a proprietary NVIDIA standard, while OpenCL is an open standard. Both are well suited to a specific set of application problems that can be run on GPUs, but some problems are not suited to GPUs. Further study of the landscape of novel models is recommended.

97 MATHEMATICS AND COMPUTING↗

Exact Timestep for a Pairwise Coulomb Collision

Standard numerical integrators work well for many-body Coulomb repulsion problems when the timestep is much shorter than the timescale of relative position changes. However, for ‘hard’ collisions in which two particles have a near miss and exchange a lot of momentum within one timestep, they understandably struggle. This note proposes using the exact solution of Keplerian two-body orbits (usually hyperbolic) to calculate the momentum exchange with other particles: either a selection of the ‘closest’ ones or all of them.

43 PARTICLE ACCELERATORS↗

Numerical Calculations Demonstrating Complete Stabilization of the Ideal Magnetohydrodynamic Resistive Wall Mode by Longitudinal Flow

The cylindrical ideal magnetohydrodynamic (MHD) stability problem, including ow and a resistive wall, is cast in the standard mathematical form, ωA∙x = B∙x, without discretizing the vacuum regions surrounding the plasma. This is accomplished by means of a finite element expansion for the plasma perturbations, by coupling the plasma surface perturbations to the resistive wall using a Green's function approach, and by expanding the unknown vector, x, to include the perturbed current in the resistive wall as an additional degree of freedom. The ideal MHD resistive wall mode (RWM) can be stabilized when the plasma has a uniform equilibrium ow such that the RWM frequency resonates with the plasma's Doppler-shifted sound continuum modes. The resonance induces a singularity in the parallel component of the plasma perturbations, which must be adequately resolved. Complete stabilization within the ideal MHD model (i.e. without parallel damping being added) is achieved as the grid spacing in the region of the resonance is extrapolated to 0 step size

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Manual and automatic flight control during severe turbulence penetration

In this paper, updated pilot/display/aircraft analysis techniques are applied to the problem of turbulence upset. In the course of an investigation of standard operating procedures and current autopilot turbulence modes, it was found that an improved turbulence penetration system is needed. A simulation was conducted to evaluate the turbulence autopilot and flight director concepts. It was found that an energy management system comprising the integrated autopilot and thrust director provided the greatest decrease in pilot work load and improvement in performance.

Johnston, D. E.↗

The design, development, fabrication and testing of two (2) Non-Spin Platforms, (NSP)

The non spin platform is a means for achieving the very low acceleration requirements for cost effective space processing experiments on research rocket flights. These platforms have a low initial cost, are re-usable and have extremely low refurbishment cost. In order to attain this goal, commercially available components were used and only the necessary quality control standards were imposed. A detailed system description, the very few design problems encountered, the operational procedures (both pre-flight and post-flight), and the maintenance requirements are described.

Source record↗

Procedures used in flight tests of an integrated propulsion control system on an F-111E airplane

A digital integrated propulsion control system (IPCS) was tested on an F-111E airplane. The IPCS provided full authority control of the left inlet and the TF30 afterburning engine. Supersonic test conditions were of primary interest. The operational procedures and maneuvers developed for IPCS evaluation, displays for test monitoring and data acquisition, flight safety, and problems encountered are discussed. The software refinements that made modifications to standard flight test procedures necessary are described. The flexibility of digital control and the ways software was used to overcome hardware deficiencies are discussed. Application of these procedures to a typical IPCS flight is described.

Baer, J. L.↗

Gas turbine engine emissions - Problems, progress and future

The current status of the problem of gas turbine engine emissions is reviewed. Presently promulgated EPA standards and their implications for aircraft gas turbines are discussed. The progress and status of emissions reduction technology programs and other efforts which have emphasized advanced combustor technology are reviewed in detail. Also examined are those efforts underway to determine the emissions floor and incorporate those techniques into practical combustors of the future.

Jones, R. E.↗

Direct determination of asteroid diameters from occultation observations

Of the available earth-based techniques for determining asteroid diameters, observation of stellar occultations involving asteroids is clearly the most direct. The high degree of accuracy achievable by this method has already been demonstrated in the case of Pallas, whose mean diameter has been measured with a standard error of plus or minus 2%. In this paper the problems, results and prospects of the stellar occultation technique are reviewed. It is shown that, with the use of a network of small, portable telescopes, the method is currently applicable to a large number of asteroids. The best results can be expected for asteroids of large angular diameter and regular shape. The potential of lunar occultation observations for asteroid diameter measurements is also briefly discussed.

Millis, R. L.↗

A new asymptotic method for jump phenomena

Physical phenomena involving rapid and sudden transitions, such as snap buckling of elastic shells, explosions, and earthquakes, are characterized mathematically as a small disturbance causing a large-amplitude response. Because of this, standard asymptotic and perturbation methods are ill-suited to these problems. In the present paper, a new method of analyzing jump phenomena is proposed. The principal feature of the method is the representation of the response in terms of rational functions. For illustration, the method is applied to the snap buckling of an elastic arch and to a simple combustion problem.

Reiss, E. L.↗

Handbook for the estimation of microwave propagation effects: Link calculations for earth-space paths (path loss and noise estimation)

A single model for a standard of comparison for other models when dealing with rain attenuation problems in system design and experimentation is proposed. Refinements to the Global Rain Production Model are incorporated. Path loss and noise estimation procedures as the basic input to systems design for earth-to-space microwave links operating at frequencies from 1 to 300 GHz are provided. Topics covered include gaseous absorption, attenuation by rain, ionospheric and tropospheric scintillation, low elevation angle effects, radome attenuation, diversity schemes, link calculation, and receiver noise emission by atmospheric gases, rain, and antenna contributions.

Crane, R. K.↗

The ionization structure of planetary nebulae. 3: NGC 7009

Spectrophotometric observations of emission line intensities were made in 8 positions in the planetary nebula NGC 7009. For the 6 brightest positions, the coverage is from 1400 A to 10,000 A. Standard equations used to correct for the existence of elements in other than the optical observable ionization stages give results over a wide range of ionization that are consistent and agree with abundances calculated using ultraviolet lines. This result is particularly gratifying for N because previously the standard formula gave inconsistent abundances in NGC 7009. The major outstanding problem is that the lambda 4267 CII line implies a C(2+) abundance as much as 12 times greater than that determined from the UV lines. This discrepancy is greatest nearest the central star, as is the case in the planetary nebula NGC 6720. The logarithmic abundances (relative to H=12.00) are: He=11.07, 0=8.68, N=8.10, Ne=8.16, C=8.18, Ar=6.36, and S=7.12. The average of the Ne, Ar, and S abundances agrees to within 5% of that for NGC 6720, but the O, N, nd C abundances average 1.9 times lower in NGC 7009, suggesting that here may have been mixing of processed material in the planetary precursor in NGC 6720.

Barker, T.↗

Classical free-streamline flow over a polygonal obstacle

In classical Kirchhoff flow, an ideal incompressible fluid flows past an obstacle and around a motionless wake bounded by free streamlines. Since 1869 it has been known that in principle, the two-dimensional Kirchhoff flow over a polygonal obstacle can be determined by constructing a conformal map onto a polygon in the log-hodograph plane. In practice, however, this idea has rarely been put to use except for very simple obstacles, because the conformal mapping problem has been too difficult. This paper presents a practical method for computing flows over arbitrary polygonal obstacles to high accuracy in a few seconds of computer time. We achieve this high speed and flexibility by working with a modified Schwarz-Christoffel integral that maps onto the flow region directly rather than onto the log-hodograph polygon. This integral and its associated parameter problem are treated numerically by methods developed earlier by Trefethen for standard Schwarz-Christoffel maps.

Elcrat, A. R.↗

Classical free-streamline flow over a polygonal obstacle

In classical Kirchhoff flow, an ideal incompressible fluid flows past an obstacle and around a motionless wake bounded by free streamlines. Since 1869 it has been known that in principle, the two-dimensional Kirchhoff flow over a polygonal obstacle can be determined by constructing a conformal map onto a polygon in the log-hodograph plane. In practice, however, this idea has rarely been put to use except for very simple obstacles, because the conformal mapping problem has been too difficult. This paper presents a practical method for computing flows over arbitrary polygonal obstacles to high accuracy in a few seconds of computer time. We achieve this high speed and flexibility by working with a modified Schwarz-Christoffel integral that maps onto the flow region directly rather than onto the log-hodograph polygon. This integral and its associated parameter problem are treated numerically by methods developed earlier by Trefethen for standard Schwarz-Christoffel maps.

Elcrat, A. R.↗

Problems related to aircraft noise in Switzerland

Some of the problems related to aircraft noise such as aircraft noise indices, immission standards, land use planning, en route noise and general sensitivity to noise are briefly discussed.

Rabinowitz, J.↗